All Stories

  1. Comparison of degradation kinetics derived from heat-flow and mass-loss signals: a combined TGA-DSC-FTIR study of PLLA and PHBV
  2. Isopropanol Dehydration to Propylene: The Impact of Acid–Base Sites Strength, Dispersion and Nature
  3. Effect of Silica- and Cellulose-Based Nanofillers in Poly(butylene succinate-co-butylene adipate)-Based Composites
  4. Dissolution kinetics of poly(styrene-co-acrylonitrile) below and above its glass transition temperature
  5. Thermal behavior investigation of bitumen embedding sodium nitrate: A non-isothermal study
  6. Determination of Thermal Transitions in Polyesters by Temperature-Dependent FTIR Spectroscopy
  7. Dissolution–Precipitation Recycling of PET: Impact on the Physico‐Chemical Properties of Recycled Products
  8. Crystallization behavior of biobased poly(butylene furandicarboxylate) (PBF): Influence of amorphous chain mobility, diffusion and nucleation on thermodynamic and kinetic control
  9. Isoconversional kinetics of enthalpy recovery in glass annealed into equilibrium
  10. Nonisothermal Crystallization Kinetics as a Probe for Molecular Interactions in Biobased Semiaromatic Polyester. The Effect of Furan, Thiophene, and Benzene Ring
  11. Bioderived Green Algae Metabolite as a Latent Cross-Linking Agent for Protein-Based Hydrogels with High Potential for Skin Repair Applications
  12. Catalytic Effect of Eutectic Hardeners to Polymerize Epoxidized Vegetable Oil for the Synthesis of Fully Biobased Thermosets at Low Temperatures
  13. Poly(ethylene 2,5-furandicarboxylate) pole figures to determine the microstructural scheme upon uniaxial stretching: Link between orientation and crystallisation
  14. Exploring and Understanding the Recycling of a Bio-Based Epoxy Thermoset via Saponification
  15. Low-Viscosity Eutectic Hardeners for More Sustainable Cross-Linking Conditions
  16. Advanced isoconversional kinetic analysis: Insight in mechanisms and simulations. Successes and future
  17. Isoconversional methods as single-step kinetic approximation
  18. Two step model for crosslinking polymerization with account of diffusion
  19. Kinetics and mechanism of nonisothermal crystallization of biobased poly(hexamethylene 2,5-furan dicarboxylate)
  20. Kinetic analysis of pyrolysis and thermal oxidation of bitumen
  21. Nonisothermal Crystallization Kinetics by DSC: Practical Overview
  22. Mechanical Behaviour and Induced Microstructural Development upon Simultaneous and Balanced Biaxial Stretching of Poly(ethylene furandicarboxylate), PEF
  23. Cross-Linking Mechanisms of a Rigid Plant Oil-Based Thermoset from Furfural-Derived Cyclobutane
  24. Kinetic analysis of complex chemical reactions by coupling model-free and model-fitting analysis
  25. Radical Oxidation of Itaconic Acid-Derived Unsaturated Polyesters under Thermal Curing Conditions
  26. Furanic Humins from Biorefinery as Biobased Binder for Bitumen
  27. Suberin from Cork as a Tough Cross-Linker in Bioepoxy Resins
  28. Comparative Analysis of the Mechanical Behaviour of PEF and PET Uniaxial Stretching Based on the Time/Temperature Superposition Principle
  29. Model-free isothermal and nonisothermal predictions using advanced isoconversional methods
  30. Natural fibre composites with furanic thermoset resins. Comparison between polyfurfuryl alcohol and humins from sugar conversion
  31. Non-Furanic Humins-Based Non-Isocyanate Polyurethane (NIPU) Thermoset Wood Adhesives
  32. A rigid plant oil-based thermoset with a furfural-derived cyclobutane cross-linker
  33. Cross-linking behavior of eutectic hardeners from natural acid mixtures
  34. Ambient Temperature Self-Blowing Tannin-Humins Biofoams
  35. Conformational Change Analysis of Poly(ethylene 2,5-furandicarboxylate) and Poly(ethylene terephthalate) under Uniaxial Stretching
  36. Interpretation and Physical Meaning of Kinetic Parameters Obtained from Isoconversional Kinetic Analysis of Polymers
  37. Polymerization kinetic pathways of epoxidized linseed oil with aliphatic bio‐based dicarboxylic acids
  38. Eutectic hardener from food-based chemicals to obtain fully bio-based and durable thermosets
  39. Humin based resin for wood modification and property improvement
  40. Kinetics and Chemorheological Analysis of Cross-Linking Reactions in Humins
  41. Suberin/trans-Cinnamaldehyde Oil Nanoparticles with Antimicrobial Activity and Anticancer Properties When Loaded with Paclitaxel
  42. Crystallization of Polytetrafluoroethylene in a Wide Range of Cooling Rates: Nucleation and Diffusion in the Presence of Nanosilica Clusters
  43. Advanced Isoconversional Kinetic Analysis for the Elucidation of Complex Reaction Mechanisms: A New Method for the Identification of Rate-Limiting Steps
  44. Synthesis and characterization of two new biobased poly(pentylene 2,5-furandicarboxylate-co-caprolactone) and poly(hexamethylene 2,5-furandicarboxylate-co-caprolactone) copolyesters with enhanced enzymatic hydrolysis properties
  45. Thermal Properties of Biobased Polymers: Furandicarboxylic Acid (FDCA)-Based Polyesters
  46. Strain induced crystallization in biobased Poly(ethylene 2,5-furandicarboxylate) (PEF); conditions for appearance and microstructure analysis
  47. Insights on Thermal and Fire Hazards of Humins in Support of Their Sustainable Use in Advanced Biorefineries
  48. Chain Structure and Molecular Weight Dependent Mechanics of Poly(ethylene 2,5-furandicarboxylate) Compared to Poly(ethylene terephthalate)
  49. FA Polymerization Disruption by Protic Polar Solvents
  50. The FA Polymerization Disruption by Protic Polar Solvent
  51. Humins valorization: From well-defined properties to potential applications
  52. Tailored design of renewable copolymers based on poly(1,4-butylene 2,5-furandicarboxylate) and poly(ethylene glycol) with refined thermal properties
  53. Monitoring Grease Production by Reaction Calorimetry and Thermoanalytical Methods as an Alternative to Dropping Point Determination
  54. Crystallization of Poly(butylene succinate) on Rapid Cooling and Heating: Toward Enhanced Nucleation by Graphene Nanosheets
  55. Impact of Silica Nanoclusters on Furfuryl Alcohol Polymerization and Molecular Mobility
  56. Fast Crystallization and Melting Behavior of a Long-Spaced Aliphatic Furandicarboxylate Biobased Polyester, Poly(dodecylene 2,5-furanoate)
  57. Nucleation and Self‐Nucleation of Bio‐Based Poly(ethylene 2,5‐furandicarboxylate) Probed by Fast Scanning Calorimetry
  58. Isoconversional Kinetics by Fast Scanning Calorimetry
  59. Glass transition dynamics and cooperativity length of poly(ethylene 2,5-furandicarboxylate) compared to poly(ethylene terephthalate)
  60. Morphology and thermal properties of novel clay-based poly(ethylene 2,5-furandicarboxylate) (PEF) nanocomposites
  61. Star-epoxy mesogen with 1,3,5-triazine core: a model of A4B3fractal polymerization in a liquid crystalline thermoset media
  62. Inside Cover: Copolymerization as a Strategy to Combine Epoxidized Linseed Oil and Furfuryl Alcohol: The Design of a Fully Bio‐Based Thermoset (ChemSusChem 24/2015)
  63. Copolymerization as a Strategy to Combine Epoxidized Linseed Oil and Furfuryl Alcohol: The Design of a Fully Bio‐Based Thermoset
  64. Deconvolution of calorimeter response from electrical signals for extracting kinetic data
  65. Partial periodate oxidation and thermal cross-linking for the processing of thermoset all-cellulose composites
  66. Thermomechanical behavior of a novel biobased poly(furfurylalcohol)/silica nanocomposite elaborated by smart functionalization of silica nanoparticles
  67. On the bio-based furanic polyesters: Synthesis and thermal behavior study of poly(octylene furanoate) using fast and temperature modulated scanning calorimetry
  68. Anisotropic reinforcement of epoxy-based nanocomposites with aligned magnetite–sepiolite hybrid nanofiller
  69. From Epoxidized Linseed Oil to Bioresin: An Overall Approach of Epoxy/Anhydride Cross‐Linking
  70. Isothermal Crystallization Kinetics of Poly (Ethylene 2,5‐Furandicarboxylate)
  71. Synthesis, properties and thermal behavior of poly(decylene-2,5-furanoate): a biobased polyester from 2,5-furan dicarboxylic acid
  72. Non‐isothermal Crystallization Kinetics of Biobased Poly(ethylene 2,5‐furandicarboxylate) Synthesized via the Direct Esterification Process
  73. ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations
  74. Valorization of Biorefinery Side-Stream Products: Combination of Humins with Polyfurfuryl Alcohol for Composite Elaboration
  75. Melt and glass crystallization of PDMS and PDMS silica nanocomposites
  76. Thermal stability and kinetic study of poly(ethyl methacrylate-co-acrylonitrile) nanocomposites prepared by in situ polymerization in presence of an Algerian bentonite
  77. Crystallization Behaviour of Polytetrafluoroethylene over very Large Cooling Rate Domains
  78. Elaboration and Characterization of a Novel Biobased Poly(Furfurylalcohol)/Silica Nanocomposite
  79. Determination of pre-exponential factors and of the mathematical functions f(α) or G(α) that describe the reaction mechanism in a model-free way
  80. Nonisothermal Crystallization of Polytetrafluoroethylene in a Wide Range of Cooling Rates
  81. Elaboration and thermal behavior of nanocomposites based on poly(ethyl methacrylate) and an Algerian bentonite prepared via in situ polymerization initiated by Ni(II)α-benzoinoxime complex
  82. Complex Kinetic Pathway of Furfuryl Alcohol Polymerization Catalyzed by Green Montmorillonite Clays
  83. Effects of Incorporation of Organically Modified Montmorillonite on the Reaction Mechanism of Epoxy/Amine Cure
  84. Gelation on Heating of Supercooled Gelatin Solutions
  85. Atypical gelation in gelatin solutions probed by ultra-fast calorimetry
  86. Epoxy–Amine Based Nanocomposites Reinforced by Silica Nanoparticles. Relationships between Morphologic Aspects, Cure Kinetics, and Thermal Properties
  87. Green material composites from renewable resources: Polymorphic transitions and phase diagram of beeswax/rosin resin
  88. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data
  89. Indigo–sepiolite nanohybrids: Temperature-dependent synthesis of two complexes and comparison with indigo–palygorskite systems
  90. Synthesis and thermal behavior of poly(methyl methacrylate)/Maghnia bentonite nanocomposite prepared at room temperature via in situ polymerization initiated by a new Ni(II)α‐benzoinoxime complex
  91. Hybrid Nanocomposites: Advanced Nonlinear Method for Calculating Key Kinetic Parameters of Complex Cure Kinetics
  92. Eco-friendly composite resins based on renewable biomass resources: Polyfurfuryl alcohol/lignin thermosets
  93. Innovative green nanocomposites based on silicate clays/lignin/natural fibres
  94. New insights on the thermal degradation pathways of neat poly(furfuryl alcohol) and poly(furfuryl alcohol)/SiO2 hybrid materials
  95. Integral, differential and advanced isoconversional methods
  96. Miscibility and phase behaviour of binary and ternary homoblends of poly(styrene-co-acrylic acid), poly(styrene-co-N,N-dimethylacrylamide) and poly(styrene-co-4-vinylpyridine)
  97. Molecular mobility and relaxation process of isolated lignin studied by multifrequency calorimetric experiments
  98. Thermal Denaturation of Collagen Analyzed by Isoconversional Method
  99. Macromol. Biosci. 11/2007
  100. Liquid crystalline and isotropic epoxy thermosets: Mechanism and kinetics of non-isothermal degradation
  101. Is the Friedman Method Applicable to Transformations with Temperature Dependent Reaction Heat?
  102. Chemorheological analysis and model-free kinetics of acid catalysed furfuryl alcohol polymerization
  103. Front Cover: Macromol. Rapid Commun. 18/2006
  104. Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers
  105. Isoconversional kinetic analysis of stoichiometric and off-stoichiometric epoxy-amine cures
  106. Variation in Activation Energy of the Glass Transition for Polymers of Different Dynamic Fragility
  107. FT‐IR Spectroscopy and Hydrogen Bonding Interactions in Poly(styrene‐co‐methacrylic acid)/Poly(styrene‐co‐4‐vinyl pyridine) Blends
  108. Hoffman-Lauritzen parameters for non-isothermal crystallization of poly(ethylene terephthalate) and poly(ethylene oxide) melts
  109. DRC signal treatment for heat flow and reagents accumulation determination
  110. Isoconversional kinetic study of alachlor and metolachlor vaporization by thermal analysis
  111. Variation of the Effective Activation Energy Throughout the Glass Transition
  112. Curing kinetics and chemorheological analysis of polyurethane formation
  113. Isoconversional Approach to Evaluating the Hoffman–Lauritzen Parameters (U* and Kg) from the Overall Rates of Nonisothermal Crystallization
  114. Kinetics of Epoxy–Amine Curing Accompanied by the Formation of Liquid Crystalline Structure
  115. A Study of Epoxy‐Amine Cure Kinetics by Combining Isoconversional Analysis with Temperature Modulated DSC and Dynamic Rheometry
  116. Estimating the activation energy for non-isothermal crystallization of polymer melts
  117. Isoconversional Analysis of Calorimetric Data on Nonisothermal Crystallization of a Polymer Melt
  118. Learning about epoxy cure mechanisms from isoconversional analysis of DSC data
  119. Use of Differential Scanning Calorimetry (DSC) as a New Technique for Detection of Adulteration in Honeys. 1. Study of Adulteration Effect on Honey Thermal Behavior
  120. In Vitro Cationic Lipid-Mediated Gene Delivery with Fluorinated Glycerophosphoethanolamine Helper Lipids
  121. Comparison of several computational procedures for evaluating the kinetics of thermally stimulated condensed phase reactions
  122. Electronic solution to the problem of a kinetic standard for DSC measurements
  123. Confidence intervals for the activation energy estimated by few experiments
  124. Simulations for evaluation of kinetic methods in differential scanning calorimetry. Part 2. Effect of additional noise on single-peak methods
  125. Simulations for evaluation of kinetic methods in differential scanning calorimetry. Part 1. Application to single-peak methods: Freeman-Carroll, Ellerstein, Achar-Brindley-Sharp and multiple linear regression methods
  126. The M�lek method in the kinetic study of polymerization by differential scanning calorimetry
  127. Indices for the evaluation of neural network performance as classifier: Application to structural elucidation in infrared spectroscopy
  128. Kinetic study of solid-plastic transitions
  129. Kinetic study of solid-plastic transitions
  130. Different kinetic equations analysis
  131. Solid-plastic transitions kinetics by DSC