All Stories

  1. Influence of SMAT Parameters on Microstructural and Mechanical Properties of Al-Mg-Si Alloy AA 6061

    Article • Journal of Materials Engineering and Performance, March 2017, Springer Science + Business Media

    Dr Sankara Narayanan TSN

  2. Characteristics of microarc oxidation coatings deposited on magnesium using alkaline and acidic electrolytes in a single stage as well as using dual electrolytes in two stages

    Article • Journal of Alloys and Compounds, December 2016, Elsevier

    Dr Sankara Narayanan TSN

  3. Crystalline selenite substituted carbonated hydroxyapatite nanorods: Synthesis, characterization, evaluation of bioactivity and cytotoxicity

    Article • International Journal of Applied Ceramic Technology, November 2016, Wiley

    Dr Sankara Narayanan TSN

  4. Nanoscale modification of magnesium with highly textural lamellar nanosheets towards increasing the corrosion resistance and bioactivity

    Article • Surface and Coatings Technology, October 2016, Elsevier

    Dr Sankara Narayanan TSN

  5. Incorporation of ZrO 2 particles in the oxide layer formed on Mg by anodizing: Influence of electrolyte concentration and current modes

    Article • Journal of Colloid and Interface Science, February 2016, Elsevier

    Dr Sankara Narayanan TSN

  6. A simple strategy to modify the porous structure of plasma electrolytic oxidation coatings on magnesium

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr Sankara Narayanan TSN

  7. Surface medication of Ti–15Mo alloy by thermal oxidation: Evaluation of surface characteristics and corrosion resistance in Ringer's solution

    Article • Applied Surface Science, November 2015, Elsevier

    Dr Sankara Narayanan TSN

  8. Electroless Nanocomposite Coatings: Synthesis, Characteristics, and Applications

    Article • September 2015, Springer Science + Business Media

    Dr Sankara Narayanan TSN

  9. Failure Analysis of a Low-Pressure Turbine Blade in a Coal-Based Thermal Power Plant

    Article • Journal of Failure Analysis and Prevention, September 2015, Springer Science + Business Media

    Dr Sankara Narayanan TSN

  10. Surface Nanocrystallization of EN8 Steel: Correlation of Change in Material Characteristics with Corrosion Behavior

    Article • Journal of The Electrochemical Society, March 2015, The Electrochemical Society

    Dr Sankara Narayanan TSN

  11. A facile electrochemical approach for the deposition of iron–manganese phosphate composite coatings on aluminium

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr Sankara Narayanan TSN

  12. Electroless Nanocomposite Coatings: Synthesis, Characteristics, and Applications

    Article • January 2015, Springer Science + Business Media

    Dr Sankara Narayanan TSN

  13. Strategies to improve the corrosion resistance of microarc oxidation coatings on magnesium and its alloys

    Article • January 2015, Elsevier

    Dr Sankara Narayanan TSN

  14. Surface modification of magnesium and its alloys for biomedical applications

    Article • January 2015, Elsevier

    Dr Sankara Narayanan TSN

  15. List of contributors

    Article • January 2015, Elsevier

    Dr Sankara Narayanan TSN

  16. Improving the Reactivity and Receptivity of Alloy and Tool Steels for Phosphate Conversion Coatings: Role of Surface Mechanical Attrition Treatment

    Article • Industrial & Engineering Chemistry Research, December 2014, American Chemical Society (ACS)

    Dr Sankara Narayanan TSN

  17. Spectrophotometric analysis to monitor the corrosion behaviour of magnesium during immersion corrosion testing: A suitable alternative to pH measurement?

    Article • Corrosion Science, December 2014, Elsevier

    Dr Sankara Narayanan TSN

  18. Deposition of zinc–zinc phosphate composite coatings on aluminium by cathodic electrochemical treatment

    Article • Surface and Coatings Technology, November 2014, Elsevier

    Dr Sankara Narayanan TSN

  19. Development of permanganate assisted manganese phosphate coating on mild steel

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, April 2014, Taylor & Francis

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  20. Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges

    Article • Progress in Materials Science, March 2014, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  21. Tailoring the composition of fluoride conversion coatings to achieve better corrosion protection of magnesium for biomedical applications

    Article • Journal of Materials Chemistry B, January 2014, Royal Society of Chemistry

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  22. Effect of surface mechanical attrition treatment (SMAT) on zinc phosphating of steel

    Article • Transactions of the IMF, December 2013, Taylor & Francis

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  23. Pack boronizing of AISI H11 tool steel: Role of surface mechanical attrition treatment

    Article • Vacuum, November 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  24. Plasma nitriding of AISI 304 stainless steel: Role of surface mechanical attrition treatment

    Article • Materials Characterization, November 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  25. Characterization and corrosion resistance of pure Mg modified by micro‐arc oxidation using phosphate electrolyte with/without NaOH

    Article • Surface and Interface Analysis, October 2013, Wiley

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  26. Deposition of zinc–zinc phosphate composite coatings on steel by cathodic electrochemical treatment

    Article • Journal of Coatings Technology and Research, October 2013, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  27. Effect of surface mechanical attrition treatment (SMAT) on pack boronizing of AISI 304 stainless steel

    Article • Surface and Coatings Technology, October 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  28. Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel

    Article • Corrosion Science, September 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  29. Influence of Surface Mechanical Attrition Treatment Duration on Fatigue Lives of Ti–6Al–4V

    Article • Transactions of the Indian Institute of Metals, August 2013, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  30. Prediction of fretting wear behavior of surface mechanical attrition treated Ti–6Al–4V using artificial neural network

    Article • Materials & Design (1980-2015), August 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  31. Effect of surface mechanical attrition treatment of titanium using alumina balls: surface roughness, contact angle and apatite forming ability

    Article • Frontiers of Materials Science, June 2013, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  32. Thermal oxidation of titanium: Evaluation of corrosion resistance as a function of cooling rate

    Article • Materials Chemistry and Physics, March 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  33. Electro- and Electroless Composite Coatings

    Article • January 2013, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  34. Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti–6Al–4V

    Article • Tribology International, January 2013, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  35. Failure investigation of a boiler bank tube from a 77×2MW coal based thermal power plant in the northwest region of India

    Article • Engineering Failure Analysis, December 2012, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  36. Effect of surface mechanical attrition treatment (SMAT) on boronizing of EN8 steel

    Article • Surface and Coatings Technology, December 2012, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  37. Electroless Ni-B-Si3N4 Composite Coating: Deposition and Evaluation of Its Characteristic Properties

    Article • Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry, August 2012, Taylor & Francis

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  38. Effect of Surface Mechanical Attrition Treatment on Fatigue Lives of Alloy 718

    Article • Transactions of the Indian Institute of Metals, July 2012, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  39. Electro‐ and Electroless Deposited Composite Coatings: Preparation, Characteristics, and Applications

    Article • July 2012, Wiley

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  40. Effect of thermal oxidation on the corrosion resistance of Ti6Al4V alloy in hydrochloric and nitric acid medium

    Article • Werkstoffe und Korrosion, July 2012, Wiley

    Dr Sankara Narayanan TSN

  41. Localized corrosion of an ultrafine grained Al–4Zn–2Mg alloy produced by cryorolling

    Article • Corrosion Science, July 2012, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  42. Fretting wear behaviour of surface mechanical attrition treated alloy 718

    Article • Surface and Coatings Technology, June 2012, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  43. Electrophoretic deposition of nanocomposite (HAp + TiO2) on titanium alloy for biomedical applications

    Article • Ceramics International, May 2012, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  44. Influence of Surface Mechanical Attrition Treatment on Fretting Wear Behaviour of Ti-6Al-4V

    Article • Advanced Materials Research, February 2012, Trans Tech Publications

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  45. Nanocoatings to improve the tribocorrosion performance of materials

    Article • January 2012, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  46. Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications

    Article • Journal of Coatings Technology and Research, December 2011, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  47. Comparison of fretting corrosion behaviour of Ti–6Al–4V alloy and CP-Ti in Ringer’s solution

    Article • Tribology - Materials Surfaces & Interfaces, December 2011, SAGE Publications

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  48. Corrosion resistant Ti alloy for sulphuric acid medium: Suitability of Ti–Mo alloys

    Article • Werkstoffe und Korrosion, October 2011, Wiley

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  49. Electrochemical Behaviour of Surface Modified AISI 304 Grade Stainless Steel in Ringer’s Solution

    Article • Transactions of the Indian Institute of Metals, October 2011, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  50. Polarization and impedance studies on zinc phosphate coating developed using galvanic coupling

    Article • Journal of Coatings Technology and Research, June 2011, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  51. Effect of Thermal Oxidation on Corrosion Resistance of Commercially Pure Titanium in Acid Medium

    Article • Journal of Materials Engineering and Performance, May 2011, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  52. Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer’s solution – Long term evaluation by EIS

    Article • Corrosion Science, February 2011, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  53. Fretting corrosion behaviour of Ti–6Al–4V alloy in artificial saliva containing varying concentrations of fluoride ions

    Article • Wear, January 2011, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  54. Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel

    Article • Corrosion Science, November 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  55. Evaluation of corrosion behaviour of Ti–25Mo alloy in chloride medium

    Article • Journal of Applied Electrochemistry, September 2010, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  56. Evaluation of fretting corrosion behaviour of CP-Ti for orthopaedic implant applications

    Article • Tribology International, July 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  57. Surface modification of CP-Ti to improve the fretting-corrosion resistance: Thermal oxidation vs. anodizing

    Article • Materials Science and Engineering C, July 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  58. Thermal oxidation of CP Ti — An electrochemical and structural characterization

    Article • Materials Characterization, June 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  59. Influence of fluoride ion on the electrochemical behaviour of β-Ti alloy for dental implant application

    Article • Corrosion Science, May 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  60. Fretting-corrosion mapping of CP-Ti in Ringer's solution

    Article • Wear, May 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  61. Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer’s solution

    Article • Corrosion Science, March 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  62. Synthesis of manganese zinc ferrite using ferrous pickle liquor and pyrolusite ore

    Article • Environmental Chemistry Letters, January 2010, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  63. Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization

    Article • Materials Chemistry and Physics, January 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  64. Corrigendum to “Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time” [Mater. Sci. Eng., 29 (2009) 1942–1949]

    Article • Materials Science and Engineering C, January 2010, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  65. RECENT ADVANCES IN SURFACE TREATMENT AND ELECTRODEPOSITION

    Article • Corrosion Reviews, December 2009, De Gruyter

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  66. Thermal oxidation of CP-Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time

    Article • Materials Science and Engineering C, August 2009, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  67. Corrosion resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings

    Article • Journal of Alloys and Compounds, July 2009, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  68. Corrosion resistance of electroless Ni–low B coatings

    Article • Transactions of the IMF, July 2009, Taylor & Francis

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  69. Formation and characteristics of zinc phosphate coatings obtained by electrochemical treatment: Cathodic vs. anodic

    Article • Progress in Organic Coatings, June 2009, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  70. Electrochemical characterization of β-Ti alloy in Ringer's solution for implant application

    Article • Journal of Alloys and Compounds, June 2009, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  71. Wear resistance of electrodeposited Ni–B and Ni–B–Si3N4 composite coatings

    Article • Journal of Materials Science, January 2009, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  72. Electrodeposited Ni–B–Si3N4 composite coating: Preparation and evaluation of its characteristic properties

    Article • Journal of Alloys and Compounds, October 2008, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  73. Fretting corrosion of lubricated tin‐plated contacts

    Article • Industrial Lubrication and Tribology, August 2008, Emerald

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  74. EVALUATION OF THE PERFORMANCE OF ELECTROLESS Ni–B COATED BRASS CONTACTS UNDER FRETTING CONDITIONS

    Article • Surface Review and Letters, August 2008, World Scientific Pub Co Pte Lt

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  75. Fretting corrosion of tin-plated contacts

    Article • Tribology International, July 2008, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  76. Corrosion behaviour of Ti–15Mo alloy for dental implant applications

    Article • Journal of Dentistry, July 2008, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  77. Fretting corrosion of lubricated tin plated copper alloy contacts: Effect of temperature

    Article • Tribology International, February 2008, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  78. Effect of lead content on the dezincification behaviour of leaded brass in neutral and acidified 3.5% NaCl solution

    Article • Materials Chemistry and Physics, November 2007, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  79. Fretting corrosion of tin-plated contacts: Evaluation of surface characteristics

    Article • Tribology International, March 2007, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  80. Effect of temperature on the fretting corrosion of tin plated copper alloy contacts

    Article • Wear, February 2007, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  81. Fretting-corrosion mapping of tin-plated copper alloy contacts

    Article • Wear, January 2007, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  82. Effect of fretting amplitude and frequency on the fretting corrosion behaviour of tin plated contacts

    Article • Surface and Coatings Technology, December 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  83. Evaluation of the corrosion resistance of phosphate coatings obtained by anodic electrochemical treatment

    Article • Progress in Organic Coatings, December 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  84. Electrodeposited Ni–B coatings: Formation and evaluation of hardness and wear resistance

    Article • Materials Chemistry and Physics, October 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  85. FRETTING WEAR BEHAVIOR OF TIN PLATED CONTACTS: INFLUENCE ON CONTACT RESISTANCE

    Article • Surface Review and Letters, October 2006, World Scientific Pub Co Pte Lt

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  86. Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni–P deposits

    Article • Materials Chemistry and Physics, September 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  87. Formation of electroless Ni–B coatings using low temperature bath and evaluation of their characteristic properties

    Article • Surface and Coatings Technology, August 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  88. Pulsed electrodeposition of nanocrystalline Cu–Ni alloy films and evaluation of their characteristic properties

    Article • Materials Letters, July 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  89. Formation of zinc phosphate coating by anodic electrochemical treatment

    Article • Surface and Coatings Technology, May 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  90. Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode–graphite versus steel

    Article • Progress in Organic Coatings, April 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  91. Structure and phase transformation behaviour of electroless Ni–P composite coatings

    Article • Materials Research Bulletin, April 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  92. Formation of zinc–zinc phosphate composite coatings by cathodic electrochemical treatment

    Article • Surface and Coatings Technology, March 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  93. Deposition of electroless Ni–P graded coatings and evaluation of their corrosion resistance

    Article • Surface and Coatings Technology, March 2006, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  94. Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests

    Article • Electrochimica Acta, October 2005, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  95. Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance

    Article • Surface and Coatings Technology, January 2005, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  96. CORROSION OF BRASS IN COOLING WATER SYSTEMS - ROLE OF MANNICH BASE DERIVATIVES

    Article • Corrosion Reviews, February 2004, De Gruyter

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  97. Formation and characterization of borohydride reduced electroless nickel deposits

    Article • Journal of Alloys and Compounds, February 2004, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  98. Electroless Ni–Co–B ternary alloy deposits: preparation and characteristics

    Article • Surface and Coatings Technology, February 2004, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  99. Electroless Ni–Co–P ternary alloy deposits: preparation and characteristics

    Article • Surface and Coatings Technology, July 2003, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  100. Thermal properties of siliconized epoxy interpenetrating coatings

    Article • Progress in Organic Coatings, December 2002, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN, Dr Ananda Kumar Srinivasan

  101. EFFECTIVE SCREENING OF SCALING INHIBITORS FOR COOLING WATER SYSTEMS - DEVELOPMENT OF AN ACCELERATED ELECTROCHEMICAL METHOD

    Article • Corrosion Reviews, February 2002, De Gruyter

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  102. Influence of benzyl alcohols on the electrodeposition of cadmium

    Article • Metal Finishing, September 2001, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  103. Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy

    Article • Journal of Solid State Electrochemistry, April 2001, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  104. Mannich Base Derivatives - A Novel Class of Corrosion Inhibitors for Cooling Water Systems

    Article • Corrosion Reviews, January 2001, De Gruyter

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  105. Studies on Acceleration of the Low Temperature Zinc Phosphating Processes

    Article • Transactions of the IMF, January 2001, Taylor & Francis

    Dr Sankara Narayanan TSN

  106. Acceleration of the phosphating process—the utility of galvanic coupling

    Article • Metal Finishing, September 2000, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  107. Influence of quaternary ammonium ions the electrodeposition of cadmium

    Article • Metal Finishing, June 1999, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  108. Phosphate conversion coatings—Their utility in laser surface hardening

    Article • Metal Finishing, November 1996, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  109. Performance evaluation of phosphating formulations in continuous operation

    Article • Metal Finishing, September 1996, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  110. Acoustic emission testing

    Article • Pigment & Resin Technology, April 1995, Emerald

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  111. Overheating—Its decisive role in phosphating

    Article • Metal Finishing, January 1995, Elsevier

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  112. Predicting the susceptibility of stainless steel materials to localized attack ? a new approach

    Article • Journal of Materials Science Letters, January 1995, Springer Science + Business Media

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  113. Phosphate Conversion Coatings - A Metal Pretreatment Process

    Article • Corrosion Reviews, January 1994, De Gruyter

    Sankara Narayanan TSN, Dr Sankara Narayanan TSN

  114. Studies on the Influence of Hexadecylamine on Chromate Phosphate Coating on Aluminium

    Article • Transactions of the IMF, January 1993, Taylor & Francis

    Dr Sankara Narayanan TSN

  115. Effect of Surfactants on the Growth and Crystal Habit of Zinc Phosphate Coating

    Article • Transactions of the IMF, January 1993, Taylor & Francis

    Dr Sankara Narayanan TSN

  116. Sodium Diethyl Dithiocarbamate—an effective complexone for Cold Zinc Phosphating

    Article • Transactions of the IMF, January 1992, Taylor & Francis

    Dr Sankara Narayanan TSN