All Stories

  1. Correction: Pineda-Domínguez et al. Remineralizing Effect of Three Fluorinated Varnishes on Dental Enamel Analyzed by Raman Spectroscopy, Roughness, and Hardness Surface. Coatings 2025, 15, 1091

    Article • Coatings, December 2025, MDPI AG

    Dr Sandra E Rodil

  2. Differential cytotoxic effects of metal-based nanoparticles on human cells and nosocomial bacteria

    Article • Journal of Nanoparticle Research, December 2025, Springer Science + Business Media

    Dr Sandra E Rodil

  3. Versatile and competitive ZnS-based films on Zn foils with enhanced capacitance for hydrogen evolution

    Article • International Journal of Hydrogen Energy, October 2025, Elsevier

    Dr Sandra E Rodil

  4. Efectividad antibacteriana de un nanorecubrimiento de plata-cobre para mejorar los equipos de protección personal utilizados en las áreas médica y odontológica

    Article • Revista Odontológica Mexicana Órgano Oficial de la Facultad de Odontología UNAM, September 2025, Universidad Nacional Autonoma de Mexico

    Dr Sandra E Rodil

  5. Remineralizing Effect of Three Fluorinated Varnishes on Dental Enamel Analyzed by Raman Spectroscopy, Roughness, and Hardness Surface

    Article • Coatings, September 2025, MDPI AG

    Dr Sandra E Rodil

  6. Zinc Phosphate Microparticles against Nosocomial and Oral Bacteria: Synthesis, Analytical Characterization, and Biocompatibility

    Article • ACS Omega, June 2025, American Chemical Society (ACS)

    Dr Sandra E Rodil

  7. Fluoride Casein Phosphopeptide and Tri-Calcium Phosphate Treatments for Enamel Remineralization: Effects on Surface Properties and Biofilm Resistance

    Article • Dentistry Journal, May 2025, MDPI AG

    Dr Sandra E Rodil

  8. Unraveling the trade-off: Enhanced photocatalytic H2 production vs. degradation in ZnS hybrids under prolonged UV-sonication

    Article • International Journal of Hydrogen Energy, May 2025, Elsevier

    Dr Sandra E Rodil

  9. Assessing the impact of CAP-p15 functionalization on the bioactivity of rough TiO2-coated 316L stainless steel surfaces

    Article • Biomaterials Science, January 2025, Royal Society of Chemistry

    Dr Sandra E Rodil

  10. Blue-light hydrogen production via CdS/g-C3N4 heterojunctions

    Article • Dalton Transactions, January 2025, Royal Society of Chemistry

    Dr Sandra E Rodil

  11. ZnO nanolayer on polypropylene fabrics: a highly effective antimicrobial coating against pathogenic bioaerosols

    Article • Materials Research Express, September 2024, Institute of Physics Publishing

    Dr Sandra E Rodil

  12. Amorphous TiO2 nano-coating on stainless steel to improve its biological response

    Article • Biomedical Materials, August 2024, Institute of Physics Publishing

    Dr Sandra E Rodil

  13. Amorphous titanium oxide (aTiO2) thin films biofunctionalized with CAP-p15 induce mineralized-like differentiation of human oral mucosal stem cells (hOMSCs)

    Article • Biomedical Materials, July 2024, Institute of Physics Publishing

    Dr Sandra E Rodil

  14. Exploring the relationship between sputter-deposition conditions and electrochemical response of ZrO2 films on biodegradable MgZnCa alloy

    Article • Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, January 2024, American Vacuum Society

    Dr Sandra E Rodil

  15. Strong thickness dependence in thin film photocatalytic heterojunctions: the ZnO–Bi2O3 case study

    Article • Dalton Transactions, January 2024, Royal Society of Chemistry

    Professor JUAN CARLOS ALONSO, Dr Sandra E Rodil

  16. Antimicrobial activity of silver-copper coating against aerosols containing surrogate respiratory viruses and bacteria

    Article • PLOS One, December 2023, PLOS

    Dr Sandra E Rodil

  17. Titanato de bismuto para la fotodegradación de tetraciclina

    Article • August 2023, Universidad Nacional Autonoma de Mexico

    Dr Sandra E Rodil

  18. Tribological Response of δ-Bi2O3 Coatings Deposited by RF Magnetron Sputtering

    Article • Lubricants, May 2023, MDPI AG

    Dr Sandra E Rodil

  19. ZnO nanoparticles-modified polycaprolactone-gelatin membranes for guided/bone tissue regeneration, antibacterial and osteogenic differentiation properties

    Article • Biomedical Physics & Engineering Express, March 2023, Institute of Physics Publishing

    Dr Sandra E Rodil

  20. Dihydrolevoglucosenone (Cyrene™), a new possibility of an environmentally compatible solvent in synthetic organic electrochemistry

    Article • Faraday Discussions, January 2023, Royal Society of Chemistry

    Dr Sandra E Rodil

  21. Carbono amorfo y cuasidiamante

    Article • December 2022, Universidad Nacional Autonoma de Mexico

    Dr Sandra E Rodil

  22. Evaluation of the Biocompatibility and Osteogenic Properties of Metal Oxide Coatings Applied by Magnetron Sputtering as Potential Biofunctional Surface Modifications for Orthopedic Implants

    Article • Materials, July 2022, MDPI AG

    Dr Sandra E Rodil

  23. Degradation Behavior and Mechanical Integrity of a Mg-0.7Zn-0.6Ca (wt.%) Alloy: Effect of Grain Sizes and Crystallographic Texture

    Article • Materials, April 2022, MDPI AG

    Dr Sandra E Rodil

  24. Synergistic photocatalytic effect of BiOBr–BiOI heterojunctions due to appropriate layer stacking

    Article • Dalton Transactions, January 2022, Royal Society of Chemistry

    Dr Sandra E Rodil

  25. Cathodic Arc Evaporation of Self-Lubricating TiSiVN Coatings

    Article • Journal of Materials Engineering and Performance, October 2021, Springer Science + Business Media

    Dr Sandra E Rodil

  26. Bismuth subsalicylate incorporated in polycaprolactone-gelatin membranes by electrospinning to prevent bacterial colonization

    Article • Biomedical Materials, June 2021, Institute of Physics Publishing

    Dr Sandra E Rodil

  27. Improving the corrosion resistance of aluminum alloy (AA7075) using amorphous chromium oxide coatings

    Article • Materials Letters, November 2020, Elsevier

    Dr Sandra E Rodil

  28. Structural stabilization and ionic conductivity of bismuth niobium oxide films with fluorite-like structure

    Article • Materials Letters, May 2020, Elsevier

    Dr Sandra E Rodil

  29. Synthesis of a CeO2/Co3O4 catalyst with a remarkable performance for the soot oxidation reaction

    Article • Catalysis Science & Technology, January 2020, Royal Society of Chemistry

    Dr Sandra E Rodil, Dr Rodolfo Zanella

  30. Structure, mechanical properties and corrosion resistance of amorphous Ti-Cr-O coatings

    Article • Surface and Coatings Technology, June 2019, Elsevier

    Dr Sandra E Rodil

  31. Synthesis of Bi2SiO5 thin films by confocal dual magnetron sputtering-annealing route

    Article • Thin Solid Films, April 2019, Elsevier

    Dr Sandra E Rodil

  32. Good practices for reporting the photocatalytic evaluation of a visible-light active semiconductor: Bi2O3, a case study

    Article • Catalysis Science & Technology, January 2019, Royal Society of Chemistry

    Dr Sandra E Rodil

  33. Evaluation of the Photocatalytic Activity of Copper Doped TiO2 nanoparticles for the Purification and/or Disinfection of Industrial Effluents

    Article • Catalysis Today, November 2018, Elsevier

    Dr Sandra E Rodil

  34. Dependence of the photoactivity of CdS prepared in Butanol-Ethylenediamine mixture in function of different Sacrificial Electron Donors

    Article • Catalysis Today, October 2018, Elsevier

    Dr Sandra E Rodil

  35. Stabilized β-Bi2O3 nanoparticles from (BiO)4CO3(OH)2 precursor and their photocatalytic properties under Blue Light

    Article • Ceramics International, September 2018, Elsevier

    Dr Rodolfo Zanella, Dr Sandra E Rodil

  36. Effect of the addition of Si into V 2 O 5 coatings: Structure and tribo-mechanical properties

    Article • Surface and Coatings Technology, September 2018, Elsevier

    Dr Sandra E Rodil

  37. Fabrication of Sputtered Ce/La, La/Ce Oxide Bilayers on AA6061 and AA7075 Aluminum Alloys for the Development of Corrosion Protective Coatings

    Article • Materials, June 2018, MDPI AG

    Dr Sandra E Rodil

  38. Synergistic effect of supported ZnO/Bi 2 O 3 heterojunctions for photocatalysis under visible light

    Article • Dyes and Pigments, June 2018, Elsevier

    Dr Sandra E Rodil

  39. The bismuth oxyhalide family: thin film synthesis and periodic properties

    Article • Dalton Transactions, January 2018, Royal Society of Chemistry

    Dr Sandra E Rodil

  40. High stability and ac-conductivity of cubic fluorite-Bi 2 O 3 films synthesized by magnetron sputtering

    Article • Solid State Ionics, October 2017, Elsevier

    Dr Sandra E Rodil

  41. Evaluation of the photodiscoloration efficiency of β-Bi 2 O 3 films deposited on different substrates by pneumatic spray pyrolysis

    Article • Thin Solid Films, September 2017, Elsevier

    Dr Sandra E Rodil

  42. Optical properties of nanocrystalline La 2 O 3 dielectric films deposited by radio frequency magnetron sputtering

    Article • Thin Solid Films, August 2017, Elsevier

    Dr Sandra E Rodil

  43. Preferential orientation in bismuth thin films as a function of growth conditions

    Article • Thin Solid Films, August 2017, Elsevier

    Dr Sandra E Rodil

  44. Synthesis and properties of Bi5Nb3O15 thin films prepared by dual co-sputtering

    Article • Journal of Alloys and Compounds, February 2017, Elsevier

    Dr Sandra E Rodil

  45. Comparison of the biological response between crystalline and amorphous titanium oxide coatings

    Article • Journal of Biomedical Materials Research Part A, October 2016, Wiley

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete

  46. The effect of simulated inflammatory conditions on the surface properties of titanium and stainless steel and their importance as biomaterials

    Article • Materials Science and Engineering C, September 2016, Elsevier

    Dr Sandra E Rodil

  47. Photocatalytic discoloration of methyl orange dye by δ-Bi2O3 thin films

    Article • Thin Solid Films, August 2016, Elsevier

    Dr Sandra E Rodil

  48. Polymer-based composite with outstanding mechanically tunable refractive index

    Article • Optical Materials, August 2016, Elsevier

    Dr Sandra E Rodil

  49. Efficient α/β-Bi2O3 composite for the sequential photodegradation of two-dyes mixture

    Article • Ceramics International, August 2016, Elsevier

    Dr Sandra E Rodil

  50. Photocatalytic activity of enlarged microrods of α-Bi 2 O 3 produced using ethylenediamine-solvent

    Article • Ceramics International, August 2016, Elsevier

    Dr Sandra E Rodil, Dr Rodolfo Zanella

  51. Effect of the addition of Si into Nb2O5 coatings on their structural, optical, and mechanical properties

    Article • Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, July 2016, American Vacuum Society

    Dr Sandra E Rodil

  52. Sputtered bismuth oxide thin films as a potential photocatalytic material

    Article • Catalysis Today, May 2016, Elsevier

    Dr Sandra E Rodil

  53. Effect of the KOH chemical treatment on the optical and photocatalytic properties of BiVO4 thin films

    Article • Applied Physics A, March 2016, Springer Science + Business Media

    Dr Sandra E Rodil, Dr Sitaramanjaneya Mouli Thalluri

  54. Reduction of the coefficient of friction of niobium nitride coatings by the addition of bismuth

    Article • Vacuum, March 2016, Elsevier

    Dr Sandra E Rodil

  55. Effect of Si addition on the structure and corrosion behavior of NbN thin films deposited by unbalanced magnetron sputtering

    Article • Applied Physics A, January 2016, Springer Science + Business Media

    Dr Sandra E Rodil

  56. Biomedical coatings prepared by magnetron sputtering

    Article • Frontiers in Bioengineering and Biotechnology, January 2016, Frontiers

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete

  57. The atomic ordering and its correlation to protein adsorption on biocompatible metal oxide coatings

    Article • Frontiers in Bioengineering and Biotechnology, January 2016, Frontiers

    Dr Sandra E Rodil

  58. Can surface roughness induce osteoblasts differentiation independently of the type of material? Comparison between metals, ceramic and polymers.

    Article • Frontiers in Bioengineering and Biotechnology, January 2016, Frontiers

    Dr Sandra E Rodil

  59. Effects of atomic ordering of zirconium oxide nanomodification on stem cell differentiation and bacterial adhesion

    Article • Frontiers in Bioengineering and Biotechnology, January 2016, Frontiers

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete

  60. Study of surface phenomena on titanium and its oxides due to its treatment with hydrogen peroxide

    Article • Frontiers in Bioengineering and Biotechnology, January 2016, Frontiers

    Dr Sandra E Rodil

  61. Bacterial adhesion on amorphous and crystalline metal oxide coatings

    Article • Materials Science and Engineering C, December 2015, Elsevier

    Dr Sandra E Rodil

  62. Antibacterial effect of bismuth subsalicylate nanoparticles synthesized by laser ablation

    Article • Journal of Nanoparticle Research, November 2015, Springer Science + Business Media

    Dr Sandra E Rodil

  63. Photomechanical response of composites based on PDMS and carbon soot nanoparticles under IR laser irradiation

    Article • Optical Materials Express, July 2015, Optical Society of America (OSA)

    Dr Sandra E Rodil

  64. Role of integrin subunits in mesenchymal stem cell differentiation and osteoblast maturation on graphitic carbon-coated microstructured surfaces

    Article • Biomaterials, May 2015, Elsevier

    Dr Sandra E Rodil, Sharon Hyzy, Dr Rene Olivares-Navarrete

  65. Opto-electronic properties of bismuth oxide films presenting different crystallographic phases

    Article • Thin Solid Films, March 2015, Elsevier

    Dr Sandra E Rodil

  66. Spray deposited β-Bi2O3 nanostructured films with visible photocatalytic activity for solar water treatment

    Article • Photochemical & Photobiological Sciences, January 2015, Springer Science + Business Media

    Dr Monserrat Bizarro, Dr Sandra E Rodil

  67. Chemically induced porosity on BiVO4 films produced by double magnetron sputtering to enhance the photo-electrochemical response

    Article • Physical Chemistry Chemical Physics, January 2015, Royal Society of Chemistry

    Dr Sitaramanjaneya Mouli Thalluri, Dr Simelys Hernandez, Dr Sandra E Rodil

  68. Optimal conditions for the deposition of novel anticorrosive coatings by RF magnetron sputtering for aluminum alloy AA6082

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Dr Sandra E Rodil

  69. Physicochemical Characterization of Photocatalytic Materials

    Article • November 2014, Springer Science + Business Media

    Dr Sandra E Rodil

  70. Structural, chemical, optical and mechanical properties of Au doped AlN sputtered coatings

    Article • Surface and Coatings Technology, September 2014, Elsevier

    Dr Sandra E Rodil

  71. TiO2Sensitization with Bi2S3Quantum Dots: The Inconvenience of Sodium Ions in the Deposition Procedure

    Article • The Journal of Physical Chemistry C, June 2014, American Chemical Society (ACS)

    Dr Sandra E Rodil

  72. Nano sized bismuth oxy chloride by metal organic chemical vapour deposition

    Article • Applied Surface Science, June 2014, Elsevier

    Dr Sandra E Rodil

  73. TaSiN nanocomposite thin films: Correlation between structure, chemical composition, and physical properties

    Article • Thin Solid Films, May 2014, Elsevier

    Dr Sandra E Rodil

  74. Preliminary Tribological Study and Tool Life of Four Commercial Drills

    Article • Tribology Transactions, April 2014, Taylor & Francis

    Dr Sandra E Rodil

  75. Stabilization of the delta-phase in Bi2O3 thin films

    Article • Solid State Ionics, February 2014, Elsevier

    Dr Sandra E Rodil

  76. A comparative study of fibrinogen adsorption onto metal oxide thin films

    Article • Applied Surface Science, October 2013, Elsevier

    Dr Sandra E Rodil

  77. An overview of protein adsorption on metal oxide coatings for biomedical implants

    Article • Surface and Coatings Technology, October 2013, Elsevier

    Dr Sandra E Rodil

  78. Influence of Surface Pre-Treatment On Electrochemical Properties of CeO2 thin Films Deposited by R.F. Sputtering On AA7075 Aluminum Alloy

    Article • ECS Transactions, September 2013, The Electrochemical Society

    Dr Sandra E Rodil

  79. Corrosion resistant coatings for dental implants

    Article • January 2013, Elsevier

    Dr Sandra E Rodil

  80. Electrical and optical properties of Ta-Si-N thin films deposited by reactive magnetron sputtering

    Article • Journal of Applied Physics, December 2012, American Institute of Physics

    Dr Sandra E Rodil

  81. Pulsed laser deposition and characterization of La1−xSrxMnO3

    Article • Materials Science in Semiconductor Processing, October 2012, Elsevier

    Dr Sandra E Rodil

  82. Influence of the ion energy on the structure of Bi and Fe2O3 thin films

    Article • Applied Physics A, September 2012, Springer Science + Business Media

    Dr Sandra E Rodil

  83. Effect of 8MeV Si ions irradiation and thermal annealing in ZnO thin films

    Article • Journal of Crystal Growth, September 2012, Elsevier

    Dr Sandra E Rodil

  84. A Detailed Study of the Synthesis of Bismuth Thin Films by PVD-Methods and their Structural Characterization

    Article • MRS Proceedings, January 2012, Cambridge University Press

    Dr Sandra E Rodil

  85. Sputtered Bismuth thin films as trace metal electrochemical sensors

    Article • MRS Proceedings, January 2012, Cambridge University Press

    Dr Sandra E Rodil

  86. A look into the interaction of metal oxide thin films with biological media: Albumin and Fibrinogen adsorption

    Article • MRS Proceedings, January 2012, Cambridge University Press

    Dr Sandra E Rodil

  87. Albumin adsorption on oxide thin films studied by spectroscopic ellipsometry

    Article • Applied Surface Science, December 2011, Elsevier

    Dr Sandra E Rodil

  88. Biocompatibility of Niobium Coatings

    Article • Coatings, September 2011, MDPI AG

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete

  89. Amorphous Carbon Gold Nanocomposite Thin Films: Structural and Spectro-ellipsometric Analysis

    Article • Thin Solid Films, July 2011, Elsevier

    Dr Sandra E Rodil

  90. Niobium based coatings for dental implants

    Article • Applied Surface Science, January 2011, Elsevier

    Dr Sandra E Rodil

  91. Amorphous niobium oxide thin films

    Article • Journal of Non-Crystalline Solids, November 2010, Elsevier

    Dr Sandra E Rodil

  92. Protein Adsorption on Amorphous Metal Oxide Thin Films: An FTIR/ATR and Ellipsometry study

    Article • MRS Proceedings, January 2010, Cambridge University Press

    Dr Sandra E Rodil

  93. Oral bacterial adhesion on amorphous carbon and titanium films: Effect of surface roughness and culture media

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, January 2010, Wiley

    Dr Sandra E Rodil

  94. XPS and EIS studies of sputtered Al–Ce films formed on AA6061 aluminum alloy in 3.5% NaCl solution

    Article • Journal of Applied Electrochemistry, December 2009, Springer Science + Business Media

    Dr Sandra E Rodil

  95. Deposition of amorphous carbon–silver composites

    Article • Thin Solid Films, December 2009, Elsevier

    Dr Sandra E Rodil

  96. Effective corrosion protection of AA6061 aluminum alloy by sputtered Al–Ce coatings

    Article • Electrochimica Acta, December 2009, Elsevier

    Dr Sandra E Rodil

  97. Structural and electrochemical performance of sputtered Al–Ce films on AA6061 aluminum alloy substrates

    Article • Surface and Coatings Technology, December 2009, Elsevier

    Dr Sandra E Rodil

  98. Corrosion behavior of amorphous carbon deposit in 0.89% NaCl by electrochemical impedance spectroscopy

    Article • Diamond and Related Materials, November 2009, Elsevier

    Dr Sandra E Rodil

  99. Oral bacterial adhesion on amorphous carbon films

    Article • Diamond and Related Materials, September 2009, Elsevier

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete

  100. Synthesis and Characterization of Chromate Conversion Coatings on GALVALUME and Galvanized Steel Substrates

    Article • Metallurgical and Materials Transactions A, June 2009, Springer Science + Business Media

    Dr Sandra E Rodil

  101. Biocompatibility and Anti-microbial Properties of Silver Modified Amorphous Carbon Films

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete

  102. Biocompatibility and bio-corrosion resistance of amorphous oxide thin films

    Article • MRS Proceedings, January 2009, Cambridge University Press

    Dr Sandra E Rodil

  103. The preparation of permalloy 80/20 thin films using a pulsed DC discharge in a hollow cathode

    Article • Vacuum, January 2009, Elsevier

    Dr Sandra E Rodil

  104. Superconducting niobium nitride films deposited by unbalanced magnetron sputtering

    Article • Thin Solid Films, October 2008, Elsevier

    Dr Sandra E Rodil

  105. Comparative study of niobium nitride coatings deposited by unbalanced and balanced magnetron sputtering

    Article • Thin Solid Films, October 2008, Elsevier

    Dr Sandra E Rodil

  106. Comparison and semiconductor properties of nitrogen doped carbon thin films grown by different techniques

    Article • Applied Surface Science, June 2008, Elsevier

    Dr Sandra E Rodil

  107. Evolution of the opto-electronic properties of amorphous carbon films as a function of nitrogen incorporation

    Article • Diamond and Related Materials, June 2008, Elsevier

    Dr Sandra E Rodil

  108. Osteoinduction properties of graphite-like amorphous carbon films evaluated in-vitro

    Article • Diamond and Related Materials, October 2007, Elsevier

    Dr Sandra E Rodil

  109. An alternative procedure for the determination of the optical band gap and thickness of amorphous carbon nitride thin films

    Article • Applied Surface Science, October 2007, Elsevier

    Dr Sandra E Rodil

  110. The influence of the magnetic field configuration on plasma parameters and microstructure of niobium nitride films

    Article • Surface and Coatings Technology, March 2007, Elsevier

    Dr Sandra E Rodil

  111. Influence of the ion–atom flux ratio on the mechanical properties of chromium nitride thin films

    Article • Vacuum, January 2007, Elsevier

    Dr Sandra E Rodil

  112. Status of technology of carbon nitride films: challenges and opportunties

    Article • Surface Engineering, October 2006, Taylor & Francis

    Dr Sandra E Rodil

  113. Osteoblasts attachment on amorphous carbon films

    Article • Diamond and Related Materials, September 2006, Elsevier

    Dr Sandra E Rodil

  114. Unbalanced magnetic field configuration: plasma and film properties

    Article • Journal of Physics Condensed Matter, July 2006, Institute of Physics Publishing

    Dr Sandra E Rodil

  115. Corrosion behaviour of TaN thin PVD films on steels

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, June 2006, Taylor & Francis

    Dr Sandra E Rodil

  116. Influence of the energy parameter on the microstructure of chromium nitride coatings

    Article • Surface and Coatings Technology, May 2006, Elsevier

    Dr Sandra E Rodil

  117. Infrared spectra of amorphous carbon based materials

    Article • Diamond and Related Materials, August 2005, Elsevier

    Dr Sandra E Rodil

  118. Growth and characterisation of polymeric amorphous carbon and carbon nitride films from propane

    Article • Diamond and Related Materials, March 2005, Elsevier

    Dr Sandra E Rodil

  119. Comparative study of chromium nitride coatings deposited by unbalanced and balanced magnetron sputtering

    Article • Thin Solid Films, March 2005, Elsevier

    Dr Sandra E Rodil

  120. Bonding characteristics of DC magnetron sputtered B–C–N thin films investigated by Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy

    Article • Thin Solid Films, November 2004, Elsevier

    Dr Sandra E Rodil

  121. Optical properties of TiO2-x thin films studied by spectroscopic ellipsometry: substrate temperature effect

    Article • October 2004, SPIE

    Dr Sandra E Rodil

  122. Bonding in amorphous carbon nitride

    Article • Diamond and Related Materials, April 2004, Elsevier

    Dr Sandra E Rodil

  123. Deposition of ta-C:N:H as Function of Experimental Parameters

    Article • Surface Engineering, February 2004, Taylor & Francis

    Dr Sandra E Rodil

  124. In vitro studies of the biomineralization in amorphous carbon films

    Article • Surface and Coatings Technology, January 2004, Elsevier

    Dr Sandra E Rodil

  125. Paramagnetic defects in hydrogenated amorphous carbon powders

    Article • Journal of Physics Condensed Matter, October 2003, Institute of Physics Publishing

    Dr Sandra E Rodil

  126. Erratum to “Highest optical gap tetrahedral amorphous carbon”

    Article • Diamond and Related Materials, August 2003, Elsevier

    Dr Sandra E Rodil

  127. Erratum to “Is stress necessary to stabilise sp3 bonding in diamond-like carbon”

    Article • Diamond and Related Materials, August 2003, Elsevier

    Dr Sandra E Rodil

  128. Optical gap in carbon nitride films

    Article • Thin Solid Films, June 2003, Elsevier

    Dr Sandra E Rodil

  129. Studies of pulsed high-current arcs used to prepare carbon films

    Article • Thin Solid Films, June 2003, Elsevier

    Dr Sandra E Rodil

  130. a-C thin film deposition by laser ablation

    Article • Thin Solid Films, June 2003, Elsevier

    Dr Sandra E Rodil

  131. Interpretation of infrared and Raman spectra of amorphous carbon nitrides

    Article • April 2003, American Physical Society (APS)

    Dr Sandra E Rodil

  132. Gas evolution studies for structural characterization of hydrogenated carbon nitride samples

    Article • Diamond and Related Materials, March 2003, Elsevier

    Dr Sandra E Rodil

  133. Properties of carbon films and their biocompatibility using in-vitro tests

    Article • Diamond and Related Materials, March 2003, Elsevier

    Dr Sandra E Rodil

  134. Resonant Raman spectra of amorphous carbon nitrides: the G peak dispersion

    Article • Diamond and Related Materials, March 2003, Elsevier

    Dr Sandra E Rodil

  135. Infrared spectra of carbon nitride films

    Article • Thin Solid Films, December 2002, Elsevier

    Dr Sandra E Rodil

  136. Highest optical gap tetrahedral amorphous carbon

    Article • Diamond and Related Materials, March 2002, Elsevier

    Dr Sandra E Rodil

  137. Is stress necessary to stabilise sp3 bonding in diamond-like carbon?

    Article • Diamond and Related Materials, March 2002, Elsevier

    Dr Sandra E Rodil

  138. Role of sp2 phase in field emission from nanostructured carbons

    Article • Journal of Applied Physics, August 2001, American Institute of Physics

    Dr Sandra E Rodil

  139. Raman and infrared modes of hydrogenated amorphous carbon nitride

    Article • Journal of Applied Physics, May 2001, American Institute of Physics

    Dr Sandra E Rodil

  140. Chemical sputtering of ta-C: Implications for the deposition of carbon nitride

    Article • Journal of Applied Physics, May 2001, American Institute of Physics

    Dr Sandra E Rodil

  141. Effect of graphitic inclusions on the optical gap of tetrahedral amorphous carbon films

    Article • Journal of Applied Physics, April 2001, American Institute of Physics

    Dr Sandra E Rodil

  142. Hydrogen and disorder in diamond-like carbon

    Article • Diamond and Related Materials, March 2001, Elsevier

    Dr Sandra E Rodil

  143. Dual ion plasma-beam sources used to maximise sp3 C–C bonds in carbon nitride

    Article • Diamond and Related Materials, March 2001, Elsevier

    Dr Sandra E Rodil

  144. Density,sp3fraction, and cross-sectional structure of amorphous carbon films determined by x-ray reflectivity and electron energy-loss spectroscopy

    Article • October 2000, American Physical Society (APS)

    Dr Sandra E Rodil

  145. Maximized sp3 bonding in carbon nitride phases

    Article • Applied Physics Letters, September 2000, American Institute of Physics

    Dr Sandra E Rodil

  146. Deposition of carbon nitride films using an electron cyclotron wave resonance plasma source

    Article • Diamond and Related Materials, April 2000, Elsevier

    Dr Sandra E Rodil

  147. Nitrogen Incorporation into Tetrahedral Hydrogenated Amorphous Carbon

    Article • phys stat sol (a), July 1999, Wiley

    Dr Sandra E Rodil

  148. The Preparation, Characterization and Tribological Properties of TA-C:H Deposited Using an Electron Cyclotron Wave Resonance Plasma Beam Source

    Article • phys stat sol (a), March 1999, Wiley

    Dr Sandra E Rodil

  149. Production and characterisation of carbon nitride thin films produced by a graphite hollow cathode system

    Article • Thin Solid Films, October 1997, Elsevier

    Dr Sandra E Rodil

  150. Biocompatibility, Cytotoxicity and Bioactivity of Amorphous Carbon Films

    Article • Springer Science + Business Media

    Dr Sandra E Rodil, Dr Rene Olivares-Navarrete