All Stories

  1. New Trends in Engineering Research

    Article • January 2024, Springer Science + Business Media

    Prof Ruzica R Nikolic

  2. Influence of Window Roller Blinds on Energy Consumption in Residential Buildings in Serbia

    Article • System Safety Human - Technical Facility - Environment, December 2023, De Gruyter

    Prof Ruzica R Nikolic

  3. Prediction of the Crack Front Shape of the Corner Interface Crack

    Article • Applied Sciences, November 2023, MDPI AG

    Prof Ruzica R Nikolic

  4. Comparative Analysis of Hybrid Composites Based on A356 and ZA-27 Alloys regarding Their Tribological Behaviour

    Article • Communications - Scientific letters of the University of Zilina, July 2023, University of Zilina

    Prof. Blaža Stojanović, Prof Ruzica R Nikolic

  5. Influence of TiN Coating on the Drawing Force and Friction Coefficient in the Deep Drawing Process of AlMg4.5Mn0.7 Thin Sheets

    Article • Materials, May 2023, MDPI AG

    Prof Ruzica R Nikolic

  6. Analysis of the Low Service Life of a Planing Knife – A Case Study

    Article • Materials Science, February 2023, Publishing House Technologija

    Prof Ruzica R Nikolic

  7. Prediction of the propagation direction of a crack that attacks the interface at an arbitrary angle

    Article • Procedia Structural Integrity, January 2023, Elsevier

    Prof Ruzica R Nikolic

  8. Resistance of the CrN coating to wear and corrosion

    Article • Transportation Research Procedia, January 2023, Elsevier

    Prof Ruzica R Nikolic

  9. Analysis of Filler Metals Influence on Quality of Hard-Faced Surfaces of Gears Based on Tests in Experimental and Operating Conditions

    Article • Materials, November 2022, MDPI AG

    Prof Ruzica R Nikolic

  10. Friction Properties of the Heat-Treated Electroless Ni Coatings Embedded with c-BN Nanoparticles

    Article • Coatings, July 2022, MDPI AG

    Prof Ruzica R Nikolic

  11. Weldability Assessment of Various Steels by Hard-Facing

    Article • Materials, April 2022, MDPI AG

    Prof Ruzica R Nikolic

  12. Selection of the Optimal Window Type and Orientation for the Two Cities in Serbia and One in Slovakia

    Article • Energies, January 2022, MDPI AG

    Prof Ruzica R Nikolic

  13. Probabilistic approach and fault-tree analysis for increased bucket wheel excavator welded joints reliability

    Article • Procedia Structural Integrity, January 2022, Elsevier

    Prof Ruzica R Nikolic

  14. Fatigue damage initiation mechanisms in bearing steel

    Article • Materials Today Proceedings, January 2022, Elsevier

    Prof Ruzica R Nikolic

  15. Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures

    Article • Materials, July 2021, MDPI AG

    Prof Ruzica R Nikolic

  16. An Example of Reparatory Surface Welding of the Mining Machine Vital Part

    Article • Communications - Scientific letters of the University of Zilina, January 2021, University of Zilina

    Prof Ruzica R Nikolic

  17. Effect of Elevated Temperatures on Mechanical Properties of Ultra High Strength Hot Work Tool Steel H11

    Article • Transactions of FAMENA, June 2020, Faculty of Mechanical Engineering and Naval Architecture, Univ. of Zagreb

    Prof Ruzica R Nikolic

  18. Evaluation of expressions for calculating the cooling time in carbon steels welding

    Article • March 2019, Taylor & Francis

    Prof Ruzica R Nikolic

  19. Influence of the Welding Joint Type on Safety Properties of the Armor Steel Armox 500T

    Article • March 2019, De Gruyter

    Prof Ruzica R Nikolic

  20. Influence of the Welding Joint Type on Safety Properties of the Armor Steel Armox 500t

    Article • System Safety Human - Technical Facility - Environment, March 2019, De Gruyter

    Prof Ruzica R Nikolic

  21. Optimization of Parameters of a Planetary Gearbox Using the Taguchi-Grey Relational Analysis

    Article • Communications - Scientific letters of the University of Zilina, September 2018, University of Zilina

    Prof Ruzica R Nikolic, Prof. Blaža Stojanović

  22. Estimate of the steel bridges fatigue life by application of the fracture mechanics

    Article • IOP Conference Series Materials Science and Engineering, September 2018, Institute of Physics Publishing

    Prof Ruzica R Nikolic

  23. Qualification of the welding technology of the structural steel S355J2G3

    Article • IOP Conference Series Materials Science and Engineering, September 2018, Institute of Physics Publishing

    Prof Ruzica R Nikolic

  24. Review of the Hard-Facing Technology Application for Reparation of the Given Parts in Various Branches of Industry

    Article • Multidisciplinary Aspects of Production Engineering, September 2018, De Gruyter

    Prof Ruzica R Nikolic

  25. Reducing the melting and sublimation of the galvanized sheets zinc layer during the laser beam cutting

    Article • IOP Conference Series Materials Science and Engineering, August 2018, Institute of Physics Publishing

    Prof Ruzica R Nikolic

  26. The Effect of Selected Technological Parameters of Laser Cutting on the Cut Surface Roughness

    Article • Tehnicki vjesnik - Technical Gazette, August 2018, Mechanical Engineering Faculty in Slavonski Brod

    Prof Ruzica R Nikolic

  27. Numerical Investigation of J-Integral on a Notched Pressure Vessel

    Article • Advanced Materials Research, April 2018, Trans Tech Publications

    Srdjan Tadic, Prof Ruzica R Nikolic

  28. Analysis of wear properties of Zn-based composites using the Taguchi method

    Article • Materials Testing, March 2018, Carl Hanser Verlag

    Prof. Blaža Stojanović, Prof Ruzica R Nikolic

  29. Microstructure in the joining zone during the friction welding of the two dissimilar steels

    Article • Industrial Lubrication and Tribology, March 2018, Emerald

    Dušan Arsić, Prof Ruzica R Nikolic

  30. RADIAL FORCE IMPACT ON THE FRICTION COEFFICIENT AND TEMPERATURE OF A SELF-LUBRICATING PLAIN BEARING

    Article • Facta Universitatis Series Mechanical Engineering, December 2017, University of Nis

    Prof Ruzica R Nikolic

  31. Analysis of the Three-Dimensional Zone around the Interfacial Crack Tip: The K-Influence Domain Range in the Plane Stress State

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Prof Ruzica R Nikolic, Snezana Vulovic, Jelena Djokovic, Miroslav Zivkovic

  32. Prediction of the Fatigue Life of the Vibrational Sieve Supporting Beam

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Prof Ruzica R Nikolic, Jelena Djokovic, Jan Bujnak

  33. Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process

    Article • Industrial Lubrication and Tribology, July 2017, Emerald

    Prof Ruzica R Nikolic, Dušan Arsić

  34. Screening Efficiency Analysis of Vibrosieves with the Circular Vibrations

    Article • Civil and Environmental Engineering, January 2017, De Gruyter

    Prof Ruzica R Nikolic

  35. Influence of friction welding parameters on properties of the Al-Cu joint

    Article • FME Transaction, January 2017, Centre for Evaluation in Education and Science (CEON/CEES)

    Prof Ruzica R Nikolic, Dušan Arsić

  36. Influence of Windows Geometrical Parameters on Calculations of the Heat Conduction Coefficient

    Article • Procedia Engineering, January 2017, Elsevier

    Prof Ruzica R Nikolic

  37. Criteria for Prediction the Interfacial Crack Growth in Concrete

    Article • Solid State Phenomena, December 2016, Trans Tech Publications

    Prof Ruzica R Nikolic, Jelena Djokovic, Jan Bujnak

  38. Influence of the Friction Time on the Shape and Microstructure of the Mixing Zone of the Friction Welded Joint

    Article • MANUFACTURING TECHNOLOGY, December 2016, Jan Evangelista Purkyne University in Usti nad Labem

    Prof Ruzica R Nikolic

  39. Revitalization of the damaged machine parts by hard facing as a way of saving funds

    Article • Production Engineering Archives, September 2016, Stowarzyszenie Menedzerow Jakosci i Produkcji

    Dušan Arsić, Prof Ruzica R Nikolic

  40. Energy release rate criterion for a dynamically growing interface crack

    Article • International Journal of Damage Mechanics, July 2016, SAGE Publications

    Prof Ruzica R Nikolic

  41. Corrosion of reinforcement, existing bridge, reliability, moment resistance

    Article • Key Engineering Materials, May 2016, Trans Tech Publications

    Prof Ruzica R Nikolic, Assoc.Prof. Peter Koteš

  42. Reparation by Hard Facing of the Damaged Secondary Stone Crushers

    Article • MANUFACTURING TECHNOLOGY, April 2016, Jan Evangelista Purkyne University in Usti nad Labem

    Prof Ruzica R Nikolic

  43. Geometrical parameters influence on behavior of the sandwich plates with corrugated core

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Prof Ruzica R Nikolic

  44. Behavior of the sandwich beam subjected to bending as a function of the core density

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Prof Ruzica R Nikolic

  45. Evaluation of Elder and Historical Bridges

    Article • Procedia Engineering, January 2016, Elsevier

    Prof Ruzica R Nikolic

  46. Experimental Determination of Residual Stresses in the Hard-faced Layers after Hard-facing and Tempering of Hot Work Steels

    Article • Procedia Engineering, January 2016, Elsevier

    Prof Ruzica R Nikolic, Dušan Arsić

  47. Micro-structure in the Joint Friction Plane in Friction Welding of Dissimilar Steels

    Article • Procedia Engineering, January 2016, Elsevier

    Prof Ruzica R Nikolic, Dušan Arsić

  48. Investigation of the Lubrication Influence on Single-phase and Multi-phase Ironing Processes

    Article • Procedia Engineering, January 2016, Elsevier

    Prof Ruzica R Nikolic, Dušan Arsić

  49. Selection and Analysis of Material for Boiler Pipes in a Steam Plant

    Article • Procedia Engineering, January 2016, Elsevier

    Prof Ruzica R Nikolic, Dušan Arsić

  50. Influence of the Joint Geometry on the Stress Intensity Factor of the Fillet Welded Cruciform Joint Subjected to Tension and Bending

    Article • Materials Today Proceedings, January 2016, Elsevier

    Prof Ruzica R Nikolic

  51. Experimental Determination of Mechanical Characteristics of Four Types of Stones and their Influence on the Construction Machinery Parts Wear

    Article • Advanced Materials Research, April 2015, Trans Tech Publications

    Prof Ruzica R Nikolic, Dušan Arsić

  52. Reparation of damaged forging dies by hard facing (HF) technology

    Article • Production Engineering Archives, March 2015, Stowarzyszenie Menedzerow Jakosci i Produkcji

    Dušan Arsić, Prof Ruzica R Nikolic

  53. Impact of the Weld Geometry on the Stress Intensity Factor of the Welded T-Joint Exposed to the Tensile Force and the Bending Moment

    Article • Civil and Environmental Engineering, January 2015, De Gruyter

    Prof Ruzica R Nikolic, Jelena Djokovic

  54. Influence of Tempering on the Deformation Level of the Multi-layer Hard Faced Samples

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Ruzica R Nikolic, Dušan Arsić

  55. Working Life of the I-beam with a Crack

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Ruzica R Nikolic

  56. Investigation of the Lubricants Influence on the Ironing Process

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Ruzica R Nikolic, Dušan Arsić

  57. Experimental Determination of Deformations of the Hard Faced Samples Made of Steel for Operating at Elevated Temperatures

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Ruzica R Nikolic

  58. Experimental and Numerical Analysis of Eccentrically Loaded Beam-Columns

    Article • Communications - Scientific letters of the University of Zilina, December 2014, University of Zilina

    Prof Ruzica R Nikolic

  59. Numerical determination of reliability in probabilistic design

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, December 2014, SAGE Publications

    Prof Ruzica R Nikolic

  60. Thermal Characteristics of Sandwich Plates with Prismatic Cores

    Article • Procedia Engineering, January 2014, Elsevier

    Prof Ruzica R Nikolic

  61. Interfacial crack behavior in the stationary temperature field conditions

    Article • Thermal Science, January 2014, National Library of Serbia

    Prof Ruzica R Nikolic

  62. Uniaxial tension of drying sieves

    Article • Hemijska industrija, January 2013, National Library of Serbia

    Prof Ruzica R Nikolic

  63. Fundamental Problems of Modeling the Fracture Processes in Concrete I: Micromechanics and Localization of Damages

    Article • Procedia Engineering, January 2013, Elsevier

    Prof Ruzica R Nikolic

  64. Fundamental Problems of Modeling the Fracture Processes in Concrete II: Size Effect and Selection of the Solution Approach

    Article • Procedia Engineering, January 2013, Elsevier

    Prof Ruzica R Nikolic

  65. Optimization of Technical Diagnostics Procedures for Hydroelectric Power Plants

    Article • Procedia Engineering, January 2012, Elsevier

    Prof Ruzica R Nikolic

  66. Characteristic Parameters of Dynamic Crack Growth along the Interface between the Two Orthotropic Materials

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Prof Ruzica R Nikolic

  67. Characteristic Parameters of Dynamic Crack Growth along the Interface between the Two Orthotropic Materials

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Prof Ruzica R Nikolic

  68. The LEFM Concept for Interfacial Cracks Application to the Problem of Coating Delamination on Cylindrical Substrates

    Article • Journal of Applied Mechanics, January 2012, ASME International

    Prof Ruzica R Nikolic

  69. Determination and Analysis of Influence of the Hydrodynamic, Kinematic and Geometric Parameters on the Motor Vehicles Hydrodynamic Clutch Characteristics

    Article • Procedia Engineering, January 2012, Elsevier

    Prof Ruzica R Nikolic

  70. The competition between the crack kinking away from the interface and crack propagation along the interface in elastic bicrystals

    Article • International Journal of Fracture, February 2010, Springer Science + Business Media

    Prof Ruzica R Nikolic

  71. Influence of temperature on behavior of the interfacial crack between the two layers

    Article • Thermal Science, January 2010, National Library of Serbia

    Prof Ruzica R Nikolic

  72. An approach to analysis of dynamic crack growth at bimaterial interface

    Article • Theoretical and Applied Mechanics, January 2009, National Library of Serbia

    Prof Ruzica R Nikolic

  73. Design of Columns Centrically Loaded in Compression

    Article • Communications - Scientific letters of the University of Zilina, September 2007, University of Zilina

    Prof Ruzica R Nikolic

  74. Elastic-plastic analysis of crack on bimaterial interface

    Article • Theoretical and Applied Mechanics, January 2005, National Library of Serbia

    Prof Ruzica R Nikolic

  75. Dynamic growth of anti-plane shear cracks in ideally plastic crystals

    Article • Mechanics of Materials, November 1988, Elsevier

    Prof Ruzica R Nikolic

  76. Anti-plane shear cracks in ideally plastic crystals

    Article • Journal of the Mechanics and Physics of Solids, January 1985, Elsevier

    Prof Ruzica R Nikolic

  77. Some Aspects of Dynamic Interfacial Crack Growth

    Article • Springer Science + Business Media

    Prof Ruzica R Nikolic