All Stories

  1. Analysis of Profile and Surface Roughness of Holes Drilled in Basalt Fiber Reinforced Polymers Laminates: Statistical Analysis and Predictive Approach Based on Machine Learning

    Article • Journal of Manufacturing and Materials Processing, June 2026, MDPI AG

    Rosario Domingo

  2. Analysis of Profile and Surface Roughness of Holes Drilled in Basalt Fiber Reinforced Polymers Laminates: Statistical Analysis and Predictive Approach Based on Machine Learning

    Article • May 2026, MDPI AG

    Rosario Domingo

  3. Intermittent demand forecasting of aerospace rotable parts. A framework for unpredictable flight patterns

    Article • Computers & Industrial Engineering, April 2026, Elsevier

    Rosario Domingo

  4. Analysis of the Quality of Holes Drilled at Low Temperatures in Carbon Fiber Plates with a Foamed Polyvinyl Chloride Core

    Article • Applied Sciences, March 2026, MDPI AG

    Rosario Domingo

  5. A decision-making framework for selecting industry 4.0 technologies to build supply chain resilience

    Article • The International Journal of Advanced Manufacturing Technology, December 2025, Springer Science + Business Media

    Rosario Domingo

  6. Preassembly Cryogenic Drilling in Carbon Fiber Sandwich Sheets with Inner Foam Core

    Article • Applied Sciences, March 2025, MDPI AG

    Rosario Domingo

  7. Pre-Assembly Cryogenic Drilling in Carbon Fiber Sandwich Sheets with Inner Foam Core

    Article • August 2024, MDPI AG

    Rosario Domingo

  8. Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0

    Article • Rapid Prototyping Journal, July 2024, Emerald

    Rosario Domingo

  9. Improvement of Industrial Maintenance Plans through Assistance-Driven Reliability-Centered Maintenance and Case-Based Reasoning Design

    Article • Electronics, February 2024, MDPI AG

    Rosario Domingo

  10. Improvement of Industrial Maintenance Plans through Assisted-Driven Design RCM-CBR

    Article • December 2023, MDPI AG

    Rosario Domingo

  11. An Analysis of the Circularity of the Holes in the Drilling of Basalt Fiber Reinforced Laminates

    Article • Key Engineering Materials, October 2023, Trans Tech Publications

    Rosario Domingo

  12. Delamination Factor Analysis in Cryogenically Drilled Holes in Fiberglass Reinforced Structures

    Article • Key Engineering Materials, October 2023, Trans Tech Publications

    Rosario Domingo

  13. Prospective in Additive Manufacturing Based on R-Meta-Analysis and Bibliometric Study

    Article • Advances in Science and Technology, October 2023, Trans Tech Publications

    Rosario Domingo

  14. Towards a Digital Twin Warehouse through the Optimization of Internal Transport

    Article • Applied Sciences, April 2023, MDPI AG

    Rosario Domingo

  15. Asking about Risk in a Company: A New Approach to Learning ISO 45001 in Engineering Programs

    Article • Standards, January 2023, MDPI AG

    Rosario Domingo

  16. Software Alternatives to Design Learning Activities for Lean Six Sigma in e-learning

    Article • January 2023, Springer Science + Business Media

    Rosario Domingo

  17. Study of Drilled Holes after a Cryogenic Machining in Glass Fiber-Reinforced Composites

    Article • Applied Sciences, October 2022, MDPI AG

    Rosario Domingo

  18. Trajectory Optimization in Terms of Energy and Performance of an Industrial Robot in the Manufacturing Industry

    Article • Sensors, October 2022, MDPI AG

    Rosario Domingo

  19. Assisted-Driven Design of Customized Maintenance Plans for Industrial Plants

    Article • Applied Sciences, July 2022, MDPI AG

    Rosario Domingo

  20. Influence of Maintenance Actions in the Drying Stage of a Paper Mill on CO2 Emissions

    Article • Processes, September 2021, MDPI AG

    Rosario Domingo

  21. Quantifying the Impact of Production Globalization through Application of the Life Cycle Inventory Methodology and Its Influence on Decision Making in Industry

    Article • Processes, July 2021, MDPI AG

    Rosario Domingo

  22. EMG Characterization and Processing in Production Engineering

    Article • Materials, December 2020, MDPI AG

    Rosario Domingo

  23. Opportunities and Barriers of Hydrogen–Electric Hybrid Powertrain Vans: A Systematic Literature Review

    Article • Processes, October 2020, MDPI AG

    Rosario Domingo

  24. Complexity in Manufacturing Processes and Systems 2019

    Article • Complexity, July 2020, Wiley

    Rosario Domingo

  25. Study of Drilling Process by Cooling Compressed Air in Reinforced Polyether-Ether-Ketone

    Article • Materials, April 2020, MDPI AG

    Rosario Domingo

  26. Development of Trajectories through the Kalman Algorithm and Application to an Industrial Robot in the Automotive Industry

    Article • IEEE Access, January 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Rosario Domingo

  27. Study of the roughness of carbon fiber-reinforced composite plates in peripheral cryogenic milling

    Article • January 2019, American Institute of Physics

    Rosario Domingo

  28. Complexity in Manufacturing Processes and Systems

    Article • Complexity, June 2018, Hindawi Publishing Corporation

    Rosario Domingo, Dr JULIO BLANCO, PhD Jorge Luis García-Alcaraz

  29. A Multi-Response Optimization of Thrust Forces, Torques, and the Power of Tapping Operations by Cooling Air in Reinforced and Unreinforced Polyamide PA66

    Article • Sustainability, March 2018, MDPI AG

    Rosario Domingo

  30. CO2 Emissions Reduction and Energy Efficiency Improvements in Paper Making Drying Process Control by Sensors

    Article • Sustainability, March 2017, MDPI AG

    Rosario Domingo

  31. An Approach to Integrating Tactical Decision-Making in Industrial Maintenance Balance Scorecards Using Principal Components Analysis and Machine Learning

    Article • Complexity, January 2017, Hindawi Publishing Corporation

    Rosario Domingo

  32. Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part II—Experimental Implementation

    Article • Sensors, October 2016, MDPI AG

    Rosario Domingo

  33. Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part I—Model Development

    Article • Sensors, September 2016, MDPI AG

    Rosario Domingo

  34. Design and Implementation of Active Learning Activities Focused on Simulations of Drilling in Composites

    Article • Materials Science Forum, April 2016, Trans Tech Publications

    Rosario Domingo

  35. Selection of Cutting Inserts in Dry Machining for Reducing Energy Consumption and CO2 Emissions

    Article • Energies, November 2015, MDPI AG

    Rosario Domingo

  36. Overall Environmental Equipment Effectiveness as a Metric of a Lean and Green Manufacturing System

    Article • Sustainability, July 2015, MDPI AG

    Rosario Domingo

  37. Influence of process operating parameters on CO2 emissions in continuous industrial plants

    Article • Journal of Cleaner Production, June 2015, Elsevier

    Rosario Domingo

  38. Analysis of Energy Consumption in the Dry Drilling of PEEK GF30

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Rosario Domingo

  39. A cost-benefit ergonomics methodology applied to service industry with digital human modelling

    Article • European J of Industrial Engineering, January 2014, Inderscience Publishers

    Rosario Domingo, Miguel A. Sebastián

  40. Enhancing Multistage Deep-Drawing and Ironing Manufacturing Processes of Axisymmetric Components: Analysis and Experimentation

    Article • International Journal of Manufacturing Engineering, January 2014, Hindawi Publishing Corporation

    Rosario Domingo

  41. Vectorial method of minimum zone tolerance for flatness, straightness, and their uncertainty estimation

    Article • International Journal of Precision Engineering and Manufacturing, January 2014, Springer Science + Business Media

    Rosario Domingo

  42. A Sustainable Evaluation of Drilling Parameters for PEEK-GF30

    Article • Materials, December 2013, MDPI AG

    Rosario Domingo

  43. Circle fitting from the polarity transformation regression

    Article • Precision Engineering, October 2013, Elsevier

    Rosario Domingo

  44. Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

    Article • PLOS One, August 2013, PLOS

    Rosario Domingo, Miguel A. Sebastián

  45. Assessing the Acquisition of Generic Skills in Open Postgraduate Studies in Advanced Manufacturing Engineering

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Rosario Domingo

  46. Online Activities Development to Improve the Understanding of the Processes for Sheet Cold Forming

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Rosario Domingo

  47. Model of efficient and sustainable improvements in a lean production system through processes of environmental innovation

    Article • Journal of Cleaner Production, May 2013, Elsevier

    Rosario Domingo

  48. Modular Procedure to Improve the Application of the Upper-Bound Theorem in Forging

    Article • Materials and Manufacturing Processes, March 2013, Taylor & Francis

    Rosario Domingo, Dr. Ana María Camacho López

  49. A First Approach to the Use of CO2 Emissions as a Maintenance Indicator in Industrial Plants

    Article • Procedia Engineering, January 2013, Elsevier

    Rosario Domingo

  50. Determination of Energy during the Dry Drilling of PEEK GF30 Considering the Effect of Torque

    Article • Procedia Engineering, January 2013, Elsevier

    Rosario Domingo

  51. APLICACIONES ERGONÓMICAS EN LAS PRIMERAS ETAPAS DE DISEÑO PARA LA INGENIERÍA DE PROCESOS INDUSTRIALES

    Article • DYNA, January 2013, Publicaciones DYNA

    Rosario Domingo

  52. Improvement of the Mechanical Properties of Formed Steel Cross Section Profile for Timber Upgrading

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Rosario Domingo

  53. Optimization of cold formed steel cross section profile for timber upgrading

    Article • January 2012, American Institute of Physics

    Rosario Domingo

  54. The Formation of Saw Toothed Chip in a Titanium Alloy: Influence of Constitutive Models

    Article • Strojniški vestnik – Journal of Mechanical Engineering, October 2011, Faculty of Mechanical Engineering

    Rosario Domingo, Miguel A. Sebastián

  55. The development of competencies in manufacturing engineering by means of a deep-drawing tool

    Article • Journal of Intelligent Manufacturing, July 2011, Springer Science + Business Media

    Rosario Domingo, Miguel A. Sebastián

  56. Evaluation of Thrust Forces in Dry Drilling of UNS A97050 Alloy

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Dr Mariano Marcos, Rosario Domingo, Miguel A. Sebastián

  57. Analysis of plate drawing processes by the upper bound method using theoretical work-hardening materials

    Article • The International Journal of Advanced Manufacturing Technology, January 2009, Springer Science + Business Media

    Rosario Domingo, Miguel A. Sebastián

  58. Redesigning an assembly line through lean manufacturing tools

    Article • The International Journal of Advanced Manufacturing Technology, October 2008, Springer Science + Business Media

    Rosario Domingo

  59. Systemic criterion of sustainability in agile manufacturing

    Article • International Journal of Production Research, June 2008, Taylor & Francis

    Rosario Domingo

  60. Operational flexibility quantification in a make-to-order assembly system

    Article • International Journal of Flexible Manufacturing Systems, September 2007, Springer Science + Business Media

    Rosario Domingo, Miguel A. Sebastián

  61. Materials flow improvement in a lean assembly line: a case study

    Article • Assembly Automation, April 2007, Emerald

    Rosario Domingo

  62. Analysis of the influence of back-pull in drawing process by the finite element method

    Article • Journal of Materials Processing Technology, May 2005, Elsevier

    Rosario Domingo, Dr. Ana María Camacho López

  63. Análisis del Diseño y Programación de Celdas en Entornos de Fabricación Ágil

    Article • Información tecnológica, January 2004, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Rosario Domingo