All Stories

  1. How far can one stainless steel fastener cause corrosion on an aluminum alloy panel?

    Article • CORROSION, March 2020, NACE International

    Rob Kelly, Rebecca Skelton Marshall

  2. The Role of H2O2 and K2S2O8 as Oxidizing Agents for Accelerated Corrosion Testing

    Article • CORROSION, February 2020, NACE International

    Rob Kelly

  3. Improved Atmospheric Corrosion Testing for Aluminum Alloys Part II: Developing Improved Testing Protocol

    Article • CORROSION, November 2019, NACE International

    Rob Kelly

  4. Improved Atmospheric Corrosion Testing for Aluminum Alloys Part I: Deconstructing ASTM G85-A2

    Article • CORROSION, November 2019, NACE International

    Rob Kelly

  5. Deconstructing the Electrochemical Basis of ASTM G34 and ANCIT

    Article • CORROSION, September 2018, NACE International

    Rob Kelly

  6. intergranular corrosion and sensitization in additively manufactured stainless steel

    Article • CORROSION, February 2018, NACE International

    Rob Kelly

  7. On a Recent Quantitative Framework Examining the Critical Factors for Localized Corrosion and Its Impact on the Galvele Pit Stability Criterion

    Article • CORROSION, January 2017, NACE International

    Rob Kelly

  8. Localized Corrosion: Crevice Corrosion

    Article • January 2017, Elsevier

    Rob Kelly

  9. Investigating the Impact of Accelerated Testing Variables on the Exfoliation Corrosion of AA2060

    Article • CORROSION, November 2016, NACE International

    Rob Kelly

  10. Cathodic Control of Intergranular Corrosion Propagation in Al-Mg Alloys Under Thin Film Conditions

    Article • CORROSION, October 2016, NACE International

    Rob Kelly

  11. Crack Chemistry Control of Intergranular SCC in Sensitized Al-Mg

    Article • CORROSION, November 2015, NACE International

    Prof. Richard P. Gangloff, Rob Kelly

  12. Review of Intergranular Corrosion Mechanisms, Phenomenological Observations, and Modeling

    Article • CORROSION, November 2015, NACE International

    Rob Kelly

  13. Overview of Intergranular Corrosion Mechanisms, Phenomenological Observations, and Modeling of AA5083

    Article • CORROSION, November 2015, NACE International

    Rob Kelly

  14. Experimental and Modeling Studies on Mass Transport and Electrochemical Factors Influencing Stainless Steel Pitting and Repassivation

    Article • CORROSION, December 2014, NACE International

    Rob Kelly

  15. Improved Accelerated Testing for Localized Corrosion Susceptibility of High-Strength Aluminum Alloys

    Article • Materials Science Forum, June 2014, Trans Tech Publications

    Rob Kelly

  16. Galvanically Induced Intergranular Corrosion of AA5083-H131 Under Atmospheric Exposure Conditions: Part 2—Modeling of the Damage Distribution

    Article • CORROSION, July 2013, NACE International

    Rob Kelly

  17. Galvanically Induced Intergranular Corrosion of AA5083-H131 Under Atmospheric Exposure Conditions: Part 1—Experimental Characterization

    Article • CORROSION, June 2013, NACE International

    Rob Kelly

  18. Comparability and accuracy of time of wetness sensing methods relevant for atmospheric corrosion

    Article • Corrosion Science, February 2013, Elsevier

    Rob Kelly

  19. Intergranular Corrosion Penetration in an Al-Mg Alloy as a Function of Electrochemical and Metallurgical Conditions

    Article • CORROSION, January 2013, NACE International

    Rob Kelly

  20. Modification of ASTM B117 Salt Spray Corrosion Test and Its Correlation to Field Measurements of Silver Corrosion

    Article • CORROSION, March 2012, NACE International

    Rob Kelly

  21. Wetting phenomena and time of wetness in atmospheric corrosion: a review

    Article • Corrosion Reviews, January 2012, De Gruyter

    Rob Kelly

  22. Intergranular Corrosion Penetration in AA5083 (UNS # A95083) as a Function of Electrochemical and Metallurgical Conditions

    Article • January 2012, The Electrochemical Society

    Rob Kelly

  23. Influence of UV irradiation and ozone on atmospheric corrosion of bare silver

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, April 2010, Taylor & Francis

    Rob Kelly

  24. Crevice Corrosion

    Article • December 2007, Wiley

    Rob Kelly

  25. An Analytical Modeling Method for Calculating the Current Delivery Capacity of a Thin-Film Cathode and the Stability of Localized Corrosion under Atmospheric Environments

    Article • January 2007, The Electrochemical Society

    Rob Kelly

  26. Computaional Modeling of the Stability of Crevice Corrosion of Wetted SS316L

    Article • April 2006, Office of Scientific and Technical Information (OSTI)

    Rob Kelly

  27. Computational Modeling of the Stability of Crevice Corrosion of Wetted SS316L

    Article • January 2006, The Electrochemical Society

    Rob Kelly

  28. The Effects of CPC Coatings on the Corrosion/Fatigue Behavior of AA7075-T6

    Article • January 2006, The Electrochemical Society

    Rob Kelly

  29. Perspectives on Localized Corrosion in Thin Layers of Particulate

    Article • MRS Proceedings, January 2006, Cambridge University Press

    Rob Kelly

  30. Computational modeling of cathodic limitations on localized corrosion of wetted SS 316L at room temperature

    Article • Corrosion Science, December 2005, Elsevier

    Rob Kelly

  31. Test Environment Selection for Corrosion-Fatigue Testing of Aluminum Alloy 7075-T6

    Article • CORROSION, June 2005, NACE International

    Rob Kelly

  32. Performance Assessment and Prediction of Corrosion Prevention Compounds with Electrochemical Impedance Spectroscopy

    Article • CORROSION, February 2005, NACE International

    Rob Kelly

  33. Wicking and Water Displacement by Corrosion Prevention Compounds in Simulated Aircraft Aluminum Alloy Lap Joints

    Article • CORROSION, February 2005, NACE International

    Rob Kelly

  34. Passivity and Localized Corrosion

    Article • September 2002, Taylor & Francis

    Rob Kelly

  35. Electrochemical Techniques in Corrosion Science and Engineering

    Article • September 2002, Taylor & Francis

    Rob Kelly

  36. Electrochemical Thermodynamics and Kinetics of Relevance to Corrosion

    Article • September 2002, Taylor & Francis

    Rob Kelly

  37. Development of an Aircraft Lap Joint Simulant Environment

    Article • CORROSION, May 2002, NACE International

    Rob Kelly

  38. Fabrication of a Conductometric Sensor for Crevice Corrosion Studies

    Article • MRS Proceedings, January 2002, Cambridge University Press

    Rob Kelly

  39. Comparison of Methods for Removal of Corrosion Product from AA2024-T3

    Article • CORROSION, February 2001, NACE International

    Rob Kelly

  40. Microfabrication of Crevice Corrosion Samples

    Article • MRS Proceedings, January 2000, Cambridge University Press

    Rob Kelly

  41. Embeddable sensor for corrosion measurement

    Article • February 1999, SPIE

    Rob Kelly

  42. Occluded solution chemistry control and the role of alloy sulfur on the initiation of crevice corrosion in type 304ss

    Article • Corrosion Science, November 1998, Elsevier

    Rob Kelly

  43. Influence of Alloy Sulfur Content and Bulk Electrolyte Composition on Crevice Corrosion Initiation of Austenitic Stainless Steel

    Article • CORROSION, February 1998, NACE International

    Rob Kelly

  44. The role of dihydroxybenzenes and oxygen on the corrosion of steel in black liquor

    Article • Corrosion Science, July 1996, Elsevier

    Rob Kelly

  45. Mechanism of Dissimilar Metal Crevice Corrosion of Superferritic Stainless Steels

    Article • CORROSION, November 1995, NACE International

    Rob Kelly

  46. The electrochemistry of iron in methanolic solutions and its relation to corrosion

    Article • Corrosion Science, September 1995, Elsevier

    Rob Kelly

  47. The Effects of Impurities on the Corrosion Behavior of Iron in Methanolic Solutions

    Article • October 1993, SAE International

    Rob Kelly

  48. Characterization of the crevice solution chemistry of 304 stainless steel

    Article • Corrosion Science, January 1993, Elsevier

    Rob Kelly

  49. Corrosion of packaged galvanised steel analysed by capillary electrophoresis

    Article • British Corrosion Journal, January 1993, Taylor & Francis

    Rob Kelly

  50. Advanced Materials : Corrosion and Electrochemistry

    Article • January 1991, Springer Science + Business Media

    Rob Kelly

  51. The passivity of metals in organic solutions

    Article • Corrosion Science, January 1990, Elsevier

    Rob Kelly

  52. An Electrochemical Test for Detecting the Intergranular Corrosion Susceptibility of a Duplex Stainless Steel

    Article • CORROSION, September 1986, NACE International

    Rob Kelly