All Stories

  1. Influence of Polishing and Glazing on Surface Characteristics and Biofilm Formation on Zirconia: An In Vitro Study
  2. Influence of Prosthetic Interface and Manufacturing Metal on Mechanical Behavior of Two Extra Narrow Implants
  3. Impact of high-consumption beverages on the color, and surface roughness and microhardness of resin-matrix ceramics
  4. Effects of processing techniques of monolithic lithium disilicate ceramic on wear resistance against zirconia antagonist
  5. Torque Loss, Survival, and Strain Distribution of Implant-Supported Prostheses with Zirconia and Cobalt–Chromium Hybrid Abutments
  6. In Vitro Wear of Human Enamel Against Monolithic Zirconia After Staining, Glazing and Polishing Treatments
  7. Effect of Staining, Glazing and Polishing on the Survival Probability of Monolithic Zirconia Crowns
  8. Microbial Leakage through Three Different Implant–Abutment Interfaces on Morse Taper Implants In Vitro
  9. Evaluation of Vertical Misfit and Torque Loss of Different Abutments for Tri-Channel Type Internal Connection Dental Implants After Mechanical Cycling
  10. Influence of Torque on Platform Deformity of the Tri-Channel Implant: Two- and Three-Dimensional Analysis Using Micro-Computed Tomography
  11. Influence of Torque on Platform Deformity of the Tri-channel Implant: Two and Three-Dimensional Analysis Using Micro Computed Tomography
  12. Bacterial Detection, Deformation, and Torque Loss on Dental Implants with Different Tapered Connections Compared with External Hexagon Connection after Thermomechanical Cycling
  13. Mechanical comparison of milled fiber-reinforced resin composite and Co–Cr frameworks with different connector cross-sectional geometries: An in vitro study
  14. Wear Behavior of Monolithic Zirconia after Staining, Glazing, and Polishing Opposing Dental Restorative Materials: An In Vitro Study
  15. Mechanical Properties, Wear Resistance, and Reliability of Two CAD-CAM Resin Matrix Ceramics
  16. Y-TZP Physicochemical Properties Conditioned with ZrO2 and SiO2 Nanofilms and Bond Strength to Dual Resin Cement
  17. Translucency and mechanical behavior of  partially stabilized monolithic zirconia after staining, finishing procedures and artificial aging
  18. Strain Behavior of Implant-Supported Full-Arch Fixed Dental Prostheses Supported by Four or Five Implants
  19. Microbial communities of titanium versus zirconia abutments on implant‐supported restorations: Biodiversity composition and its impact on clinical parameters over a 3‐year longitudinal prospective study
  20. Genomic Evaluation of Formed Biofilm on Dental Implants with Different Surface Treatments Associated with Zirconia or Titanium Abutments: An In Vitro Study
  21. Effect of different grinding protocols on surface characteristics and fatigue behavior of yttria-stabilized zirconia polycrystalline: An in vitro study
  22. Internal and Marginal Fit and Fracture Strength of Narrow Diameter Dental Implant-Abutment Assembly
  23. A completely digital workflow for an interim implant-supported crown: A clinical report
  24. A 3‐year longitudinal prospective study assessing microbial profile and clinical outcomes of single‐unit cement‐retained implant restorations: Zirconia versus titanium abutments
  25. Physical properties of conventional and monolithic yttria-zirconia materials after low-temperature degradation
  26. Influence of Different Implants on the Biomechanical Behavior of Tooth-Implant Fixed Partial Dentures: A Three-Dimensional Finite Element Analysis.
  27. Effects of Surface Treatments on Mechanical Behavior of Sintered and Pre-sintered Yttria-Stabilized Zirconia and Reliability of Crowns and Abutments Processed by CAD/CAM
  28. Fracture loads and failure modes of customized and non-customized zirconia abutments
  29. Análise de Elementos Finitos em Modelo Tridimensional da Distribuição do Estresse Gerada por Próteses Esplintadas ou não Esplintadas na Reabilitação de Diferentes Alturas Ósseas com Implantes Cone Morse Regulares ou Curtos
  30. Fracture toughness of three heat pressed ceramic systems
  31. Strain transfer behavior of different planning options for mandibular single-molar replacement
  32. Custom Morse taper zirconia abutments: Influence on marginal fit and torque loss before and after thermomechanical cycling
  33. A new energy management strategy for a grid connected wind turbine-battery storage power plant
  34. Oral bacterial colonization on dental implants restored with titanium or zirconia abutments: 6-month follow-up
  35. Genome analysis and clinical implications of the bacterial communities in early biofilm formation on dental implants restored with titanium or zirconia abutments
  36. Influence of Manufacturing Methods of Implant-Supported Crowns on External and Internal Marginal Fit: A Micro-CT Analysis
  37. Biomechanical behavior of titanium and zirconia frameworks for implant-supported full-arch fixed dental prosthesis
  38. A Digital Image Correlation Analysis of Strain Generated by 3-Unit Implant-Supported Fixed Dental Prosthesis
  39. Microleakage at Different Implant-Abutment Connections Under Unloaded and Loaded Conditions
  40. Os Efeitos de Diferentes Tempos de Aplicação de Carga Sobre a Resposta Óssea em Torno dos Implantes Dentários: Um Estudo Histomorfométrico em Cães
  41. The dental alloys determine the choice of composite resins to be used.
  42. A Three-Dimensional Finite Element Analysis of the Stress Distribution Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges with Regular or Short Morse Taper Implants
  43. Wear resistance and compression strength of ceramics tested in fluoride environments
  44. Tensile Strength of Resin Cements Used with Base Metals in a Simulating Passive Cementation Technique for Implant-Supported Prostheses
  45. Fracture Strength of Weakened Anterior Teeth Associated to Different Reconstructive Techniques
  46. Abutments with reduced diameter for both cement and screw retentions: analysis of failure modes and misfit of abutment-crown-connections after cyclic loading
  47. Microbiome of titanium and zirconia dental implants abutments
  48. Stress Over Implants of One-Piece Cast Frameworks Made With Different Materials
  49. Influence of Cyclic Fatigue in Water on Screw Torque Loss of Long-Span One-Piece Implant-Supported Zirconia Frameworks
  50. Reliability of FEA on the Results of Mechanical Properties of Materials
  51. Marginal fit and microbial leakage along the implant-abutment interface of fixed partial prostheses: An in vitro analysis using Checkerboard DNA-DNA hybridization
  52. Torque Loss of Different Abutment Sizes Before and After Cyclic Loading
  53. Photoelastic comparison of as-cast and laser-welded implant frameworks
  54. In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations
  55. Three-dimensional finite element analysis of endodontically treated teeth with weakened radicular walls restored with different protocols
  56. Experimental titanium alloys for dental applications
  57. Influence of the casting processing route on the corrosion behavior of dental alloys
  58. Effect of cyclic loading on the vertical microgap of long-span zirconia frameworks supported by 4 or 6 implants
  59. Correlation Between Vertical Misfits and Stresses Over Implants From Castable Frameworks Made of Different Alloys
  60. Comparison of the correlation of photoelasticity and digital imaging to characterize the load transfer of implant-supported restorations
  61. Effect of surface treatment on the bond strength between yttria partially stabilized zirconia ceramics and resin cement
  62. Wear resistance of a pressable low-fusing ceramic opposed by dental alloys
  63. Impact of temperature and time storage on the microbial detection of oral samples by Checkerboard DNA–DNA hybridization method
  64. Loss of Preload in Screwed Implant Joints as a Function of Time and Tightening/Untightening Sequences
  65. Torque loss under mechanical cycling of long-span zirconia and titanium-cemented and screw-retained implant-supported CAD/CAM frameworks
  66. Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study
  67. Screw loosening of different UCLA-type abutments after mechanical cycling
  68. The use of a mandibular repositioning device for obstructive sleep apnea
  69. In vivo evaluation of Candida spp. adhesion on titanium or zirconia abutment surfaces
  70. A three-dimensional finite element analysis of the stress distribution on morse taper implants surface
  71. Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation
  72. Bacterial adhesion on the titanium and zirconia abutment surfaces
  73. Retention and stress distribution in distal extension removable partial dentures with and without implant association
  74. Mechanical Comparison of Experimental Conical-Head Abutment Screws with Conventional Flat-Head Abutment Screws for External-Hex and Internal Tri-Channel Implant Connections: An In Vitro Evaluation of Loosening Torque
  75. Photoelastic Analysis of Stresses Transmitted by Universal Cast to Long Abutment on Implant-Supported Single Restorations Under Static Occlusal Loads
  76. Three-Dimensional Finite Element Analysis of Stress Distribution on Different Bony Ridges With Different Lengths of Morse Taper Implants and Prosthesis Dimensions
  77. Oral biofilm formation on the titanium and zirconia substrates
  78. Effect of fluoride sodium mouthwash solutions on cpTI: evaluation of physicochemical properties
  79. Effect of whitening toothpaste on titanium and titanium alloy surfaces
  80. Effect of acetyl resin retentive arms on the retentive force of circumferential clasps: An in vitro study
  81. Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique
  82. Effects of chemical composition on the corrosion of dental alloys
  83. Abutment Rotational Freedom Evaluation of External Hexagon Single-Implant Restorations after Mechanical Cycling
  84. Mechanical analysis of conventional and small diameter conical implant abutments
  85. A digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution
  86. Effect of different investments and mold temperatures on titanium mechanical properties
  87. Prosthetic misfit of implant-supported prosthesis obtained by an alternative section method
  88. Wear resistance of experimental titanium alloys for dental applications
  89. Correlation between vertical misfits and stresses transmitted to implants from metal frameworks
  90. Effect of laser welding on the titanium ceramic tensile bond strength
  91. Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study
  92. Endodontically treated teeth: Characteristics and considerations to restore them
  93. Digital image correlation analysis of the load transfer by implant-supported restorations
  94. Photoelastic Stress Analysis of Different Designs of Cement-Retained Fixed Partial Dentures on Morse Taper Oral Implants
  95. Evaluation of screw loosening on new abutment screws and after successive tightening
  96. Comparative study of two commercially pure titanium casting methods
  97. Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents
  98. The Effect of Coating Patterns with Spinel-Based Investment on the Castability and Porosity of Titanium Cast into Three Phosphate-Bonded Investments
  99. Effect of phosphate-bonded investments on titanium reaction layer and crown fit
  100. Modified section method for laser-welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks
  101. Implant/abutment vertical misfit of one-piece cast frameworks made with different materials
  102. Anin vitrostudy of non-axial forces upon the retention of an O-ring attachment
  103. Effect of temperature variation on the cytotoxicity of cast dental alloys and commercially pure titanium
  104. Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists
  105. An Alternative Section Method for Casting and Posterior Laser Welding of Metallic Frameworks for an Implant-Supported Prosthesis
  106. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: anin vitrostudy
  107. Effect of fluoride-containing solutions on the surface of cast commercially pure titanium
  108. Effect of laser welding on the titanium composite tensile bond strength
  109. Accuracy of stone casts obtained by different impression materials
  110. Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents
  111. Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium
  112. In vitro cytotoxicity of dental alloys and cpTi obtained by casting
  113. Retention force of T-bar clasps for titanium and cobalt-chromium removable partial dentures
  114. Relation between implant/abutment vertical misfit and torque loss of abutment screws
  115. The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks
  116. Internal adaptation of cast titanium crowns
  117. Influence of the final temperature of investment healting on the tensile strength and Vickers hardness of CP Ti and Ti-6Al-4V alloy
  118. Analysis of the relationship between the surface hardness and Wear resistance of indirect composites used as veneer materials
  119. The effect of mold temperature on castability of CP Ti and Ti–6Al–4V castings into phosphate bonded investment materials
  120. Influence of the Interimplant Distance on Crestal Bone Resorption and Bone Density: A Histomorphometric Study in Dogs
  121. Clinical evaluation of interocclusal recording materials in bilateral free end cases
  122. Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique
  123. In vitro comparative analysis of the fit of gold alloy or commercially pure titanium implant-supported prostheses before and after electroerosion
  124. Comparison of retentive systems for composites used as alternatives to porcelain in fixed partial dentures
  125. Evaluation of the adaptation interface of one-piece implant-supported superstructures obtained in Ni-Cr-Ti and Pd-Ag alloys
  126. Comparative study of circumferential clasp retention force for titanium and cobalt-chromium removable partial dentures
  127. Castability and resistance of ceramometal bonding in Ni-Cr and Ni-Cr-Be alloys
  128. Device for recording the path of insertion for removable partial dentures
  129. Ear symptomatology and occlusal factors: A clinical report
  130. Avaliação da resistência da união metal-resina usando sistemas de retenção mecânico e químico
  131. Avaliação da fundibilidade de uma liga de cobalto-cromo
  132. Effect of beryllium on the castability and resistance of ceramometal bonds in nickel-chromium alloys
  133. Fabrication of an acrylic resin device used to increase the size of toothbrush handles
  134. Surveying removable partial dentures: the importance of guiding planes and path of insertion for stability