All Stories

  1. Experimental and numerical analysis on the cutting force, cutting temperature, and tool wear of alloy steel (4340) during turning process

    Article • AIP Advances, November 2024, American Institute of Physics

    Dr Ravichandran Manickam

  2. Variation of electrode materials and parameters in the EDM of an AA7075-TiO2 composite

    Article • Materials Testing, February 2021, De Gruyter

    Dr Ravichandran Manickam

  3. Mechanical properties of basalt fabric plain and twill weave reinforced epoxy composites

    Article • Materials Today Proceedings, April 2020, Elsevier

    Dr Ravichandran Manickam

  4. Two-body abrasive wear behavior of woven basalt fabric reinforced epoxy and polyester composites

    Article • Materials Research Express, March 2020, Institute of Physics Publishing

    Dr Ravichandran Manickam

  5. Effect of cellulosic filler loading on mechanical and thermal properties of date palm seed/vinyl ester composites

    Article • International Journal of Biological Macromolecules, March 2020, Elsevier

    Dr Ravichandran Manickam

  6. Mechanical properties of magnesium-silicon carbide composite fabricated through powder metallurgy route

    Article • Materials Today Proceedings, March 2020, Elsevier

    Dr Ravichandran Manickam

  7. Effect of various reinforcements on properties of metal matrix composites: A review

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  8. Investigations on properties of Mg-Al2O3 composites fabricated via stir casting route

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  9. Mechanical properties and applications of Magnesium alloy – Review

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  10. Optimization of electric discharge machining parameters on surface roughness for Al/ZrO2 composite through response surface methodology

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  11. Optimization of electric discharge machining process parameters on AA6351-Al2O3 composites

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  12. Processing and properties of carbon nanotube reinforced composites: A review

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  13. Review on study of thermosetting and thermoplastic materials in the automated fiber placement process

    Article • Materials Today Proceedings, February 2020, Elsevier

    Dr Ravichandran Manickam

  14. Parametric studies on dry sliding wear behaviour of Al-7075 alloy matrix composite using S/N ratio and ANOVA analysis

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Dr Ravichandran Manickam

  15. A Taguchi coupled desirability function analysis of wire cut EDM behaviour of titanium dioxide filled aluminium matrix composite

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  16. A review on recent advancements in fused deposition modeling

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  17. A review on the categorization of the welding process of pure titanium and its characterization

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  18. Advancement in materials for industrial safety helmets

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  19. Influence of CNC turning variables on high strength Beryllium-Copper (C17200) alloy using tungsten carbide insert

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  20. Review on exploration of graphene in diverse applications and its future horizon

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  21. A review on recent progresses in machining methods based on abrasive water jet machining

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  22. Effect of EDM process parameters on material removal rate and surface roughness of metal matrix composites: A review

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  23. Experimental investigation and characterization of brass – AlN composites synthesized using powder metallurgy technique

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  24. Experimental investigation on AW 106 Epoxy/E-Glass fiber/nano clay composite for wind turbine blade

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  25. Experimental investigation on influence of process parameter on friction stir processing of AA6082 using response surface methodology

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  26. Hot tensile test for determining the material constant on superplastic 5083Al alloy sheet

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  27. Investigations on microstructure and mechanical properties of Mg-5wt.% Cu-TiB2 composites produced via powder metallurgy route

    Article • Journal of Mining and Metallurgy Section B Metallurgy, January 2020, National Library of Serbia

    Dr Ravichandran Manickam

  28. Optimization of brazing process parameters in butt joint of brass 319 using Taguchi method

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  29. Prediction of surface roughness and tool wear in milling process on brass (C26130) alloy by Taguchi technique

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  30. Tribological and mechanical properties of Zirconium Di-boride (ZrB2) particles reinforced aluminium matrix composites

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr Ravichandran Manickam

  31. Friction stir processing (FSP) of numerical study based on design of experiment-review

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr Ravichandran Manickam

  32. Magnesium matrix composite for biomedical applications through powder metallurgy – Review

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr Ravichandran Manickam

  33. Parametric optimization for friction stir welding with AA2024 and AA6061 aluminium alloys by ANOVA and GRG

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr Ravichandran Manickam

  34. Study of moisture absorption characteristics of jute fiber reinforced waste plastic filled polymer composite

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr Ravichandran Manickam

  35. Study of tribological and water intake characteristics of epoxy based hybrid composite

    Article • Materials Today Proceedings, December 2019, Elsevier

    Dr Ravichandran Manickam

  36. Investigations on tribological behaviour of AA7075-TiO2 composites under dry sliding conditions

    Article • Industrial Lubrication and Tribology, November 2019, Emerald

    Dr Ravichandran Manickam

  37. Mechanical and tribological characteristics of ZrO2 reinforced Al2014 matrix composites produced via stir casting route

    Article • Materials Research Express, November 2019, Institute of Physics Publishing

    Dr Ravichandran Manickam

  38. Experimental investigations on abrasive water jet machining of nickel-based superalloy

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, November 2019, Springer Science + Business Media

    Dr Ravichandran Manickam

  39. Optimization of wear parameters using Taguchi grey relational analysis and ANN-TLBO algorithm for silicon nitride filled AA6063 matrix composites

    Article • Materials Research Express, August 2019, Institute of Physics Publishing

    Dr Ravichandran Manickam

  40. Influence of AlN particles on microstructure, mechanical and tribological behaviour in AA6351 aluminum alloy

    Article • Materials Research Express, August 2019, Institute of Physics Publishing

    Dr Ravichandran Manickam

  41. Tribological Behavior of AA7050-ZrSiO4 Composites Synthesized by Stir Casting Technique

    Article • Mechanics and Mechanical Engineering, July 2019, De Gruyter

    Dr Ravichandran Manickam

  42. Microstructure and properties of high strength Al-Fe-Cu-Si-Zn alloy (AA8079) produced by mechanical alloying and powder metallurgy

    Article • Materials Testing, July 2019, Carl Hanser Verlag

    Dr Ravichandran Manickam

  43. Optimization of powder metallurgy parameters to obtain low corrosion rate and high compressive strength in Al-MoO3 composites using SN ratio and ANOVA analysis

    Article • Materials Research Express, July 2019, Institute of Physics Publishing

    Dr Ravichandran Manickam

  44. Experimental investigation on mechanical properties of AA7075-AlN composites

    Article • Materials Testing, May 2019, De Gruyter

    Dr Ravichandran Manickam

  45. Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route

    Article • Materials Research Express, May 2019, Institute of Physics Publishing

    Dr Ravichandran Manickam

  46. Optimization of process parameters of boron carbide filled Aluminium matrix composites using Grey Taguchi method

    Article • Materials Research Express, April 2019, Institute of Physics Publishing

    Dr Ravichandran Manickam

  47. Evaluation of mechanical and thermal properties of tamarind seed filler reinforced vinyl ester composites

    Article • Journal of Vinyl Technology, January 2019, Wiley

    Dr Ravichandran Manickam

  48. Investigation on mechanical properties and wear behaviour of titanium diboride reinforced composites

    Article • FME Transaction, January 2019, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr Ravichandran Manickam

  49. Optimization of abrasive water jet machining parameters for α-β brass using Taguchi methodology

    Article • FME Transaction, January 2019, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr Ravichandran Manickam

  50. Mechanical properties and machinability of waspaloy for aerospace applications – review

    Article • IOP Conference Series Materials Science and Engineering, October 2018, Institute of Physics Publishing

    Dr Ravichandran Manickam

  51. Synthesis of metal matrix composites and alloys by mechanical alloying: A Review

    Article • IOP Conference Series Materials Science and Engineering, September 2018, Institute of Physics Publishing

    Dr Ravichandran Manickam

  52. Synthesis, properties and microstructure of sintered and hot extruded boron carbide reinforced AA8079 (Al-Cu-Fe-Si-Zn) matrix composites

    Article • Materials Research Express, September 2018, Institute of Physics Publishing

    Dr Ravichandran Manickam

  53. Synthesis, properties and EDM behavior of 10 wt.-% ZrB2 reinforced AA7178 matrix composites

    Article • Materials Testing, September 2018, Carl Hanser Verlag

    Dr Ravichandran Manickam

  54. Wire electrical discharge machining of AA6063-TiC particle reinforced metal matrix composites using Taguchi method

    Article • Materials Research Express, August 2018, Institute of Physics Publishing

    Dr Ravichandran Manickam

  55. Optimization of wear parameters and their relative effects on stir cast AA6063-Si3N4 Composite

    Article • Materials Research Express, August 2018, Institute of Physics Publishing

    Dr Ravichandran Manickam

  56. Synthesis, Characterization and Wire Electric Erosion Behaviour of AA7178-10 wt.% ZrB2 Composite

    Article • Silicon, April 2018, Springer Science + Business Media

    Dr Ravichandran Manickam

  57. Investigations on Characterization and Properties of Al-MoO3 Composites Synthesized Using Powder Metallurgy Technique

    Article • Silicon, April 2018, Springer Science + Business Media

    Dr Ravichandran Manickam

  58. Optimization of tungsten inert gas welding parameters to

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr Ravichandran Manickam

  59. Aluminium Metal Matrix Composite with Zirconium diboride Reinforcement: A Review

    Article • Materials Today Proceedings, January 2018, Elsevier

    Dr Ravichandran Manickam

  60. Recent Issues in Materials and Manufacturing

    Article • Advances in Mechanical Engineering, December 2017, SAGE Publications

    Dr Ravichandran Manickam

  61. Optimization of Current, Voltage and Powder Feed Rate on Mechanical Properties of Plasma Transferred Arc Welded SS 316 Joints

    Article • HTM Journal of Heat Treatment and Materials, October 2017, Carl Hanser Verlag

    Dr Ravichandran Manickam

  62. Investigation on TIG welding parameters of 2205 duplex stainless steel

    Article • International Journal of Automotive and Mechanical Engineering, September 2017, Universiti Malaysia Pahang Publisher

    Dr Ravichandran Manickam

  63. Synthesis, characterization and forming behavior of hybrid copper matrix composites produced using powder metallurgy

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), July 2017, Carl Hanser Verlag

    Dr Ravichandran Manickam

  64. Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites

    Article • Particulate Science And Technology, May 2017, Taylor & Francis

    Dr Ravichandran Manickam

  65. Mechanical, electrical, and corrosion behavior of AA6063/TiC composites

    Article • Journal of Materials Research, January 2017, Cambridge University Press

    Dr Ravichandran Manickam

  66. Synthesis, characterization and properties of stir cast AA6351-aluminium nitride (AlN) composites

    Article • Journal of Materials Research, December 2016, Cambridge University Press

    Dr Ravichandran Manickam

  67. Microstructure and Properties of Hot Extruded Al-TiO2 Powder Metallurgic Composites

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr Ravichandran Manickam, Composite Dinesh kumar s a

  68. Effect of Welding Parameters on Mechanical Properties of Plasma Transferred Arc Welded SS 202 Plates

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr Ravichandran Manickam

  69. Investigations on Properties of Al-B4C Composites Synthesized through Powder Metallurgy Route

    Article • Applied Mechanics and Materials, September 2016, Trans Tech Publications

    Dr Ravichandran Manickam

  70. Parametric optimization of EDM process on α–β brass using Taguchi approach

    Article • Russian Journal of Non-Ferrous Metals, September 2016, Allerton Press

    Dr Ravichandran Manickam

  71. Investigations on Erosion and Corrosion Behavior of High-Velocity Oxy-Fuel Sprayed WC-Cr3C2-Ni Coatings on AISI 1018 Steel

    Article • HTM Journal of Heat Treatment and Materials, August 2016, Carl Hanser Verlag

    Dr Ravichandran Manickam

  72. Parametric optimization of electrical discharge machining process on α–β brass using grey relational analysis

    Article • Journal of Materials Research, June 2016, Cambridge University Press

    Dr Ravichandran Manickam

  73. JMR volume 31 issue 10 Cover and Front matter

    Article • Journal of Materials Research, May 2016, Cambridge University Press

    Dr Ravichandran Manickam

  74. JMR volume 31 issue 10 Cover and Back matter

    Article • Journal of Materials Research, May 2016, Cambridge University Press

    Dr Ravichandran Manickam

  75. Hot Upset Studies on Sintered (Al–TiO2–Gr) Powder Metallurgy Hybrid Composite

    Article • Strength of Materials, May 2016, Springer Science + Business Media

    Dr Ravichandran Manickam

  76. Experimental investigations of Al-TiO2-Gr hybrid composites fabricated by stir casting

    Article • Materials Testing, March 2016, Carl Hanser Verlag

    Dr Ravichandran Manickam

  77. Optimization of welding parameters to attain maximum strength in friction stir welded AA7075 joints

    Article • Materials Testing, March 2016, Carl Hanser Verlag

    Dr Ravichandran Manickam

  78. Study of the Characteristics of AL + 5 wt.% TiO2 + 6 wt.% GR Hybrid P/M Composite Powders Prepared by the Process of Ball Milling

    Article • Materials Science, January 2016, Springer Science + Business Media

    Dr Ravichandran Manickam

  79. Effect of SiC Coating on Fuel Consumption and Emission Control in IC Engines

    Article • Journal of Advances in Mechanical Engineering and Science, October 2015, DJ Publications

    Dr Ravichandran Manickam

  80. Optimization of powder metallurgy parameters

    Article • Journal of Materials Research, August 2015, Cambridge University Press

    Dr Ravichandran Manickam

  81. Parametric optimization of seam welding of stainless steel (SS 304) sheets

    Article • Materials Testing, May 2015, Carl Hanser Verlag

    Dr Ravichandran Manickam

  82. Synthesis and forming characteristics of Al–TiO2 powder metallurgy composites during cold upsetting under plane stress state conditions

    Article • Journal of Sandwich Structures & Materials, January 2015, SAGE Publications

    Dr Ravichandran Manickam

  83. Workability studies on Al+2.5%TiO2+Gr powder metallurgy composites during cold upsetting

    Article • Materials Research, December 2014, FapUNIFESP (SciELO)

    Dr Ravichandran Manickam

  84. Densification and deformation studies on powder metallurgy Al–TiO2–Gr composite during cold upsetting

    Article • Journal of Materials Research, July 2014, Springer Science + Business Media

    Dr Ravichandran Manickam

  85. Effect of TiO2in aluminum matrix on workability behavior of powder metallurgy composites during cold upsetting

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), April 2014, Carl Hanser Verlag

    Dr Ravichandran Manickam

  86. Al–TiO2–Gr powder metallurgy hybrid composites with cold upset forging

    Article • Rare Metals, March 2014, Springer Science + Business Media

    Dr Ravichandran Manickam

  87. Synthesis and forming behavior of aluminium-based hybrid powder metallurgic composites

    Article • International Journal of Minerals Metallurgy and Materials, January 2014, Springer Science + Business Media

    Dr Ravichandran Manickam

  88. Experimental study on the plastic deformation and densification characteristics of some sintered and heat treated low alloy powder metallurgy steels

    Article • Materials & Design (1980-2015), January 2010, Elsevier

    Dr Ravichandran Manickam