All Stories

  1. Substrate Integrated Waveguide-Based Liquid Sensor With Self-Calibration Capability
  2. High-Efficiency Threshold-Voltage-Compensated RF Energy Harvester With Gate and Body Biasing Techniques
  3. Tunable-Efficient Spoof Surface Plasmon Polariton Phase Shifter for 5G and Beyond Applications
  4. Battery-Less Icing Detection Using a Self-Calibrated SIW Wireless Sensor
  5. A Feasibility Examination Using Microwave Stripline Resonators for Low-Temperature Sensing
  6. Enhancing Transparent Circularly Polarized Antenna Performance for Automotive Applications
  7. Energy Autonomous Dual-Band Antenna System for RFID-Based Real-Time Battery Level Monitoring
  8. Folded Narrow-Band and Wide-Band Monopole Antennas with In-Plane and Vertical Grounds for Wireless Sensor Nodes in Smart Home IoT Applications
  9. Intelligent Signal Coverage Employing Hybrid-Mode Excitation in 5G Spoof Surface Plasmon Polaritons Antennas
  10. A 0.1–20.1-GHz Wideband Noise-Canceling gm-Boosted CMOS LNA With Gain-Reuse
  11. Cost-Effective Design of a Reflectarray Antenna for 5G and Millimeter-Wave Applications Utilizing 3-D-Printed Components
  12. A Compact, Circularly-Polarized, Substrate-Integrated Waveguide, Millimeter-Wave Beamsteering System for 5G Mobile Terminals
  13. Reinforcement Learning Placement Algorithm for Optimization of UAV Network in Wireless Communication
  14. Data-driven analysis of using flow control devices and extended reach wells on SAGD well performance
  15. Compact Pixelated Microstrip Forward Broadside Coupler Using Binary Particle Swarm Optimization
  16. Temperature Compensated Dielectric Constant Sensor Using Dual-Mode Triangular Structure
  17. A Battery-Less Non-Hybrid Six-Port RFID-Based Wireless Sensor Architecture for IoT Applications
  18. Joint throughput and coverage maximization for moving users by optimum UAV positioning in the presence of underlaid D2D communications
  19. Wireless Capacitive Liquid-Level Detection Sensor Based on Zero-Power RFID-Sensing Architecture
  20. Probe-AUT Multiple Reflection Suppression in the Over the Air Measurement of 5G Antennas Using Matrix Pencil Method
  21. A Batteryless Six-Port RFID-Based Wireless Sensor Architecture for IoT Applications
  22. A Millimeter-Wave Resonant Cavity Antenna With Multibeam and High-Gain Capabilities for 5G Applications
  23. An Adaptive Data Acquisition Technique to Enhance the Speed of Near-Field Antenna Measurement
  24. Detection of Soil Moisture, Humidity, and Liquid Level Using CPW-Based Interdigital Capacitive Sensor
  25. A Millimeter-Wave Fabry–Perot Cavity Antenna With Unidirectional Beam Scanning Capability for 5G Applications
  26. Low-Profile Substrate Integrated Choke Rings for GNSS Multipath Mitigation
  27. A Batteryless RFID Sensor Architecture With Distance Ambiguity Resolution for Smart Home IoT Applications
  28. A Survey on Battery-Less RFID-Based Wireless Sensors
  29. Fixed-Frequency Low-Loss Dielectric Material Sensing Transmitter
  30. Miniaturized Antipodal Vivaldi Antenna with Improved Bandwidth Using Exponential Strip Arms
  31. Wideband High-Gain Circularly Polarized Resonant Cavity Antenna With a Thin Complementary Partially Reflective Surface
  32. A High-Gain Leaky-Wave Antenna Using Resonant Cavity Structure With Unidirectional Frequency Scanning Capability for 5G Applications
  33. Transparent Wideband Circularly Polarized GNSS Antenna for Vehicular Applications
  34. High-Resolution Dielectric Constant Measurement Using a Sensor Antenna With an Allocated Link for Data Transmission
  35. A Compact Substrate Integrated Waveguide Notched-Septum Polarizer for 5G Mobile Devices
  36. Range Extension in Partial Spherical Near-Field Measurement Using Machine Learning Algorithm
  37. Gradient and Huygens’ Metasurface Design and Analysis Based on Transmission Line Theory
  38. First-Order Correction and Equivalent Source Reconstruction Assessment for Practical Multiplane Magnetic Near-Field Measurements
  39. Resonant Cavity Antennas for 5G Communication Systems: A Review
  40. Circularly-Polarized Endfire Antenna and Arrays for 5G Millimetre-Wave Beamsteering Systems
  41. A Three-Port Zero-Power RFID Sensor Architecture for IoT Applications
  42. Dielectric-Loaded TM₀₁-TE₁₁ Mode Converters for Wideband Applications
  43. An Adaptive Data Acquisition and Clustering Technique to Enhance the Speed of Spherical Near-Field Antenna Measurements
  44. Evaluation of One-Staged 3-D Printed Frequency Selective Surface Using Carbon-Fiber-Reinforced Thermoplastic Composite
  45. Fence Shaping of Substrate Integrated Fan-Beam Electric Dipole for High-Band 5G
  46. Early detection of flood in urban catch basins using radio frequency slot line array
  47. Wideband Printed TM01 to TE11 Mode Converters
  48. Far-Field-Based Nonlinear Optimization of Millimeter-Wave Active Antenna for 5G Services
  49. Pattern Reconfigurable Cubic Slot Antenna
  50. Detection of the Defective Vias in SIW Circuits From Single/Array Probe(s) Data Using Source Reconstruction Method and Machine Learning
  51. A ZERO-Power Sensor Using Multi-Port Direct-Conversion Sensing
  52. Sensor Antenna Transmitter System for Material Detection in Wireless-Sensor-Node Applications
  53. Dual-Band Open-Ended Waveguide Feeder Antennas With Collinear Feed Design
  54. Investigation of the 3D Printing Roughness Effect on the Performance of a Dielectric Rod Antenna
  55. An Unpowered Sensor Node for Real-Time Water Quality Assessment (Humic Acid Detection)
  56. Wideband and Ultrawideband Phase Shifter Designs Based on Low-Pass/Bandpass/High-Pass Networks
  57. A High-Gain Planar Surface Plasmon Wave Antenna Based on Substrate Integrated Waveguide Technology With Size Reduction
  58. Investigation on electrical and mechanical properties of 3D printed nylon 6 for RF/microwave electronics applications
  59. Numerical and Experimental Assessment of Source Reconstruction for Very Near-Field Measurements With an Array of $H$ -Field Probes
  60. RWG MoM-via-locally corrected Nyström method in near-field to far-field transformation using very-near-field measurement
  61. High-Resolution Dielectric Sensor Based on Injection-Locked Oscillators
  62. Investigation of Wideband Substrate-Integrated Vertically-Polarized Electric Dipole Antenna and Arrays for mm-Wave 5G Mobile Devices
  63. Investigation of Epidermal Loop Antennas for Biotelemetry IoT Applications
  64. Design and Analysis of a Series-Fed Aperture-Coupled Antenna Array With Wideband and High-Efficient Characteristics
  65. Direct-Conversion Sensor for Wireless Sensing Networks
  66. A highly deformable conducting traces for printed antennas and interconnects: silver/fluoropolymer composite amalgamated by triethanolamine
  67. Large-signal distributed millimeter-wave multifinger pHEMT modeling using time-domain technique
  68. Design of wideband phase shifters with low phase error using parallel inductor and capacitor for wideband antenna applications
  69. ANN-based design of a versatile millimetre-wave slotted patch multi-antenna configuration for 5G scenarios
  70. Beam-Steering SIW Leaky-Wave Subarray with Flat-Topped Footprint for 5G Applications
  71. Investigation on Passive Booster for Improving Magnetic Coupling of Metal Mounted Proximity Range HF RFIDs
  72. Two-Layered Substrate Integrated Waveguide Filter for UWB Applications
  73. Design and implementation of a six-port junction based on substrate integrated waveguide
  74. Multilevel outphasing system using six-port modulators and doherty power amplifiers
  75. Low-Cost Inkjet Printed Passive Booster for Increasing the Magnetic Coupling in Proximity of Metal Object for NFC Systems
  76. Performance investigation of space diversity for a 28/38 GHz MIMO antenna (applicable to mm-wave mobile network)
  77. Efficiency improvement of WPT system using inexpensive auto-adaptive impedance matching
  78. Power amplifier linearisation using digital predistortion and multi-port techniques
  79. Flexible printed square loop antennas for wearable applications
  80. Low-profile dual-band corrugated SIW antenna
  81. An efficient power recycling method for multi-port receivers
  82. Low-cost miniaturized open-ended slot-based UHF RFID tag for harsh environment
  83. Wideband Two-Section Impedance Transformer With Flat Real-to-Real Impedance Matching
  84. Theoretical Design of Broadband Multisection Wilkinson Power Dividers With Arbitrary Power Split Ratio
  85. A Dual-Band Low-Profile Aperture Antenna With Substrate-Integrated Waveguide Grooves
  86. A single feed dual-band circularly polarized millimeter-wave antenna for 5G communication
  87. Dual-band circularly polarized transmit-array unit-cell at X and K bands
  88. Nonlinear distributed analysis of traveling wave amplifier in CMOS technology using FDTD method
  89. A New Aperture Antenna Using Substrate Integrated Waveguide Corrugated Structures for 5G applications
  90. High-Resolution Balanced Microwave Material Sensor with Extended Dielectric Range
  91. A novel method for data and power transmission through metallic structures
  92. A DUAL BAND E-CRLH FREQUENCY MULTIPLIER WITH TWO MULTIPLICATION FACTORS
  93. Class of miniaturised/arbitrary power division ratio couplers with improved design flexibility
  94. Accurate time-domain modeling of multi-finger pHEMT transistor based on transmission line theory
  95. Field modeling and analysis of terahertz transistor
  96. Nonlinear analysis, design and radiation study of a single-beam CORPS-like active antenna array feed network integrated with single power amplifier, using a frequency-dependent behavioral model
  97. An adaptive pre-distortion linearization technique for power amplifier using a five-port receiver
  98. Closed-Form Design of Gysel Power Divider With Only One Isolation Resistor
  99. Transmission line signal and noise modeling of millimeter wave CMOS transistor and application to LNA design
  100. High power division ratio dividers for millimeter-wave applications
  101. Compact Microstrip Wilkinson Power Dividers With Harmonic Suppression and Arbitrary Power Division Ratios
  102. Design and hybrid analysis of an integrated 60 GHz active phased array transmitter using a power amplifier and 360° phase shifter
  103. Corrections to "An ultra-broad-band reflection-type phase-shifter MMIC with series and parallel LC circuits" [Dec 01 2446-2452]
  104. Unconditionally Stable MFLTD Method for the Full Wave Electromagnetic Simulation
  105. Locally one-dimensional finite-difference time-domain scheme for the full-wave semiconductor device analysis
  106. Global modeling of nonlinear circuits using the finite-difference Laguerre time-domain/alternative direction implicit finite-difference time-domain method with stability investigation
  107. Robust Periodic Steady State Analysis of Autonomous Oscillators Based on Generalized Eigenvalues
  108. Novel five-port receiver using metamaterial transmission line for broadband systems
  109. CFS-PML Implementation for the Unconditionally Stable FDLTD Method
  110. Meshless physical simulation of semiconductor devices using a wavelet-based nodes generator
  111. Full-wave semiconductor devices simulation using meshless and finite-difference time-domain approaches
  112. Five-port microwave receiver architectures and applications
  113. LOD-FDTD method for physical simulation of semiconductor devices
  114. FULL-WAVE SEMICONDUCTOR DEVICES SIMULATION USING ADI-FDTD METHOD
  115. A meshless method for physical simulation of semiconductor devices
  116. Metamaterial-Based Phase Shifters for Ultra Wide-Band Applications
  117. Low-cost implementation of broadband microwave receivers in Ka-band using multiport structures
  118. A new wide-band Five-port receiver based on metamaterial (MTM) structures
  119. Five (Four)-Port Transceiver for Ultra-Wideband Applications
  120. FDTD analysis of distributed amplifiers based on the fully distributed model
  121. Direct Conversion EHM Transceivers Design for Millimeter-Wave Wireless Applications
  122. Five-port receiver implementation in Ka-band for software-defined radio