All Stories

  1. Polyborosiloxane‐Modified Natural Rubber With Enhanced Mechanical, Thermal, and Viscoelastic Properties
  2. Microwave‐Assisted Polyborodimethylsiloxane Synthesis: Influence of PDMS Viscosities on Viscoelastic Behavior
  3. Thermally Tunable Viscoelasticity in Polyborodimethylsiloxane: A Supramolecular Approach to Dynamic Polymer Network
  4. Effect of Molecular Weight of the Precursor Polydimethylsiloxane on the Rheology of Polyborodimethylsiloxane (PBDMS)
  5. Solvent-Assisted Synthesis of Polyborodimethylsiloxane (PBDMS) and its Rheological Research
  6. Tailoring the Properties of Polyurethane Composites: A Comprehensive Review
  7. Exploring the Impact of Nanoclay on Epoxy Nanocomposites: A Comprehensive Review
  8. Synergistic corrosion prevention of mild steel bars in concrete using PANI and nano-clay modified epoxy coatings
  9. Styrene-Butadiene-Styrene polymer modified bitumen: A review on compatibility and physico-chemical properties
  10. Utilizing synergy of MLG and MWCNT with optimized mixing protocol to improve the high temperature stability of SBS modified bitumen
  11. Enhancement in mechanical properties of GFRP‐coal‐derived graphene oxide composites by addition of multiwalled carbon nanotubes and halloysite nanotubes: A comparative study
  12. A review of the emerging approaches for developing multi‐scale filler‐reinforced epoxy nanocomposites with enhanced impact performance
  13. Enhancing the mechanical performance of E‐glass fiber epoxy composites using coal‐derived graphene oxide
  14. Advancing sustainable solutions: Harnessing polyaniline/BiOCl/GO ternary nanocomposites for solar-powered degradation of organic pollutant and photocatalytic hydrogen generation
  15. Nano-Modified Epoxy Coatings for Enhanced Corrosion Inhibition in Reinforcing Bars
  16. Synergistic effect of compatibilized nanoclay/polyethylene fibers on the impact strength of epoxy‐glass fiber nanocomposites
  17. Simplified One-Pot Synthesis of Graphene Oxide from Different Coals and its Potential Application in Enhancing the Mechanical Performance of GFRP Nanocomposites
  18. Investigations on corrosion inhibition performance of self-healing nano-clay modified epoxy coatings
  19. Reinforcement of compatibilized nanoclay/Inviya fibers to epoxy-based glass fiber nanocomposites for high-impact strength applications
  20. Water quality assessment of Banas River, eastern-south region of Rajasthan, using water quality index
  21. Experimental investigation on mechanical and microstructural behaviour of GFRP elastomeric nanocomposites
  22. Urinary levels of energy metabolism hormones in association with the proportional intake of maternal milk and weight gain in very preterm neonates
  23. Spondylocostal dysplasia and brachydactyly associated with TBX6 and IHH variants: A case report
  24. Evaluation of corrosion inhibition capability of graphene modified epoxy coatings on reinforcing bars in concrete
  25. Novel epoxy‐based glass fiber reinforced composites containing compatibilized para‐aramid fibers and silanized nanoclay for improved impact strength
  26. Design and simulations of the HEBT spiral buncher cavities for the high current injector at IUAC
  27. Efficiency of carbon nano tube (CNT) capture of blood circulating lung cancer cells
  28. Direct antiglobulin test in the prediction of hyperbilirubinemia and predischarge bilirubin levels in infants with mother-infant blood type incompatibility
  29. Intrathoracic Extrapleural Air Mimicking Pneumothorax: Secondary to Barotrauma in COVID-19
  30. Addition of compatibilized nanoclay and UHMWPE fibers to epoxy based GFRPs for improved mechanical properties
  31. Multiparametric Magnetic Resonance Imaging in Evaluation of Clinically Significant Prostate Cancer
  32. Carbon aerogel and polyaniline/carbon aerogel adsorbents for Acid Green 25 dye: synthesis, characterization and an adsorption study
  33. Addition of compatibilized nanoclay to GFRCs for improved izod impact strength and tensile properties
  34. Combining CaO–SiO2–TiO2and CaO–SiO2–Al2O3ternary phase systems for design of bimetallic welds
  35. Development, installation, and offline-beam testing of a chopping and deflecting system for the High Current Injector at IUAC
  36. Evaluation of corrosion inhibition and self healing capabilities of nanoclay and tung oil microencapsulated epoxy coatings on rebars in concrete
  37. Advancements in multi-scale filler reinforced epoxy nanocomposites for improved impact strength: A review
  38. Role of the Proportional Intake of Fortified Mother’s Own Milk in the Weight Gain Pattern of Their Very-Preterm-Born Infants
  39. Synthesis of polyaniline/clay nanocomposites by in situ polymerization and its application for the removal of Acid Green 25 dye from wastewater
  40. Spinal dysraphism, club feet, and dextrocardia with situs inversus totalis in a neonate: a rare association and review
  41. Design, development and power test of a spiral buncher RF cavity for the high current injector at IUAC
  42. A non-perturbing technique to characterize the indigenously developed spiral buncher cavity at high-power level
  43. Tensile behaviour and characterization of epoxy-clay-poly (ethylene terephthalate) nanocomposites
  44. Rheology of Fumed Silica and Polyethylene Glycol Shear Thickening Suspension with Nanoclay as an Additive
  45. Pattern of intracranial findings detected on magnetic resonance imaging in surviving infants born before 29 weeks of gestation
  46. Extended-Spectrum Beta-Lactamase-Producing Escherichia coli Meningitis and Cerebral Abscess in a Neonate: Therapeutic Challenge
  47. Mechanisms for enhanced impact strength of epoxy based nanocomposites reinforced with silicate platelets
  48. Multiple Congenital Anomalies in a Patient with Interstitial 6q26 Deletion
  49. Addition of nanomer clays to GFRPs for enhanced impact strength and fracture toughness
  50. Effect of addition of silicone oil on the rheology of fumed silica and polyethylene glycol shear thickening suspension
  51. Steady shear and dynamic strain thickening of halloysite nanotubes and fumed silica shear thickening composite
  52. Biliary Tract Abnormalities as a Cause of Distal Bowel Gas in Neonatal Duodenal Atresia
  53. Ventriculomegaly and cerebellar hypoplasia in a neonate with interstitial 11q 24 deletion in Jacobsen syndrome region
  54. Effect of molecular weight of polyethylene glycol on the rheological properties of fumed silica-polyethylene glycol shear thickening fluid
  55. Cleidocranial Dysplasia with 6p21.1-p12.3 Microdeletion
  56. Effect of mixing parameters, postcuring, and stoichiometry on mechanical properties of fiber reinforced epoxy–clay nanocomposites
  57. Effect of addition of different nano-clays on the fumed silica-polyethylene glycol based shear-thickening fluids
  58. PEEK Composite Scaffold Preparation for Load Bearing Bone Implants
  59. Pulmonary Vasculitis and a Horseshoe Kidney in Noonan Syndrome
  60. A Giant Gastroschisis Associated with Pulmonary Hypoplasia and Spinal Anomaly: A Case Report and a Literature Review
  61. Effect of Mixing Parameters on Mechanical Properties of Organoclay Epoxy Nanocomposites
  62. Multiple Peaks in Gel Permeation Chromatographs of Poly(L-lactide)
  63. Seawater ageing of glass fiber reinforced epoxy nanocomposites based on silylated clays
  64. 8p11 Microduplication Is Associated with Neonatal Stridor
  65. Congenital second-degree heart block and total anomalous pulmonary venous return associated with microduplication of 1q32.2
  66. Addition of nanoclay and compatibilized EPDM rubber for improved impact strength of epoxy glass fiber composites
  67. Evaluation of Mechanical Properties of PEEK HAp Bio-Composite Used in Load Bearing Bone Implants
  68. Compatibilization of polypropylene fibers in epoxy based GFRP/clay nanocomposites for improved impact strength
  69. Processing of polyethylene terephthalate fiber reinforcement to improve compatibility with constituents of GFRP nanocomposites
  70. Curing studies and mechanical properties of glass fiber reinforced composites based on silanized clay minerals
  71. Vessel Perforation and False Tracking Resulting From Umbilical Artery Catheterization
  72. Investigations on weld metal chemistry and mechanical behaviour of bimetallic welds using CaO–CaF2–SiO2–Ni based electrode coatings
  73. Prevalence and risk factors for vitamin D insufficiency and deficiency at birth and associated outcome
  74. Analysis of Mechanical Behaviour of Heat Affected Zone on Ferritic Side of Bimetallic Welds under Thermal Fatigue Conditions
  75. Experimental Analysis of Thermal Fatigue in Bimetallic Welds
  76. Investigations on Design and Formulation of Buttering Layer Electrode Coatings for Bimetallic Welds
  77. A comparison of modifications induced by Li3+ and Ag8+ ion beams irradiation in poly(lactide-co-glycolide) films
  78. Solvent-free cycloaddition of CO2 and propylene oxide to cyclic carbonates using different ligand metal complexes
  79. Investigation of TiO2–SiO2–CaO–CaF2 based electrode coatings on weld metal chemistry and mechanical behaviour of bimetallic welds
  80. Role of curing conditions and silanization of glass fibers on carbon nanotubes (CNTs) reinforced glass fiber epoxy composites
  81. Carbon nanotube-reinforced glass fiber epoxy composite laminates exposed to hygrothermal conditioning
  82. Non-contact damage monitoring technique for FRP laminates using guided waves
  83. Processing of Functionalized and Pristine Carbon Nanotube Epoxy Composites with Silane-Treated Glass Fiber
  84. Effect of electron density on the catalysts for copolymerization of propylene oxide and CO2
  85. Copolymerization of propylene oxide and CO2using achiral salophen Co(III) penta-florobenzoate as catalyst and tetrabutyl ammonium bromide as co-catalyst
  86. Effect of surface treatment of nanoclay on the mechanical properties of epoxy/glass fiber/clay nanocomposites
  87. Physico-chemical modification induced in PLGA/OMMT nanocomposite films by Li3+ ion beam
  88. 7q21.11 Microdeletion in a Neonate With Goldenhar Syndrome: Case Report and a Literature Review
  89. VATER/VACTERL Association and Caudal Regression with Xq25-q27.3 Microdeletion: A Case Report
  90. The effects of swift heavy ion irradiation on the structural properties of poly(lactide-co-glycolide)/clay nanocomposite
  91. Inexpensive synthesis of poly(propylene carbonate)
  92. Polylactic Acid: Synthesis
  93. Copolymerization of Propylene Oxide and Carbon Dioxide
  94. Synthesis of Conductive Polyurethane/Graphite Composites for Electromagnetic Interference Shielding
  95. Pristine and amino functionalized carbon nanotubes reinforced glass fiber epoxy composites
  96. Our experience with a severe case of aplasia cutis congenita with a large skull defect
  97. 2q31.1 microdeletion syndrome: case report and literature review
  98. Alteration in regional tissue oxygenation of preterm infants during placement in the semi-upright seating position
  99. The Effect of O6+ and Si7+ ion beam irradiations on poly(lactide-co-glycolide) (50: 50) copolymer
  100. Neonatal umbilical cord myiasis in New Jersey
  101. Silver ion beam irradiation effects on poly(lactide-co-glycolide) (PLGA)/clay nanocomposites
  102. Microwave assisted in situ ring-opening polymerization of polylactide/clay nanocomposites: Effect of clay loading
  103. Clival Encephalocele and 5q15 Deletion:
  104. Ring Opening Polymerization of Lactide in a Monomode Microwave using Stannous Octoate and Dibutyltin Dimethoxide Catalysts
  105. Is variation in total antioxidant capacity of human milk associated with levels of bio-active proteins?
  106. Polyethylene Glycol and Montmorillonite Clay Anchored Schiff Base Ligand–Metal Complexes
  107. Gastric Lavage in Vigorous Neonates Born with Meconium Stained Amniotic Fluid
  108. Vitamin D in the maternal–fetal–neonatal interface: clinical implications and requirements for supplementation
  109. Optimization studies for hybrid and storage designs for parabolic solar trough systems with the system advisor model
  110. Microwave Assisted Synthesis of Poly(lactic acid) and its Characterization using Size Exclusion Chromatography
  111. Preparation and Characterization of Polylactic Acid-Based Biodegradable Blends Processed Under Microwave Radiation
  112. Optimizing the cost and performance of parabolic trough solar plants with thermal energy storage in India
  113. Synthesis of Polylactide under Inert Atmosphere and Vacuum
  114. Does Treatment of Patent Ductus Arteriosus With Cyclooxygenase Inhibitors Affect Neonatal Regional Tissue Oxygenation?
  115. A Gelatinous Human Tail With Lipomyelocele
  116. Clay Modification by the Use of Organic Cations
  117. Glass Fiber Reinforced Polymer-Clay Nanocomposites: Processing, Structure and Hygrothermal Effects on Mechanical Properties
  118. Ring-Opening Polymerization of Lactide Using Microwave and Conventional Heating
  119. Synthesis of Polylactide: Effect of Dispersion of the Initiator
  120. Magnesium Sulfate Tocolysis and Intraventricular Hemorrhage in Very Preterm Infants
  121. Modeling Impact of Solar Radiation on Site Selection for Solar PV Power Plants In India
  122. Simultaneous removal of copper, nickel and zinc metal ions using bulk liquid membrane system
  123. Chemotherapy Significantly Increases the Risk of Radiation Pneumonitis in Radiation Therapy of Advanced Lung Cancer
  124. Very Preterm Gestation and Breastmilk Cytokine Content During the First Month of Lactation
  125. Regional tissue oxygenation in preterm born infants in association with echocardiographically significant patent ductus arteriosus
  126. Role of important parameters in ring opening polymerization of polylactide
  127. Kinetic parameters estimation of ring-opening poly(lactic acid) polymerization by modeling and simulation
  128. Biologically active breast milk proteins in association with very preterm delivery and stage of lactation
  129. Regional tissue oxygenation in association with duration of hypoxaemia and haemodynamic variability in preterm neonates
  130. Effectiveness of Exclusive Breastfeeding Promotion in Low-Income Mothers: A Randomized Controlled Study
  131. Ionized magnesium and gestational age
  132. Mathematical Modeling of the Poly(lactic acid) Ring-Opening Polymerization using Stannous Octoate as a Catalyst
  133. Maternal Race/Ethnicity and One-Month Exclusive Breastfeeding in Association with the In-Hospital Feeding Modality
  134. Mathematical Modeling of the Poly(lactic acid) Ring–Opening Polymerization Kinetics
  135. Dysfunction of innate immunity and associated pathology in neonates
  136. Thrombocytopenia related neonatal outcome in preterms
  137. Near-infrared spectroscopy in the detection of regional tissue oxygenation during hypoxic events in preterm infants undergoing critical care
  138. Intrauterine neutrophil activation is associated with pulmonary haemorrhage in preterm infants
  139. Intrapartum Magnesium Sulfate Exposure Attenuates Neutrophil Function in Preterm Neonates
  140. Synthesis of Poly(Lactic Acid): A Review
  141. Transcutaneous Bilirubinometry in Preterm Infants Receiving Phototherapy
  142. The Accuracy of Transcutaneous Bilirubin Measurements in Neonates: A Correlation Study
  143. Graphitic open-celled carbon foams: processing and characterization
  144. Cerebral Vascular Responses to Changes in Carbon Dioxide Tension in Term and Preterm Infants with Apnea
  145. Theophylline Alters Neutrophil Function in Preterm Infants
  146. Comprehensive Assessment of the Components of Energy Expenditure in Infants Using a New Infant Respiratory Chamber
  147. Characterization and analysis of defects in extruded/coagulated films of heterocyclic aromatic polymers for nonlinear optics studies
  148. Effect of Maternal Labor and Mode of Delivery on Polymorphonuclear Leukocyte Function in Healthy Neonates
  149. Synthesis, processing, and third-order nonlinear optical properties of benzobisthiazole polymers containing thiophene moieties
  150. Waveguiding in substrate supported and freestanding films of insoluble conjugated polymers
  151. In Vitro Effect of Indomethacin on Polymorphonuclear Leukocyte Function in Preterm Infants
  152. Third order non-linear optical properties of poly-p-phenylene benzobisthiazole and its novel composite with Zytel processed via methane sulphonic acid solution extrusion