All Stories

  1. Solvent-mediated solid–liquid extraction of Rubiadin dye from Mahogany wood ( Swietenia macrophylla ) and its characteristics as a natural photosensitizer for DSSC
  2. Photocatalytic Performance of Bicontinuous Concentric Lamellar Silica Decorated with Titania
  3. The effect of anti-solvent containing organofluorine molecules on the characteristics of charge carriers transport and extraction in MAPbI3 based perovskite solar cells
  4. Effect of ion migrations at the perovskite/transport layer interface on the cell performance investigated by IMVS measurements
  5. The effect of surface ligands on the surface chemical states and photoluminescence characteristics in cesium lead bromide perovskite nanocrystals
  6. Au-doped mesoporous SiO2 scattering layer enhances light harvesting in quasi Solid-State dye-sensitized solar cells
  7. Performance improvement of inverted bulk heterojunction solar cells by use of gold nanoparticles modified PEDOT: PSS as an anode buffer layer
  8. Effect of mass ratio on rGO/TiO2 composite as catalyst for methylene blue degradation under UV irradiation
  9. Crystal structures and photoluminescence characteristics of cesium lead bromide perovskite nanoplatelets depending on the antisolvent and ligand used in their syntheses
  10. Ultrasonication-modified electrochemically exfoliated graphene for counter electrode in dye-sensitized solar cells
  11. Low carrier recombination in polysiloxane gel electrolyte for high-performance DSSC
  12. Dual plasmonic modes in the visible light region in rectangular wave-shaped surface relief plasmonic gratings
  13. Modification of plasmonic properties in several transition metal-doped graphene studied by the first principles method
  14. Eco-friendly direct-current pulsed electropolymerization of polyaniline nanofibers on synthetic graphite substrate for counter electrode in dye-sensitized solar cells
  15. Improved dye-sensitized solar cell performance with hedgehog-like shaped ZnO nanorods grown using ZnO nanoparticles seed layer
  16. The influences of interfacial recombination loss on the perovskite solar cell performance studied by transient photovoltage spectroscopy
  17. IR emission of Er3+ ion-doped fluoroborotellurite glass for communication application
  18. Performance of Dye Sensitized Solar Cells (DSSCs) with ZnO Nanorod Electrode in Different Seed Solution
  19. Characteristics of Ni-Zn Rechargeable Batteries with Zn Anode Prepared by Using Nano-Cellulose as its Binder Agent
  20. Comparison of Optical Characteristics of GO-PANI Composite in Solution and Thin Film
  21. Electronic Structure of Lead-Free Halide Perovskite Material: Cs<sub>2</sub>SnI<sub>6</sub>, for Perovskite Solar Cells Applications
  22. Multilayer Reduced Graphene Oxide Deposited on Carbon Sheet as Electrodes for Supercapacitor Device
  23. Optical Characteristics of Multilayer Reduced Graphene Oxides Films Fabricated Using UV Oven Spraying Technique with Various Interval Irradiation Time
  24. Origin of Degradation in Perovskite Solar Cells by Intensity Modulated Photovoltage Spectroscopy Measurement (IMVS)
  25. Stacking Cell Model Supercapacitor Asymmetry with Multilayer Reduced Graphene Oxide Films Fabricated Using UV Oven Spraying Technique
  26. The Cell Performances of DSSCs with ZnO Nanorod Electrodes
  27. Development of Optical Material Based on Glass Doped Rare Earth for Photonic Devices
  28. Luminescence and Judd-Ofelt analysis of Nd3+ ion doped oxyfluoride boro-tellurite glass for near-infrared laser application
  29. Revealing the charge carrier kinetics in perovskite solar cells affected by mesoscopic structures and defect states from simple transient photovoltage measurements
  30. Spectroscopic study of Nd3+ ion-doped Zn-Al-Ba borate glasses for NIR emitting device applications
  31. Effect of Lead-Free Perovskite Cs<sub>2</sub>SnI<sub>6</sub> Addition in the Structure of Dye-Sensitized Solar Cell
  32. Photovoltaic Characterization of Hybrid Bulk Heterojunction Solar Cell Incorporated Gold Nanoparticles Embedded in Active Layer
  33. Rolled Supercapacitor Device Model Using Carbon-Sheet as Electrodes in KCl Electrolyte System
  34. Photostabilization of phycocyanin from Spirulina platensis modified by formaldehyde
  35. Electrocatalytic Activation of a DSSC Graphite Composite Counter Electrode Using In Situ Polymerization of Aniline in a Water/Ethanol Dispersion of Reduced Graphene Oxide
  36. Enhanced efficiency in dye-sensitized solar cell by localized surface plasmon resonance effect of gold nanoparticles
  37. The characteristics of band structures and crystal binding in all-inorganic perovskite APbBr3 studied by the first principle calculations using the Density Functional Theory (DFT) method
  38. rGO based photo-anode in dye-sensitized solar cells (DSSC) and its photovoltaic characteristics
  39. Optical and X-ray induced luminescence of Sm3+ -doped borotellurite and fluoroborotellurite glasses: A comparative study
  40. A Preliminary result on the rGO functionalization as counter-electrode in dye-sensitized solar cells (DSSC)
  41. Photocurrent enhancement by incorporation of air-stable Cs2SnI6 Perovskite in dye-sensitized solar cell
  42. The Influence of Humid Atmosphere during the MAPbI3 Perovskite Layer Preparation on the Characteristics of Its Solar Cells
  43. Understanding the role of organic cations on the electronic structure of lead iodide perovskite from their UV photoemission spectra and their electronic structures calculated by DFT method
  44. Poly(ionic-liquid) from imidazoline-functionalized siloxane prepared by simple sol-gel route for efficient quasi-solid-state DSSC
  45. Electronic Structure Calculations of Alkali Lead Iodide APbI3 (A=Li, Na, K, Rb or Cs) using Density Functional Theory (DFT) Method
  46. The effect of acetonitrile as an additive on the ionic conductivity of imidazolium-based ionic liquid electrolyte and charge-discharge capacity of its Li-ion battery
  47. Ab-initio calculation of APbI3 (A=Li, Na, K, Rb and Cs) perovskite crystal and their lattice constants optimization using density functional theory
  48. Nonlinear Finite Element Method Analysis of After Fire Reinforced Concrete Beam Strengthened with Carbon Fiber Strip
  49. Development of Eu3+ doped boro-tellurite oxyfluoride glass and their Judd-Ofelt analysis for red laser gain medium application
  50. Fabrications of Tapered Optical Fibers by Laser Induced Photopolymerization Technique
  51. Performance of Pterocarpus Indicus Willd Leaf Extract as Natural Dye TiO2-Dye/ITO DSSC
  52. The computation parameters optimizations for electronic structure calculation of LiPbl3 perovskite by the density functional theory method
  53. Comparative study on the ionic conductivities and redox properties of LiPF6 and LiTFSI electrolytes and the characteristics of their rechargeable lithium ion batteries
  54. Yellow and blue emission from BaO-(ZnO/ZnF2) B2O3TeO2 glasses doped with Dy3+ for laser medium and scintillation material applications
  55. Controlled synthesis of lead-free perovskite Cs2SnI6 as hole transport layer in dye sensitized solar cells
  56. Influences of Al dopant atoms to the structure and morphology of Al doped ZnO nanorod thin film
  57. Reduced Graphene Oxide/Polyaniline Nanocomposite as Efficient Counter Electrode for Dye Sensitized Solar Cells
  58. Ab-Initio Computations of Electronic Structures of Methylammonium Lead Bromide/Iodide Perovskites as Wide Bandgap Active Materials in Solar Cells
  59. Detection of Dye Molecules Adsorbed in a Mesoporous Layer by Surface Plasmon Resonance Spectroscopy and its Comparison with Simulation Results
  60. Fabrication of nanostructure grating polymer based coupling element for Surface Plasmon Resonance (SPR) sensors and its spectral reflectance characteristics
  61. Preparations of Organo-Lead Halide Perovskite Layers in Humid Air Atmosphere and their Characteristics
  62. Non-ohmic resistance effects of the AZO and TiZO as a blocking layer in dye-sensitized solar cells (DSSCs)
  63. Surface plasmon resonance effect of silver nanoparticles on the enhanced efficiency of inverted hybrid organic–inorganic solar cell
  64. Platinum-free, carbon-based materials as efficient counter electrodes for dye-sensitized solar cells
  65. Experimental Study of Acid Treatment Toward Characterization of Structural, Optical, and Morphological Properties of TiO2-SnO2 Composite Thin Film
  66. Efficient and Stable Photovoltaic Characteristics of Quasi-Solid State DSSC using Polymer Gel Electrolyte Based on Ionic Liquid in Organosiloxane Polymer Gels
  67. Reflectance spectra characteristics from an SPR grating fabricated by nano-imprint lithography technique for biochemical nanosensor applications
  68. Development of Sm3+ doped ZnO-Al2O3-BaO-B2O3 glasses for optical gain medium
  69. Fabrication and simulation of surface plasmon resonance (SPR)-based tapered fiber sensor for E. coli detection
  70. Glass medium doped rare earth for sensor material
  71. Optical and physical properties of MnO 2 doped soda-lime- barium-silicate glasses with industrial scales
  72. Spectroscopy properties of Er 3+ ion doped ZnO-Al 2 O 3 -BaO-B 2 O 3 glass for photonic application
  73. The physicochemical characteristic of biodegradable methylcellulose film reinforced with chicken eggshells
  74. Development of Glass for Radiation Shielding Material
  75. White Emission from Dy<inf>3+</inf> Doped Borate Glass and their Judd-Ofelt Analysis
  76. Evolution of Surface Plasmon Supermodes in Metal-Clad Microwire and Its Potential for Biosensing
  77. Revealing the limiting factors that are responsible for the working performance of quasi-solid state DSSCs using an ionic liquid and organosiloxane-based polymer gel electrolyte
  78. Self-Assembly of ZnO-Nanorods and Its Performance in Quasi Solid Dye Sensitized Solar Cells
  79. Ab-Initio Calculation of Electronic Structure of Lead Halide Perovskites with Formamidinium Cation as an Active Material for Perovskite Solar Cells
  80. Influences of Precursor Solution Concentration and Temperature on CH3NH3PbI3 Perovskite Layer Morphology and the Unconverted PbI2 Proportion to their Perovskite Solar Cell Characteristics
  81. The Temperature Effect on the Working Characteristics of Solar Cells Based on Organometal Halide Perovskite Crystals
  82. Zinc Oxide/TiO2Bilayer Heterojunction as a Working Electrode in Quasi Solid Dye Sensitized Solar Cells
  83. A simulation of surface plasmon resonance-based tapered fiber and sensing
  84. Characteristic of Thermally Reduced Graphene Oxide as Supercapacitors Electrode Materials
  85. Fabrication and Characterization of Surface Plasmon Resonance Sensor with Tapered Optical Fiber Structure
  86. Structural and optical characteristics of Eu3+ ions in sodium-lead-zinc-lithium-borate glass system
  87. Investigation on the influences of layer structure and nanoporosity of light scattering TiO2layer in DSSC
  88. Modeling and Calculation of Optical Amplification in One Dimensional Case of Laser Medium Using Finite Difference Time Domain Method
  89. The co-pigmentation of anthocyanin isolated from mangosteen pericarp (Garcinia Mangostana L.) as Natural Dye for Dye- Sensitized Solar Cells (DSSC)
  90. Structural and Optical Properties of Nd3+ Doped Na2O-PbO-ZnO-Li2O-B2O3 Glasses System
  91. Enhanced 1057 nm luminescence peak and radiative properties of laser pump Nd3+-doped sodium borate glasses
  92. Study of Interfacial Charge Transfer Loss in Hybrid Solar Cells by Impedance Spectroscopy
  93. Photovoltaic Characteristics of Inverted Bulk-Heterojunction Organic Solar Cells with Titanium Doped ZnO as their Electron Transport Layer
  94. Photovoltaic and Impedance Characteristics of Quasi Solid-State Dye-Sensitized Solar Cell Using Polymer Gel Electrolytes
  95. The Investigation of CuOx Anode Interlayer Effect in Working Performance and Charge Carrier Transport in Hybrid Solar Cells with Inverted Structure
  96. Tropical marine Chlorella sp. PP1 as a source of photosynthetic pigments for dye-sensitized solar cells
  97. Fabrication and Characterization of Zinc Oxide-Based Electrospun Nanofibers for Mechanical Energy Harvesting
  98. Charge Carrier Dynamics of Active Material Solar Cell P3HT:ZnO Nanoparticles Studied by Muon Spin Relaxation (μSR)
  99. Prelimenary Study on the Photovoltaic and Impedance Characteristics of Dye Sensitized Solar Cell (DSSC) using Polymer Gel Electrolyte
  100. The effect of ionic liquid electrolyte concentrations in dye sensitized solar cell using gel electrolyte
  101. Thermochromic effects in a Jahn–Teller active ${\mathrm{CuCl}}_{6}^{4-}$ layered hybrid system
  102. Preliminary study on the preparation of hybrid polymer gel electrolyte for lithium battery applications and its ac impedance characteristics
  103. Influences of dopant concentration in sol–gel derived AZO layer on the performance of P3HT:PCBM based inverted solar cell
  104. Effect of Solvent Used in the Preparation of Aluminum-Doped ZnO as Electron Acceptor Layer on the Characteristic of its Hybrid Solar Cell
  105. Fabrications and characterizations of dye-sensitized solar cells (DSSCs) with sol-gel derived gel electrolytes
  106. EMISSION ENHANCEMENT CHARACTERISTICS OF OXAZINE IN PMMA MATRIX INFLUENCED BY SURFACE PLASMON POLARITON INDUCED ON SINUSOIDAL SILVER GRATING
  107. Siloxane based Organic-Inorganic Hybrid Polymers and their Applications for Nanostructured Optical/Photonic Components
  108. μSR Study of Charge Carrier Diffusion in Regioregular Poly(3-Butylthiophene-2,5-Diyl)
  109. Influences of aluminum concentration to the characteristics of ZnO electron transport layer and its hybrid polymer solar cell
  110. Distributed feedback grating fabricated from hybrid polymer precursor gel by employing short-pulse laser interference for photopumped polymer laser applications
  111. FABRICATION OF DISTRIBUTED FEEDBACK GRATING FROM HYBRID POLYMER WHICH EXHIBITS PHOTO-PUMPED LASING ACTION
  112. Intra- and inter-chain polaron diffusion in regio-random polythiophene studied by muon spin relaxation
  113. Field and temperature dependent charge transport characteristics in regio-regular Poly(3-octylthiophene-2,5-diyl) studied by Muon Spin relaxation
  114. Simple Preparation of ZnO Nano-layer by Sol-Gel Method as Active Electrode in P3HT∕ZnO Heterojunction Solar Cell
  115. Determination of the Dielectric Constant and the Thickness of Gold Film by SPR Technique
  116. μSR study of electron radical dynamics in regio-regular polythiophene
  117. Time-Resolved Photoluminescence Study and Microcapillary Laser of Blue-Emissive π-Conjugated Polymers Based on 9,10-Dihydrophenanthrene Unit
  118. Optical Properties and Microcapillary Laser of Blue-Emissive π-Conjugated Polymers Based on 9,10-Dihydrophenanthrene Unit
  119. Binding of europium complex to polymerizable macrocyclic molecules and its optical properties
  120. Developing optofluidic technology through the fusion of microfluidics and optics
  121. Effects of Substrate Temperature and External Poling Field on Molecular Orientation and Aggregation in Vacuum Deposited Photo Responsive DR1 Films
  122. Time-resolved optical and electrical study of second-order processes responsible for the formation of free polarons in conjugated polymers
  123. Exciton dynamics in disubstituted polyacetylenes
  124. Spectral narrowing of photoluminescence and blue light-emitting diodes of poly(phenylene pyridine) derivatives
  125. Tunable optical properties of conducting polymers infiltrated in synthetic opal as photonic crystal
  126. Optical properties of disubstituted polyacetylene thin films
  127. Photoexcitations in disubstituted polyacetylene: solitons and polarons
  128. Optical properties of substituted phthalocyanine rare-earth metal complexes
  129. Synthesis and properties of a soluble and widely conjugated polyacetylene with anthryl pendant
  130. Metathesis Polymerization of 9-(10-Hexoxycarbonyl)anthrylacetylene. A Route to a Widely Conjugated Polyacetylene with Excellent Stability and Solubility
  131. Time-resolved study of luminescence in highly luminescent disubstituted polyacetylene and its blend with poorly luminescent monosubstituted polyacetylene
  132. Electroluminescence and photoluminescence characteristics of poly(disilanyleneoligophenylene)sandpoly(disilanyleneoligothienylene)s
  133. Photoluminescence and Electroluminescence in Polyacetylene Derivatives
  134. Excitation Dynamics in Disubstituted Polyacetylene
  135. Pl and el characteristics of mixture of polyacetylene derivatives and dynamics of excitons
  136. Microlasers and Micro-LEDs from Disubstituted Polyacetylene
  137. Optical properties and electroluminescence characteristics of polyacetylene derivatives dependent on substituent and layer structure
  138. Charge Transfer in Fullerene-Conducting Polymer Compositex: Electronic and Excitonic Properties
  139. Optical properties of disubstituted acetylene polymers
  140. Conducting polymer-fullerene D-A photocell with decreased serial resistance: ITO/PAT(C60)y/C60/Al structure