All Stories

  1. Graphene versus concentrated aqueous electrolytes: the role of the electrochemical double layer in determining the screening length of an electrolyte
  2. A reagent-free phosphate chemiresistive sensor using carbon nanotubes functionalized with crystal violet
  3. An ion-selective chemiresistive platform as demonstrated for the detection of nitrogen species in water
  4. (Invited) Chemiresistive Water Quality Sensors: Challenges and Progress
  5. Development of Solid-State Chemiresistive Devices for Simultaneous Detection of Nitrate, Nitrite and Ammonium Ions in Aqueous Solutions
  6. Nanocarbon Based Chemiresistive Detection of Monochloramine in Water
  7. Towards Understanding the Impact of Electrochemical Double Layer on the Performance of Graphene Devices
  8. Review—Solid State Sensors for Phosphate Detection in Environmental and Medical Diagnostics
  9. Graphene-silicon Schottky devices for operation in aqueous environments: Device performance and sensing application
  10. Defect Density-Dependent pH Response of Graphene Derivatives: Towards the Development of pH-Sensitive Graphene Oxide Devices
  11. Tuning the Chemical and Mechanical Properties of Conductive MoS2 Thin Films by Surface Modification with Aryl Diazonium Salts
  12. Reagent-Free Hydrogen Peroxide Sensing Using Carbon Nanotube Chemiresistors with Electropolymerized Crystal Violet
  13. Detection of free chlorine in water using graphene-like carbon based chemiresistive sensors
  14. Facile fabrication of conductive MoS2 thin films by sonication in hot water and evaluation of their electrocatalytic performance in the hydrogen evolution reaction
  15. An Electropolymerized Self Assembled Monolayer of Crystal Violet for Chemiresistive Hydrogen Peroxide Sensor
  16. Single-walled Carbon Nanotube Chemiresistive Sensors for the Identification and Quantification of Disinfectants
  17. Defect Engineering of Graphene to Modulate pH Response of Graphene Devices
  18. Impact of Surface Adsorption on Metal–Ligand Binding of Phenanthrolines
  19. Direct Exfoliation of Conductive MoS2 Using Peroxide for Solid State Sensor and Catalytic Applications
  20. Modifying Nanocarbon Films with Switchable Dopant Molecules for the Detection of Aqueous Permanganate
  21. Chemiresistive detection of silver ions in aqueous media
  22. Solid State Sensors for Hydrogen Peroxide Detection
  23. Peroxide-Induced Tuning of the Conductivity of Nanometer-Thick MoS2 Films for Solid-State Sensors
  24. Chemiresistive Detection of Silver Ions in Aqueous Media
  25. Switchable Dopants on Percolation Networks of 2D Materials for Chemiresistive Sensing Applications in Aqueous Environments
  26. Tuning the Conductivity of Molybdenum Disulfide (MoS2) Thin Films through Defect Engineering
  27. Editors’ Choice—Review—Conductive Forms of MoS2 and Their Applications in Energy Storage and Conversion
  28. Review—Two-Dimensional Boron Carbon Nitride: A Comprehensive Review
  29. Review—Graphene-Based Water Quality Sensors
  30. Metal Cation Detection in Drinking Water
  31. Hydrogen peroxide chemiresistive detection platform with wide range of detection
  32. Chemical in situ modulation of doping interactions between oligoanilines and nanocarbon films
  33. Retraction of “Robust Chemiresistive Sensor for Continuous Monitoring of Free Chlorine using Graphene-Like Carbon”
  34. Review on water quality sensors
  35. Chemical sensors based on surface charge transfer
  36. Robust Chemiresistive Sensor for Continuous Monitoring of Free Chlorine Using Graphene-like Carbon
  37. Surface Mobility and Nucleation of a Molecular Switch: Tetraaniline on Hematite
  38. Pencil-Drawn Chemiresistive Sensor for Free Chlorine in Water
  39. Reagent-Free Quantification of Aqueous Free Chlorine via Electrical Readout of Colorimetrically Functionalized Pencil Lines
  40. Nature of the Interaction of N,N′-Diphenyl-1,4-phenylenediamine with Iron Oxide Surfaces
  41. Nature of the Interaction of N,N′-Diphenyl-1,4-benzoquinonediimine with Iron Oxide Surfaces and Its Mobility on the Same Surfaces
  42. Interactions of Different Redox States of Phenyl-Capped Aniline Tetramers with Iron Oxide Surfaces and Consequences for Corrosion Inhibition
  43. Interfacial Charge Transfer between Phenyl-Capped Aniline Tetramer Films and Iron Oxide Surfaces
  44. Ultrathin Gas Permeable Oxide Membranes for Chemical Sensing: Nanoporous Ta2O5 Test Study
  45. A carbon nanotube based resettable sensor for measuring free chlorine in drinking water
  46. Note: Benign and reproducible preparation of titanium tips
  47. Note: Electrochemical etching of silver tips in concentrated sulfuric acid
  48. Sponge-Like Porous Metal Surfaces from Anodization in Very Concentrated Acids
  49. Ordered nano-scale dimple pattern formation on a titanium alloy (Ti-6Al-4V)
  50. Cause and Consequence of Carbon Nanotube Doping in Water and Aqueous Media
  51. Ambiguity in the Characterization of Chemically Modified Single-Walled Carbon Nanotubes: A Raman and Ultraviolet−Visible−Near-Infrared Study
  52. The effect of GaAs(100) surface preparation on the growth of nanowires
  53. Nanopatterning of Transition Metal Surfaces via Electrochemical Dimple Array Formation
  54. Investigation of Corrosion-Inhibiting Aniline Oligomer Thin Films on Iron Using Photoelectron Spectroscopy
  55. Universal Method for the Fabrication of Detachable Ultrathin Films of Several Transition Metal Oxides
  56. To Dope or Not To Dope: The Effect of Sonicating Single-Wall Carbon Nanotubes in Common Laboratory Solvents on Their Electronic Structure
  57. Roughening of Gold Atomic Steps Induced by Interaction with Tetrahydrofuran
  58. Carbon nanotube surface science
  59. Selective electroplating of copper lines on pre-patterned tantalum oxide thin films
  60. Robust Inorganic Membranes from Detachable Ultrathin Tantalum Oxide Films
  61. The role of proximity caps during the annealing of UV-ozone oxidized GaAs
  62. X-ray photoelectron spectroscopic study of the formation of catalytic gold nanoparticles on ultraviolet-ozone oxidized GaAs(100) substrates
  63. Recrystallization of tungsten wire for fabrication of sharp and stable nanoprobe and field-emitter tips
  64. Formation of Dimpled Tantalum Surfaces from Electropolishing
  65. The formation of supported monodisperse Au nanoparticles by UV/ozone oxidation process
  66. Formation of Highly Ordered Arrays of Dimples on Tantalum at the Nanoscale
  67. Dispersion Interactions Enable the Self-Directed Growth of Linear Alkane Nanostructures Covalently Bound to Silicon
  68. Long-Range Periodicity in Carbon Nanotube Sidewall Functionalization
  69. Polymer-Functionalized Carbon Nanotubes Investigated by Solid-State Nuclear Magnetic Resonance and Scanning Tunneling Microscopy
  70. “Gentle lithography” with benzene on Si(100)
  71. Adsorption of atomic oxygen on GaAs(001)-(2×4) and the resulting surface structures
  72. Chemically selective adsorption of molecular oxygen on GaAs(100)c(2×8)
  73. Relative reactivity of arsenic and gallium dimers and backbonds during the adsorption of molecular oxygen on GaAs(100)(6×6)
  74. Anomalous Mobility of Strongly Bound Surface Species: Cl onGaAs(001)−
  75. Localized excess negative charges in surface states of the clean Ga-rich GaAs(100)c(8×2)/4×2 reconstruction as imaged by scanning tunneling microscopy
  76. Atomic structure determination for GaAs(001)-(6×6) by STM