All Stories

  1. Influence of Mo and Ni Alloying on Recrystallization Kinetics and Phase Transformation in Quenched and Tempered Thick Steel Plates

    Article • Materials, January 2026, MDPI AG

    Dr Pello Uranga

  2. Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra‐Heavy Gage

    Article • steel research international, October 2025, Wiley

    Dr Pello Uranga

  3. Production of a Non-Stoichiometric Nb-Ti HSLA Steel by Thermomechanical Processing on a Steckel Mill

    Article • Metals, February 2023, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  4. Effect of Dynamic Recrystallization on Microstructural Evolution in B Steels Microalloyed with Nb and/or Mo

    Article • Materials, February 2022, MDPI AG

    Dr Pello Uranga

  5. Effect of Quenching Strategy and Nb-Mo Additions on Phase Transformations and Quenchability of High-Strength Boron Steels

    Article • JOM, July 2021, Springer Science + Business Media

    Dr Pello Uranga

  6. Analysis of Strain Partitioning in Intercritically Deformed Microstructures via Interrupted Tensile Tests

    Article • Metals, January 2021, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  7. Toughness Property Control by Nb and Mo Additions in High-Strength Quenched and Tempered Boron Steels

    Article • Metals, January 2021, MDPI AG

    Dr Pello Uranga

  8. Effect of Nb and Mo Additions in the Microstructure/Tensile Property Relationship in High Strength Quenched and Quenched and Tempered Boron Steels

    Article • Metals, December 2020, MDPI AG

    Dr Pello Uranga

  9. Thermomechanical Processing of Steels

    Article • Metals, May 2020, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  10. Interaction between Microalloying Additions and Phase Transformation during Intercritical Deformation in Low Carbon Steels

    Article • Metals, September 2019, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  11. Computer-Integrated Platform for Automatic, Flexible, and Optimal Multivariable Design of a Hot Strip Rolling Technology Using Advanced Multiphase Steels

    Article • Metals, June 2019, MDPI AG

    Dr Pello Uranga

  12. Advances in Microalloyed Steels

    Article • Metals, February 2019, MDPI AG

    Dr Pello Uranga

  13. An EBSD-based methodology for the characterization of intercritically deformed low carbon steel

    Article • Materials Characterization, January 2019, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  14. Microalloying Additions to Commodity C-Mn Structural Steels: Fundamental Strengthening Mechanisms Leading to Improvements in Mechanical Properties, Alloy Optimization, Reduced Alloy Costs and Robustness of Hot Rolling Processing

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Professor Jose M. Rodriguez-Ibabe, Dr Pello Uranga

  15. Effect of Microstructure on Post-Rolling Induction Treatment in a Low C Ti-Mo Microalloyed Steel

    Article • Metals, September 2018, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  16. Evaluating Strengthening and Impact Toughness Mechanisms for Ferritic and Bainitic Microstructures in Nb, Nb-Mo and Ti-Mo Microalloyed Steels

    Article • Metals, February 2017, MDPI AG

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  17. Analysis of Complex Steel Microstructures by High-Resolution EBSD

    Article • JOM, October 2015, Springer Science + Business Media

    Dr Pello Uranga

  18. Modeling of CCT Diagrams and Ferrite Grain Size Prediction in Low Carbon Nb–Mo Microalloyed Steels

    Article • ISIJ International, January 2015, Iron and Steel Institute of Japan

    Dr Pello Uranga

  19. Microstructural and precipitation characterization in Nb-Mo microalloyed steels: Estimation of the contributions to the strength

    Article • Metals and Materials International, September 2014, Springer Science + Business Media

    Dr Pello Uranga

  20. Microstructural Features Controlling Mechanical Properties in Nb-Mo Microalloyed Steels. Part II: Impact Toughness

    Article • Metallurgical and Materials Transactions A, July 2014, Springer Science + Business Media

    Dr Pello Uranga

  21. Microstructural Features Controlling Mechanical Properties in Nb-Mo Microalloyed Steels. Part I: Yield Strength

    Article • Metallurgical and Materials Transactions A, July 2014, Springer Science + Business Media

    Dr Pello Uranga

  22. Determination of recrystallization kinetics from plane strain compression tests

    Article • Materials Science and Engineering A, August 2013, Elsevier

    Dr Pello Uranga

  23. Phase Transformation Study in Nb-Mo Microalloyed Steels Using Dilatometry and EBSD Quantification

    Article • Metallurgical and Materials Transactions A, April 2013, Springer Science + Business Media

    Dr Pello Uranga

  24. Some Aspects Regarding Microstructural Heterogeneities during Steel Processing

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  25. New Trends and Technologies in Thin-Slab Direct Rolling: Improved Microstructure & Mechanical Behavior

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  26. Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb–V microalloyed steel

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  27. Effect of Composition and Deformation on Coarse-Grained Austenite Transformation in Nb-Mo Microalloyed Steels

    Article • Metallurgical and Materials Transactions A, February 2011, Springer Science + Business Media

    Dr Pello Uranga

  28. Effect of Coiling Temperature on Microstructure and Mechanical Properties of a Nb-V Microalloyed Steel

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  29. Microalloying and austenite evolution during hot working in near net shape processed steels

    Article • Materials Science and Technology, September 2009, Taylor & Francis

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  30. Direct Observation of the Effects of Alloying Additions on Transformation Mechanisms in Emerging Steel Alloys with In-Situ TEM

    Article • Microscopy and Microanalysis, July 2009, Cambridge University Press

    Dr Pello Uranga

  31. Role of carbon and nitrogen content on microstructural homogeneity in thin slab direct rolled microalloyed steels

    Article • Ironmaking & Steelmaking Processes Products and Applications, April 2009, Taylor & Francis

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  32. Controlled Undercooling of Liquid Nickel in Contact with ZrO2 and Al2O3 Substrates under Varying Oxygen Partial Pressures

    Article • Metallurgical and Materials Transactions B, April 2007, Springer Science + Business Media

    Dr Pello Uranga

  33. Microstructural Modelling of Nb Microalloyed Steels during Thin Slab Direct Rolling Processing

    Article • steel research international, March 2007, Wiley

    Professor Jose M. Rodriguez-Ibabe, Dr Pello Uranga

  34. Controlled undercooling of liquid iron in contact with Al2O3 substrates under varying oxygen partial pressures

    Article • Metallurgical and Materials Transactions B, October 2006, Springer Science + Business Media

    Dr Pello Uranga

  35. Optimization of Rolling Conditions in Nb Microalloyed Steel Processed by Thin Slab Casting and Direct Rolling Route: Processing Maps

    Article • November 2005, CrossRef Test Account

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  36. Optimization of Rolling Conditions in Nb Microalloyed Steel Processed by Thin Slab Casting and Direct Rolling Route: Processing Maps

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  37. Modeling of Austenite Grain Size Distribution in Nb Microalloyed Steels Processed by Thin Slab Casting and Direct Rolling (TSDR) Route

    Article • ISIJ International, January 2004, Iron and Steel Institute of Japan

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  38. Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb–Ti microalloyed steels

    Article • Materials Science and Engineering A, November 2003, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  39. Austenite Evolution Modeling in Nb Microalloyed Steels during Thin Slab Direct Rolling

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  40. Transition between static and metadynamic recrystallization kinetics in coarse Nb microalloyed austenite

    Article • Materials Science and Engineering A, March 2003, Elsevier

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe

  41. Static Recrystallization Behaviour of a Wide Range of Austenite Grain Sizes in Microalloyed Steels.

    Article • ISIJ International, January 2000, Iron and Steel Institute of Japan

    Dr Pello Uranga, Professor Jose M. Rodriguez-Ibabe