All Stories

  1. Artificial intelligence for radiographic assessment and severity grading of peri-implant marginal bone loss: A systematic review and methodological appraisal
  2. Effect of a stackable scanning guide, intraoral scanner type, and operator on the accuracy of maxillary full-arch implant scans: An in vitro study
  3. Effect of polymerization unit and support bar design on the trueness and fit of additively manufactured implant-supported complete-arch fixed frameworks: An in vitro study
  4. Are there differences in the optical properties of subtractively and additively manufactured zirconia restorations? A systematic review and meta-analysis
  5. Centric Relation: Science, Myth or Clinical Convenience?
  6. Minimal‐Burden Prosthodontics: Simple Care and Comprehensive Risk Assessment in Older Adults
  7. Supplementary Use of an Intraoral Scanner in an Older Patient With Microstomia After Maxillary Cancer Resection
  8. Load-bearing capacity of screw-retained zirconia crown-abutment complexes of different heights fabricated by additive and subtractive methods after cyclic loading: An in vitro study
  9. Artificial intelligence in radiographic quantification and severity assessment of peri‐implant marginal bone loss: A systematic review
  10. Effects of prosthetic screw modifications and tightening conditions on mechanical outcomes in screw-retained implant restorations: A systematic review and meta-analysis of in vitro studies
  11. Effect of abutment screw channel angle and crown height on the screw stability of posterior monolithic zirconia crowns supported by tissue-level implants: An in vitro study
  12. Effect of build orientation, sintering schedule, and resin cement on the bond strength of additively manufactured zirconia to dentin
  13. Influence of postprocessing cleaning solution on the margin quality, fabrication trueness, and intaglio fit of additively manufactured definitive resin-based crowns
  14. Correlation and agreement among outcome measures in implant impression-making research: A validation study
  15. Dimensional accuracy and internal fit of anterior 3-unit fixed dental prostheses fabricated by additive and subtractive manufacturing using polymer-based and ceramic restorative materials
  16. Internal fit of cobalt–chromium and zirconia implant abutments fabricated using different techniques: A micro–computed tomography study
  17. Mesh quality comparison of common three file formats derived from intraoral scans
  18. Staging in Gerodontology: A Framework
  19. Titanium Base-Free Multi-Unit Abutment Connections: A Critical Review of Prosthetic Screw Design, Biomechanical Behavior, and Clinical Performance
  20. Functional Outcomes of Prosthetic Rehabilitation in Older Adults With Tooth Loss: A Systematic Review and Meta‐Analysis
  21. Grading in Gerodontology: A Framework
  22. Surface properties and biofilm formation of a manufacturer‐reinforced, nanographene‐modified pre‐polymerized CAD‐CAM polymethylmethacrylate denture base material: An in vitro study
  23. Implant Overdentures in the Digital Era
  24. The effect of mechanical and chemical surface pretreatment on the repair bond strength of resins used in additive or subtractive manufacturing of definitive prostheses
  25. Effectiveness of Custom-Made Mouthpieces in the Prevention of Diver's Mouth Syndrome (DMS)
  26. Does the use of intermediate abutments impact screw-retained implant-supported fixed partial prostheses outcomes? A systematic review and meta-analysis of randomized controlled trials
  27. Flexural and structural behavior of additively manufactured zirconia: Influence of firing process and build orientation
  28. Oral rehabilitation using a sectional maxillary complete denture and mandibular removable partial denture for a patient with microstomia: A clinical report
  29. Additively manufactured water‐washable resin dies cleaned with nonhazardous solutions: Can dimensional and positional trueness be ensured?
  30. Association between Periodontal Status and Prognosis in Men with Prostatitis: A Cross-Sectional Clinical Study
  31. Validation of different indices for the assessment of single tooth-supported prostheses in the esthetic zone: A feasibility clinical study
  32. Evaluation of dynamic computer-assisted implant placement accuracy by means of a novel digital method: A feasibility clinical study
  33. Effects of hydrothermal aging on surface properties and biofilm formation of CAD-CAM materials used for complete arch implant-supported prostheses: An in vitro study
  34. Do resin-modified 3D-printed complete dentures show improved mechanical, physical, surface, and biological properties? A systematic review and meta-analysis
  35. Content evaluation of YouTube videos on immediate placement and loading of implant-supported complete arch prostheses: A quality assessment
  36. Performance of polyetheretherketone (PEEK) versus cobalt chromium to fabricate removable partial denture frameworks: A systematic review
  37. Application of local melatonin for controlling peri-implantitis: a randomized clinical trial
  38. Clinical and Radiographic Evaluation of Zirconia Bars for Mandibular Implant Overdentures: A Prospective Cohort Study With up to 3 Years of Follow‐Up
  39. Association between oral health-related quality of life and structural determinants of health among elderly populations. a systematic review and meta-analysis
  40. Implant Survival in Patient Populations With a Mean Age of 65–75 Years Compared to Older Cohorts: A Systematic Review and Meta‐Analysis
  41. An alternative approach to code, store, and regenerate 3D data in dental medicine using open-source software: A scripting-based technique
  42. Comparative Influence of Marginal Design and Digital Scanning Accuracy on the Clinical Longevity of Ceramic Restorations: An Evidence‐Based Approach. Consensus Statement From SSRD, SEPES, and PROSEC Conference on Minima...
  43. Prospective clinical-radiological study of the survival and behavior of short implants
  44. Masticatory Performance Within a Representative Swiss Cohort: A Cross‐Sectional Study
  45. Feasibility, trueness and precision of intraoral scanners in digitizing maxillectomy defects with exposed zygomatic implants in situ: An in vitro 3D comparative study
  46. Impact of scanning interruptions on accuracy of implant-supported full-arch scans: An in-vitro pilot study
  47. Oral health-related quality of life of community-dwellers in the canton of Bern, Switzerland
  48. Scan accuracy of wireless intraoral scanners while digitizing a combined scan body-healing abutment system
  49. Esthetic and Functional Posterior Rehabilitation With Lithium Disilicate Ceramics for the Replacement of Gold Alloy and Metal‐Ceramic Restorations: A Clinical Case With a 10‐Year Follow‐Up
  50. Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review
  51. Distortion Assessment of Different Materials in Full-Arch Dentate Impressions in Relation to Operator Experience: A Comparative In Vivo Study
  52. Impact of the superimposition methods on accuracy analyses in complete-arch digital implant investigation
  53. Fracture resistance of additively or subtractively manufactured resin-based definitive crowns: Effect of restorative material, resin cement, and cyclic loading
  54. Management of Compromised Spacing in the Esthetic Zone by Combining an Ultra-Thin Partial Ceramic Veneer and a Ceramic Implant Crown: A Case Report of a Multidisciplinary Approach and Technique Description
  55. Digital workflow feasibility for the fabrication of intraoral maxillofacial prosthetics after surgical resection: a systematic literature review
  56. Impact of the superimposition methods and the designated comparison area on accuracy analyses in dentate models
  57. Clinical and radiographic performance of late placed and early loaded dental implants with a conditioned hydrophilic surface in posterior mandible sites: A prospective case series with an 8.5‐ to 9.5‐year follow‐up
  58. Validation of the pink esthetic score/white esthetic score at single tooth‐supported prostheses in the esthetic zone: A randomized clinical trial
  59. Load bearing capacity of 3-unit screw-retained implant-supported fixed dental prostheses with a mesial and distal cantilever on a single implant: A comparative in vitro study
  60. Complete Digital Workflow for Fabricating an Occlusal Device Using Artificial Intelligence– Powered Design Software and Additive Manufacturing: A Dental Method
  61. Manufacturing Accuracy, Intaglio Surface Adaptation, and Survival of Additively and Subtractively Manufactured Definitive Resin Crowns After Cyclic Loading: An In Vitro Study
  62. Effect of coffee thermal cycling on the surface properties and stainability of additively manufactured denture base resins in different layer thicknesses
  63. Effect of triangular mesh resolution on the geometrical trueness of segmented CBCT maxillofacial data into STL format
  64. Accuracy of Intraoral Scanner for Recording Completely Edentulous Arches—A Systematic Review
  65. Assessment of pH Value and Release of Calcium Ions in Calcium Silicate Cements: An In Vitro Comparative Study
  66. Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Auricular Prostheses—Systematic Review
  67. Clinical performance of immediately placed and immediately loaded single implants in the esthetic zone: A systematic review and meta‐analysis
  68. Group 5 ITI Consensus Report: Implant placement and loading protocols
  69. Tactile misfit detection ability at the implant-abutment interface of internal connection dental implants: an in-vitro study
  70. Assessment and Improvement of Masticatory Performance in Frail Older People: A Narrative Review
  71. Dental status and its correlation with polypharmacy and multimorbidity in a Swiss nursing home population: a cross-sectional study
  72. Effect of Cumulative Ionizing Radiation on Flexural Strength, Flexural Modulus, and Elasticity Modulus of Dentin in Unerupted Human Third Molars
  73. Effect of the buccal fat pad in the prevention of zygomatic implant surgery postoperative complications: A pilot study
  74. Load Bearing Capacity of 3-Unit Implant-Supported FDPs as a Function of Number of Implants, Design, Abutment System and Prosthetic Configuration: Is a Configuration with a Mesial and Distal Cantilever on a Single Implant a Valid Treatment Option?
  75. Global prevalence of edentulism and dental caries in middle-aged and elderly persons: A systematic review and meta-analysis
  76. Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report
  77. Surface Roughness and Color Stability of 3D-Printed Denture Base Materials after Simulated Brushing and Thermocycling
  78. Indirect repair of saliva‐contaminated materials using veneering ceramics
  79. Microleakage assessment of CAD‐CAM Cobalt‐Chrome and Zirconia abutments on a conical connection dental implant: A comparative in vitro study
  80. Clinical performance of tooth implant–supported removable partial dentures: a systematic review and meta-analysis
  81. Triangular mesh reduction of digitized maxillectomy defects for prosthetic rehabilitation: A 3D deviation study
  82. Feasibility and accuracy of using intraoral scanners to digitize maxillectomy defects for prosthetic rehabilitation: A systematic review
  83. The influence of age and gender on perception of orofacial esthetics among laypersons in Switzerland
  84. Influence of 2% Chlorhexidine on the Bond Strength of Three Adhesive Systems on Primary Molars: An In Vitro Study
  85. Patient-reported outcomes in patients with severe maxillary bone atrophy restored with zygomatic implant-supported complete dental prostheses: a systematic review
  86. Burnout syndrome assessment among Spanish oral surgery consultants: A two populations comparative pilot study
  87. Re: Dental implant placement through impacted teeth or residual roots as an alternative to invasive extraction surgeries: a systematic literature review
  88. Hyaluronic acid injection to restore the lost interproximal papilla: a systematic review
  89. Dental implant placement through impacted teeth or residual roots as an alternative to invasive extraction surgeries: a systematic literature review
  90. Systematic Review of Clinical Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Orbital Prostheses
  91. Periodontal Disease and Vitamin D Deficiency in Pregnant Women: Which Correlation with Preterm and Low-Weight Birth?
  92. Dental students’ preference and perception on intraoral scanning and impression making
  93. Micro Push-Out Bond Strength of Resin Composite to Dentin in Primary Dentition Using Three Universal Adhesives with Different pH: An In Vitro Study
  94. Dental Students’ Preference and Perception on Intraoral Scanning and Impression Making
  95. Ectopic Eruption of Upper First Molars: Early Results on Prevalence in Spanish Children
  96. Clinical performance of alveolar ridge augmentation with xenogeneic bone block grafts versus autogenous bone block grafts. A systematic review
  97. Clinical performance of implant crowns with customized zirconia abutments: A prospective cohort study with a 4.5‐ to 8.8‐year follow‐up
  98. Single-visit chairside adjustment of a metal-acrylic resin implant-supported fixed complete dental prosthesis on an unloaded implant using a novel fixed attachment system: a case report
  99. Effect of Fabrication Technique on the Microgap of CAD/CAM Cobalt–Chrome and Zirconia Abutments on a Conical Connection Implant: An In Vitro Study
  100. Type I Collagen-Based Devices to Treat Nerve Injuries after Oral Surgery Procedures. A Systematic Review
  101. Clinical Behavior and Complications of Mandibular Full-Arch Fixed Dental Prostheses Supported by Three Dental Implants. A Systematic Review and Meta-Analysis
  102. Systematic Review of Clinical Applications of CAD/CAM Technology for Craniofacial Implants Placement and Manufacturing of Nasal Prostheses
  103. Biocompatibility and Effectiveness of a Novel, Organic Olive Oil-Based Denture Adhesive: A Multicenter Randomized and Placebo-Controlled Clinical Trial
  104. Biocompatibility and Effectiveness of a Novel Organic Olive Oil-Based Denture Adhesive: A Multicenter Randomized and Placebo-Controlled Clinical Trial
  105. An Intraoral Repair Method for Chipping Fracture of a Multi-unit Fixed Zirconia Reconstruction: A Direct Dental Technique
  106. Effectiveness of the bone ring technique and simultaneous implant placement for vertical ridge augmentation: a systematic review
  107. Placing Dental Implants through Impacted Teeth to Support a Fixed Partial Denture in a Geriatric Patient as an Alternative to Invasive Extraction Surgeries
  108. Preliminary Study on the Assessment of the Marginal Fit of Three-Dimensional Methacrylate Oligomer Phosphine Oxide Provisional Fixed Dental Prostheses Made by Digital Light Processing
  109. Comparative In Vitro Study of the Bond Strength of Composite to Carbon Fiber Versus Ceramic to Cobalt–Chromium Alloys Frameworks for Fixed Dental Prostheses
  110. Multi-purpose Use of Nasal Stents for Prosthetic Rehabilitation of Facial Defect: A Case Report
  111. Clinical Performance of Partial and Full-Coverage Fixed Dental Restorations Fabricated from Hybrid Polymer and Ceramic CAD/CAM Materials: A Systematic Review and Meta-Analysis
  112. Treatment Outcomes of Implant-Supported Maxillary Obturator Prostheses in Patients with Maxillary Defects: A Systematic Review
  113. Zirconia-ceramic versus metal-ceramic posterior multiunit tooth-supported fixed dental prostheses
  114. Medication-related osteonecrosis of the jaws (MRONJ) in cancer patients treated with denosumab VS. zoledronic acid: A systematic review and meta-analysis
  115. Assessment of clinical outcomes and histomorphometric findings in alveolar ridge augmentation procedures with allogeneic bone block grafts: A systematic review and meta-analysis
  116. Efficacy of a topical gel containing chitosan, chlorhexidine, allantoin and dexpanthenol for pain and inflammation control after third molar surgery: A randomized and placebo-controlled clinical trial
  117. Photogrammetric and Intraoral Digital Impression Technique for the Rehabilitation of Multiple Unfavorably Positioned Dental Implants: A Clinical Report
  118. Improving PMMA resin using graphene oxide for a definitive prosthodontic rehabilitation - A clinical report
  119. Photogrammetry Technique for the 3D Digital Impression of Multiple Dental Implants
  120. Tratamiento del tumor odontogénico queratoquístico: revisión sistemática
  121. Polylactic Acid as a Material for Three-Dimensional Printing of Provisional Restorations
  122. Influence of short implants geometry on primary stability
  123. Sinusitis maxilar en implantes cigomáticos: revisión sistemática
  124. Effect of the lack of primary stability in the survival of dental implants
  125. Dental management in patients with antiplatelet therapy: A systematic review
  126. Surgical complications in zygomatic implants: A systematic review