All Stories

  1. A Method for Assessing the Performance of Breaking Hammers Based on Acoustic Signal and Video Analysis

    Article • Applied Sciences, September 2025, MDPI AG

    Dr Pavel V. Krot

  2. A New Method of Airflow Velocity Measurement by UAV Flight Parameters Analysis for Underground Mine Ventilation

    Article • Sensors, August 2025, MDPI AG

    Dr Pavel V. Krot

  3. Influence of the Imbalanced Rotor and Supporting Surface Inclination Angles on the Locomotion Characteristics of a Vibration-Driven System

    Article • January 2025, Springer Science + Business Media

    Dr Pavel V. Krot

  4. Development of a versatile method for predicting the density of monocomponent dry fine materials compacts based on comparative study of compression factors

    Article • Powder Technology, September 2024, Elsevier

    Dr Pavel V. Krot

  5. NOx Emission Prediction of Diesel Vehicles in Deep Underground Mines Using Ensemble Methods

    Article • Electronics, March 2024, MDPI AG

    Dr Pavel V. Krot

  6. Analyzing the Locomotion Conditions of a Wheeled Vibration-Driven System with a V-Shaped Suspension

    Article • January 2024, Springer Science + Business Media

    Dr Pavel V. Krot

  7. Condition Monitoring of Vibrating Sieving Screens—Design, Dynamics and Diagnostics

    Article • January 2024, Springer Science + Business Media

    Dr Pavel V. Krot

  8. Development of the universal method for predicting the density of briquettes from dry fine-fractional materials based on the results of a comparative study of compression factors

    Article • Fundamental and applied problems of ferrous metallurgy, January 2024, Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine

    Dr Pavel V. Krot

  9. Statistical Analysis of Peak Torque in Drivelines of Mining and Metallurgical Machines for Clearances Diagnostics

    Article • January 2024, Springer Science + Business Media

    Dr Pavel V. Krot

  10. System for automatic front ends control of thick plates by asymmetric hot rolling

    Article • Fundamental and applied problems of ferrous metallurgy, January 2024, Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine

    Dr Pavel V. Krot

  11. Estimating volume of oversized copper ore chunks in an underground mine using a laser scanner and an RGB camera for hammering efficiency assessment

    Article • International Journal of Mining Reclamation and Environment, December 2023, Taylor & Francis

    Dr Pavel V. Krot

  12. Forecasting of NOx Emissions of Diesel LHD Vehicles in Underground Mines—An ANN-Based Regression Approach

    Article • Applied Sciences, September 2023, MDPI AG

    Dr Pavel V. Krot

  13. Diagnostics of Bolted Joints in Vibrating Screens Based on a Multi-Body Dynamical Model

    Article • Materials, August 2023, MDPI AG

    Dr Pavel V. Krot

  14. Increasing the Wear Resistance of Structural Alloy Steel 38CrNi3MoV Subjected to Isothermal Hardening and Deep Cryogenic Treatment

    Article • Applied Sciences, August 2023, MDPI AG

    Dr Pavel V. Krot

  15. A Novel Approach to the Screw Feeder Design to Improve the Reliability of Briquetting Process in the Roller Press

    Article • Eksploatacja i Niezawodnosc - Maintenance and Reliability, June 2023, Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

    Dr Pavel V. Krot

  16. Data optimization for the knowledge bases in the oil and gas Monitoring-While-Drilling (MWD) Systems

    Article • IOP Conference Series Earth and Environmental Science, May 2023, Institute of Physics Publishing

    Dr Pavel V. Krot

  17. On Shadowing Effects in the Flow around the Group of Circular Cylinders in the Geotechnical Applications

    Article • IOP Conference Series Earth and Environmental Science, May 2023, Institute of Physics Publishing

    Dr Pavel V. Krot

  18. Prospects of in-belt IMU sensors application for fault detection in mining conveyors

    Article • IOP Conference Series Earth and Environmental Science, May 2023, Institute of Physics Publishing

    Dr Pavel V. Krot

  19. Rotation speed assessment for idlers in belt conveyors using image analysis

    Article • IOP Conference Series Earth and Environmental Science, May 2023, Institute of Physics Publishing

    Dr Pavel V. Krot

  20. Prediction of NOx Emission Based on Data of LHD On-Board Monitoring System in a Deep Underground Mine

    Article • Energies, February 2023, MDPI AG

    Dr Pavel V. Krot

  21. Condition Monitoring of Horizontal Sieving Screens—A Case Study of Inertial Vibrator Bearing Failure in Calcium Carbonate Production Plant

    Article • Materials, February 2023, MDPI AG

    Dr Pavel V. Krot

  22. Review of Linear Electric Motor Hammers—An Energy-Saving and Eco-Friendly Solution in Industry

    Article • Energies, January 2023, MDPI AG

    Dr Pavel V. Krot

  23. On the Dynamics of an Enhanced Coaxial Inertial Exciter for Vibratory Machines

    Article • Machines, January 2023, MDPI AG

    Dr Pavel V. Krot

  24. Angular Backlashes Monitoring in Heavy Industrial Machines

    Article • January 2023, Springer Science + Business Media

    Dr Pavel V. Krot

  25. Optimization of briquetting technology of fine-grained metallurgical materials based on statistical models of compressibility

    Article • Powder Technology, November 2022, Elsevier

    Dr Pavel V. Krot

  26. Measurement of idlers rotation speed in belt conveyors based on image data analysis for diagnostic purposes

    Article • Measurement, October 2022, Elsevier

    Dr Pavel V. Krot

  27. Studying the Influence of the Impact Gap Value on the Average Translational Speed of the Wheeled Vibration-Driven Robot

    Article • September 2022, MDPI AG

    Dr Pavel V. Krot

  28. Nonequilibrium thermodynamic model of diffusion processes in the steel - carbon thin film tribological system

    Article • Material Science & Engineering International Journal, February 2022, MedCrave Group LLC

    Dr Pavel V. Krot

  29. Dynamic Analysis of an Enhanced Multi-Frequency Inertial Exciter for Industrial Vibrating Machines

    Article • Machines, February 2022, MDPI AG

    Dr Pavel V. Krot

  30. Experimental Study of the Rolling Friction Coefficient in Highly Loaded Supports of Rotary Kilns

    Article • January 2022, Springer Science + Business Media

    Dr Pavel V. Krot

  31. Increasing the Durability of Critical Parts in Heavy-Duty Industrial Machines by Deep Cryogenic Treatment

    Article • January 2022, Springer Science + Business Media

    Dr Pavel V. Krot

  32. Optimization of Wastes Compaction Parameters in Case of Gradual Wear of the Briquetting Press Rolls

    Article • January 2022, Springer Science + Business Media

    Dr Pavel V. Krot

  33. Safe Operation of Underground Mining Vehicles Based on Cyclic Fatigue Monitoring of Powertrains

    Article • January 2022, Springer Science + Business Media

    Dr Pavel V. Krot

  34. Materials Selection and Design Options Analysis for a Centrifugal Fan Impeller in a Horizontal Conveyor Dryer

    Article • Materials, November 2021, MDPI AG

    Dr Pavel V. Krot

  35. Dynamics control of powered hydraulic roof supports in the underground longwall mining complex

    Article • IOP Conference Series Earth and Environmental Science, November 2021, Institute of Physics Publishing

    Dr Pavel V. Krot

  36. Model-Based Decision Support System for the Blast Furnace Charge of Burden Materials

    Article • July 2021, Springer Science + Business Media

    Dr Pavel V. Krot

  37. Optimization of the Vibrating Machines with Adjustable Frequency Characteristics

    Article • July 2021, Springer Science + Business Media

    Dr Pavel V. Krot

  38. Influence of modes of thermal hardening and the subsequent cryogenic processing on structure and properties of steel 38Ni3CrMoV

    Article • Metaloznavstvo ta obrobka metalìv, June 2021, National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications)

    Dr Pavel V. Krot

  39. An overview of torque meters and new devices development for condition monitoring of mining machines

    Article • IOP Conference Series Earth and Environmental Science, March 2021, Institute of Physics Publishing

    Dr Pavel V. Krot

  40. Energy-Saving Inertial Drive for Dual-Frequency Excitation of Vibrating Machines

    Article • Energies, December 2020, MDPI AG

    Dr Pavel V. Krot

  41. Increasing Energy Efficiency and Productivity of the Comminution Process in Tumbling Mills by Indirect Measurements of Internal Dynamics—An Overview

    Article • Energies, December 2020, MDPI AG

    Dr Pavel V. Krot

  42. Process Monitoring in Heavy Duty Drilling Rigs—Data Acquisition System and Cycle Identification Algorithms

    Article • Energies, December 2020, MDPI AG

    Dr Pavel V. Krot

  43. Vibration-Based Diagnostics of Radial Clearances and Bolts Loosening in the Bearing Supports of the Heavy-Duty Gearboxes

    Article • Sensors, December 2020, MDPI AG

    Dr Pavel V. Krot

  44. Failure analysis and modernization of high-pressure hydraulic press for drilling tubes testing

    Article • Engineering Failure Analysis, November 2020, Elsevier

    Dr Pavel V. Krot

  45. Development and Verification of the Diagnostic Model of the Sieving Screen

    Article • Shock and Vibration, June 2020, Wiley

    Dr Pavel V. Krot

  46. The identification of operational cycles in the monitoring systems of underground vehicles

    Article • Measurement, February 2020, Elsevier

    Dr Pavel V. Krot

  47. Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling

    Article • Fundamental and applied problems of ferrous metallurgy, January 2020, Institute of Ferrous Metallurgy Z.I. Nekrasova of the National Academy of Sciences of Ukraine

    Dr Pavel V. Krot

  48. Model Based Monitoring of Dynamic Loads and Remaining Useful Life Prediction in Rolling Mills and Heavy Machinery

    Article • January 2020, Springer Science + Business Media

    Dr Pavel V. Krot

  49. The experimental study of compaction parameters and elastic after-effect of fine fraction raw materials

    Article • Mining Science, January 2020, Politechnika Wroclawska Oficyna Wydawnicza

    Dr Pavel V. Krot

  50. Dynamical processes in a multi-motor gear drive of heavy slabbing mill

    Article • Journal of Vibroengineering, December 2019, JVE International Ltd.

    Dr Pavel V. Krot

  51. Methods of Springs Failures Diagnostics in Ore Processing Vibrating Screens

    Article • IOP Conference Series Earth and Environmental Science, November 2019, Institute of Physics Publishing

    Dr Pavel V. Krot

  52. Simulation of backup rolls quenching with experimental study of deep cryogenic treatment

    Article • International Journal of Microstructure and Materials Properties, January 2017, Inderscience Publishers

    Dr Pavel V. Krot

  53. Simulation of backup rolls quenching with experimental study of deep cryogenic treatment

    Article • International Journal of Microstructure and Materials Properties, January 2017, Inderscience Publishers

    Dr Pavel V. Krot

  54. Vibration Diagnostics of Rolling Mills Based on Nonlinear Effects in Dynamics

    Article • Bulletin of the National Technical University «KhPI» Series Dynamics and Strength of Machines, October 2016, National Technical University Kharkiv Polytechnic Institute

    Dr Pavel V. Krot

  55. Statistical Dynamics of the Rolling Mills

    Article • January 2011, Springer Science + Business Media

    Dr Pavel V. Krot

  56. Transient torsional vibrations control in the geared drive trains of the hot rolling mills

    Article • July 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Pavel V. Krot