All Stories

  1. Optimal Response of Isolated Multi-span Continous Deck Bridges Subjected to Near Fault and Far Field Events

    Article • January 2024, Springer Science + Business Media

    Dr Paolo Castaldo

  2. Organizational Analysis to Improve Safety Planning of Road Networks

    Article • January 2024, Springer Science + Business Media

    Dr Paolo Castaldo

  3. Safety Evaluation of an Existing PRC Bridge Beam: Preliminary Outcomes of In-Situ Test

    Article • January 2024, Springer Science + Business Media

    Dr Paolo Castaldo

  4. Robustness improvements for 2D reinforced concrete moment resisting frames: Parametric study by means of NLFE analyses

    Article • Structural Concrete, September 2023, Wiley

    Dr Paolo Castaldo

  5. Influence of Masonry Infills on Seismic Performance of an Existing RC Building Retrofitted by Means of FPS Devices

    Article • Applied Sciences, March 2023, MDPI AG

    Dr Paolo Castaldo

  6. Technical and organizational challenges in the risk management of road infrastructures

    Article • Journal of Risk Research, January 2022, Taylor & Francis

    Dr Paolo Castaldo

  7. Safety Management of Infrastructures Through an Organizational Approach: Preliminary Results

    Article • January 2022, Springer Science + Business Media

    Dr Paolo Castaldo

  8. Optimal sliding friction coefficients for isolated viaducts and bridges: A comparison study

    Article • Structural Control and Health Monitoring, August 2021, Hindawi Publishing Corporation

    Dr Paolo Castaldo

  9. Optimal DCFP bearing properties and seismic performance assessment in nondimensional form for isolated bridges

    Article • Earthquake Engineering & Structural Dynamics, April 2021, Wiley

    Dr Paolo Castaldo

  10. Model uncertainty in non‐linear numerical analyses of slender reinforced concrete members

    Article • Structural Concrete, January 2021, Wiley

    Dr Paolo Castaldo

  11. Seismic Upgrading of Existing Reinforced Concrete Buildings Using Friction Pendulum Devices: A Probabilistic Evaluation

    Article • Applied Sciences, December 2020, MDPI AG

    Dr Paolo Castaldo

  12. Seismic Reliability-Based Design Approach for Base-Isolated Systems in Different Sites

    Article • Sustainability, March 2020, MDPI AG

    Dr Paolo Castaldo

  13. Partial factor methods for existing structures according to fib Bulletin 80: Assessment of an existing prestressed concrete bridge

    Article • Structural Concrete, November 2019, Wiley

    Dr Paolo Castaldo

  14. Safety formats for non-linear finite element analysis of reinforced concrete structures: discussion, comparison and proposals

    Article • Engineering Structures, August 2019, Elsevier

    Dr Paolo Castaldo

  15. Seismic response of bridges equipped with FPS

    Article • January 2019, American Institute of Physics

    Dr Paolo Castaldo

  16. Partial safety factor for resistance model uncertainties in 2D non-linear finite element analysis of reinforced concrete structures

    Article • Engineering Structures, December 2018, Elsevier

    Dr Paolo Castaldo

  17. Seismic reliability-based ductility demand for hardening and softening structures isolated by friction pendulum bearings

    Article • Structural Control and Health Monitoring, September 2018, Wiley

    Dr Paolo Castaldo

  18. Framework for definition of design formulations from empirical and semi-empirical resistance models

    Article • Structural Concrete, May 2018, Wiley

    Dr Paolo Castaldo

  19. Seismic performance assessment of isolated bridges for different limit states

    Article • Journal of Civil Structural Health Monitoring, November 2017, Springer Science + Business Media

    Dr Paolo Castaldo

  20. Validation of probabilistic theory of plastic mechanism control by means of Monte Carlo simulations

    Article • ce/papers, September 2017, Wiley

    Dr Paolo Castaldo

  21. Ultimate behaviour of RHS temper T6 aluminium alloy beams subjected to non-uniform bending: Parametric analysis

    Article • Thin-Walled Structures, June 2017, Elsevier

    Dr Paolo Castaldo

  22. FEM simulations and rotation capacity evaluation for RHS temper T4 aluminium alloy beams

    Article • Composites Part B Engineering, April 2017, Elsevier

    Dr Paolo Castaldo

  23. Effects of the axial force eccentricity on the time-variant structural reliability of aging r.c. cross-sections subjected to chloride-induced corrosion

    Article • Engineering Structures, January 2017, Elsevier

    Dr Paolo Castaldo

  24. Seismic reliability-based ductility demand evaluation for inelastic base-isolated structures with friction pendulum devices

    Article • Earthquake Engineering & Structural Dynamics, December 2016, Wiley

    Dr Paolo Castaldo

  25. Optimal design of friction pendulum system properties for isolated structures considering different soil conditions

    Article • Soil Dynamics and Earthquake Engineering, November 2016, Elsevier

    Dr Paolo Castaldo

  26. Life-cycle cost and seismic reliability analysis of 3D systems equipped with FPS for different isolation degrees

    Article • Engineering Structures, October 2016, Elsevier

    Dr Paolo Castaldo

  27. Proposal for an Empirical Evaluation of Rotation Capacity of RHS Aluminium Alloy Beams Based on FEM Simulations

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    Dr Paolo Castaldo

  28. Evaluation of Rotation Capacity of RHS Aluminium Alloy Beams by FEM Simulation: Temper T4

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    Dr Paolo Castaldo

  29. Evaluation of Rotation Capacity of RHS Aluminium Alloy Beams by FEM Simulation: Temper T6

    Article • Key Engineering Materials, September 2016, Trans Tech Publications

    Dr Paolo Castaldo

  30. Influence of the strength reduction factor on the seismic reliability of structures with FPS considering intermediate PGA/PGV ratios

    Article • Composites Part B Engineering, September 2016, Elsevier

    Dr Paolo Castaldo

  31. Seismic fragility and reliability of structures isolated by friction pendulum devices: seismic reliability-based design (SRBD)

    Article • Earthquake Engineering & Structural Dynamics, August 2016, Wiley

    Dr Paolo Castaldo

  32. Time-Variant Reliability of RC Structures

    Article • Applied Mechanics and Materials, July 2016, Trans Tech Publications

    Dr Paolo Castaldo

  33. SEISMIC RELIABILITY-BASED DESIGN OF STRUCTUTRES ISOLATED BY FPS

    Article • January 2016, ECCOMAS

    Dr Paolo Castaldo

  34. SEISMIC RETROFIT OF EXISTING BUILDINGS THROUGH THE DISSIPATIVE COLUMNS

    Article • January 2016, ECCOMAS

    Dr Paolo Castaldo

  35. Influence of FPS bearing properties on the seismic performance of base-isolated structures

    Article • Earthquake Engineering & Structural Dynamics, August 2015, Wiley

    Dr Paolo Castaldo

  36. Seismic reliability of base-isolated structures with friction pendulum bearings

    Article • Engineering Structures, July 2015, Elsevier

    Dr Paolo Castaldo

  37. The Dissipative Column: A New Hysteretic Damper

    Article • Buildings, February 2015, MDPI AG

    Dr Paolo Castaldo

  38. Effects of deep excavation on seismic vulnerability of existing reinforced concrete framed structures

    Article • Soil Dynamics and Earthquake Engineering, September 2014, Elsevier

    Dr Paolo Castaldo

  39. Seismic reliability analysis of base-isolated structures with friction pendulum system

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Paolo Castaldo

  40. Optimal integrated seismic design of structural and viscoelastic bracing-damper systems

    Article • Earthquake Engineering & Structural Dynamics, March 2014, Wiley

    Dr Paolo Castaldo

  41. Integrated Seismic Design of Structure and Control Systems

    Article • January 2014, Springer Science + Business Media

    Dr Paolo Castaldo

  42. Structural safety of existing buildings near deep excavations

    Article • International Journal of Structural Engineering, January 2014, Inderscience Publishers

    Dr Paolo Castaldo

  43. Passive Structural Control

    Article • November 2013, Springer Science + Business Media

    Dr Paolo Castaldo

  44. Applying the Optimal Integrated Design Methodology

    Article • November 2013, Springer Science + Business Media

    Dr Paolo Castaldo

  45. Modeling of Viscoelastic Dissipative Bracing Systems

    Article • November 2013, Springer Science + Business Media

    Dr Paolo Castaldo

  46. Passive Energy Dissipation Devices

    Article • November 2013, Springer Science + Business Media

    Dr Paolo Castaldo

  47. Dynamic Response of Systems Equipped with Viscous and Viscoelastic Dampers

    Article • November 2013, Springer Science + Business Media

    Dr Paolo Castaldo

  48. Integrated Design of Proportionally Damped Framed Structural Systems Equipped with Viscous Devices

    Article • November 2013, Springer Science + Business Media

    Dr Paolo Castaldo

  49. Probabilistic analysis of excavation-induced damages to existing structures

    Article • Computers and Geotechnics, September 2013, Elsevier

    Dr Paolo Castaldo