All Stories

  1. Sedimentation evaluation of high-viscosity linear polysiloxane-based magnetorheological fluids using automated vertical axis inductance monitoring system
  2. Energy Absorption Efficiencies of Honeycomb Structures with Buckling Initiators
  3. Actuation of a 3D Printed Sweeping Wing Mechanism Using Pneumatic Artificial Muscles
  4. Sedimentation of magnetorheological fluids measured using an automated vertical axis inductance monitoring system
  5. Development of magnetorheological fluids within 3D printed elastomeric cellular structures with an accumulator
  6. Adaptively tunable magnetorheological elastomer-based vibration absorber for a propeller aircraft seat
  7. Process parameter effects on cellular structured materials using hollow glass spheres
  8. Comparison of contractile and extensile pneumatic artificial muscles
  9. Control and Analysis of a Magnetorheological Energy Absorber for both Shock and Vibration
  10. Using Mason number to predict MR damper performance from limited test data
  11. State observation–based control algorithm for dynamic vibration absorbing systems featuring magnetorheological elastomers: Principle and analysis
  12. Powering a Lower Limb Exoskeleton Using Pneumatic Artificial Muscles
  13. Variable recruitment in bundles of miniature pneumatic artificial muscles
  14. Comparison of contractile and extensile pneumatic artificial muscles
  15. Testing and analysis of magnetorheological fluid sedimentation in a column using a vertical axis inductance monitoring system
  16. Adaptive Control and Actuation System Development for Biomimetic Morphing
  17. Analytical model and stability analysis of the leading edge spar of a passively morphing ornithopter wing
  18. Effect of bladder wall thickness on miniature pneumatic artificial muscle performance
  19. Influence of Occupant Compliance on a Vertically Stroking Helicopter Crew Seat Suspension
  20. Scaling temperature dependent rheology of magnetorheological fluids
  21. Rheological characterization of a magnetorheological ferrofluid using iron nitride nanoparticles
  22. Development of a Quasi-Static Span-Extending Blade Tip for a Morphing Helicopter Rotor
  23. Biodynamic Model of a Seated Occupant Exposed to Intense Impacts
  24. Applications of Magnetorheological Technology to Semiactive Vibration Control Systems
  25. Drop-Induced Shock Mitigation Using Adaptive Magnetorheological Energy Absorbers Incorporating a Time Lag
  26. Mechanism and bias considerations for design of a bi-directional pneumatic artificial muscle actuator
  27. Experimental validation of a magnetorheological energy absorber design optimized for shock and impact loads
  28. Mason Number Analysis of a Magnetorheological Fluid-Based Rotary Energy Absorber
  29. Special Collection on Energy Harvesting
  30. Dynamics of a pneumatic artificial muscle actuation system driving a trailing edge flap
  31. Quasi-static nonlinear response of pneumatic artificial muscles for both agonistic and antagonistic actuation modes
  32. Hydromechanical Analysis of Fluid–Elastomeric Lag Dampers Including Subzero Temperatures
  33. Control of a Heavy-Lift Robotic Manipulator with Pneumatic Artificial Muscles
  34. Magnetorheological impact seat suspensions for ground vehicle crash mitigation
  35. Advanced Kinematic Tailoring for Morphing Aircraft Actuation
  36. Optimal control of gun recoil in direct fire using magnetorheological absorbers
  37. Performance of magnetorheological fluids beyond the chain based shear limit
  38. Conceptual design of rotary magnetostrictive energy harvester
  39. Flow Mode Magnetorheological Dampers with an Eccentric Gap
  40. Applications of Controllable Smart Fluids to Mechanical Systems
  41. Rapid Consolidation of Gamma Titanium Aluminide Powders Attrition Milled to Submicron Scale
  42. Adaptive magnetorheological shock isolation mounts for drop-induced impacts
  43. Nonlinear modeling of magnetorheological energy absorbers under impact conditions
  44. Miniaturized Pneumatic Artificial Muscles Actuating a Bio-Inspired Robot Hand
  45. Experimental validation of a magnetorheological energy absorber design analysis
  46. Semi-active magnetorheological refueling probe systems for aerial refueling events
  47. Magnetorheological Damper Utilizing an Inner Bypass for Ground Vehicle Suspensions
  48. Effect of Particle Size Distribution on Chain Structures in Magnetorheological Fluids
  49. Special Issue—ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Symposium on Enabling Technologies and Integrated System Design
  50. Adaptive magnetorheological seat suspension for adaptive shock mitigation
  51. Simulation of adaptive semi-active magnetorheological seat damper for vehicle occupant blast protection
  52. Analysis and testing of an inner bypass magnetorheological damper for shock and vibration mitigation
  53. Nonlinear analysis of quasi-static response of pneumatic artificial muscles for agonistic and antagonistic actuation modes
  54. Advanced Kinematic Tailoring for Morphing Aircraft Actuation
  55. Semi-empirical modeling of hysteresis compensation in magnetostrictive actuator
  56. Norman Wereley: Bioinspired pneumatic artificial muscle actuator system design for aerospace and robotics applications
  57. Fabrication and Characterization of Small-scale Pneumatic Artificial Muscles for a Bio-Inspired Robotic Hand
  58. Magnetorheology
  59. CHAPTER 9. Magnetorheological Fluids Flowing Through Porous Media: Analysis, Experimental Evaluation, and Applications
  60. CHAPTER 12. Adaptive Magnetorheological Energy Absorbing Mounts for Shock Mitigation
  61. CHAPTER 13. Semi-Active Isolation System Using Self-Powered Magnetorheological Dampers
  62. CHAPTER 14. Controllable Magnetorheological Damping in Advanced Helicopter Rotors
  63. CHAPTER 2. Magnetorheology of Fe Nanofibers Dispersed in a Carrier Fluid
  64. Analysis of a magnetorheological damper incorporating temperature dependence
  65. Analysis of nonlinear elastic behavior in miniature pneumatic artificial muscles
  66. Parallel Simulation of Transient Magnetorheological Direct Shear Flows Using Millions of Particles
  67. Magnetorheological Fluids Employing Substitution of Nonmagnetic for Magnetic Particles to Increase Yield Stress
  68. Advances in gamma titanium aluminides and their manufacturing techniques
  69. Optimal Control of Gun Recoil Using Magnetorheological Dampers
  70. A Bidirectional-Controllable Magnetorheological Energy Absorber for Shock and Vibration Isolation Systems
  71. Hydromechanical Analysis of a Fluid-Elastomeric Lag Damper Incorporating Temperature Effects
  72. Fabrication and characterization of fluidic artificial muscles having millimeter-scale diameters
  73. High shear rate characterization of magnetorheological fluids
  74. A bi-annular-gap magnetorheological energy absorber for shock and vibration mitigation
  75. Control of a Heavy-Lift Robotic Manipulator with Pneumatic Artificial Muscles
  76. Characterization of rapidly consolidated γ-TiAl
  77. Fatigue life testing of swaged pneumatic artificial muscles as actuators for aerospace applications
  78. Special Issue – 12th International Conference on Electrorheological Fluids and Magnetorheological Suspensions – Part 1
  79. Compact hybrid electrohydraulic actuators using smart materials: A review
  80. Pneumatic artificial muscles for trailing edge flap actuation: a feasibility study
  81. Control Evaluations of Semiactive Fluid-Elastomeric Helicopter Lag Damper
  82. Development and Testing of a Span-Extending Morphing Wing
  83. Special Topical Issue on Morphing Aircraft
  84. BEHAVIOR OF MR FLUIDS AT HIGH SHEAR RATE
  85. ADAPTIVE ENERGY ABSORBERS FOR DROP-INDUCED SHOCK MITIGATION
  86. SENSITIVITY OF MAGNETORHEOLOGICAL DAMPER BEHAVIOR TO PERTURBATIONS IN TEMPERATURE VIA BOUC - WEN MODEL
  87. Semi-active magnetoreheological refueling probe systems for aerial refueling events
  88. BEHAVIOR OF MR FLUIDS AT HIGH SHEAR RATE
  89. Preface: Educating Engineers About Intelligent Material Systems and Structures
  90. Characterization of Rapidly Consolidated Titanium Diboride
  91. Adaptive Energy Absorption System For A Vehicle Seat
  92. Massively Parallel Simulations of Chain Formation and Restructuring Dynamics in a Magnetorheological Fluid
  93. Optimized Biodynamic Shock Attenuation Performance Using an Adaptive Seat Suspension
  94. Stability and Hopf Bifurcation of Impact Dynamics Considering Delay in a Semi-Active Energy Absorbing Suspension System
  95. A Constant Stroking Load Regulator for Shock Absorption
  96. Cramer–Rao Bound Development for Linear Time Periodic Systems
  97. Analysis of Fly Fishing Rod Casting Dynamics
  98. Experimental characterization of thermal conductance switching in magnetorheological fluids
  99. Optimal Terminal Trajectory Control of Vertically Stroking Crew Seats Using MREAs
  100. Fatigue Life Testing of Swaged Pneumatic Artificial Muscles for Aerospace Morphing Applications
  101. Adaptive Dampers Employing Magnetorheological Valves Filled with Porous Media
  102. Adaptive Snubber-Type Magnetorheological Fluid-Elastomeric Helicopter Lag Damper
  103. Fatigue Testing of Pneumatic Artificial Muscle Actuators
  104. Behavior of Magnetorheological Fluid Composites Employing Carrier Fluids Certified for Landing Gear Use
  105. Experimental Validation of a Hybrid Electrostrictive Hydraulic Actuator Analysis
  106. Sensitivity of Magnetorheological Damper Behavior to Perturbations in Temperature
  107. Adaptive Control of a Sliding Seat Using Magnetorheological Energy Absorbers
  108. Mitigation of Biodynamic Response to Shock Loads Using Semi-Active Vertically Stroking Crew Seats
  109. Wind Tunnel Testing of a Helicopter Rotor Trailing Edge Flap Actuated via Pneumatic Artificial Muscles
  110. Unsteady Fluid Flow in Hybrid Hydraulic Actuators
  111. Design, test and model of a hybrid magnetostrictive hydraulic actuator
  112. Adaptive Magnetorheological Isolation Systems for Ground Support Equipment in Mobile Launch Platforms
  113. Effects of Temperature on Magnetorheological Fluid Elastomeric Lag Dampers for Helicopter Rotors
  114. Impact of Nanowire Versus Spherical Microparticles in Magnetorheological Elastomer Composites
  115. Pneumatic Artificial Muscles for Aerospace Applications
  116. Dynamic modeling of Mckibben pneumatic artificial muscles for antagonistic actuation
  117. Time-Periodic Stability of a Flapping Insect Wing Structure in Hover
  118. Self-Powered Magnetorheological Dampers
  119. Optimal Control of Vertically Stroking Crew Seats Employing Magnetorheological Energy Absorbers
  120. Semi-Active Isolation System Using Self-Powered Magnetorheological Dampers
  121. Development of a Piezohydraulic Active Pitch Link for a Swashplateless Helicopter Rotor
  122. Experimental Characterization and Static Modeling of McKibben Actuators
  123. Hybrid magnetorheological fluid–elastomeric lag dampers for helicopter stability augmentation
  124. Experimental and Theoretical Development of Multiple Fluid Mode Magnetorheological Isolators
  125. Rate-Dependent Elastoslide Model for Magnetorheological Damper
  126. Design and Fabrication of a Passive 1-D Morphing Aircraft Skin
  127. A magnetorheological actuation system: test and model
  128. Pneumatic Artificial Muscle Activation for Trailing Edge Flaps
  129. Behavior of Magnetorheological Fluids Employing Carrier Fluids Certified for Landing Gear Use
  130. Magnetorheological Energy Absorbers Employing a Valve Filled With Porous Media
  131. Shock Isolation Systems Using Magnetorheological Dampers
  132. Performance Analysis of Magnetorheological Energy Absorbers Under Impact Conditions
  133. A Semi-Active Magnetorheological Fluid Snubber Lag Damper for a Hingeless/Bearingless Helicopter
  134. Energy Harvesting Utilizing Single Crystal PMN-PT Material
  135. Torque Loss and Crack Monitoring Near Fasteners for Isotropic and Composite Helicopter Tail Boom Structural Models
  136. Experimental Detection and Quantitative Interrogation of Damage in a Jointed Composite Structure
  137. Magnetorheological Shock Absorber for Crew Seats in the Expeditionary Fighting Vehicle
  138. Mechanisms-Based Analysis of Filled Elastomeric Dampers Under Single and Dual Frequency Excitations
  139. Effects of Braid Angle on Pneumatic Artificial Muscle Actuator Performance
  140. Design and Testing of a PMN-PT Based Compact Hybrid Actuator
  141. Magnetorheological Isolators Using Multiple Fluid Modes
  142. Frontal Crash Mitigation using MR Impact Damper for Controllable Bumper
  143. Distributed Rate-Dependent Elastoslide Model for Elastomeric Lag Dampers
  144. Nondimensional Herschel—Bulkley Analysis of Magnetorheological and Electrorheological Dampers
  145. A Unifying Perspective on the Quasi-steady Analysis of Magnetorheological Dampers
  146. Comparison of Piezoelectric, Magnetostrictive, and Electrostrictive Hybrid Hydraulic Actuators
  147. MAGNETORHEOLOGICAL ISOLATORS USING MULTIPLE FLUID MODES
  148. MAGNETORHEOLOGICAL BYPASS DAMPER EXPLOITING FLOW THROUGH A POROUS CHANNEL
  149. NONDIMENSIONAL ANALYSIS OF SHEAR-MODE TYPE ROTARY DRUM DAMPERS USING MAGNETORHEOLOGICAL FLUIDS
  150. A MAGNETORHEOLOGICAL DAMPER WITH BIFOLD VALVES FOR SHOCK AND VIBRATION MITIGATION
  151. HIGH VERSUS LOW FIELD VISCOMETRIC CHARACTERIZATION OF BIDISPERSE MR FLUIDS
  152. Viscometric and Sedimentation Characterization of Bidisperse Magnetorheological Fluids
  153. Energy Absorber Using a Magnetorheological Bypass Valve Filled With Ferromagnetic Beads
  154. Semi-Active Control of Vertical Stroking Helicopter Crew Seat for Enhanced Crashworthiness
  155. Cramer-Rao Bound Development for Linear Time Periodic Systems
  156. Experimental Testing of Pneumatic Artificial Muscles for Trailing Edge Flap Actuation
  157. Experimental Investigation of Flapping Wing Performance in Hover
  158. A Time-Periodic Stability Analysis of Flapping Wing Structures for Micro Air Vehicles
  159. Design and Development of a High Frequency Biologically Inspired Flapping Wing Mechanism
  160. Semi-Active Magnetorheological Helicopter Crew Seat Suspension for Vibration Isolation
  161. Development of a Piezohydraulic Active Pitch Link for a Swashplateless Helicopter Rotor
  162. Blocked force and free displacement characterization of PMN-32%PT stacks
  163. Shock load mitigation using magnetorheological energy absorber with bifold valves
  164. Semi-Active Linear Stroke Magnetorheological Fluid-Elastic Helicopter Lag Damper
  165. Hysteretic Behavior of Magnetorheological Fluid and Identification Using Preisach Model
  166. A Magnetorheological Actuation System: Part I — Testing
  167. Analysis of Energy Harvesting Devices Using Macro-Fiber Composite Materials
  168. Spin Testing of Pneumatic Artificial Muscle Systems for Helicopter Rotor Applications
  169. A Magnetorheological Actuation System - Part II: Modeling
  170. Dynamic Model of a Hybrid Hydraulic Actuator Utilizing Different Smart Materials
  171. Application of CFD in the Design and Analysis of a Piezoelectric Hydraulic Pump
  172. Self-Powered Magnetorheological Dampers
  173. Comparison of Piezoelectric, Magnetostrictive and Electrostrictive Hybrid Hydraulic Actuators
  174. Experimental Characterization and Static Modeling of McKibben Actuators
  175. Characterization and Modeling Magnetorheological By-Pass Porous Damper Exploiting Flow Through a Porous Media
  176. Applications of the poincaré inequality to extended Kantorovich method
  177. Dynamic Modeling of Magnetostrictive Hydraulic Pump
  178. Scaling-Up Issues With a Magnetostrictive-Hydraulic Pump
  179. A Magnetorheological Piezohydraulic Actuator
  180. Biodynamic Response Mitigation to Shock Loads Using Magnetorheological Helicopter Crew Seat Suspensions
  181. Semi-Active Vibration Isolation Using Magnetorheological Isolators
  182. MAGNETORHEOLOGICAL FLUID AND ELASTOMERIC LAG DAMPER FOR HELICOPTER STABILITY AUGMENTATION
  183. NONDIMENSIONAL QUASISTEADY ANALYSIS OF A MAGNETORHEOLOGICAL DASHPOT DAMPER
  184. NONDIMENSIONAL ANALYSIS OF ANNULAR DUCT FLOW IN MAGNETORHEOLOGICAL / ELECTRORHEOLOGICAL DAMPERS
  185. RATE-DEPENDENT ELASTO-SLIDE MODEL FOR SINGLE AND DUAL FREQUENCY MR LAG DAMPER BEHAVIOR
  186. DESIGN AND TESTING OF A COMPACT MAGNETORHEOLOGICAL DAMPER FOR HIGH IMPULSIVE LOADS
  187. Effective design strategy for a magneto-rheological damper using a nonlinear flow model
  188. An automotive suspension strut using compressible magnetorheological fluids
  189. Genetic algorithms for rheological parameter estimation of magnetorheological fluids
  190. Nondimensional Analysis of Electrorheological Dampers using an Eyring Constitutive Relationship
  191. MAGNETORHEOLOGICAL FLUID AND ELASTOMERIC LAG DAMPER FOR HELICOPTER STABILITY AUGMENTATION
  192. RATE-DEPENDENT ELASTO-SLIDE MODEL FOR SINGLE AND DUAL FREQUENCY MR LAG DAMPER BEHAVIOR
  193. NONDIMENSIONAL ANALYSIS OF ANNULAR DUCT FLOW IN MAGNETORHEOLOGICAL/ELECTRORHEOLOGICAL DAMPERS
  194. NONDIMENSIONAL QUASISTEADY ANALYSIS OF A MAGNETORHEOLOGICAL DASHPOT DAMPER
  195. Analysis of Bending Vibration of Rectangular Plates Using Two-Dimensional Plate Modes
  196. Double Adjustable Magnetorheological Dampers for a Gun Recoil System
  197. Quasi-Steady Axisymmetric Bingham-Plastic Model of Magnetorheological Flow Damper Behavior
  198. Quasi-Steady Herschel-Bulkley Analysis of Magnetorheological Dampers With Preyield Viscosity
  199. Bi-Directional Actuation of a Piston Using MR Valves and a Piezoelectric Pump
  200. Vibration Isolation of Precision Payloads for Aerial Vehicles Using Magnetorheological Isolators
  201. Free Vibration Analysis of Rotating Blades With Uniform Tapers
  202. Performance of a Magnetorheological Hydraulic Power Actuation System
  203. Volume-constrained optimization of magnetorheological and electrorheological valves and dampers
  204. Shock isolation systems using magnetorheological dampers
  205. Application of CFD in the design and analysis of a piezoelectric hydraulic pump
  206. Rheological parameter estimation for a ferrous-nanoparticle-based magnetorheological fluid using genetic algorithms
  207. Biviscous damping behavior in electrorheological shock absorbers
  208. Nondimensional Analysis of Electrorheological Dampers Using an Eyring Constitutive Relationship
  209. Rapid Consolidation of Gamma-TiAl Intermetallics via Plasma Pressure Compaction
  210. Rapid Consolidation of TiB
  211. Quasi-Steady Analysis of a Magnetorheological Dashpot Damper
  212. Magneto-Rheological Parameter Identification From Viscometric Flow Curves Using Genetic Algorithms
  213. Rapid Consolidation of Hf Doped NiTi for High Transformation Temperatures
  214. A magnetorheological hydraulic actuator driven by a piezopump
  215. Migration of biodynamic response to vibratory and blast-induced shock loads using magnetorheological seat suspensions
  216. Modelling of smart fluid dampers
  217. Nondimensional quasi-steady analysis of magnetorheological dampers utilizing a Herschel-Bulkley model with preyield viscosity
  218. Constitutive models of electrorheological and magnetorheological fluids using viscometers
  219. Twelfth International Conference on Adaptive Structures and Technologies
  220. Analysis and Applications of Extended Kantorovich–Krylov Method
  221. Vibration Control of a Landing Gear System Featuring Electrorheological/Magnetorheological Fluids
  222. Analysis of Sandwich Plates with Viscoelastic Damping Using Two-Dimensional Plate Modes
  223. Quasi-steady Bingham plastic analysis of an electrorheological flow mode bypass damper with piston bleed
  224. Analysis of Bending Vibration of Rectangular Plates Using 2D Plate Modes
  225. Design and Characterization of a Compact Impact Damper for High Impulsive Loads
  226. Approximations in Bingham Plastic Analysis of Electrorheological and Magnetorheological Dampers
  227. Impact of Strain Rate Dependent Viscosity on Damping Capacity of Electro- and Magnetorheological Dampers
  228. Characterization and Modeling of Nonlinear Elastomeric Dampers Under Sinusoidal Loading
  229. Control of Sweep Using Pneumatic Actuators to Morph Wings of Small Scale UAVs
  230. Volume-Constrained Optimization of Magnetorheological Valves
  231. Simulation of Elastomeric Damper Response Under Slowly Varying Amplitude Excitation
  232. Twelfth International Conference on Adaptive Structures and Technologies
  233. Magnetorheological Hydraulic Actuator Driven by a Piezopump
  234. Nondimensional Analysis of Electrorheological and Magnetorheological Dampers Using a Herschel-Bulkley Constitutive Model
  235. Nondimensional Damping Analysis of Flow-Mode Magnetorheological and Electrorheological Dampers
  236. Mitigation of Biodynamic Response to Vibratory and Blast-Induced Shock Loads Using Magnetorheological Seat Suspensions
  237. Free Vibration Analysis of Rotating Blades With Uniform Tapers
  238. Analysis of Flexible Fly Fishing Rods and Casting Dynamics
  239. Approximating Annular Duct Flow in ER/MR Dampers Using a Rectangular Duct
  240. Nondimensional Analysis of Electrorheological and Magnetorheological Dampers Using a Herschel-Bulkley Constitutive Model
  241. Double adjustable shock absorbers utilising electrorheological and magnetorheological fluids
  242. Seismic Control of Civil Structures Utilizing Semi-Active MR Braces
  243. Semi-Active Isolators Using Electrorheological/Magnetorheological Fluids
  244. Design of a High-Efficiency Magnetorheological Valve
  245. Electrorheological Damper Analysis Using an Eyring Constitutive Relationship
  246. Special Issue: Eighth International Conference on Electrorheological (ER) Fluids and Magnetorheological (MR) Suspensions and their Applications
  247. Quasi-Steady Bingham Biplastic Analysis of Electrorheological and Magnetorheological Dampers
  248. BEHAVIOR OF MAGNETORHEOLOGICAL FLUIDS UTILIZING NANOPOWDER IRON
  249. Magnetorheological fluids exploiting nanometer-sized particles
  250. Performance of a MR hydraulic power actuation system
  251. Comparative Analysis of the Time Response of Electrorheological and Magnetorheological Dampers Using Nondimensional Parameters
  252. Comparative analysis of Bingham characteristics of ER/MR fluids with different viscometers
  253. Semi-active vibration isolation using magnetorheological isolators
  254. Electrorheological damper analysis using an Eyring-plastic model
  255. Active/Passive Structural Damping Control for Rotorcraft Systems
  256. Free In-Plane Vibration of Rectangular Plates
  257. BEHAVIOR OF MAGNETORHEOLOGICAL FLUIDS UTILIZING NANOPOWDER IRON
  258. DESIGN OF A HIGH-EFFICIENCY MAGNETORHEOLOGICAL VALVE
  259. ELECTRORHEOLOGICAL DAMPER ANALYSIS USING AN EYRING CONSTITUTIVE RELATIONSHIP
  260. COMPARATIVE ANALYSIS OF THE TIME RESPONSE OF ELECTRORHEOLOGICAL AND MAGNETORHEOLOGICAL DAMPERS USING NONDIMENSIONAL PARAMETERS
  261. VIBRATION CONTROL OF A HELICOPTER TAIL LANDING GEAR SYSTEM USING ELECTRORHEOLOGICAL AND MAGNETORHEOLOGICAL SHOCK STRUTS
  262. PERFORMANCE ANALYSIS OF SMART IMPACT DAMPER SYSTEM USING HERSCHEL-BULKLEY MODEL
  263. Analysis of Plates with Passive Constrained Layer Damping Using 2D Plate Modes
  264. Nonlinear Damping Identification in Smart Structural Systems Utilizing ER or MR Dampers
  265. Spectral Finite Element Analysis of Sandwich Beams With Passive Constrained Layer Damping
  266. A Generalized kantorovich method and its application to free in-plane plate vibration problem
  267. Design of a MR hydraulic power actuation system
  268. Assessment of time response characteristics of electrorheological and magnetorheological dampers
  269. Characterization and Analysis of Magnetorheological Damper Behavior Under Sinusoidal Loading
  270. Time domain damping identification in helicopter rotor systems
  271. Free in-plane vibration of rectangular plates
  272. Mechanisms-based analysis for elastomeric lag damper behavior under single and dual frequency excitation
  273. Characterization and analysis of magnetorheological damper behavior under sinusoidal loading
  274. HELICOPTER DAMPING
  275. Design of a magnetorheological automotive shock absorber
  276. Bingham biplastic analysis of shear thinning and thickening in magnetorheological dampers
  277. QUASI-STEADY HERSCHEL-BULKLEY ANALYSIS OF ELECTRO- AND MAGNETO-RHEOLOGICAL FLOW MODE DAMPERS
  278. SEISMIC RESPONSE OF CIVIL STRUCTURES UTILIZING SEMI-ACTIVE MR AND ER BRACING SYSTEMS
  279. Characterization and analysis of magneto-rheological damper behavior due to sinusoidal loading
  280. Analysis of electro- and magneto-rheological flow mode dampers using Herschel-Bulkley model
  281. Seismic control of civil structures utilizing semiactive MR bracing systems
  282. The Fourth U.S. Army Research Office Workshop on Smart Structures
  283. Analysis of Sandwich Plates with Isotropic Face Plates and a Viscoelastic Core
  284. H ∞ Control of Active Constrained Layer Damping
  285. Nonlinear Damping Identification from Transient Data
  286. Quasi-Steady Herschel-Bulkley Analysis of Electroand Magneto-Rheological Flow Mode Dampers
  287. Seismic Response of Civil Structures Utilizing Semi-Active MR and ER Bracing Systems
  288. Hysteresis Modeling of Semi-Active Magnetorheological Helicopter Dampers
  289. Associate Technical Editor's Note
  290. Characterization of Magnetorheological Helicopter Lag Dampers
  291. Parametric analysis and testing of an electrorheological fluid damper
  292. Characterization of a magnetorheological fluid damper using a quasi-steady model
  293. Piezoactuation of sandwich plates with viscoelastic cores
  294. Nonlinear damping identification from transient data
  295. Steady-state sinusoidal behavior of elastomeric dampers
  296. Analysis and Testing of Electrorheological Bypass Dampers
  297. Analysis and Testing of Electrorheological Bypass Dampers
  298. Spectral finite element analysis of piezo-actuated sandwich beams with a viscoelastic core
  299. Nonlinear damping identification from transient data
  300. Nondimensional analysis of semi-active electrorheological and magnetorheological dampers using approximate parallel plate models
  301. Characterization of semiactive magnetorheological helicopter lag mode dampers
  302. Analysis and testing of electrorheological bypass dampers
  303. Dynamic characterization and analysis of magnetorheological damper behavior
  304. Frequency response of beams with passively constrained damping layers and piezoactuators
  305. Linear and nonlinear damping identification in helicopter rotor systems
  306. Analysis and testing of a linear stroke magnetorheological damper
  307. Overview of smart structures and integrated systems: 1997
  308. A nonlinear viscoelastic - plastic model for electrorheological fluids
  309. Modeling and experimental validation of a sandwich plate with isotropic face plates and viscoelestic core
  310. Nonlinear modeling and performance prediction of electrorheological fluid dampers
  311. Induced strain actuation of sandwich plates with viscoelastic damping layers
  312. Analysis of electrorheological dampers via approximate parallel plate models
  313. System identification of electrorheological fluid-based dampers using a nonlinear viscoelastic-plastic phenomenological model
  314. Transient analysis for damping identification in rotating composite beams with integral damping layers
  315. Analysis and testing of Bingham plastic behavior in semi-active electrorheological fluid dampers
  316. System identification of ER fluid dampers using a nonlinear mechanisms-based model
  317. Hybrid passive/active damping for robust multivariable acoustic control in composite plates
  318. Active-passive constrained layer damping of composite rotating flexbeams
  319. Frequency domain system identification of helicopter blades with trailing edge flaps
  320. Controllable fluid dampers for helicopter rotor stability augmentation
  321. Development of ER fluid-based actuators for rotorcraft flexbeam applications
  322. Passive damping techniques for composite rotorcraft flex beams
  323. Distributed damping of rotorcraft flexbeams using electrorheological fluids
  324. Active constrained layer damping for rotorcraft flex beams
  325. Active damping of flexible rotor blade dynamics using electrorheological-fluid-based actuators
  326. Active damping of a flexible beam using ER fluid actuators
  327. Model-based consolidation for near-net shape
  328. Stability of linear time periodic systems using generalized Hill and Floquet analysis
  329. Hot isostatic pressing using the intelligent processing of materials approach
  330. Performance of higher harmonic control algorithms for helicopter vibration reduction
  331. Insights and approximations in dynamic analysis of spacecraft tethers
  332. Approximate evaluation of semi-Markov chain reliability models
  333. Frequency response of linear time periodic systems
  334. Approximate Evaluation of Semi-Markov Chain Reliability Models,
  335. Approximate Evaluation of Reliability and Availability via Perturbation Analysis.
  336. Modeling the Damping Mechanism in Electrorheological Fluid Based Dampers
  337. Composite Rotorcraft Flexbeams with Viscoelastic Damping Layers for Aeromechanical Stability Augmentation
  338. Approximate semi-Markov chain reliability models