All Stories

  1. Oxidation behaviour of SiC/SiC ceramic matrix composites in air

    Article • Journal of the European Ceramic Society, November 2016, Elsevier

    Dr Niranjan Patra

  2. Synthesis, characterization and use of synthesized fine zirconium diboride as an additive for densification of commercial zirconium diboride powder

    Article • Ceramics International, June 2016, Elsevier

    Dr Niranjan Patra

  3. Low-temperature solution synthesis of nanosized hafnium carbide using pectin

    Article • Ceramics International, January 2016, Elsevier

    Dr Niranjan Patra

  4. Advances in Electrospun Nanofibers

    Article • Journal of Nanomaterials, January 2016, Hindawi Publishing Corporation

    Dr Niranjan Patra

  5. Micromorphological characterization of polymer-oxide nanocomposite thin films by atomic force microscopy and fractal geometry analysis

    Article • Progress in Organic Coatings, December 2015, Elsevier

    Dr Niranjan Patra

  6. Thermal Properties of Rare-Earth Monosilicates for EBC on Si-Based Ceramic Composites

    Article • Journal of the American Ceramic Society, October 2015, Wiley

    Dr Niranjan Patra

  7. Synthesis of ZrB2/SiC composite powders by single-step solution process from organic–inorganic hybrid precursor

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, August 2015, Taylor & Francis

    Dr Niranjan Patra

  8. Deacetylation-induced changes in thermal properties of Sterculia urens gum

    Article • Journal of Thermal Analysis and Calorimetry, April 2015, Springer Science + Business Media

    Dr Niranjan Patra

  9. Structure–property relationships in Sterculia urens/polyvinyl alcohol electrospun composite nanofibres

    Article • Carbohydrate Polymers, April 2015, Elsevier

    Dr Niranjan Patra

  10. Synthesis of Biopolymer-Derived Zirconium Carbide Powder by Facile One-Pot Reaction

    Article • Journal of the American Ceramic Society, November 2014, Wiley

    Dr Niranjan Patra

  11. Taguchi method optimization of wax production from pyrolysis of waste polypropylene

    Article • Journal of Thermal Analysis and Calorimetry, April 2014, Springer Science + Business Media

    Dr Niranjan Patra

  12. Investigating the thermal properties of polyethylene plasma modified by using unconventional chemical vapors

    Article • Journal of Thermal Analysis and Calorimetry, March 2014, Springer Science + Business Media

    Dr Niranjan Patra

  13. Surfactant-induced thermomechanical and morphological changes in TiO2-polystyrene nanocomposites

    Article • Journal of Colloid and Interface Science, September 2013, Elsevier

    Dr Niranjan Patra

  14. Investigation of plasma-induced thermal, structural and wettability changes on low density polyethylene powder

    Article • Polymer Degradation and Stability, August 2013, Elsevier

    Dr Niranjan Patra

  15. Thermal and mechanical characterization of poly(methyl methacrylate) nanocomposites filled with TiO2 nanorods

    Article • Composites Part B Engineering, December 2012, Elsevier

    Dr Niranjan Patra

  16. Atomic force microscopy nanoindentation of a dental restorative midifill composite

    Article • Dental Materials, February 2012, Elsevier

    Dr Niranjan Patra

  17. Fabrication of large-area ordered and reproducible nanostructures for SERS biosensor application

    Article • The Analyst, January 2012, Royal Society of Chemistry

    Dr Niranjan Patra

  18. Preparation and characterization of a BisGMA-resin dental restorative composites with glass, silica and titania fillers

    Article • Dental Materials Journal, January 2012, Japanese Society for Dental Materials and Devices

    Dr Niranjan Patra

  19. Combined Effect of Polishing on Surface Morphology and Elastic Properties of a Commercial Dental Restorative Resin Composite

    Article • Science of Advanced Materials, January 2012, American Scientific Publishers

    Dr Niranjan Patra

  20. Effect of solvents on the dynamic viscoelastic behavior of poly(methyl methacrylate) film prepared by solvent casting

    Article • Journal of Materials Science, August 2011, Springer Science + Business Media

    Dr Niranjan Patra

  21. Study of dynamic viscoelastic behavior of polystyrene films on addition of oleic acid

    Article • Microelectronic Engineering, August 2011, Elsevier

    Dr Niranjan Patra

  22. Anodization of aluminium coated atomic force microscopy microcantilevers for conversion of the coating into nanoporous alumina

    Article • Microelectronic Engineering, August 2011, Elsevier

    Dr Niranjan Patra

  23. Improvement of thermal stability of poly(methyl methacrylate) by incorporation of colloidal TiO2 nanorods

    Article • Polymer Degradation and Stability, July 2011, Elsevier

    Dr Niranjan Patra

  24. Solvent effects on the thermal and mechanical properties of poly(methyl methacrylate) casted from concentrated solutions

    Article • Advances in Polymer Technology, February 2011, Wiley

    Dr Niranjan Patra

  25. AFM measurement of the stiffness of layers of agarose gel patterned with polylysine

    Article • Microscopy Research and Technique, January 2010, Wiley

    Dr Niranjan Patra

  26. Atomic force microscopy in vitro study of surface roughness and fractal character of a dental restoration composite after air-polishing

    Article • BioMedical Engineering OnLine, January 2010, Springer Science + Business Media

    Dr Niranjan Patra

  27. Increased growth rate of anodic porous alumina by use of ionic liquid as electrolyte additive

    Article • Materials Letters, August 2009, Elsevier

    Dr Niranjan Patra

  28. Use of Ionic Liquid in Fabrication, Characterization, and Processing of Anodic Porous Alumina

    Article • Nanoscale Research Letters, May 2009, Springer Science + Business Media

    Dr Niranjan Patra

  29. Thermal and Mechanical Characterization of PMMA TiO2 Nanocomposites

    Article • Advanced Materials Research, April 2009, Trans Tech Publications

    Dr Niranjan Patra

  30. WITHDRAWN: Influence of Process Parameters of Electroless Nickel-Phosphorous Coating on Carbon Fibers

    Article • Journal of Materials Processing Technology, November 2007, Elsevier

    Dr Niranjan Patra