All Stories

  1. A constraint-free mixed Chebyshev finite element framework via direct trace registration for shell and structural–acoustic problems
  2. Data-driven surrogate modeling for rapid hydroelastic performance prediction of very large floating structures with modular raft wave energy converters
  3. A Zigzag-enhanced CS-MITC3 shell element capturing auxetic behavior in honeycomb sandwich structures with graphene platelet-reinforced face sheets
  4. Variational energy-embedded physics-informed neural network framework with analytic lifting for transient radial heat conduction
  5. A variational physics-informed neural network framework for upper-bound plastic limit analysis of Mindlin plates
  6. SeqBattNet: A discrete-state physics-informed neural network with aging adaptation for battery modeling
  7. Faithfulness-audited LLM alerting for multi-scale SCADA-based anomaly detection and subsystem localization in wind turbines
  8. A cell-based smoothed MITC3 element with explicit zigzag representation for nonlinear analysis of laminated composites
  9. Advanced finite element model for nonlinear response of thin perovskite solar cell plates under thermal conditions
  10. Variational energy-embedded multiphysics informed neural network framework for nonlinear bending, free vibration, and buckling of magneto-electro-elastic plates
  11. Energy-embedded neural network mechanics with zigzag kinematics for bending and sequential extraction of vibration spectra in heterogeneous laminated composites
  12. Efficient 3D Chebyshev-based high-order finite element formulation for pyro effect-dominated thermo-magneto-electro-elastic structures
  13. An Efficient Physics-Guided Extreme Gradient Boosting Model for Axial Capacity Prediction of Circular CFDST Columns
  14. Hybrid Chebyshev and zig-zag finite element framework for viscoelastic analysis of laminated composites with hygrothermal conditions
  15. Artificial Neural Network and Reliability-Based Design of Concrete Beams Reinforced by FRP Bars
  16. Data-Driven Multi-Objective Optimization for Sustainable High-Performance Concrete Design Toward Net-Zero Emissions
  17. A unified multiphysics Chebyshev finite element framework for fully coupled plate–cavity dynamics control of multiphase composite laminate
  18. Integrating reaction-diffusion equations with a dynamic body-fitted trimmed mesh technique for level set-based structural optimization
  19. Hybrid active-passive control of multiphase composite shells through high-order Chebyshev frequency response modeling
  20. Unified surrogate model based optimization approach for Pareto fronts of the multi-physical interactive laminated nanocomposite plate
  21. High-order Chebyshev finite element for efficient stability assessment of tunnel structures
  22. Retraction notice to “Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics” [Constr. Build. Mater. 267 (2021) 120886]
  23. Advanced numerical modeling for nonlinear responses of sandwich multiphase composite plates with viscoelastic damping core
  24. Flexural Behavior of Beams Reinforced with FRP Bars: Test Database, Design Guideline Assessment, and Reliability Evaluation
  25. Data-driven surrogate modeling of seismic uplift capacity for strip anchors in frictional–cohesive soils with surcharge using isogeometric analysis
  26. Numerical hydrodynamic analysis and optimization of modular oscillating wave surge converters
  27. State-of-the-Art Review of Studies on the Flexural Behavior and Design of FRP-Reinforced Concrete Beams
  28. Buckling analysis of laminated multiphase composite plates under in-plane loading using data-driven soft computing
  29. Hydrodynamic analysis and optimization of a retractable oscillating wave surge converter
  30. Predicting the uplift capacity of circular anchors in frictional-cohesive soils using Kolmogorov-Arnold networks
  31. A multi-field coupled data-driven surrogate approach for multiphysical damage diagnostic of energy harvesting composite plates
  32. A multiscale and multiphysical numerical approach for sandwich multiphase hybrid fiber plates with smart composite facesheets
  33. A novel closed-form solution for circular tunnels in cohesive-frictional soils using isogeometric analysis, upper bound limit analysis, and soft computing
  34. Enhancement of MITC3+ flat shell element using curvature corrections
  35. Anatomy-specific two-stage YOLOv8 approach for improved coronary segmentation using the ARCADE dataset
  36. Modelling and Analysis of Multilayer Porous FG-GPRC Plates Using Zigzag Function and Cell-Based Smoothed-Discrete Shear Gap Method
  37. Hydroelastic Analysis of Pontoon-Type Very Large Floating Structures with Multiple Perforated Barrier Attachments
  38. A quasi-3D SinZZ model-driven multi-field Chebyshev FEM for nonlinear vibration control in multilayer multiferroic composite plates
  39. Evaluation of shear strength models for ETS-FRP-retrofitted beams subjected to shear-critical failure
  40. Simultaneous identification of structural joint and member damage in semi-rigid frames using expanded FRF data
  41. Optimizing flexural strength of RC beams with recycled aggregates and CFRP using machine learning models
  42. Hybrid deep learning and isogeometric analysis for bearing capacity assessment of sand over clay
  43. Predicting the friction angle of clays using a multi-layer perceptron neural network enhanced by yeo-johnson transformation and coral reefs optimization
  44. Synergistic integration of isogeometric analysis and data-driven modeling for enhanced strip footing design on two-layered clays: Advancing geotechnical engineering practices
  45. An effective optimum design for passive viscous damping control using FVDs/VWDs in multi-story buildings
  46. An extension of composite bending strain κMITC3+ scheme in analysis of shell structures reinforced with rib stiffeners
  47. A new circulation in glycolysis of polyethylene terephthalate using MOF-based catalysts for environmental sustainability of plastic
  48. A local–global optimization approach for maximizing the multiphysics frequency response of laminated functionally graded CNTs reinforced magneto-electro-elastic plates
  49. A deep neural network based surrogate model for damage identification in full-scale structures with incomplete noisy measurements
  50. Undrained sinkhole stability of circular cavity: a comprehensive approach based on isogeometric analysis coupled with machine learning
  51. A NURBS-based IGA using zig-zag plate theory for nonlinear passive/semi-active damping analysis of laminated FG-CNTRC plates
  52. A multi-physical coupling isogeometric formulation for nonlinear analysis and smart control of laminated CNT-MEE plates
  53. Free vibration analysis of functionally graded shallow shells with variable thickness and physical neutral surface effects
  54. An improved MITC3 element for vibration response analysis of piezoelectric functionally graded porous plates
  55. Multi-objective optimization for free vibration of L-shaped bi-functionally graded sandwich plates using an effective finite element method and non-dominated sorting genetic algorithm II
  56. Probabilistic damage identification of FGM structures using model updating procedure based on expansion of incomplete FRF data
  57. An electromechanical coupling isogeometric approach using zig-zag function for modeling and smart damping control of multilayer PFG-GPRC plates
  58. A data-driven based method for damage detection of combining joints and elements of frame structures using noisy incomplete data
  59. Flexural–shear deformation theory (FSDT) for modeling of mechanical responses of RC beams strengthened in shear with ETS-FRP bars
  60. Coupling isogeometric analysis with deep learning for stability evaluation of rectangular tunnels
  61. Free vibration analysis of a skew sandwich plate with bamboo biocomposite and polylactic acid core under temperature and moisture conditions
  62. Free vibration analysis of functionally graded porous curved nanobeams on elastic foundation in hygro-thermo-magnetic environment
  63. Optimization Design of Laminated Functionally Carbon Nanotube-Reinforced Composite Plates Using Deep Neural Networks and Differential Evolution
  64. Hybrid control of laminated FG-CNTRC shell structures using an advanced smoothed finite element approach based on zig-zag theory
  65. A chaos game Optimization-based model updating technique for structural damage identification under incomplete noisy measurements and temperature variations
  66. Globally automatic fuzzy clustering for probability density functions and its application for image data
  67. Alpha (α) assumed rotations and shear strains for spatially isotropic polygonal Reissner-Mindlin plate elements (αARS-Poly)
  68. Effect of radiofrequency coil and primary magnetic field on radiolucent composite plates
  69. Damage Identification of Functionally Graded Beams using Modal Flexibility Sensitivity-based Damage Index
  70. A novel finite element formulation for static bending analysis of functionally graded porous sandwich plates
  71. Evaluation of residual flexural strength of corroded reinforced concrete beams using convolutional long short-term memory neural networks
  72. A smoothed finite element formulation using zig-zag theory for hybrid damping vibration control of laminated functionally graded carbon nanotube reinforced composite plates
  73. Energy consumption prediction of air-conditioning systems in eco-buildings using hunger games search optimization-based artificial neural network model
  74. Balance-driven automatic clustering for probability density functions using metaheuristic optimization
  75. Prediction of axial load bearing capacity of PHC nodular pile using Bayesian regularization artificial neural network
  76. Frequency response analysis of edge-cracked magneto-electro-elastic functionally graded plates using extended finite element method
  77. Geometrically Nonlinear Study of Functionally Graded Saturated Porous Plates Based on Refined Shear Deformation Plate Theory and Biot’s Theory
  78. Smoothed finite element approach for viscoelastic behaviors of general shell structures
  79. Free vibration characteristic analysis of functionally graded shells with porosity and neutral surface effects
  80. Geometrically nonlinear behavior of two-directional functionally graded porous plates with four different materials
  81. A finite element level-set method for stress-based topology optimization of plate structures
  82. An effective framework for real-time structural damage detection using one-dimensional convolutional gated recurrent unit neural network and high performance computing
  83. Multi-objective optimization of the active constrained layer damping for smart damping treatment in magneto-electro-elastic plate structures
  84. Analysis and optimal control of smart damping for porous functionally graded magneto-electro-elastic plate using smoothed FEM and metaheuristic algorithm
  85. Analysis and prediction of diaphragm wall deflection induced by deep braced excavations using finite element method and artificial neural network optimized by metaheuristic algorithms
  86. Effects of partially supported elastic foundation on free vibration of FGP plates using ES-MITC3 elements
  87. Optimization of haulage-truck system performance for ore production in open-pit mines using big data and machine learning-based methods
  88. Joint damage detection of structures with noisy data by an effective deep learning framework using autoencoder-convolutional gated recurrent unit
  89. Multi-Objective Optimization of Laminated Functionally Graded Carbon Nanotube-Reinforced Composite Plates Using Deep Feedforward Neural Networks-NSGAII Algorithm
  90. Influence of porosity distribution on nonlinear free vibration and transient responses of porous functionally graded skew plates
  91. Free vibration analysis of nanoplates with auxetic honeycomb core using a new third-order finite element method and nonlocal elasticity theory
  92. A deep feed-forward neural network for damage detection in functionally graded carbon nanotube-reinforced composite plates using modal kinetic energy
  93. Size-dependent analysis of functionally graded carbon nanotube-reinforced composite nanoshells with double curvature based on nonlocal strain gradient theory
  94. Predicting load capacity of shear walls using SVR–RSM model
  95. Characteristics of the flow around four cylinders of various shapes
  96. Simulation of the ultimate conditions of fibre-reinforced polymer confined concrete using hybrid intelligence models
  97. Hybrid fitting-numerical method for determining strain-hardening behavior of sheet metals
  98. Modeling and analysis of bi-directional functionally graded nanobeams based on nonlocal strain gradient theory
  99. An effective damage identification procedure using model updating technique and multi-objective optimization algorithm for structures made of functionally graded materials
  100. Bending and hygro-thermo-mechanical vibration analysis of a functionally graded porous sandwich nanoshell resting on elastic foundation
  101. A new efficient two-stage method for damage localization and quantification in shell structures
  102. Prediction of the sorption efficiency of heavy metal onto biochar using a robust combination of fuzzy C-means clustering and back-propagation neural network
  103. An analytical approach to the nonlinear buckling behavior of axially compressed auxetic-core cylindrical shells with carbon nanotube-reinforced coatings
  104. Engineering Design of Battery Module for EVs: Comprehensive Framework Development Based on DFT, Topology Optimization, Machine Learning, Multidisciplinary Design Optimization and Digital Twins
  105. A nonlocal quasi-3D theory for thermal free vibration analysis of functionally graded material nanoplates resting on elastic foundation
  106. Novel efficient method for structural reliability analysis using hybrid nonlinear conjugate map-based support vector regression
  107. Prediction of gas yield generated by energy recovery from municipal solid waste using deep neural network and moth-flame optimization algorithm
  108. A hybrid Laplace‐Galerkin method for thermo‐hydro‐mechanical coupling in fluid saturated porous media: Application for borehole problems
  109. Fourier transform approach to nonperiodic boundary value problems in porous conductive media
  110. Optimization of dynamic properties for laminated multiphase nanocomposite sandwich conical shell in thermal and magnetic conditions
  111. Multi-phase-field modelling of the elastic and buckling behaviour of laminates with ply cracks
  112. Static and free vibration analyses of functionally graded porous variable-thickness plates using an edge-based smoothed finite element method
  113. Stochastic buckling quantification of laminated composite plates using cell-based smoothed finite elements
  114. Applying nonlocal strain gradient theory to size-dependent analysis of functionally graded carbon nanotube-reinforced composite nanoplates
  115. Nonlocal operator method for the Cahn-Hilliard phase field model
  116. An Efficient Modified AZPRP Conjugate Gradient Method for Large-Scale Unconstrained Optimization Problem
  117. An Effective Deep Neural Network Method for Prediction of Battery State at Cell and Module Level
  118. Hybrid regression and machine learning model for predicting ultimate condition of FRP-confined concrete
  119. Modeling the nonlinear behavior of ACC for SCFST columns using experimental-data and a novel evolutionary-algorithm
  120. A novel approach for classification of soils based on laboratory tests using Adaboost, Tree and ANN modeling
  121. Advanced intelligence frameworks for predicting maximum pitting corrosion depth in oil and gas pipelines
  122. Burst capacity and development of interaction rules for pipelines considering radial interacting corrosion defects
  123. Dynamic stability control of viscoelastic nanocomposite piezoelectric sandwich beams resting on Kerr foundation based on exponential piezoelasticity theory
  124. Multi-objective optimization of multi-directional functionally graded beams using an effective deep feedforward neural network-SMPSO algorithm
  125. A comparative study of different dynamic condensation techniques applied to multi-damage identification of FGM and FG-CNTRC plates
  126. Potential efficacy and application of a new statistical meta based-model to predict TBM performance
  127. A two-stage multi-damage detection approach for composite structures using MKECR-Tikhonov regularization iterative method and model updating procedure
  128. Novel hybrid machine leaning model for predicting shear strength of reinforced concrete shear walls
  129. Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method
  130. A higher order coupled frequency characteristics study of smart magneto-electro-elastic composite plates with cut-outs using finite element methods
  131. Improved Levenberg–Marquardt backpropagation neural network by particle swarm and whale optimization algorithms to predict the deflection of RC beams
  132. Nonlinear buckling and post-buckling of imperfect FG porous sandwich cylindrical panels subjected to axial loading under various boundary conditions
  133. Optimization of Load-Carrying Hierarchical Stiffened Shells: Comparative Survey and Applications of Six Hybrid Heuristic Models
  134. Ultra-Wide Spectral Bandwidth and Enhanced Absorption in a Metallic Compound Grating Covered by Graphene Monolayer
  135. Dynamic Stability Analysis in Hybrid Nanocomposite Polymer Beams Reinforced by Carbon Fibers and Carbon Nanotubes
  136. A cell-based smoothed finite element formulation for viscoelastic laminated composite plates considering hygrothermal effects
  137. Ensemble machine learning models based on Reduced Error Pruning Tree for prediction of rainfall-induced landslides
  138. Coupling RBF neural network with ensemble learning techniques for landslide susceptibility mapping
  139. A refreshing view of soft computing models for predicting the deflection of reinforced concrete beams
  140. A robust homogenization method for ageing and non-ageing viscoelastic behavior of early age and hardened cement pastes
  141. Probabilistic investigation on the reliability assessment of mid- and high-strength pipelines under corrosion and fracture conditions
  142. Shape and material optimization for buckling behavior of functionally graded toroidal shells
  143. Bending and free vibration analyses of functionally graded material nanoplates via a novel nonlocal single variable shear deformation plate theory
  144. A new approach for face detection using the maximum function of probability density functions
  145. Reliability Analysis of Stiffened Aircraft Panels Using Adjusting Mean Value Method
  146. A Finite Element Formulation and Nonlocal Theory for the Static and Free Vibration Analysis of the Sandwich Functionally Graded Nanoplates Resting on Elastic Foundation
  147. A unified adaptive approach for membrane structures: Form finding and large deflection isogeometric analysis
  148. Some analytical solutions for fluid flow in and around a single fracture in a porous formation based on singular integral equation
  149. Hybrid nanoparticles migration due to MHD free convection considering radiation effect
  150. Investigation of hybrid nanofluid migration within a porous closed domain
  151. Predictive Modelling and Surface Analysis for Optimization of Production of Biofuel as A Renewable Energy Resource: Proposition of Artificial Neural Network Search
  152. A finite element formulation using four-unknown incorporating nonlocal theory for bending and free vibration analysis of functionally graded nanoplates resting on elastic medium foundations
  153. An effective deep feedforward neural networks (DFNN) method for damage identification of truss structures using noisy incomplete modal data
  154. Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes
  155. Dynamic stability response of truncated nanocomposite conical shell with magnetostrictive face sheets utilizing higher order theory of sandwich panels
  156. Novel probabilistic model for searching most probable point in structural reliability analysis
  157. An ES-MITC3 Finite Element Method Based on Higher-Order Shear Deformation Theory for Static and Free Vibration Analyses of FG Porous Plates Reinforced by GPLs
  158. Prediction of slope failure in open-pit mines using a novel hybrid artificial intelligence model based on decision tree and evolution algorithm
  159. Nonlinear vibration of full-filled fluid corrugated sandwich functionally graded cylindrical shells
  160. Machine learning approach for solving inconsistency problems of Li‐ion batteries during the manufacturing stage
  161. A thermo-mechanical meso-scale lattice model to describe the transient thermal strain and to predict the attenuation of thermo-mechanical properties at elevated temperature up to 800 °C of concrete
  162. Developing a novel artificial intelligence model to estimate the capital cost of mining projects using deep neural network-based ant colony optimization algorithm
  163. Dynamic Analysis of Sandwich Auxetic Honeycomb Plates Subjected to Moving Oscillator Load on Elastic Foundation
  164. Prediction of maximum pitting corrosion depth in oil and gas pipelines
  165. An Edge-Based Smoothed Finite Element for Free Vibration Analysis of Functionally Graded Porous (FGP) Plates on Elastic Foundation Taking into Mass (EFTIM)
  166. Nonlinear Buckling Behavior of Spiral Corrugated Sandwich FGM Cylindrical Shells Surrounded by an Elastic Medium
  167. A New Analytical Approach for Nonlinear Global Buckling of Spiral Corrugated FG-CNTRC Cylindrical Shells Subjected to Radial Loads
  168. Reliability Analysis of FRP-Confined Concrete at Ultimate using Conjugate Search Direction Method
  169. Extreme Learning Machine Based Prediction of Soil Shear Strength: A Sensitivity Analysis Using Monte Carlo Simulations and Feature Backward Elimination
  170. Ensemble modeling of landslide susceptibility using random subspace learner and different decision tree classifiers
  171. A Novel Hybrid Soft Computing Model Using Random Forest and Particle Swarm Optimization for Estimation of Undrained Shear Strength of Soil
  172. Dynamic buckling optimization of laminated aircraft conical shells with hybrid nanocomposite martial
  173. Fuzzy reliability analysis of nanocomposite ZnO beams using hybrid analytical-intelligent method
  174. Hybrid intelligent method for fuzzy reliability analysis of corroded X100 steel pipelines
  175. Modeling of heat transfer augmentation due to complex-shaped turbulator using nanofluid
  176. Solidification inside a clean energy storage unit utilizing phase change material with copper oxide nanoparticles
  177. Deterministic and reliability-based lightweight design of Timoshenko composite beams
  178. A Comparative Study of Different Machine Learning Algorithms in Predicting the Content of Ilmenite in Titanium Placer
  179. A hybrid sufficient performance measure approach to improve robustness and efficiency of reliability-based design optimization
  180. A FE model updating technique based on SAP2000-OAPI and enhanced SOS algorithm for damage assessment of full-scale structures
  181. Numerical study for nanofluid behavior inside a storage finned enclosure involving melting process
  182. Optimisation of nanocomposite pipes under internal fluid reinforced by FRP and CNTs under seismic load
  183. Predicting Blast-Induced Ground Vibration in Open-Pit Mines Using Vibration Sensors and Support Vector Regression-Based Optimization Algorithms
  184. Prediction of Rock Size Distribution in Mine Bench Blasting Using a Novel Ant Colony Optimization-Based Boosted Regression Tree Technique
  185. Influence of active constrained layer damping on the coupled vibration response of functionally graded magneto-electro-elastic plates with skewed edges
  186. Simulation of triplex-tube heat storage including nanoparticles, solidification process
  187. A Novel Artificial Intelligence Technique to Estimate the Gross Calorific Value of Coal Based on Meta-Heuristic and Support Vector Regression Algorithms
  188. SVR-RSM: a hybrid heuristic method for modeling monthly pan evaporation
  189. Isogeometric size optimization of bi-directional functionally graded beams under static loads
  190. Simulation of nanomaterial turbulent modeling in appearance of compound swirl device concerning exergy drop
  191. Energy storage simulation involving NEPCM solidification in appearance of fins
  192. Buckling and postbuckling of porous cylindrical shells with functionally graded composite coating under torsion in thermal environment
  193. Reliability analysis of corroded pipelines: Novel adaptive conjugate first order reliability method
  194. Prediction of Blast-Induced Ground Vibration in Open-Pit Mines Using a New Technique Based on Imperialist Competitive Algorithm and M5Rules
  195. Toward a State-of-the-Art of Fly-Rock Prediction Technology in Open-Pit Mines Using EANNs Model
  196. Simulation of turbulent flow of nanofluid due to existence of new effective turbulator involving entropy generation
  197. Analysis on the heat storage unit through a Y-shaped fin for solidification of NEPCM
  198. Influence of interphase on the multi-physics coupled frequency of three-phase smart magneto-electro-elastic composite plates
  199. On the effective viscoelastic properties of a fractured rock mass
  200. Nanomaterial treatment due to imposing MHD flow considering melting surface heat transfer
  201. UML diagrams for dynamical monitoring of rail vehicles
  202. Experimental evaluation of the mechanical and thermal properties of 3D printed PLA and its composites
  203. Microstructure and inertial effects on natural convection micropolar nanofluid flow about a solid sphere
  204. Mechanical characterization of the Poly lactic acid (PLA) composites prepared through the Fused Deposition Modelling process
  205. Magnetohydrodynamic nanofluid radiative thermal behavior by means of Darcy law inside a porous media
  206. Investigation of nanofluid conduction heat transfer within a triplex tube considering solidification
  207. Thermomechanical postbuckling of functionally graded graphene-reinforced composite laminated toroidal shell segments surrounded by Pasternak’s elastic foundation
  208. CVFEM modeling for nanofluid behavior involving non-equilibrium model and Lorentz effect in appearance of radiation
  209. Numerical simulation for turbulent flow in a tube with combined swirl flow device considering nanofluid exergy loss
  210. Nonlinear Instability Analysis of Functionally Graded Sandwich Truncated Conical Shells Reinforced by Stiffeners Resting on Elastic Foundations
  211. Reliability-based structural design optimization: hybridized conjugate mean value approach
  212. A finite element–based assessment of free vibration behaviour of circular and annular magneto-electro-elastic plates using higher order shear deformation theory
  213. A comprehensive review on analysis of nanocomposites: from manufacturing to properties characterization
  214. Nonlinear thermo-mechanical buckling of higher-order shear deformable porous functionally graded material plates reinforced by orthogonal and/or oblique stiffeners
  215. Nonlinear buckling and postbuckling of sandwich FGM cylindrical shells reinforced by spiral stiffeners under torsion loads in thermal environment
  216. Nanoparticle application for heat transfer and irreversibility analysis in an air conditioning unit
  217. Nonlinear Stability of Sandwich Functionally Graded Cylindrical Shells with Stiffeners Under Axial Compression in Thermal Environment
  218. An effective optimization-based parameterized interval analysis approach for static structural response with multiple uncertain parameters
  219. Two-Stage Structural Damage Assessment by Combining Modal Kinetic Energy Change with Symbiotic Organisms Search
  220. A Type of Novel Nonlinear Distributions for Improving Significantly the Stiffness of Carbon Nanotubes Reinforced Composite Beams
  221. Structural damage assessment with incomplete and noisy modal data using model reduction technique and LAPO algorithm
  222. Steady laminar natural convection of nanofluid under the impact of magnetic field on two-dimensional cavity with radiation
  223. Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures
  224. Nonlinear Thermo-Mechanical Stability Analysis of Eccentrically Spiral Stiffened Sandwich Functionally Graded Cylindrical Shells Subjected to External Pressure
  225. An Effective Couple Method for Reliability-Based Multi-Objective Optimization of Truss Structures with Static and Dynamic Constraints
  226. Second Law Analysis of Unsteady MHD Viscous Flow over a Horizontal Stretching Sheet Heated Non-Uniformly in the Presence of Ohmic Heating: Utilization of Gear-Generalized Differential Quadrature Method
  227. An Efficient Hybrid Optimization Approach Using Adaptive Elitist Differential Evolution and Spherical Quadratic Steepest Descent and Its Application for Clustering
  228. Closed-form solution for nonlinear buckling analysis of FG-CNTRC cylindrical shells with initial geometric imperfections
  229. Mechanical stability of metal foam cylindrical shells with various porosity distributions
  230. Static and Free Vibration Analysis of Stiffened Flat Shells by a Cell-Based Smoothed Discrete Shear Gap Method (CS-FEM-DSG3) Using Three-Node Triangular Elements
  231. An Immersed Boundary Proper Generalized Decomposition (IB-PGD) for Fluid–Structure Interaction Problems
  232. Elastic buckling and free vibration analyses of porous-cellular plates with uniform and non-uniform porosity distributions
  233. An efficient combination of multi-objective evolutionary optimization and reliability analysis for reliability-based design optimization of truss structures
  234. Geometry of principal stress trajectories for a Tresca material under axial symmetry
  235. Static and Free Vibration Analyses of Functionally Graded Carbon Nanotube Reinforced Composite Plates using CS-DSG3
  236. A Semi-analytic Stress Solution for Elastic/Plastic FGM Discs Subject to External Pressure
  237. An Efficient Method of Finding Stress Solutions in Porous Material under Axial Symmetry
  238. An efficient approach for optimal sensor placement and damage identification in laminated composite structures
  239. Damage assessment in truss structures with limited sensors using a two-stage method and model reduction
  240. An isogeometric approach for dynamic response of laminated FG-CNT reinforced composite plates integrated with piezoelectric layers
  241. Damage assessment in plate-like structures using a two-stage method based on modal strain energy change and Jaya algorithm
  242. Free vibration analysis of laminated FG-CNT reinforced composite beams using finite element method
  243. Free vibration analysis of corrugated panels using homogenization methods and a cell-based smoothed Mindlin plate element (CS-MIN3)
  244. A global single-loop deterministic approach for reliability-based design optimization of truss structures with continuous and discrete design variables
  245. Ideal flow theory for the double – shearing model as a basis for metal forming design
  246. A path following method for identifying static equilibrium in multi-body-dynamic systems
  247. Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3)
  248. An Artificial Neural Network-Based Optimization of Stiffened Composite Plate Using A New Adjusted Differential Evolution Algorithm
  249. A Differential Evolution-Based Clustering for Probability Density Functions
  250. Frequency optimization of laminated functionally graded carbon nanotube reinforced composite quadrilateral plates using smoothed FEM and evolution algorithm
  251. An efficient coupled numerical method for reliability-based design optimization of steel frames
  252. An efficient multi-stage optimization approach for damage detection in plate structures
  253. Efficiency of Jaya algorithm for solving the optimization-based structural damage identification problem based on a hybrid objective function
  254. Static response and free vibration of functionally graded carbon nanotube-reinforced composite rectangular plates resting on Winkler–Pasternak elastic foundations
  255. Thermomechanical buckling and post-buckling of cylindrical shell with functionally graded coatings and reinforced by stringers
  256. Nitrogen Trapping Ability of Hydrogen-Induced Vacancy and the Effect on the Formation of AlN in Aluminum
  257. A multi-scale homogenization approach for the effective thermal conductivity of dry lime–hemp concrete
  258. Novel fuzzy sliding controller for MRD suspensions subjected to uncertainty and disturbance
  259. Multi-objective optimization of laminated composite beam structures using NSGA-II algorithm
  260. A combination of damage locating vector method (DLV) and differential evolution algorithm (DE) for structural damage assessment
  261. Analysis and control of FGM plates integrated with piezoelectric sensors and actuators using cell-based smoothed discrete shear gap method (CS-DSG3)
  262. Modified genetic algorithm-based clustering for probability density functions
  263. A two-stage assessment method using damage locating vector method and differential evolution algorithm for damage identification of cross-ply laminated composite beams
  264. An Extended Cell-Based Smoothed Three-Node Mindlin Plate Element (XCS-MIN3) for Free Vibration Analysis of Cracked FGM Plates
  265. Buckling analysis of non-uniform thickness nanoplates in an elastic medium using the isogeometric analysis
  266. Analyses of Stiffened Plates Resting on Viscoelastic Foundation Subjected to a Moving Load by a Cell-Based Smoothed Triangular Plate Element
  267. A global numerical approach for lightweight design optimization of laminated composite plates subjected to frequency constraints
  268. A generalized beta finite element method with coupled smoothing techniques for solid mechanics
  269. Backtracking Search Optimization Algorithm and its Application to Roller Bearing Fault Diagnosis
  270. A new design approach based on differential evolution algorithm for geometric optimization of magnetorheological brakes
  271. Effects of variable thickness and imperfection on nonlinear buckling of sigmoid-functionally graded cylindrical panels
  272. Effect of stiffeners on nonlinear buckling of cylindrical shells with functionally graded coatings under torsional load
  273. A software framework for probabilistic sensitivity analysis for computationally expensive models
  274. A new energy indicator in damage locating vector method (DLV) for detecting multiple damaged positions in beam and truss structures
  275. Optimal design of truss structures with frequency constraints using improved differential evolution algorithm based on an adaptive mutation scheme
  276. An improved differential evolution based on roulette wheel selection for shape and size optimization of truss structures with frequency constraints
  277. A two-step approach for damage detection in laminated composite structures using modal strain energy method and an improved differential evolution algorithm
  278. Optimization of laminated composite plates for maximizing buckling load using improved differential evolution and smoothed finite element method
  279. A new approach for nonlinear dynamic buckling of S-FGM toroidal shell segments with axial and circumferential stiffeners
  280. A new approach for determining the prior probabilities in the classification problem by Bayesian method
  281. Closed-form expression for nonlinear analysis of imperfect sigmoid-FGM plates with variable thickness resting on elastic medium
  282. Smoothed Finite Element Methods
  283. An adaptive elitist differential evolution for optimization of truss structures with discrete design variables
  284. An effective reliability-based improved constrained differential evolution for reliability-based design optimization of truss structures
  285. A non-ordinary state-based peridynamics formulation for thermoplastic fracture
  286. Damage Detection in Laminated Composite Plates Using Modal Strain Energy and Improved Differential Evolution Algorithm
  287. Damage assessment of laminated composite beam structures using damage locating vector (DLV) method
  288. Uncertainty quantification of the fracture properties of polymeric nanocomposites based on phase field modeling
  289. An extended cell-based smoothed discrete shear gap method (XCS-FEM-DSG3) for free vibration analysis of cracked Reissner-Mindlin shells
  290. An improved constrained differential evolution using discrete variables (D-ICDE) for layout optimization of truss structures
  291. Static and free vibration analyses of stiffened folded plates using a cell-based smoothed discrete shear gap method (CS-FEM-DSG3)
  292. Static and frequency optimization of folded laminated composite plates using an adjusted Differential Evolution algorithm and a smoothed triangular plate element
  293. Geometric effects on mixing performance in a novel passive micromixer with trapezoidal-zigzag channels
  294. Development of the Cell-based Smoothed Discrete Shear Gap Plate Element (CS-FEM-DSG3) using Three-Node Triangles
  295. An upper-bound limit analysis of Mindlin plates using CS-DSG3 method and second-order cone programming
  296. A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) for dynamic response of laminated composite plate subjected to blast loading
  297. Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS
  298. A novel design of passive split and recombination micromixer with trapezoidal zigzag channels
  299. An edge-based smoothed finite element method (ES-FEM) for dynamic analysis of 2D Fluid-Solid interaction problems
  300. A cell-based smoothed three-node Mindlin plate element (CS-FEM-MIN3) based on the C0-type higher-order shear deformation for geometrically nonlinear analysis of laminated composite plates
  301. Computational Methods for Fracture 2015
  302. A coupled alpha-FEM for dynamic analyses of 2D fluid–solid interaction problems
  303. An Edge-Based Smoothed Discrete Shear Gap Method Using theC0-Type Higher-Order Shear Deformation Theory for Analysis of Laminated Composite Plates
  304. Free vibration analysis of cracked Mindlin plate using an extended cell-based smoothed discrete shear gap method (XCS-DSG3)
  305. Geometrically nonlinear analysis of composite plates and shells via a quadrilateral element with good coarse-mesh accuracy
  306. IJCM SPECIAL ISSUE ACOME 2012
  307. A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise theory based on the C0-HSDT for analyses of composite plates
  308. A cell-based smoothed finite element method using three-node shear-locking free Mindlin plate element (CS-FEM-MIN3) for dynamic response of laminated composite plates on viscoelastic foundation
  309. An edge-based smoothed three-node mindlin plate element (ES-MIN3) for static and free vibration analyses of plates
  310. A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) based on the C0 -type higher-order shear deformation theory for dynamic responses of Mindlin plates on viscoelastic foundations subjected to a moving sprung vehicle
  311. A cell-based smoothed discrete shear gap method (CS-FEM-DSG3) using layerwise deformation theory for dynamic response of composite plates resting on viscoelastic foundation
  312. A smoothed coupled NS/nES-FEM for dynamic analysis of 2D fluid–solid interaction problems
  313. Static and free vibration analyses of composite and sandwich plates by an edge-based smoothed discrete shear gap method (ES-DSG3) using triangular elements based on layerwise theory
  314. Geometrically nonlinear analysis of functionally graded plates using a cell-based smoothed three-node plate element (CS-MIN3) based on the C0-HSDT
  315. DYNAMIC ANALYSIS OF MINDLIN PLATES ON VISCOELASTIC FOUNDATIONS UNDER A MOVING VEHICLE BY CS-MIN3 BASED ON C0-TYPE HIGHER-ORDER SHEAR DEFORMATION THEORY
  316. A limit analysis of Mindlin plates using the cell-based smoothed triangular element CS-MIN3 and second-order cone programming (SOCP)
  317. Isogeometric finite element analysis of composite sandwich plates using a higher order shear deformation theory
  318. An effective algorithm for reliability-based optimization of stiffened Mindlin plate
  319. A cell-based smoothed discrete shear gap method (CS-DSG3) based on the C0-type higher-order shear deformation theory for static and free vibration analyses of functionally graded plates
  320. A cell-based smoothed discrete shear gap method (CS-DSG3) using triangular elements for static and free vibration analyses of shell structures
  321. Static, free vibration and buckling analyses of stiffened plates by CS-FEM-DSG3 using triangular elements
  322. Static and free vibration analyses and dynamic control of composite plates integrated with piezoelectric sensors and actuators by the cell-based smoothed discrete shear gap method (CS-FEM-DSG3)
  323. AN APPLICATION OF THE ES-FEM IN SOLID DOMAIN FOR DYNAMIC ANALYSIS OF 2D FLUID–SOLID INTERACTION PROBLEMS
  324. AN EDGE-BASED SMOOTHED FINITE ELEMENT METHOD FOR ANALYSIS OF LAMINATED COMPOSITE PLATES
  325. COMPUTATION OF LIMIT LOAD USING EDGE-BASED SMOOTHED FINITE ELEMENT METHOD AND SECOND-ORDER CONE PROGRAMMING
  326. FREE AND FORCED VIBRATION ANALYSIS USING THE n-SIDED POLYGONAL CELL-BASED SMOOTHED FINITE ELEMENT METHOD (nCS-FEM)
  327. Analysis of laminated composite plates using higher-order shear deformation plate theory and node-based smoothed discrete shear gap method
  328. Static, free vibration, and buckling analysis of laminated composite Reissner-Mindlin plates using NURBS-based isogeometric approach
  329. A cell‐based smoothed discrete shear gap method using triangular elements for static and free vibration analyses of Reissner–Mindlin plates
  330. Analysis of functionally graded plates by an efficient finite element method with node-based strain smoothing
  331. A cell-based smoothed three-node Mindlin plate element (CS-MIN3) for static and free vibration analyses of plates
  332. Computation of limit and shakedown loads using a node-based smoothed finite element method
  333. Analysis of functionally graded plates using an edge-based smoothed finite element method
  334. An adaptive edge-based smoothed point interpolation method for mechanics problems
  335. Adaptive analysis using the node-based smoothed finite element method (NS-FEM)
  336. A variationally consistent αFEM (VCαFEM) for solution bounds and nearly exact solution to solid mechanics problems using quadrilateral elements
  337. About applying directly the alpha finite element method (\(\alpha\)FEM) for solid mechanics using triangular and tetrahedral elements
  338. A theoretical study on the smoothed FEM (S-FEM) models: Properties, accuracy and convergence rates
  339. A node-based smoothed finite element method (NS-FEM) for upper bound solution to visco-elastoplastic analyses of solids using triangular and tetrahedral meshes
  340. A novel singular node-based smoothed finite element method (NS-FEM) for upper bound solutions of fracture problems
  341. A node-based smoothed finite element method with stabilized discrete shear gap technique for analysis of Reissner–Mindlin plates
  342. An edge-based smoothed point interpolation method (ES-PIM) for heat transfer analysis of rapid manufacturing system
  343. An n-sided polygonal edge-based smoothed finite element method (nES-FEM) for solid mechanics
  344. An edge-based smoothed finite element method (ES-FEM) with stabilized discrete shear gap technique for analysis of Reissner–Mindlin plates
  345. ADDITIONAL PROPERTIES OF THE NODE-BASED SMOOTHED FINITE ELEMENT METHOD (NS-FEM) FOR SOLID MECHANICS PROBLEMS
  346. An edge-based smoothed finite element method for visco-elastoplastic analyses of 2D solids using triangular mesh
  347. A face-based smoothed finite element method (FS-FEM) for visco-elastoplastic analyses of 3D solids using tetrahedral mesh
  348. A stabilized smoothed finite element method for free vibration analysis of Mindlin-Reissner plates
  349. About the edge-based smoothed finite element method for the Reissner-Mindlin plate-bending problem
  350. A novel Galerkin-like weakform and a superconvergent alpha finite element method (SαFEM) for mechanics problems using triangular meshes
  351. An edge-based smoothed finite element method for analysis of two-dimensional piezoelectric structures
  352. A face-based smoothed finite element method (FS-FEM) for 3D linear and geometrically non-linear solid mechanics problems using 4-node tetrahedral elements
  353. Assessment of smoothed point interpolation methods for elastic mechanics
  354. On the essence and the evaluation of the shape functions for the smoothed finite element method (SFEM)
  355. A superconvergent point interpolation method (SC-PIM) with piecewise linear strain field using triangular mesh
  356. An edge-based smoothed finite element method (ES-FEM) for static, free and forced vibration analyses of solids
  357. An edge-based smoothed finite element method for primal–dual shakedown analysis of structures
  358. A node-based smoothed finite element method (NS-FEM) for upper bound solutions to solid mechanics problems
  359. A novel alpha finite element method (αFEM) for exact solution to mechanics problems using triangular and tetrahedral elements
  360. A novel FEM by scaling the gradient of strains with factor α (αFEM)
  361. Selective smoothed finite element method
  362. THE UPPER BOUND PROPERTY FOR SOLID MECHANICS OF THE LINEARLY CONFORMING RADIAL POINT INTERPOLATION METHOD (LC-RPIM)
  363. An n-sided polygonal smoothed finite element method (nSFEM) for solid mechanics
  364. Theoretical aspects of the smoothed finite element method (SFEM)
  365. About an approximate method to solve the static boundary value problems in the isotropic hardening elastic-plastic solid
  366. A Smoothed Finite Element Method for Mechanics Problems
  367. Applying the genetic algorithm and the consequential convex approximation programming for composite structure optimization