All Stories

  1. Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties

    Article • Journal of Alloys and Compounds, September 2023, Elsevier

    Mohsen Saboktakin Rizi

  2. Rapid microwave-assisted synthesis and magnetic properties of high-entropy spinel (Cr0.2Mn0.2Fe0.2Co0.2-Ni Zn )3O4 nanoparticles

    Article • Ceramics International, April 2023, Elsevier

    Mohsen Saboktakin Rizi

  3. Effects of molybdenum on hot deformation behavior and microstructural evolution of Fe 40 Mn 40 Co 10 Cr 10 C ...

    Article • Science and Technology of Advanced Materials, March 2023, Taylor & Francis

    Mohsen Saboktakin Rizi

  4. Investigation on Microstructure and Flowability of Gas Atomized Heat-resistant KHR45A Alloy Powders for Additive Manufacturing

    Article • February 2023, The Korean Powder Metallurgy Institute

    Mohsen Saboktakin Rizi

  5. Supporting data for strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation

    Article • Data in Brief, December 2022, Elsevier

    Mohsen Saboktakin Rizi

  6. Strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation

    Article • Materials Science and Engineering A, September 2022, Elsevier

    Mohsen Saboktakin Rizi

  7. Effects of carbon and molybdenum on the nanostructural evolution and strength/ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloys

    Article • Journal of Alloys and Compounds, August 2022, Elsevier

    Mohsen Saboktakin Rizi

  8. Data supporting the hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy

    Article • Data in Brief, June 2022, Elsevier

    Mohsen Saboktakin Rizi

  9. Microstructural evolution, metallurgical reactions, and the mechanical properties of pure titanium and carbon steel sheets bonded via hot-roll diffusion with a nickel interlayer

    Article • Canadian Metallurgical Quarterly, March 2022, Taylor & Francis

    Mohsen Saboktakin Rizi

  10. Formation mechanism of high-entropy spinel thin film and its mechanical and magnetic properties: Linking high-entropy alloy to high-entropy ceramic

    Article • Applied Surface Science, February 2022, Elsevier

    Mohsen Saboktakin Rizi

  11. Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy

    Article • Materials Science and Engineering A, September 2021, Elsevier

    Mohsen Saboktakin Rizi

  12. Effects of temperature on interfacial evolution and mechanical properties of pure titanium and carbon steel sheets bonded via new multi-pass continuous hot-roll diffusion with nickel interlayer

    Article • The International Journal of Advanced Manufacturing Technology, June 2021, Springer Science + Business Media

    Mohsen Saboktakin Rizi

  13. Effect of residual nanocrystals on thermal stability and mechanical properties of metalloid-containing amorphous alloys

    Article • Materials Characterization, March 2021, Elsevier

    Mohsen Saboktakin Rizi

  14. A study on the surface severe plastic deformation and corrosion behavior of an interstitial free steel

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Mohsen Saboktakin Rizi

  15. Inclusions in Continuous Steel Casting: Formation, Characterization, Tracking and Influences on the Quality of the Product

    Article • Advanced Engineering Forum, November 2018, Trans Tech Publications

    Mohsen Saboktakin Rizi

  16. A Comprehensive Study of Diffusion Bonding of Mg AZ31 to Al 5754, Al 6061 and Al 7039 Alloys

    Article • Transactions of the Indian Institute of Metals, September 2018, Springer Science + Business Media

    Mohsen Saboktakin Rizi

  17. The Effect of Time and Temperature of Nitridation-Oxidation Process on Properties and Corrosion Resistance of AISI 316L Steel

    Article • Surface Engineering and Applied Electrochemistry, September 2018, Allerton Press

    Mohsen Saboktakin Rizi

  18. Synthesis of Nono-Crystalline Aluminum Carbide Using Thermal Treatment of Mechanically Activated Al and Graphite Mixture

    Article • Journal of Nano Research, June 2018, Trans Tech Publications

    Mohsen Saboktakin Rizi

  19. Kinetic Studies on the Thermal Synthesis of Fluorapatite: Model Free and Model-Fitting Methods

    Article • Advanced Engineering Forum, June 2018, Trans Tech Publications

    Mohsen Saboktakin Rizi

  20. Effect of Intermetallic Compounds on Microstructure and Mechanical Properties of Hot Roll Bonding Titanium to Steel

    Article • Transactions of the Indian Institute of Metals, April 2018, Springer Science + Business Media

    Mohsen Saboktakin Rizi

  21. Effect of Chlorine Ion on the Corrosion of 316L Austenitic Stainless Steel

    Article • Advanced Engineering Forum, July 2017, Trans Tech Publications

    Mohsen Saboktakin Rizi

  22. Thermal Stability of Nano-Hydroxyapatite Synthesized via Mechanochemical Treatment

    Article • Arabian Journal for Science and Engineering, April 2017, Springer Science + Business Media

    Mohsen Saboktakin Rizi

  23. Microstructural Characterization and Properties of Microalloyed Powder Metallurgy Steels

    Article • Advanced Engineering Forum, June 2016, Trans Tech Publications

    Mohsen Saboktakin Rizi, ali ghaheri

  24. Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding

    Article • Materials Science and Engineering A, June 2016, Elsevier

    Mohsen Saboktakin Rizi

  25. Optimization Electro Discharge Machining of Ti-6Al-4V Alloy with Silicon Carbide Powder Mixed

    Article • Advanced Materials Research, September 2012, Trans Tech Publications

    Mohsen Saboktakin Rizi

  26. The Investigate Metallurgical Properties of Roll BondingTitanium Clad Steel

    Article • International Journal of Applied Physics and Mathematics, January 2011, IACSIT Press

    Mohsen Saboktakin Rizi