Contact

All Stories

  1. An electrochemical study of PCl coatings deposited by fused filament fabrication on Ti-6Al-4V alloy in phosphate-buffered saline solution

    Article • Results in Surfaces and Interfaces, August 2026, Elsevier

    Dr. Mohammad Azadi

  2. Experimental corrosion and computational hemodynamic assessment of a 3D-printed biodegradable stent design

    Article • Materials & Design, July 2026, Elsevier

    Dr. Mohammad Azadi

  3. Effect of 3D-printed PLA Coating on the Wear Characteristics in AM60 Magnesium Alloy

    Article • Results in Engineering, August 2025, Elsevier

    Dr. Mohammad Azadi

  4. Impacts of cell type and strut thickness on bending fatigue lifetime of additive-manufactured PLA-wood parts

    Article • Journal of Materials Research and Technology, August 2025, Elsevier

    Dr. Mohammad Azadi

  5. Evaluation of high-cycle bending fatigue properties and fracture behaviors in AM60 magnesium alloy joints by friction welding

    Article • Forces in Mechanics, August 2025, Elsevier

    Dr. Mohammad Azadi

  6. Fatigue behavior and failure mechanism of 3D-printed continuous glass fiber-reinforced PLA composites under rotating bending fatigue

    Article • Composites Part C Open Access, July 2025, Elsevier

    Dr. Mohammad Azadi

  7. Effect of simulated body fluid on the fatigue resistance of 3D-printed PLA and PLA-wood structures under cyclic bending loading

    Article • International Journal of Fatigue, June 2025, Elsevier

    Dr. Mohammad Azadi

  8. Multi-objective optimization in air-helium Stirling engine under objectives of efficiency, power, heat loss, and cost

    Article • Journal of Engineering Research, June 2025, Elsevier

    Dr. Mohammad Azadi

  9. Shape memory recovery in polylactic acid and thermoplastic polyurethane bi-material metamaterials fabricated by additive manufacturing under fatigue testing

    Article • Polymer Testing, June 2025, Elsevier

    Dr. Mohammad Azadi

  10. The method for impact analyzing of duplex plasma nitriding and DLC coatings on the cyclic performance of 16MnCr5 piston pin steel under plain and fretting fatigue testing

    Article • MethodsX, June 2025, Elsevier

    Dr. Mohammad Azadi

  11. Impact of driving characteristic parameters and vehicle type on fuel consumption and emissions performance over real driving cycles

    Article • PLOS One, January 2025, PLOS

    Mahboobeh Azadi, Dr. Mohammad Azadi

  12. Characterizing Arterial Wall Properties with Plaque and Stent: Elastic, Viscoelastic and Hyper-elastic Models

    Article • International Journal of Engineering, January 2025, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  13. Battery Electric Vehicles: Technologies, Challenges and Future Prospects for Sustainable Transportation

    Article • January 2025, Springer Science + Business Media

    Dr. Mohammad Azadi

  14. Investigating the delamination frequency in 3D-printed PLA-TPU bi-material composite structures under cyclic bending fatigue testing

    Article • Smart Materials & Methods, October 2024, Taylor & Francis

    Dr. Mohammad Azadi

  15. Topology optimization of coronary artery stent considering structural and hemodynamic parameters

    Article • Heliyon, October 2024, Elsevier

    Dr. Mohammad Azadi

  16. A novel machine learning-based model for predicting the transition fatigue lifetime in piston aluminum alloys

    Article • International Journal of Lightweight Materials and Manufacture, September 2024, Elsevier

    Dr. Mohammad Azadi

  17. Impact of biological environment on bending fatigue lifetime in additive-manufactured polylactic acid fabricated by 3D-printing

    Article • Polymer Testing, September 2024, Elsevier

    Dr. Mohammad Azadi

  18. The effect of various treatment parameters in duplex plasma nitrided and diamond-like carbon coating on high-cycle fatigue and fretting fatigue lifetimes of piston pin 16MnCr5 steel

    Article • Applied Surface Science Advances, August 2024, Elsevier

    Dr. Mohammad Azadi

  19. Evaluation of stress-controlled high-cycle fatigue characteristics in PLA-wood fused deposition modeling 3D-printed parts under bending loads

    Article • PLOS One, April 2024, PLOS

    Mahboobeh Azadi, Dr. Mohammad Azadi

  20. Plain and fretting fatigue characteristics of 16MnCr5 steel under cyclic bending loading with the application of engine piston pin

    Article • Materials Chemistry and Physics, April 2024, Elsevier

    Dr. Mohammad Azadi

  21. The influence of 3D-printed PLA coatings on pure and fretting fatigue properties of AM60 magnesium alloys under cyclic bending loads

    Article • Heliyon, April 2024, Elsevier

    Dr. Mohammad Azadi

  22. Interpretation of fatigue lifetime prediction by machine learning modeling in piston aluminum alloys under different manufacturing and loading conditions

    Article • Fracture and Structural Integrity, March 2024, Gruppo Italiano Frattura

    Dr. Mohammad Azadi

  23. Influence of Specimen Geometry and Notch on Fatigue Lifetime and Fracture Behavior of Aluminum-based Nanocomposite Under Stresscontrolled Fully-reversed Bending Loads

    Article • Recent Patents on Nanotechnology, March 2024, Bentham Science Publishers

    Dr. Mohammad Azadi

  24. Impact of Corrosion in Simulated Body Fluid on Fatigue Characteristics of 3D-Printed Polylactic Acid-Coated AM60 Magnesium Alloys

    Article • Surfaces, February 2024, MDPI AG

    Dr. Mohammad Azadi

  25. Optimization of 3D printing parameters in polylactic acid bio-metamaterial under cyclic bending loading considering fracture features

    Article • Heliyon, February 2024, Elsevier

    Dr. Mohammad Azadi

  26. The Effect of 3D-Printed Polylactic Acid Coating Layers on High-Cycle Fatigue Behaviors of AM60 Magnesium Alloys for Additive-Manufactured and Degraded Specimens in Simulated Body Fluid

    Article • December 2023, MDPI AG

    Dr. Mohammad Azadi

  27. Effects of Various Adhesive Layers on Electrochemical Characteristics of 3D-Printed Polylactic Acid Coatings on AM60 Magnesium Alloy

    Article • High Temperature Corrosion of Materials, December 2023, Springer Science + Business Media

    Dr. Mohammad Azadi

  28. High-cycle fatigue testing on AM60 magnesium alloy samples for as-received and pre-corroded conditions in simulated body fluid

    Article • Journal of Materials Research and Technology, November 2023, Elsevier

    Dr. Mohammad Azadi

  29. Topology optimization on metamaterial cells for replacement possibility in non-pneumatic tire and the capability of 3D-printing

    Article • PLOS One, October 2023, PLOS

    Dr. Mohammad Azadi

  30. Impact of 3D-printed PLA coatings on the mechanical and adhesion properties of AM60 magnesium alloys

    Article • Composites Part C Open Access, October 2023, Elsevier

    Dr. Mohammad Azadi

  31. Multi-objective numerical optimization of 3D-printed polylactic acid bio-metamaterial based on topology, filling pattern, and infill density via fatigue lifetime and mass

    Article • PLOS One, September 2023, PLOS

    Mahboobeh Azadi, Dr. Mohammad Azadi

  32. Computational fluid dynamics of coronary arteries with implanted stents: Effects of Newtonian and non‐Newtonian blood flows

    Article • Engineering Reports, September 2023, Wiley

    Dr. Mohammad Azadi

  33. Fracture-based modeling of heat-treated AZ91/AZE911 magnesium alloys for estimating high-cycle fatigue lifetime by Paris crack growth rate and striations spacing

    Article • SN Applied Sciences, July 2023, Springer Science + Business Media

    Dr. Mohammad Azadi

  34. Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

    Article • Fracture and Structural Integrity, June 2023, Gruppo Italiano Frattura

    Dr. Mohammad Azadi

  35. Microscopic study on the effect of nano-clay-particles on wear behaviors of piston aluminum-silicon alloy under various forces and speeds

    Article • Micron, May 2023, Elsevier

    Dr. Mohammad Azadi

  36. Multi-Material Metamaterial Topology Optimization to Minimize the Compliance and the Constraint of Weight: Application of Non-Pneumatic Tire Additive-Manufactured with PLA/TPU Polymers

    Article • Polymers, April 2023, MDPI AG

    Dr. Mohammad Azadi

  37. Compressive strength of metamaterial bones fabricated by 3D printing with different porosities in cubic cells

    Article • Materials Chemistry and Physics, April 2023, Elsevier

    Dr. Mohammad Azadi

  38. Multi-material Metamaterial Topology Optimization to Minimize the Compliance and the Constraint of Weight: Application of Non-pneumatic Tire Additive-manufactured with PLA/TPU Polymers

    Article • March 2023, MDPI AG

    Dr. Mohammad Azadi

  39. Simple‐mix: Thermodynamics modeling in a Gama‐type Stirling engine with a working fluid mixture

    Article • Engineering Reports, March 2023, Wiley

    Dr. Mohammad Azadi

  40. A short evaluation of simultaneous corrosion fretting fatigue behaviors in piston aluminium-silicon alloys considering effects of nano-particles and heat-treating

    Article • International Journal of Fatigue, March 2023, Elsevier

    Dr. Mohammad Azadi

  41. Amazing epsilon-shaped trend for fretting fatigue characteristics in AM60 magnesium alloy under stress-controlled cyclic conditions at bending loads with zero mean stress

    Article • PLOS One, February 2023, PLOS

    Mahboobeh Azadi, Dr. Mohammad Azadi

  42. Evaluation of coronary stents: A review of types, materials, processing techniques, design, and problems

    Article • Heliyon, February 2023, Elsevier

    Dr. Mohammad Azadi

  43. Fatigue crack initiation detection in ductile cast iron crankshaft under rotating bending fatigue test using the acoustic emission entropy method

    Article • Engineering Failure Analysis, February 2023, Elsevier

    Dr. Mohammad Azadi

  44. Raw driving data of passenger cars considering traffic conditions in Semnan city

    Article • Experimental Results, January 2023, Cambridge University Press

    Dr. Mohammad Azadi

  45. Data analysis of striation spacing, lifetime, and crack length in crankshaft ductile cast iron under cyclic bending loading through high-cycle fatigue regime

    Article • Data in Brief, December 2022, Elsevier

    Dr. Mohammad Azadi

  46. Evaluation of hardness and microstructural features in piston aluminum-silicon alloys after different ageing heat treatments

    Article • Results in Materials, December 2022, Elsevier

    Dr. Mohammad Azadi

  47. Analyzing experimental data from reciprocating wear testing on piston aluminum alloys, with and without clay nano-particle reinforcement

    Article • Data in Brief, December 2022, Elsevier

    Dr. Mohammad Azadi

  48. Influence of T6 heat-treating and over-ageing on out-of-phase thermo-mechanical fatigue behaviors of Al-Si-Cu alloy

    Article • Materials Today Communications, December 2022, Elsevier

    Dr. Mohammad Azadi

  49. Fatigue testing on rotary friction-welded joints between solid ABS and 3D-printed PLA and ABS

    Article • European Journal of Mechanics - A/Solids, November 2022, Elsevier

    Dr. Mohammad Azadi

  50. Heat-treating and nano-reinforcing improvements on fretting fatigue properties and fracture behaviors of cylinder head aluminum alloys

    Article • Journal of Materials Research and Technology, September 2022, Elsevier

    Dr. Mohammad Azadi

  51. Experimental bending fatigue data of additive-manufactured PLA biomaterial fabricated by different 3D printing parameters

    Article • Progress in Additive Manufacturing, July 2022, Springer Science + Business Media

    Dr. Mohammad Azadi

  52. A Perspective on Metamaterials for the Biomechanics Application: Multi-Material Metamaterial (4M) Structures

    Article • Materials Science Forum, June 2022, Trans Tech Publications

    Dr. Mohammad Azadi

  53. Development of a duty cycle with K-means clustering technique for hydraulic steering in an instrumented TIBA vehicle

    Article • Transportation Engineering, June 2022, Elsevier

    Dr. Mohammad Azadi

  54. Data analysis for investigating the tribological behaviors of aluminum-silicon alloys

    Article • Data in Brief, June 2022, Elsevier

    Dr. Mohammad Azadi

  55. Bending fatigue behavior of fused filament fabrication 3D-printed ABS and PLA joints with rotary friction welding

    Article • Progress in Additive Manufacturing, May 2022, Springer Science + Business Media

    Dr. Mohammad Azadi

  56. Topology optimization of additive-manufactured metamaterial structures: A review focused on multi-material types

    Article • Forces in Mechanics, May 2022, Elsevier

    Dr. Mohammad Azadi

  57. Micromechanical constitutive modeling of tensile and cyclic behaviors of nano-clay reinforced metal matrix nanocomposites

    Article • Mechanics of Materials, May 2022, Elsevier

    Dr. Mohammad Azadi

  58. Effects of plasma nitriding process on the corrosion behavior of GJS700 nodular cast iron

    Article • Surface Topography Metrology and Properties, April 2022, Institute of Physics Publishing

    Dr. Mohammad Azadi

  59. Cyclic Deformation Behavior and Failure Mechanism of 316LN Stainless Steel under Creep-Fatigue Loading at 550 °C

    Article • Journal of Materials Engineering and Performance, April 2022, Springer Science + Business Media

    Dr. Mohammad Azadi

  60. Data analysis of high-cycle fatigue testing on piston aluminum-silicon alloys under various conditions: Wear, lubrication, corrosion, nano-particles, heat-treating, and stress

    Article • Data in Brief, April 2022, Elsevier

    Dr. Mohammad Azadi

  61. Experimental fatigue dataset for additive-manufactured 3D-printed Polylactic acid biomaterials under fully-reversed rotating-bending bending loadings

    Article • Data in Brief, April 2022, Elsevier

    Dr. Mohammad Azadi

  62. Effect of Heat-Treating on Microstructure and High Cycle Bending Fatigue Behavior of AZ91 and AZE911 Magnesium Alloys

    Article • Advances in Materials Science and Engineering, March 2022, Hindawi Publishing Corporation

    Dr. Mohammad Azadi

  63. Effect of Nano-Clay Particles and Heat Treating on Pure and Fretting Fatigue Properties of Piston Aluminum Alloy under Stress-Controlled Cyclic Bending Loading

    Article • Journal of Materials Engineering and Performance, February 2022, Springer Science + Business Media

    Dr. Mohammad Azadi

  64. Scanning and transmission electron microscopy analysis for surface-modified AM60 magnesium alloy by pulsed electron beam irradiation

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, February 2022, Elsevier

    Dr. Mohammad Azadi

  65. Experimental Bending Fatigue Data of Additive-Manufactured PLA Biomaterial Fabricated by Different 3d Printing Parameters

    Article • January 2022, MDPI AG

    Dr. Mohammad Azadi

  66. Cyclic hardening/softening experimental data in nano-clay-composite and aluminum alloy under high-temperature strain-controlled loading

    Article • Experimental Results, January 2022, Cambridge University Press

    Dr. Mohammad Azadi

  67. Amazing Epsilon-Shaped Trend for Fretting Fatigue Characteristics in Am60 Magnesium Alloy Under Stress-Controlled Cyclic Conditions at Bending Loads with Zero Mean Stress

    Article • January 2022, Elsevier

    Dr. Mohammad Azadi

  68. Evaluation of Hardness and Microstructural Features in Piston Aluminum-Silicon Alloys after Different Ageing Heat Treatments

    Article • January 2022, Elsevier

    Dr. Mohammad Azadi

  69. Evaluation of Hardness and Microstructural Features in the Piston Aluminum-Silicon Alloys after Different Heat Treatments

    Article • January 2022, Elsevier

    Dr. Mohammad Azadi

  70. Important Parameters for Design and Evolution of Coronary Stents: A Review

    Article • January 2022, Elsevier

    Dr. Mohammad Azadi

  71. Influence of T6 Heat-Treating and Over-Ageing on Out-of-Phase Thermo-Mechanical Fatigue Behaviors of Al-Si-Cu Alloy

    Article • January 2022, Elsevier

    Dr. Mohammad Azadi

  72. Simple-Mix: An Updated MATLAB Code for Thermodynamics Modeling in a Gamma-Type Stirling Engine with a Working Fluid Mixture

    Article • January 2022, Elsevier

    Dr. Mohammad Azadi

  73. Evaluation of fatigue and rutting properties of asphalt binder and mastic modified by synthesized polyurethane

    Article • Journal of Traffic and Transportation Engineering (English Edition), December 2021, Elsevier

    Dr. Mohammad Azadi

  74. Study of coating effects on the performance of Stirling engine by non-ideal adiabatic thermodynamics modeling

    Article • Energy Reports, November 2021, Elsevier

    Dr. Mohammad Azadi

  75. Correction to: Estimation of Low-Cycle Fatigue Lifetime in Aluminum-Silicon-Magnesium Alloy of Cylinder Heads based on Striation Marks as Failure Features of Fracture Surfaces and Paris Crack Growth Law

    Article • Journal of Failure Analysis and Prevention, October 2021, Springer Science + Business Media

    Dr. Mohammad Azadi

  76. Bending cyclic behavior and scatter-band analysis of aluminum alloys under beneficial and detrimental conditions through high-cycle fatigue regime

    Article • Fracture and Structural Integrity, September 2021, Gruppo Italiano Frattura

    Dr. Mohammad Azadi

  77. Creep Behaviors at 275 °C for Aluminum-Matrix Nano-composite under Different Stress Levels

    Article • Archives of Foundry Engineering, September 2021, Polish Academy of Sciences Chancellery

    Dr. Mohammad Azadi

  78. High-cycle bending fatigue properties of additive-manufactured ABS and PLA polymers fabricated by fused deposition modeling 3D-printing

    Article • Forces in Mechanics, September 2021, Elsevier

    Dr. Mohammad Azadi

  79. Crack initiation detection in crankshaft ductile cast iron based on information entropy of acoustic emission signals under tensile loading

    Article • Engineering Failure Analysis, September 2021, Elsevier

    Dr. Mohammad Azadi

  80. Estimation of Low-Cycle Fatigue Lifetime in Aluminum-Silicon-Magnesium Alloy of Cylinder Heads based on Striation Marks as Failure Features of Fracture Surfaces and Paris Crack Growth Law

    Article • Journal of Failure Analysis and Prevention, July 2021, Springer Science + Business Media

    Dr. Mohammad Azadi

  81. Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy: Effect of nano-clay addition and heat-treatment

    Article • Fracture and Structural Integrity, June 2021, Gruppo Italiano Frattura

    Dr. Mohammad Azadi

  82. Corrosion Effects on High‐cycle Fatigue Lifetime and Fracture Behavior for Heat‐treated Aluminum‐matrix Nano‐clay‐composite Compared to Piston Aluminum Alloy

    Article • Silicon, May 2021, Springer Science + Business Media

    Dr. Mohammad Azadi

  83. Influences of roughness and heat treatment on high-cycle bending fatigue properties of A380 aluminum alloy under stress-controlled cyclic loading

    Article • Materials Chemistry and Physics, May 2021, Elsevier

    Dr. Mohammad Azadi

  84. Effect of plasma nitriding on high‐cycle fatigue properties and fracture behaviors of GJS700 nodular cast iron under cyclic bending loading

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2021, Wiley

    Dr. Mohammad Azadi

  85. Prediction of fiber breakage and matrix cracking in polymeric composites under low-cycle fatigue regimes by fuzzy and wavelet clustering of acoustic emission signals

    Article • April 2021, Research Square

    Dr. Mohammad Azadi

  86. Corrosion effects on high-cycle fatigue lifetime and fracture behavior for heat-treated aluminum-matrix nano-clay-composite compared to piston aluminum alloy

    Article • April 2021, Research Square

    Dr. Mohammad Azadi

  87. Prediction of fiber breakage and matrix cracking in polymeric composites under low-cycle fatigue regimes by fuzzy and wavelet clustering of acoustic emission signals

    Article • April 2021, Research Square

    Dr. Mohammad Azadi

  88. Cumulative acoustic emission energy for damage detection in composites reinforced by carbon fibers within low-cycle fatigue regime at various displacement amplitudes and rates

    Article • Polymers and Polymer Composites, January 2021, SAGE Publications

    Dr. Mohammad Azadi

  89. Sensitivity analysis for effects of heat treatment, stress, and temperature on AlSi12CuNiMg aluminum alloy behavior under force-controlled creep loading

    Article • Applied Physics A, January 2021, Springer Science + Business Media

    Dr. Mohammad Azadi

  90. PREDICTION OF FIBER BREAKAGE AND MATRIX CRACKING IN POLYMERIC COMPOSITES UNDER LOW-CYCLE FATIGUE REGIMES BY FUZZY AND WAVELET CLUSTERING OF ACOUSTIC EMISSION SIGNALS

    Article • Composites Mechanics Computations Applications An International Journal, January 2021, Begell House

    Dr. Mohammad Azadi

  91. Sensitivity analysis of mechanical properties and ductile/brittle behaviors in aluminum‐silicon alloy to loading rate and nano‐particles, considering interaction effects

    Article • Engineering Reports, December 2020, Wiley

    Dr. Mohammad Azadi

  92. Comparing of High-Cycle Fatigue Lifetimes in Un-corroded and Corroded Piston Aluminum Alloys in Diesel Engine Applications

    Article • Archives of Foundry Engineering, December 2020, Polish Academy of Sciences Chancellery

    Dr. Mohammad Azadi

  93. Influences of reinforcement and displacement rate on microstructure, mechanical properties and fracture behaviors of cylinder-head aluminum alloy

    Article • Materials Chemistry and Physics, November 2020, Elsevier

    Dr. Mohammad Azadi

  94. Fabrication of heat-treated nano-clay-composite for improving high-cycle fatigue properties of AlSiCu aluminum alloy under stress-controlled fully-reversed bending loads

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, October 2020, SAGE Publications

    Dr. Mohammad Azadi

  95. Linking fatigue response of asphalt binders, mastics, and asphalt concrete mixture modified by nano-silica and synthesized polyurethane

    Article • International Journal of Damage Mechanics, August 2020, SAGE Publications

    Dr. Mohammad Azadi

  96. Numerical simulations of carbon/epoxy laminated composites under various loading rates, comparing extended finite element method and cohesive zone modeling

    Article • Material Design & Processing Communications, August 2020, Hindawi Publishing Corporation

    Dr. Mohammad Azadi

  97. Evaluating Fatigue-Damage of Asphalt Binder and Mastic Modified with Nano-Silica and Synthesized Polyurethane Using VECD Method

    Article • Journal of Materials in Civil Engineering, August 2020, American Society of Civil Engineers (ASCE)

    Dr. Mohammad Azadi

  98. Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy

    Article • International Journal of Engineering, August 2020, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  99. Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Article • Materials Science and Engineering A, June 2020, Elsevier

    Dr. Mohammad Azadi

  100. Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C

    Article • International Journal of Engineering, April 2020, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  101. Characterization of High-Cycle Bending Fatigue Behaviors for Piston Aluminum Matrix SiO2 Nano-composites in Comparison with Aluminum–Silicon Alloys

    Article • International Journal of Metalcasting, February 2020, Springer Science + Business Media

    Dr. Mohammad Azadi

  102. Investigation of tribological and compressive behaviors of Al/SiO2 nanocomposites after T6 heat treatment

    Article • Sadhana, January 2020, Springer Science + Business Media

    Dr. Mohammad Azadi

  103. Detection of Crack Initiation and Propagation in Aluminum Alloy Under Tensile Loading, Comparing Signals Acquired by Acoustic Emission and Vibration Sensors

    Article • Journal of Nondestructive Evaluation, November 2019, Springer Science + Business Media

    Dr. Mohammad Azadi

  104. Influence of Heat Treatment on High-Cycle Fatigue and Fracture Behaviors of Piston Aluminum Alloy Under Fully-Reversed Cyclic Bending

    Article • Metals and Materials International, October 2019, Springer Science + Business Media

    Dr. Mohammad Azadi

  105. Effects of loading rate on crack growth behavior in carbon fiber reinforced polymer composites using digital image correlation technique

    Article • Composites Part B Engineering, October 2019, Elsevier

    Dr. Mohammad Azadi

  106. Creep properties and failure mechanisms of aluminum alloy and aluminum matrix silicon oxide nano-composite under working conditions in engine pistons

    Article • Materials Research Express, September 2019, Institute of Physics Publishing

    Dr. Mohammad Azadi

  107. Tensile loading rate effect on mechanical properties and failure mechanisms in open-hole carbon fiber reinforced polymer composites by acoustic emission approach

    Article • Composites Part B Engineering, February 2019, Elsevier

    Dr. Mohammad Azadi

  108. Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy

    Article • International Journal of Engineering, January 2019, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  109. Clustering effect on damage mechanisms in open-hole laminated carbon/epoxy composite under constant tensile loading rate, using acoustic emission

    Article • Composite Structures, November 2018, Elsevier

    Dr. Mohammad Azadi

  110. Evaluation of high-cycle fatigue behavior in compact bones at different loading frequencies

    Article • Meccanica, August 2018, Springer Science + Business Media

    Dr. Mohammad Azadi

  111. The Effect of New Double Solution Heat Treatment on the High Manganese Hadfield Steel Properties

    Article • Metallography Microstructure and Analysis, August 2018, Springer Science + Business Media

    Dr. Mohammad Azadi

  112. A parametric study on mechanical properties of aluminum–silicon/SiO2 nano-composites by a solid–liquid phase processing

    Article • Applied Physics A, June 2018, Springer Science + Business Media

    Dr. Mohammad Azadi

  113. Effects of SiO2 nano-particles on tribological and mechanical properties of aluminum matrix composites by different dispersion methods

    Article • Applied Physics A, April 2018, Springer Science + Business Media

    Dr. Mohammad Azadi

  114. Evaluation of high-cycle bending fatigue and fracture behaviors in EN-GJS700-2 ductile cast iron of crankshafts

    Article • Engineering Failure Analysis, March 2018, Elsevier

    Dr. Mohammad Azadi

  115. Optimal Design Experiment of Ageing Time and Temperature in Inconel-713C Superalloy Based on Hardness Objective

    Article • Transactions of the Indian Institute of Metals, February 2018, Springer Science + Business Media

    Dr. Mohammad Azadi

  116. Characterization of creep damage and lifetime in Inconel-713C nickel-based superalloy by stress-based, strain/strain rate-based and continuum damage mechanics models

    Article • Materials Research Express, February 2018, Institute of Physics Publishing

    Dr. Mohammad Azadi

  117. Effects of solutioning and ageing treatments on properties of Inconel-713C nickel-based superalloy under creep loading

    Article • Materials Science and Engineering A, January 2018, Elsevier

    Dr. Mohammad Azadi

  118. Microstructural and thermal properties of piston aluminum alloy reinforced by nano-particles

    Article • January 2018, American Institute of Physics

    Dr. Mohammad Azadi

  119. Reliability prediction, scatter-band analysis and fatigue limit assessment of high-cycle fatigue properties in EN-GJS700-2 ductile cast iron

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr. Mohammad Azadi

  120. Sensitivity analysis for effects of displacement amplitude and loading frequency on low-cycle fatigue lifetime in carbon/epoxy laminated composites

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr. Mohammad Azadi

  121. Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy

    Article • International Journal of Engineering, October 2017, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  122. The effect of the chemical composition and the volume of coated carbonate calcium on epoxy paint properties

    Article • Russian Journal of Applied Chemistry, July 2017, Pleiades Publishing Ltd

    Dr. Mohammad Azadi

  123. Cyclic thermo-mechanical stress, strain and continuum damage behaviors in light alloys during fatigue lifetime considering heat treatment effect

    Article • International Journal of Fatigue, June 2017, Elsevier

    Dr. Mohammad Azadi

  124. Evaluation of high-temperature creep behavior in Inconel-713C nickel-based superalloy considering effects of stress levels

    Article • Materials Science and Engineering A, March 2017, Elsevier

    Dr. Mohammad Azadi

  125. A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition

    Article • International Journal of Engineering, May 2016, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  126. Failure analysis and prevention in powertrain systems

    Article • January 2016, Elsevier

    Dr. Mohammad Azadi

  127. Comparison Between Isothermal and Non-Isothermal Fatigue Behavior in a Cast Aluminum-Silicon-Magnesium Alloy

    Article • Strength of Materials, November 2015, Springer Science + Business Media

    Dr. Mohammad Azadi

  128. Damage prediction for un-coated and coated aluminum alloys under thermal and mechanical fatigue loadings based on a modified plastic strain energy approach

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Dr. Mohammad Azadi

  129. Stress analysis of thermal barrier coating system subjected to out-of-phase thermo-mechanical loadings considering roughness and porosity effect

    Article • Surface and Coatings Technology, January 2015, Elsevier

    Dr. Mohammad Azadi

  130. Constitutive modeling of elastic-visco-plastic behaviors in aluminum alloys subjected to cyclic loadings at various strain rates

    Article • The Journal of Strain Analysis for Engineering Design, December 2014, SAGE Publications

    Dr. Mohammad Azadi

  131. Effects of preheating temperature and cooling rate on two-step residual stress in thermal barrier coatings considering real roughness and porosity effect

    Article • Ceramics International, December 2014, Elsevier

    Dr. Mohammad Azadi

  132. Effect of Temperature and Gas Flux on the Mechanical Behavior of TiC Coating by Pulsed DC Plasma Enhanced Chemical Vapor Deposition

    Article • International Journal of Engineering, August 2014, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  133. Experimental and numerical evaluations of stress relaxation in A356 aluminium alloy subjected to out-of-phase thermomechanical cyclic loadings

    Article • Materials at High Temperatures, May 2014, Taylor & Francis

    Dr. Mohammad Azadi

  134. Stress–strain time-dependent behavior of A356.0 aluminum alloy subjected to cyclic thermal and mechanical loadings

    Article • Mechanics of Time-Dependent Materials, May 2014, Springer Science + Business Media

    Dr. Mohammad Azadi

  135. Numerical simulations of cyclic behaviors in light alloys under isothermal and thermo-mechanical fatigue loadings

    Article • Materials & Design (1980-2015), April 2014, Elsevier

    Dr. Mohammad Azadi

  136. Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects

    Article • Surface and Coatings Technology, March 2014, Elsevier

    Dr. Mohammad Azadi

  137. Thermo-mechanical behaviours of light alloys in comparison to high temperature isothermal behaviours

    Article • Materials at High Temperatures, January 2014, Taylor & Francis

    Dr. Mohammad Azadi

  138. Fatigue lifetime of AZ91 magnesium alloy subjected to cyclic thermal and mechanical loadings

    Article • Materials & Design (1980-2015), January 2014, Elsevier

    Dr. Mohammad Azadi

  139. Nanomechanical Properties of TiN/TiC Multilayer Coatings

    Article • Strength of Materials, January 2014, Springer Science + Business Media

    Dr. Mohammad Azadi

  140. Improvement of high temperature fatigue lifetime in AZ91 magnesium alloy by heat treatment

    Article • Materials Science and Engineering A, December 2013, Elsevier

    Dr. Mohammad Azadi

  141. Experimental fatigue lifetime of coated and uncoated aluminum alloy under isothermal and thermo-mechanical loadings

    Article • Ceramics International, December 2013, Elsevier

    Dr. Mohammad Azadi

  142. Effect of rare earth elements on high cycle fatigue behavior of AZ91 alloy

    Article • Materials Science and Engineering A, December 2013, Elsevier

    Dr. Mohammad Azadi

  143. Mechanical Behavior and Properties of TiN/TiC Coating Using PACVD

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Dr. Mohammad Azadi

  144. A new energy‐based isothermal and thermo‐mechanical fatigue lifetime prediction model for aluminium–silicon–magnesium alloy

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2013, Wiley

    Dr. Mohammad Azadi

  145. Optimization of Air Plasma Sprayed Thermal Barrier Coating Parameters in Diesel Engine Applications

    Article • Journal of Materials Engineering and Performance, July 2013, Springer Science + Business Media

    Dr. Mohammad Azadi

  146. Heat treatment effect on thermo-mechanical fatigue and low cycle fatigue behaviors of A356.0 aluminum alloy

    Article • Materials & Design (1980-2015), March 2013, Elsevier

    Dr. Mohammad Azadi

  147. Effects of strain rate and mean strain on cyclic behavior of aluminum alloys under isothermal and thermo-mechanical fatigue loadings

    Article • International Journal of Fatigue, February 2013, Elsevier

    Dr. Mohammad Azadi

  148. The Effect of Various Parameters on Out-of-phase Thermo-mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy

    Article • International Journal of Engineering, December 2012, International Digital Organization for Scientific Information (IDOSI)

    Dr. Mohammad Azadi

  149. Failure Analysis of a Cracked Gasoline Engine Cylinder Head

    Article • Journal of Failure Analysis and Prevention, March 2012, Springer Science + Business Media

    Dr. Mohammad Azadi

  150. Multidisciplinary optimization of a stiffened shell by genetic algorithm

    Article • Journal of Mechanical Science and Technology, February 2012, Springer Science + Business Media

    Dr. Mohammad Azadi

  151. Optimal experiment design for plasma thermal spray parameters at bending loads

    Article • International Journal of Surface Science and Engineering, January 2012, Inderscience Publishers

    Dr. Mohammad Azadi

  152. Temperature and thickness effects on thermal and mechanical stresses of rotating FG-disks

    Article • Journal of Mechanical Science and Technology, March 2011, Springer Science + Business Media

    Dr. Mohammad Azadi

  153. Thermoelastic Stresses in FG-Cylinders

    Article • February 2011, IntechOpen

    Dr. Mohammad Azadi

  154. Free and forced vibration analysis of FG beam considering temperature dependency of material properties

    Article • Journal of Mechanical Science and Technology, January 2011, Springer Science + Business Media

    Dr. Mohammad Azadi

  155. RETRACTED: Coating thickness and roughness effect on stress distribution of A356.0 under thermo-mechanical loadings

    Article • Procedia Engineering, January 2011, Elsevier

    Dr. Mohammad Azadi

  156. NVH analysis and improvement of a vehicle body structure using DOE method

    Article • Journal of Mechanical Science and Technology, November 2009, Springer Science + Business Media

    Dr. Mohammad Azadi

  157. Nonlinear transient transfinite element thermal analysis of thick-walled FGM cylinders with temperature-dependent material properties

    Article • Meccanica, October 2009, Springer Science + Business Media

    Dr. Mohammad Azadi

  158. Nonlinear transient heat transfer and thermoelastic analysis of thick-walled FGM cylinder with temperature-dependent material properties using Hermitian transfinite element

    Article • Journal of Mechanical Science and Technology, October 2009, Springer Science + Business Media

    Dr. Mohammad Azadi

  159. Multidisciplinary Optimization of a Car Component Under NVH and Weight Constraints Using RSM

    Article • January 2009, ASME International

    Dr. Mohammad Azadi

  160. Multidisciplinary optimisation of a car component under NVH and weight constraints using RSM

    Article • International Journal of Vehicle Noise and Vibration, January 2009, Inderscience Publishers

    Dr. Mohammad Azadi

  161. Nonlinear Thermoelastic Stress Analysis of the Rotating FGM Disk With Variable Thickness and Temperature-Dependent Material Properties Using Finite Element Method

    Article • January 2009, ASME International

    Dr. Mohammad Azadi

  162. Fatigue Analysis of Antiroll Bar for Periodic and Random Inputs Using Various Theories and Introducing a New Method

    Article • January 2009, ASME International

    Dr. Mohammad Azadi