All Stories

  1. Investigation of solar-induced photoelectrochemical water splitting and photocatalytic dye removal activities of camphor sulfonic acid doped polyaniline -WO3- MWCNT ternary nanocomposite
  2. Toward enhancing the photoelectrochemical water splitting efficiency of organic acid doped polyaniline-WO3 photoanode by photo-assisted electrochemically reduced graphene oxide
  3. Structural characterization, mechanical, and electrochemical studies of hydroxyapatite‐titanium composite coating fabricated using electrophoretic deposition and reaction bonding process
  4. Experimental investigation of MoS2/diesel oil nanofluid thermophysical and rheological properties
  5. Pulse Plating of Ni-W-B Coating and Study of Its Corrosion and Wear Resistance
  6. TiO2 nanoparticles with superior hydrogen evolution and pollutant degradation performance
  7. Enhancement of output power density and performance of direct borohydride-hydrogen peroxide fuel cell using Ni-Pd core-shell nanoparticles on polymeric composite supports (rGO-PANI) as novel electrocatalysts
  8. Preparation and characterization of hexagonal mesoporous β-Co(OH)2 nanorings
  9. Influence of electrodeposition potential, TiO2 nanoparticles and chromium (III) inhibitor addition on the corrosion protection performance of organosilane coating on aluminium
  10. Pulse plating of Ni–B/WC nanocomposite coating and study of its corrosion and wear resistance
  11. Fabrication and evaluation of the performance of Co/CoNiZnAg nanoporous structures as a good candidate for using as anode catalyst in a hydrazine fuel cell
  12. Facile and Scalable Synthesis of Ultrafine MnCo2O4 Nanoparticles Via Mechanical Alloying as Supercapacitive Materials
  13. Enhancement the anticorrosive resistance of epoxy coatings by incorporation of CeO2 @ polyaniline @ 2-mercaptobenzotiazole nanocomposite
  14. RuO2, RuO2–TiO2 and RuO2–TiO2–IrO2 nanoparticles supported on Ni mesh as mixed metal oxide electrodes for oxygen reduction reaction
  15. The influence of electrodeposited PPy film morphology on the electrochemical characteristics of Nafion-based energy storage devices
  16. Low-cost nanowired α-MnO2/C as an ORR catalyst in air-cathode microbial fuel cell
  17. Epoxy coating with self-healing capability based on a 2-mercaptobenzothiazole-loaded CeO2 nanocontainer
  18. Towards Production of a Highly Catalytic and Stable Graphene-Wrapped Graphite Felt Electrode for Vanadium Redox Flow Batteries
  19. Preparation and corrosion performance of healable waterborne polyurethane coatings containing isophoronediisocyanate loaded silica capsules
  20. Mechanochemically synthesized NiCo2O4/Vulcan/PANI nanocomposite and investigation of its electrochemical behavior as a supercapacitor
  21. Self-healing and corrosion protection performance of organic polysulfide@urea-formaldehyde resin core-shell nanoparticles in epoxy/PANI/ZnO nanocomposite coatings on anodized aluminum alloy
  22. Self‐healing waterborne polyurethane coating by pH‐dependent triggered‐release mechanism
  23. RuO2 modification of graphene oxide-multiwalled carbon nanotubes as excellent positive electrode for vanadium redox flow battery
  24. Pd-Ni nanoparticle supported on reduced graphene oxide and multi-walled carbon nanotubes as electrocatalyst for oxygen reduction reaction
  25. Ni@Pd core-shell nanostructure supported on multi-walled carbon nanotubes as efficient anode nanocatalysts for direct methanol fuel cells with membrane electrode assembly prepared by catalyst coated membrane method
  26. High-power positive electrode based on synergistic effect of N- and WO3 -decorated carbon felt for vanadium redox flow batteries
  27. Improving the anticorrosive performance of epoxy coatings by embedding various percentages of unmodified and imidazole modified CeO 2 nanoparticles
  28. Anchoring RuO2 nanoparticles on reduced graphene oxide-multi-walled carbon nanotubes as a high-performance supercapacitor
  29. The influence of electrodeposited conducting polymer electrode structure on the actuation performance of muscle-like ionic actuators
  30. Ni–B/SiC nanocomposite coating obtained by pulse plating and evaluation of its electrochemistry and mechanical properties
  31. Evaluation of the Electrochemical Activity and Stability of Ti/IrO2–Ta2O5 Electrode as Anode in the Cathodic Protection Systems via Impressed Current
  32. Preparation of Pt/G and PtNi/G nanocatalysts with high electrocatalytic activity for borohydride oxidation and investigation of different operation condition on the performance of direct borohydride-hydrogen peroxide fuel cell
  33. Green synthesis of water-soluble graphene nanosheets under solvent-free condition and in-situ anchored with MnO2 as supercapacitor
  34. Electrochemical and Electromechanical Study of Carbon-Electrode-Based Ionic Soft Actuators
  35. 3D structured polypyrrole/reduced graphene oxide (PPy/rGO)-based electrode ionic soft actuators with improved actuation performance
  36. High performance direct hydrazine–hydrogen peroxide fuel cell using reduced graphene oxide supported Ni@M (M = Pt, Pd, Ru) nanoparticles as novel anodic electrocatalysts
  37. Electrochemical impedance spectroscopy evaluation on the protective properties of epoxy/DBSAdoped polyaniline-TiO 2 nanocomposite coated mild steel under cathodic polarization
  38. Improvement of energy conversion efficiency and power generation in direct borohydride-hydrogen peroxide fuel cell: The effect of Ni-M core-shell nanoparticles (M = Pt, Pd, Ru)/Multiwalled Carbon Nanotubes on the cell performance
  39. The effect of MWCNT content on electropolymerization of PPy film and electromechanical behavior of PPy electrode-based soft actuators
  40. Preparation method of Ni@Pt/C nanocatalyst affects the performance of direct borohydride-hydrogen peroxide fuel cell: Improved power density and increased catalytic oxidation of borohydride
  41. Electrooxidation of ethanol on platinum nanoparticles supported by ZrO2 nanotube matrix as a new highly active electrode
  42. Carbon supported Ni 1 Pt 1 nanocatalyst as superior electrocatalyst with increased power density in direct borohydride-hydrogen peroxide and investigation of cell impedance at different temperatures and discharging currents
  43. Fabrication of novel solid-state supercapacitor using a Nafion polymer membrane with graphene oxide/multiwalled carbon nanotube/polyaniline
  44. A Development in Direct Borohydride/Hydrogen Peroxide Fuel Cell Using Nanostructured Ni-Pt/C Anode
  45. The comparison of direct borohydride-hydrogen peroxide fuel cell performance with membrane electrode assembly prepared by catalyst coated membrane method and catalyst coated gas diffusion layer method using Ni@Pt/C as anodic catalyst
  46. Electrochemical behavior of a Nafion-membrane-based solid-state supercapacitor with a graphene oxide-multiwalled carbon nanotube-polypyrrole nanocomposite
  47. Synthesis and characterization of palladium nanoparticles immobilized on ZrO2 nanotubes as a new highly active electrode for methanol electro-oxidation
  48. Electrochemical and electromechanical behavior of Nafion-based soft actuators with PPy/CB/MWCNT nanocomposite electrodes
  49. Evaluation effect of electrodeposition parameters on superhydrophobicity and corrosion performance of nickel coatings
  50. Ni@M (M = Pt, Pd and Ru) core@shell nanoparticles on a Vulcan XC-72R support with superior catalytic activity toward borohydride oxidation: electrochemical and fuel cell studies
  51. Oxygen depolarized cathode in advanced chlor-alkali cell with Pt-Ru nanoparticles as electro-catalyst: effect of process conditions and response surface methodology
  52. Enhanced Photocatalytic Activity of Ag Doped ZnO Nanorods for Degradation of an Azo Dye
  53. Porous Co/Co–Ni–Pt nanostructures prepared by galvanic replacement towards methanol electro-oxidation
  54. Synthesis, Characterization and Electrochemical Study of Graphene Oxide-Multi Walled Carbon Nanotube-Manganese Oxide-Polyaniline Electrode as Supercapacitor
  55. Evaluation of corrosion, mechanical and structural properties of new Ni–W–PCTFE nanocomposite coating
  56. Electrocatalysis of oxygen reduction on multi-walled carbon nanotube supported Ru-based catalysts in alkaline media
  57. Electrochemical, Structural and Nano Tribological Behavior of Ni-W-PTFE Nanocomposite Coatings Prepared by Tartrate Bath
  58. Effect of Water and Fluoride Content of Anodizing Electrolyte on Morphology and Corrosion Behavior of ZrO2-Nanotubes Developed on Zirconium Implant
  59. Preparation of a Ni–Mo–P–PCTFE nanocomposite coating and evaluation of its nano-tribological, mechanical and electrochemical performance
  60. Corrosion and biological behavior of nanostructured 316L stainless steel processed by severe plastic deformation
  61. Electrocatalytical study of carbon supported Pt, Ru and bimetallic Pt–Ru nanoparticles for oxygen reduction reaction in alkaline media
  62. Selective recognition of Ni2+ ion based on fluorescence enhancement chemosensor
  63. Effect of Equal Channel Angular Pressing Process on the Corrosion Behavior of Type 316L Stainless Steel in Ringer's Solution
  64. Turn-on fluorescent chemosensor for determination of lutetium ion
  65. Fabrication, characterisation and investigation of zirconium oxide corrosion behaviour on resistance of zirconium oxide nanotubes in artificial saliva as biological environment
  66. Yb-Doped ZnSe Nanoparticles: Synthesis, Physical Properties and Photocatalytic Activity
  67. Different TiO2 nanotubes for back illuminated dye sensitized solar cell: fabrication, characterization and electrochemical impedance properties of DSSCs
  68. Corrosion resistance of Ni–Co alloy and Ni–Co/SiC nanocomposite coatings electrodeposited by sediment codeposition technique
  69. Magnetic Behavior of Single Ni Nanowires and its Arrays Embedded in Highly Ordered Nanoporous Alumina Templates
  70. An investigation on the effect of surface morphology and crystalline texture on corrosion behavior, structural and magnetic properties of electrodeposited nanocrystalline nickel films
  71. Investigation of corrosion resistance of electrodeposited Ni–W/SiC composite coatings
  72. Investigation of the porous nanostructured Cu/Ni/AuNi electrode for sodium borohydride electrooxidation
  73. Synthesis and Characterization of ErxZn1–x Se Nanoparticles: A Novel Visible Light Responsive Photocatalyst
  74. Electrochemical impedance study on methyl orange and methyl red as power enhancing electron mediators in glucose fed microbial fuel cell
  75. Synthesis and characterization of porous nanostructured Ni/PdNi electrode towards electrooxidation of borohydride
  76. Preparation Ce(III) conversion coatings on electrodeposited Zn–Ni alloy and comparison of their corrosion performance and morphology with Cr(VI) conversion coatings
  77. Gold nanoparticles deposited on polyaniline nanofibres as for electro-oxidation of hydrazine
  78. Refinement of electrodeposition mechanism for fabrication of thin nickel films on n-type silicon (111)
  79. Effect of Ti-containing inclusions on the nucleation of acicular ferrite and mechanical properties of multipass weld metals
  80. APPLICATION AND COMPARISON OF CURRENT INTERRUPTION AND ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY METHODS TO STUDY A MICROBIAL FUEL CELL
  81. Hydrothermal synthesis and characterization of Nd-doped ZnSe nanoparticles with enhanced visible light photocatalytic activity
  82. A dual-chambered microbial fuel cell with Ti/nano-TiO2/Pd nano-structure cathode
  83. Magnetic Properties of Nickel Nanowire Arrays Patterned by Template Electrodeposition
  84. Deposition and corrosion resistance of electroless Ni-PCTFE-P nanocomposite coatings
  85. Platinum nanoparticle-decorated TiO2 nanotube arrays as new highly active and non-poisoning catalyst for photo-electrochemical oxidation of galactose
  86. Influence of metal oxide nanoparticles on pseudocapacitive behavior of wet-spun polyaniline-multiwall carbon nanotube fibers
  87. UV-cleaning properties of Pt nanoparticle-decorated titania nanotubes in the electro-oxidation of methanol: An anti-poisoning and refreshable electrode
  88. SYNTHESIS AND CHARACTERIZATION OF PALLADIUM NANOPARTICLES IMMOBILIZED ON TiO2 NANOTUBES AS A NEW HIGH ACTIVE ELECTRODE FOR METHANOL ELECTRO-OXIDATION
  89. Evaluation of the Performance of Platinum Nanoparticle-Titanium Oxide Nanotubes as a New Refreshable Electrode for Formic Acid Electro-oxidation
  90. Fabrication and photo-electrocatalytic activity of highly oriented titania nanotube loaded with platinum nanoparticles for electro-oxidation of lactose: A new recyclable electro-catalyst
  91. High-density nickel nanowire arrays for data storage applications
  92. Preparation, characterization, and application of alkaline leached Ni/Zn–Ni binary coatings for electro-oxidation of methanol in alkaline solution
  93. Electrosynthesis and Characterization of Polypyrrole in the Presence of 2,5-di-(2-thienyl)-Pyrrole (SNS)
  94. Effect of polyaniline–montmorillonite nanocomposite powders addition on corrosion performance of epoxy coatings on Al 5000
  95. Preparation and electrocatalytic activity of gold nanoparticle embedded in highly ordered TiO2nanotube array electrode for electro-oxidation of galactose
  96. Photodegradation of an azo dye by silver-doped nano-particulate titanium dioxide
  97. Fabrication and Simulation of Implantable Glucose Fuel Cell
  98. Self-humidifying nanocomposite membranes based on sulfonated poly(ether ether ketone) and heteropolyacid supported Pt catalyst for fuel cells
  99. Electrodeposition mechanism of nickel films on polycrystalline copper from dilute simple sulphate solutions
  100. Fabrication of Au-Nanoparticle/TiO2-Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone
  101. Electropolymerization of polypyrrole and polypyrrole-ZnO nanocomposites on mild steel and its corrosion protection performance
  102. Application of titanium oxide nanotube films containing gold nanoparticles for the electroanalytical determination of ascorbic acid
  103. Electro-oxidation of hydrazine on gold nanoparticles supported on TiO2 nanotube matrix as a new high active electrode
  104. Geometry Dependent Magnetic Properties of Ni Nanowires Embedded in Self-Assembled Arrays
  105. Polyaniline nanofibers supported on titanium as templates for immobilization of Pd nanoparticles: A new electro-catalyst for hydrazine oxidation
  106. An innovative electrochemical approach for voltammetric determination of levodopa using gold nanoparticles doped on titanium dioxide nanotubes
  107. Highly Active Nickel Nanoparticles Supported on TiO2 Nanotube Electrodes for Methanol Electrooxidation
  108. Investigation of physical properties and cell performance of Nafion/TiO2 nanocomposite membranes for high temperature PEM fuel cells
  109. Ni–TiO2 nanocomposite coating with high resistance to corrosion and wear
  110. The effect of Tl(I) on the hard gold alloy electrodeposition of Au–Co from acid baths
  111. An innovative approach to electro-oxidation of dopamine on titanium dioxide nanotubes electrode modified by gold particles
  112. Silver nanoparticles dispersed in polyaniline matrixes coated on titanium substrate as a novel electrode for electro-oxidation of hydrazine
  113. Effect of carbon steel microstructure and molecular structure of two new Schiff base compounds on inhibition performance in 1M HCl solution by DC, SEM and XRD studies
  114. Electrochemical fabrication of polyaniline films containing gold nanoparticles deposited on titanium electrode for electro-oxidation of ascorbic acid
  115. Electrodeposition and mechanical properties of Ni-W-B composites from tartrate bath
  116. Effect of polypyrrole–montmorillonite nanocomposites powder addition on corrosion performance of epoxy coatings on Al 5000
  117. Protection of mild steel corrosion with new thia-derivative Salens in 0.5 M H2SO4 solution
  118. Gold particles supported on self-organized nanotubular TiO2 matrix as highly active catalysts for electrochemical oxidation of glucose
  119. Electrodeposition of Ni–W–B nanocomposite from tartrate electrolyte as alternative to chromium plating
  120. Effect of carbon steel microstructures and molecular structure of two new Schiff base compounds on inhibition performance in 1M HCl solution by EIS
  121. Effect of cathodic polarisation on pitting corrosion of AA5083-H321 aluminium–magnesium alloy in stagnant 3·5% NaCl solution
  122. Polypyrrole and polypyrrole–tungstate electropolymerization coatings on carbon steel and evaluating their corrosion protection performance via electrochemical impedance spectroscopy
  123. Effect of carbon steel microstructures and molecular structure of two new Schiff base compounds on inhibition performance in 1M HCl solution by EIS
  124. Morphological characterization of AA5083‐H321 aluminum alloy corrosion in NaCl solution under hydrodynamic conditions
  125. Comparison of the corrosion protection of mild steel by polypyrrole-phosphate and polypyrrole-tungstenate coatings
  126. EN, EIS and polarization studies to evaluate the inhibition effect of 3H-phenothiazin-3-one, 7-dimethylamin on mild steel corrosion in 1M HCl solution
  127. Synthesis of poly(3-methylthiophene) in the presence of 1-(2-Pyrrolyl)-2-(2-thienyl) ethylene by electropolymerization
  128. Influence of tungstate ion dopants in corrosion protection behavior of polyaniline coating on mild steel
  129. Synergism in copper corrosion inhibition by sodium dodecylbenzenesulphonate and 2-mercaptobenzoimidazole
  130. Inhibition of 3003 aluminum alloy corrosion by propargyl alcohol and tartrate ion and their synergistic effects in 0.5% NaCl solution
  131. Synergistic effect on corrosion inhibition of copper by sodium dodecylbenzenesulphonate (SDBS) and 2-mercaptobenzoxazole
  132. Electrochemical studies of Zn–Ni alloy coatings from non-cyanide alkaline bath containing tartrate as complexing agent
  133. Effect of rare earth (Ce, La) compounds in the electroless bath on the plating rate, bath stability and microstructure of the nickel–phosphorus deposits
  134. Improvement of the conductivity, electroactivity, and redoxability of polythiophene by electropolymerization of thiophene in the presence of catalytic amount of 1-(2-pyrrolyl)-2-(2-thienyl) ethylene (PTE)
  135. Improving corrosion protection performance of polypyrrole coating by tungstate ion dopants
  136. Corrosion Protection of Electro-Galvanized Steel by Green Conversion Coatings
  137. Corrosion protection of mild steel by polypyrrole phosphate composite coating
  138. Corrosion inhibition of copper in sulphuric acid by some nitrogen heterocyclic compounds
  139. Protection of mild steel corrosion with Schiff bases in 0.5M H2SO4 solution
  140. Innovation in acid pickling treatments of copper by characterizations of a new series of Schiff bases as corrosion inhibitors
  141. Comparison between polyaniline-phosphate and polypyrrole-phosphate composite coatings for mild steel corrosion protection
  142. Synergistic effect of 1‐dodecanethiol upon inhibition of Schiff bases on carbon steel corrosion in sulphuric acid media
  143. Inhibition of copper corrosion by self-assembled films of new Schiff bases and their modification with alkanethiols in aqueous medium
  144. Adsorption of 2-mercaptobenzimidazole on a Au(111) electrode
  145. Determination of suitable corrosion inhibitor formulation for a potable water supply
  146. Synergism and antagonism in mild steel corrosion inhibition by sodium dodecylbenzenesulphonate and hexamethylenetetramine
  147. Asymmetrical Schiff bases as inhibitors of mild steel corrosion in sulphuric acid media
  148. An in-situ infrared spectroscopic study of the adsorption of citrate on Au(111) electrodes
  149. Inhibition effect of 3,5 bis (2-pyridil) 4-amino 1,2,4 triazole and 1-10 phenantrolin on corrosion of mild steel in acid solutions