All Stories

  1. Exploring the use of artificial intelligence (AI) for corrosion-related tasks: Using large language models (LLMs) to analyse organic coatings images
  2. Exploring the use of machine learning for interpreting electrochemical impedance spectroscopy data: evaluation of the training dataset size
  3. Understanding the effects of excimer laser treatment on corrosion behavior of biodegradable Mg-1Ca alloy in simulated body fluid
  4. The degradation mechanism of a marine coating under service conditions of water ballast tank
  5. The influence of mechanical grinding on the microstructure and corrosion behaviour of A356 aluminium alloys
  6. Influence of temperature on the corrosion testing of anodized aerospace alloys
  7. Relationship between natural exposure testing and cyclic corrosion testing ISO 20340 for the assessment of the durability of powder-coated steel
  8. Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys
  9. Thermodynamic Equivalence Charts for Stress Corrosion Cracking Studies in Hydrogenated Steam, High Pressure and Supercritical Water
  10. Results of an international round-robin exercise on electrochemical impedance spectroscopy
  11. The effect of exposure conditions on performance evaluation of post-treated anodic oxides on an aerospace aluminium alloy: Comparison between salt spray and immersion testing
  12. Exploring the effect of cathodic polarization to mitigate CRUD deposition
  13. Exploring the use of an AC-DC-AC technique for the accelerated evaluation of anticorrosion performance of anodic films on aluminium alloys
  14. Experiments on Liquid Flow through Non-Circular Micro-Orifices
  15. Understanding the effect of Li and flow velocity on corrosion deposition at 230 °C hydrogenated water
  16. Corrosion protection mechanism of 2-mercaptobenzothiazole and its potential synergistic effect with cerium ions for treatment of AA 2024-T3
  17. CRUD deposition in accelerated high-temperature water: Investigation on the effect of substrate material and water chemistry
  18. Corrosion Testing of Anodized Aerospace Alloys: Comparison Between Immersion and Salt Spray Testing using Electrochemical Impedance Spectroscopy
  19. INVESTIGATION OF POROUS ANODIC FILM FORMATION ON AA1050 BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY
  20. Deposition of corrosion products under pressurised water nuclear reactor conditions: The effect of flow velocity and dissolved hydrogen
  21. Nickel fluoride as a surface activation agent for electroless nickel coating of anodized AA1050 aluminum alloy
  22. A Novel Methodology for Economical Scale-Up of TiO2 Nanotubes Fabricated on Ti and Ti Alloys
  23. CRUD removal via hydrodynamic cavitation in micro-orifices
  24. Incorporation of alloying elements into porous anodic films on aluminium alloys: The role of cell diameter
  25. Electrochemical testing practices of environmentally friendly aerospace coatings for corrosion performance assessment
  26. Replicating PWR Primary Water Conditions in Low Pressure H2-Steam Environment to Study Alloy 600 Oxidation Processes
  27. An experimental study of cathodic protection for chloride contaminated reinforced concrete
  28. Effect of thickness to diameter ratio on micro-orifice single-phase liquid flow at low Reynolds number
  29. Relationship between the inductive response observed during electrochemical impedance measurements on aluminium and local corrosion processes
  30. Effect of anodizing conditions on the cell morphology of anodic films on AA2024‐T3 alloy
  31. One-Step Fiber Laser Fabrication of Mesoporous and Compact TiO2 Layers for Enhanced Performance of Dye-Sensitized Solar Cells
  32. A mathematical description accounting for the superfluous hydrogen evolution and the inductive behaviour observed during electrochemical measurements on magnesium
  33. Complete long-term corrosion protection with chemical vapor deposited graphene
  34. Effects of oxygen evolution on the voltage and film morphology during galvanostatic anodizing of AA 2024-T3 aluminium alloy in sulphuric acid at −2 and 24 °C
  35. Effect of fluorozirconic acid on anodizing of aluminium and AA 2024-T3 alloy in sulphuric and tartaric-sulphuric acids
  36. Correlation between electrochemical impedance measurements and corrosion rates of Mg-1Ca alloy in simulated body fluid
  37. Micro-orifice single-phase flow at very high Reynolds number
  38. A one-step laser process for rapid manufacture of mesoscopic perovskite solar cells prepared under high relative humidity
  39. Rapid fabrication of mesoporous TiO2 thin films by pulsed fibre laser for dye sensitized solar cells
  40. Development of a microfluidic setup to study the corrosion product deposition in accelerated flow regions
  41. Electrochemical and Microstructural Characterization of Alloy 600 in Low Pressure H2-Steam
  42. The contribution of hydrogen evolution processes during corrosion of aluminium and aluminium alloys investigated by potentiodynamic polarisation coupled with real-time hydrogen measurement
  43. Investigation into the effect of water chemistry on corrosion product formation in areas of accelerated flow
  44. Effects of fluoride ions in the growth of barrier-type films on aluminium
  45. Development of a Chromium-Free Post-Anodizing Treatment Based on 2-Mercaptobenzothiazole for Corrosion Protection of AA2024T3
  46. Development of an Electrochemical Balance to Measure Quantitatively Hydrogen Generation during Electrochemical Processes
  47. Gravimetric Measurement of Oxygen Evolution during Anodizing of Aluminum Alloys
  48. Influence of Fluorozirconic Acid on Sulfuric Acid Anodizing of Aluminum
  49. Two-shell structured PMAA@CeO2 nanocontainers loaded with 2-mercaptobenzothiazole for corrosion protection of damaged epoxy coated AA 2024-T3
  50. Application of Side-View Imaging and Real-Time Hydrogen Measurement to the Investigation of Magnesium Corrosion
  51. Will Aluminium Structures Last Forever?
  52. Choked cavitation in micro-orifices: An experimental study
  53. A study on magnesium corrosion by real-time imaging and electrochemical methods: relationship between local processes and hydrogen evolution
  54. Study of the Linear Friction Welding Process of Dissimilar Ti-6Al-4V–Stainless Steel Joints
  55. Application of EIS to In Situ Characterization of Hydrothermal Sealing of Anodized Aluminum Alloys: Comparison between Hexavalent Chromium-Based Sealing, Hot Water Sealing and Cerium-Based Sealing
  56. Cerium-Based Sealing of Anodic Films on AA2024T3: Effect of Pore Morphology on Anticorrosion Performance
  57. Characterization of 2024 T3 Aluminum Alloy after Rare Earth Desmutting
  58. Protective Film Formation on AA2024-T3 Aluminum Alloy by Leaching of Lithium Carbonate from an Organic Coating
  59. The Mechanism of Hydrogen Evolution During Anodic Polarization of Aluminium
  60. Effectiveness of 2‐mercaptobenzothiazole, 8‐hydroxyquinoline and benzotriazole as corrosion inhibitors on AA 2024‐T3 assessed by electrochemical methods
  61. Study of the Metallurgy of a Dissimilar Ti-6Al-4V – Stainless Steel Linear Fiction Welded Joints
  62. Correlation between electrochemical impedance measurements and corrosion rate of magnesium investigated by real-time hydrogen measurement and optical imaging
  63. Corrosion Behavior of Pure Magnesium with Low Iron Content in 3.5 wt% NaCl Solution
  64. Efficiency of anodising of Al–Cu alloy in sulphuric acid at low potentials
  65. Corrosion resistance of graphene directly and locally grown on bulk nickel substrate by laser irradiation
  66. Modeling data acquisition during electrochemical noise measurements for corrosion studies
  67. Development of Cerium-Rich Layers on Anodic Films Formed on Pure Aluminium and AA7075 T6 Alloy
  68. The effect of annealing on the corrosion behaviour of 444 stainless steel for drinking water applications
  69. Electrochemical characteristics of a carbon fibre composite and the associated galvanic effects with aluminium alloys
  70. Evaluation of Inhibitor Performance by Electrochemical Methods: Comparative Study of Nitrate Salts on AA 2024-T3
  71. Corrosion behaviour of stainless steel-titanium alloy linear friction welded joints: Galvanic coupling
  72. The behaviour of magnesium during free corrosion and potentiodynamic polarization investigated by real-time hydrogen measurement and optical imaging
  73. Anodized anti-corrosion coatings for aluminium using rare earth metals
  74. An alternative to the use of a zero resistance ammeter for electrochemical noise measurement: Theoretical analysis, experimental validation and evaluation of electrode asymmetry
  75. Reliability of the estimation of polarization resistance of corroding electrodes by electrochemical noise analysis: Effects of electrode asymmetry
  76. Extending the Life of Light Alloy Components: Microstructure, Corrosion, Inhibition and Performance Assessment
  77. Galvanic Corrosion between Magnesium Alloys and Steel
  78. Three Dimensional Imaging of Light Metals Using Serial Block Face Scanning Electron Microscopy (SBFSEM)
  79. Anodizing of Aluminum in Sulfuric Acid/Boric Acid Mixed Electrolyte
  80. Plasma electrolytic oxidation of coupled light metals
  81. Interpretation of Electrochemical Noise Generated by Multiple Electrodes
  82. Revealing the three dimensional internal structure of aluminium alloys
  83. Optimization of anodizing cycles for enhanced performance
  84. Microstructural Modification Arising from Alkaline Etching and Its Effect on Anodizing Behavior of Al-Li-Cu Alloy
  85. Investigation of dealloying by ultra-high-resolution nanotomography
  86. Formation of protective anodic oxides on aluminium by low voltage anodising in sulphuric acid with cerium nitrate and tartaric acid additions
  87. Application of electrochemical noise analysis to corroding aluminium alloys
  88. Anodic film growth on Al–Li–Cu alloy AA2099-T8
  89. Anodic growth of titanium oxide: Electrochemical behaviour and morphological evolution
  90. Effects of current density and electrolyte temperature on the volume expansion factor of anodic alumina formed in oxalic acid
  91. Single-Step Fabrication of Metal Nanoparticle Loaded Mesoporous Alumina through Anodizing of a Commercial Aluminum Alloy
  92. Discontinuities in the porous anodic film formed on AA2099-T8 aluminium alloy
  93. Electrochemical noise analysis on multiple dissimilar electrodes: Theoretical analysis
  94. Glass-like CexOy sol–gel coatings for corrosion protection of aluminium and magnesium alloys
  95. Corrosion of dissimilar alloys: Electrochemical noise
  96. Reducing the energy cost of protective anodizing
  97. Anodic Film Formation on AA 2099-T8 Aluminum Alloy in Tartaric–Sulfuric Acid
  98. Volume Expansion Factor and Growth Efficiency of Anodic Alumina Formed in Sulphuric Acid
  99. Electrochemical Methods to Assist Corrosion Control of Lightweight Alloys
  100. Electrochemical techniques for practical evaluation of corrosion inhibitor effectiveness. Performance of cerium nitrate as corrosion inhibitor for AA2024T3 alloy
  101. Flow modulated ionic migration during porous oxide growth on aluminium
  102. Degradation of the corrosion resistance of anodic oxide films through immersion in the anodising electrolyte
  103. The behaviour of second phase particles during anodizing of aluminium alloys
  104. Preferential anodic oxidation of second-phase constituents during anodising of AA2024-T3 and AA7075-T6 alloys
  105. Influence of Applied Potential on Titanium Oxide Nanotube Growth
  106. Enrichment, incorporation and oxidation of copper during anodising of aluminium-copper alloys
  107. Influence of molybdate species on the tartaric acid/sulphuric acid anodic films grown on AA2024 T3 aerospace alloy
  108. Influence of water content on nanotubular anodic titania formed in fluoride/glycerol electrolytes
  109. Anodizing of Aluminum under Nonsteady Conditions
  110. Role of Tartaric Acid on the Anodizing and Corrosion Behavior of AA 2024 T3 Aluminum Alloy
  111. Modelling the anodizing behaviour of aluminium alloys in sulphuric acid through alloy analogues
  112. Graded Anodic Film Morphologies for Sustainable Exploitation of Aluminium Alloys in Aerospace
  113. Graded Anodic Films for Corrosion Protection of Aerospace Alloys: Anodizing Procedure and Corrosion Behaviour
  114. Incorporation of Gold into Porous Anodic Alumina Formed on an Al–Au Alloy
  115. Macroscopic and Local Filming Behavior of AA2024 T3 Aluminum Alloy during Anodizing in Sulfuric Acid Electrolyte