All Stories

  1. A brief compendium of water entry results derived from laboratory tests of various types of wall assemblies

    Article • MATEC Web of Conferences, January 2019, EDP Sciences

    Dr. Michael A Lacasse

  2. Evaluating the potential of freeze-thaw damage in internally insulated masonry under climate change using different models

    Article • MATEC Web of Conferences, January 2019, EDP Sciences

    Dr. Michael A Lacasse

  3. A uniform methodology to establish test parameters for watertightness testing

    Article • Building and Environment, May 2013, Elsevier

    Dr. Michael A Lacasse

  4. A uniform methodology to establish test parameters for watertightness testing part II: Pareto front analysis on co-occurring rain and wind

    Article • Building and Environment, May 2013, Elsevier

    Dr. Michael A Lacasse

  5. Condensation risk assessment on box windows: the effect of the window–wall interface

    Article • Journal of Building Physics, July 2012, SAGE Publications

    Dr. Michael A Lacasse

  6. Durability of Acrylic Sealants Applied to Joints of Autoclaved Lightweight Concrete Walls: Evaluation of Exposure Testing

    Article • December 2011, ASTM International

    Dr. Michael A Lacasse

  7. Durability of Acrylic Sealants Applied to Joints of Autoclaved Lightweight Concrete Walls: Evaluation of Exposure Testing

    Article • December 2011, ASTM International

    Dr. Michael A Lacasse

  8. Editorial

    Article • Proceedings of the Institution of Civil Engineers - Construction Materials, December 2011, ICE Publishing

    Dr. Michael A Lacasse

  9. Evaluation of Sealed Joint Performance for the Selection of Sealants Suitable for Use in Autoclaved Lightweight Concrete Panels

    Article • November 2011, ASTM International

    Dr. Michael A Lacasse

  10. Evaluation of Sealed Joint Performance for the Selection of Sealants Suitable for Use in Autoclaved Lightweight Concrete Panels

    Article • November 2011, ASTM International

    Dr. Michael A Lacasse

  11. Laboratory Tests of Window-Wall Interface Details to Evaluate the Risk of Condensation on Windows

    Article • Journal of Testing and Evaluation, January 2011, ASTM International

    Dr. Michael A Lacasse

  12. Experimental Assessment of Hygrothermal Properties of Wood-Frame Wall Assemblies—Moisture Content Calibration Curve for OSB Using Moisture Pins

    Article • Journal of ASTM International, January 2010, ASTM International

    Dr. Michael A Lacasse

  13. Drying Response of Wood-Frame Construction: Laboratory and Modeling

    Article • Journal of ASTM International, January 2010, ASTM International

    Dr. Michael A Lacasse

  14. An Investigation of Climate Loads on Building Façades for Selected Locations in the United States

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. Michael A Lacasse

  15. Water Penetration of Cladding Components—Results from Laboratory Tests on Simulated Sealed Vertical and Horizontal Joints of Wall Cladding

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. Michael A Lacasse

  16. Laboratory Tests of Water Penetration through Wall-Window Interfaces Based on U.S. Residential Window Installation Practice

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. Michael A Lacasse

  17. Residential fenestration installation and watertightness of the wall-window interface

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. Michael A Lacasse

  18. Assessing the Effectiveness of Wall-Window Interface Details to Manage Rainwater—Selected Results from Window Installation to a Wall Sheathed in Extruded Polystyrene

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. Michael A Lacasse

  19. Proposed method for calculating water penetration test parameters of wall assemblies as applied to Istanbul, Turkey

    Article • Building and Environment, July 2008, Elsevier

    Dr. Michael A Lacasse

  20. Water entry function of a hardboard siding-clad wood stud wall

    Article • Building and Environment, November 2005, Elsevier

    Dr. Michael A Lacasse

  21. A Review of Climate Loads Relevant to Assessing the Watertightness Performance of Walls, Windows, and Wall-Window Interfaces

    Article • Journal of ASTM International, January 2005, ASTM International

    Dr. Michael A Lacasse

  22. Developing a Performance-Based Joint Sealant Specification for Airport PCC Pavements

    Article • Journal of ASTM International, January 2004, ASTM International

    Dr. Michael A Lacasse

  23. Durability test method — Determination of changes in adhesion, cohesion and appearance of elastic weatherproofing sealants for high movement façade joints after exposure to artificial weathering

    Article • Matériaux et Constructions, December 2001, Springer Science + Business Media

    Dr. Michael A Lacasse

  24. Materials and technology for sustainable construction

    Article • Building Research & Information, November 1999, Taylor & Francis

    Dr. Michael A Lacasse

  25. Effect of Hot-Air Lance on Crack Sealant Adhesion

    Article • Journal of Transportation Engineering, July 1999, American Society of Civil Engineers (ASCE)

    Dr. Michael A Lacasse

  26. Sealant Degradation during Crack Sealing of Pavements

    Article • Journal of Materials in Civil Engineering, November 1998, American Society of Civil Engineers (ASCE)

    Dr. Michael A Lacasse

  27. The performance of elastomeric parking garage membrane systems

    Article • Construction and Building Materials, September 1998, Elsevier

    Dr. Michael A Lacasse

  28. Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing: Fifth Volume

    Article • January 1996, ASTM International

    Dr. Michael A Lacasse

  29. Lignin and Its Polyblends

    Article • Journal of Macromolecular Science Part A, August 1995, Taylor & Francis

    Dr. Michael A Lacasse

  30. Polymer–filler interaction in polyurethane kraft lignin polyblends

    Article • Journal of Applied Polymer Science, January 1994, Wiley

    Dr. Michael A Lacasse

  31. Mechanical characteristics of sealants based on polyurethane-lignin polyblends

    Article • Journal of Adhesion Science and Technology, January 1994, Taylor & Francis

    Dr. Michael A Lacasse

  32. Swelling and adhesion characteristics of lignin-filled polyurethane sealant

    Article • Journal of Adhesion Science and Technology, January 1994, Taylor & Francis

    Dr. Michael A Lacasse

  33. Recycling Lignin for Engineering Applications

    Article • MRS Proceedings, January 1992, Cambridge University Press

    Dr. Michael A Lacasse

  34. CP–MAS NMR spectra of polyurethane–lignin blends

    Article • Journal of Applied Polymer Science, September 1990, Wiley

    Dr. Michael A Lacasse

  35. Morphology of Lignin-Polyurethane Blends

    Article • MRS Proceedings, January 1989, Cambridge University Press

    Dr. Michael A Lacasse

  36. Morphology of Lignin-Polyurethane Blends

    Article • MRS Proceedings, January 1989, Cambridge University Press

    Dr. Michael A Lacasse

  37. Polyurethane-based sealants modified by blending with Kraft lignin

    Article • Journal of Applied Polymer Science, January 1988, Wiley

    Dr. Michael A Lacasse

  38. Lignin-polymer systems and some applications

    Article • Progress in Polymer Science, January 1986, Elsevier

    Dr. Michael A Lacasse

  39. Developing a Performance-Based Joint Sealant Specification for Airport PCC Pavements

    Article • ASTM International

    Dr. Michael A Lacasse

  40. Considerations for a Performance-Based Specification for Bituminous Crack Sealants

    Article • ASTM International

    Dr. Michael A Lacasse

  41. Movement During Cure of Latex Building Joint Sealants

    Article • ASTM International

    Dr. Michael A Lacasse

  42. Towards Standardization of Service Life Prediction of Roofing Membranes

    Article • ASTM International

    Dr. Michael A Lacasse

  43. Evaluating the Durability of Sealants

    Article • ASTM International

    Dr. Michael A Lacasse

  44. Sealant Selection Using an Expert System

    Article • ASTM International

    Dr. Michael A Lacasse

  45. Evaluation of Cyclic Fatigue as a Means of Assessing the Performance of Construction Joint Sealants: Polyurethane Sealants

    Article • ASTM International

    Dr. Michael A Lacasse

  46. Evaluation of Cyclic Fatigue as a Means of Assessing the Performance of Construction Joint Sealants: Silicone Sealants

    Article • ASTM International

    Dr. Michael A Lacasse

  47. Advances in Test Methods to Assess the Long-Term Performance of Sealants

    Article • ASTM International

    Dr. Michael A Lacasse

  48. An Examination of Yearly and Daily Temperature Change and Its Significance to the Evaluation of Sealant Performance

    Article • ASTM International

    Dr. Michael A Lacasse

  49. Laboratory Cyclic fatigue Test of Silicone Sealant Mini-Specimens

    Article • ASTM International

    Dr. Michael A Lacasse

  50. The Relative Effects of Deformation and Aging on Sealant Behavior

    Article • ASTM International

    Dr. Michael A Lacasse

  51. An Investigation of Climate Loads on Building Façades for Selected Locations in the United States

    Article • ASTM International

    Dr. Michael A Lacasse

  52. Laboratory Tests of Water Penetration through Wall-Window Interfaces Based on U.S. Residential Window Installation Practice

    Article • ASTM International

    Dr. Michael A Lacasse

  53. Assessing the Effectiveness of Wall-Window Interface Details to Manage Rainwater—Selected Results from Window Installation to a Wall Sheathed in Extruded Polystyrene

    Article • ASTM International

    Dr. Michael A Lacasse

  54. Towards Development of a Performance Standard for Assessing the Effectiveness of Wall-Window Interface Details to Manage Rainwater Intrusion

    Article • ASTM International

    Dr. Michael A Lacasse

  55. Drying Response of Wood-Frame Construction: Laboratory and Modeling

    Article • ASTM International

    Dr. Michael A Lacasse

  56. Experimental Assessment of Hygrothermal Properties of Wood-Frame Wall Assemblies—Moisture Content Calibration Curve for OSB Using Moisture Pins

    Article • ASTM International

    Dr. Michael A Lacasse

  57. Water Penetration of Cladding Components—Results from Laboratory Tests on Simulated Sealed Vertical and Horizontal Joints of Wall Cladding

    Article • ASTM International

    Dr. Michael A Lacasse

  58. A Review of Climate Loads Relevant to Assessing the Watertightness Performance of Walls, Windows, and Wall-Window Interfaces

    Article • ASTM International

    Dr. Michael A Lacasse