All Stories

  1. Thermal design and performance evaluation of GaN power stage in a 4-level totem-pole PFC

    Article • AEU - International Journal of Electronics and Communications, January 2024, Elsevier

    Mehmet Onur Gulbahce

  2. Equivalent Circuit Based Design Approach of Axial-Flux Induction Generator for Wind Turbines

    Article • September 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  3. LLC rezonans dönüştürücüsündeki hava aralıklı manyetik bileşenler için yeni bir optimizasyon yöntemi

    Article • Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, August 2023, Journal of the Faculty of Engineering and Architecture of Gazi University

    Mehmet Onur Gulbahce

  4. Neuromodel of an Eddy Current Brake for Load Emulation

    Article • Energies, April 2023, MDPI AG

    Mehmet Onur Gulbahce

  5. A Holistic Design Optimization Method for LLC Converters in Light Electric Vehicle Chargers

    Article • IEEE Transactions on Transportation Electrification, January 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  6. A New Optimization Method for Gapped and Distributed Core Magnetics in LLC Converter

    Article • IEEE Access, January 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  7. INVESTIGATION OF THE HEAT PERFORMANCE OF THE HALF-BRIDGE DEVELOPMENT BOARD WITH GAN POWER DEVICES

    Article • Mühendislik Bilimleri ve Tasarım Dergisi, June 2022, Muhendislik Bilimleri ve Tasarim Dergisi

    Mehmet Onur Gulbahce

  8. AKI VE KAYMA FREKANSI KESTİRİMİ İLE ASENKRON MOTORUN ALGILAYICISIZ SKALER HIZ DENETİMİ

    Article • Mühendislik Bilimleri ve Tasarım Dergisi, March 2022, Muhendislik Bilimleri ve Tasarim Dergisi

    Mehmet Onur Gulbahce

  9. ESTIMATION OF INDUCTION MOTOR EQUIVALENT CIRCUIT PARAMETERS FOR VECTOR CONTROLLED DRIVES FROM MANUFACTURER DATASHEET

    Article • Mühendislik Bilimleri ve Tasarım Dergisi, December 2021, Muhendislik Bilimleri ve Tasarim Dergisi

    Mehmet Onur Gulbahce

  10. A Comprehensive Disturbing Effect Analysis of Multi-Sectional Rotor Slot Geometry for Induction Machines in Electrical Vehicles

    Article • IEEE Access, January 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  11. Modelling of High Frequency Converter Transformer with Floating Active Inductor

    Article • Elektronika ir Elektrotechnika, December 2018, Publishing House Technologija

    Mehmet Onur Gulbahce

  12. Shielded axially slitted solid rotor design for high-speed solid rotor induction motors

    Article • IET Electric Power Applications, July 2018, the Institution of Engineering and Technology (the IET)

    Mehmet Onur Gulbahce

  13. Generalised Model of Multiphase Tesla’s Egg of Columbus and Practical Analysis of 3-Phase Design

    Article • Electrica, July 2018, AVES Publishing Co.

    Mehmet Onur Gulbahce

  14. A High-Speed Solid Rotor Induction Motor Design with Improved Efficiency and Decreased Harmonic Effect

    Article • IET Electric Power Applications, January 2018, the Institution of Engineering and Technology (the IET)

    Mehmet Onur Gulbahce

  15. A comprehensive approach to determining the speed/torque relationships of eddy current brakes

    Article • Electrical Engineering, August 2017, Springer Science + Business Media

    Mehmet Onur Gulbahce

  16. Nonideal analysis, design and voltage mode control of a boost converter

    Article • October 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  17. A performance comparison of different rotor types for high-speed induction motors

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  18. Design and finite element analysis of a radial-flux salient-pole eddy current brake

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  19. Design and optimization of an axially-slitted high-speed solid rotor induction motor

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  20. Novel rotor design for high-speed solid rotor induction machines

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  21. Performance investigation of extended Kalman filter based observer for PMSM using in washing machine applications

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  22. Tuning cascade PI(D) controllers in PMDC motor drives: A performance comparison for different types of tuning methods

    Article • November 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  23. Thermal vacuum chamber test of a DC-DC converter

    Article • June 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  24. A new approach for temperature rising test of an induction motor loaded by a current controlled eddy current brake

    Article • October 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  25. Design of a mechanical load simulator having an excitation current controlled eddy current brake

    Article • October 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  26. A study to determine the act of excitation current on braking torque for a low power eddy current brake

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce

  27. Determination of the effect of conductive disk thickness on braking torque for a low power eddy current brake

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Mehmet Onur Gulbahce