All Stories

  1. Advanced 3Y-TZP bioceramic doped with Al2O3 and CeO2 potentially for biomedical implant applications

    Article • Materials Technology, February 2019, Taylor & Francis

    Prof Dr Md Enamul Hoque, MIN HWEI NG

  2. Next Generation Biomimetic Bone Tissue Engineering Matrix From Poly (L- Lactic Acid) Pla/Calcium Carbonate Composites Doped With Silver Nanoparticles

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Prof Dr Md Enamul Hoque

  3. New Generation Antibacterial Nanofibrous Membrane for Potential Water Filtration

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Prof Dr Md Enamul Hoque

  4. Recent Advances in Silver Nanoparticle Containing Biopolymer Nanocomposites for Infectious Disease Control – A Mini Review

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Prof Dr Md Enamul Hoque

  5. Editorial: Biopolymers and Biocomposites: Chemistry and Technology

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Prof Dr Md Enamul Hoque, Dr Mohammad Jawaid

  6. Surface Modification of Advanced and Polymer Nanocomposites

    Article • January 2018, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  7. Development, optimization and characterization of a two step sol–gel synthesis route for ZnO/SnO2 nanocomposite

    Article • Journal of Materials Science Materials in Electronics, December 2017, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  8. Chemically stabilized reduced graphene oxide/zirconia nanocomposite: synthesis and characterization

    Article • Materials Research Express, November 2017, Institute of Physics Publishing

    Prof Dr Md Enamul Hoque

  9. Structural, optical and dielectric investigation of CdFe2O4 nanoparticles

    Article • Materials Research Express, July 2017, Institute of Physics Publishing

    Prof Dr Md Enamul Hoque

  10. Hydrothermal synthesis of zinc stannate nanoparticles spectroscopic investigation

    Article • Journal of Materials Science Materials in Electronics, April 2017, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  11. Interface Interaction of Jute Fiber Reinforced PLA Biocomposites for Potential Applications

    Article • January 2017, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  12. Reinforced Natural Rubber Nanocomposites: Next Generation Advanced Material

    Article • January 2017, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  13. Effect of nanofillers on the physico-mechanical properties of load bearing bone implants

    Article • Materials Science and Engineering C, October 2016, Elsevier

    Dr Suganti Ramarad, Prof Dr Md Enamul Hoque

  14. Sonosynthesis of cellulose nanoparticles (CNP) from kenaf fiber: Effects of processing parameters

    Article • Fibers and Polymers, September 2016, Springer Science + Business Media

    Prof Dr Md Enamul Hoque, Professor Dr SIVAKUMAR MANICKAM

  15. A Novel Vortex Tube-Assisted Atmospheric Freeze-Drying System: Effect of Osmotic Pretreatment on Biological Products

    Article • Journal of Food Process Engineering, July 2016, Wiley

    Prof Dr Md Enamul Hoque

  16. Rubber/Nanoclay Composites: Towards Advanced Functional Materials

    Article • January 2016, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  17. Conducting Polymers: Drug Delivery and Tissue Engineering

    Article • December 2015, Taylor & Francis

    Prof Dr Md Enamul Hoque

  18. Nanofibers: Drug Delivery

    Article • December 2015, Taylor & Francis

    Prof Dr Md Enamul Hoque

  19. Physical and mechanical characteristics of conventional dental porcelain: effects of exposure environments

    Article • Materials Letters, March 2015, Elsevier

    Prof Dr Md Enamul Hoque

  20. Manufacturing of Natural Fibre Reinforced Polymer Composites

    Article • January 2015, Springer Science + Business Media

    Dr Mohammad Jawaid, Professor S.M. Sapuan, Prof Dr Md Enamul Hoque

  21. Manufacturing of Coir Fibre-Reinforced Polymer Composites by Hot Compression Technique

    Article • January 2015, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  22. Applying Nature's Best Ideas to Biomimetics: Frog Calling

    Article • Journal of Applied Mechanical Engineering, January 2015, OMICS Publishing Group

    Prof Dr Md Enamul Hoque

  23. Introduction to Manufacturing of Natural Fibre-Reinforced Polymer Composites

    Article • January 2015, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  24. Critical Concerns on Manufacturing Processes of Natural Fibre Reinforced Polymer Composites

    Article • January 2015, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  25. Manufacturing of Natural Fibre-Reinforced Polymer Composites by Solvent Casting Method

    Article • January 2015, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  26. Effect of compatibilizers on in vitro biocompatibility of PLA–HA bioscaffold

    Article • Bioinspired Biomimetic and Nanobiomaterials, December 2014, ICE Publishing

    Prof Dr Md Enamul Hoque

  27. Physical, mechanical, and biodegradable properties of meranti wood polymer composites

    Article • Materials & Design (1980-2015), December 2014, Elsevier

    Prof Dr Md Enamul Hoque, Dr Mohammad Jawaid

  28. Current strategies in multiphasic scaffold design for osteochondral tissue engineering: A review

    Article • Journal of Biomedical Materials Research Part A, November 2014, Wiley

    Prof Dr Md Enamul Hoque

  29. The potential hazards of Aspergillus sp. in foods and feeds, and the role of biological treatment: A review

    Article • The Journal of Microbiology, October 2014, Springer Science + Business Media

    Prof Dr Md Enamul Hoque

  30. Fabrication and characterization of hybrid PCL/PEG 3D scaffolds for potential tissue engineering applications

    Article • Materials Letters, September 2014, Elsevier

    Prof Dr Md Enamul Hoque

  31. Engineering and Biomimetics: Harnessing Light Energy for Sustainability

    Article • Journal of Applied Mechanical Engineering, January 2014, OMICS Publishing Group

    Prof Dr Md Enamul Hoque

  32. Hybrid Nanofibre Matrix for Regenerative Therapy Fabricated by Electrospinning: Effects of Process Parameters on the Fibre Efficacy

    Article • Journal of Nanomedicine & Biotherapeutic Discovery, January 2014, OMICS Publishing Group

    Prof Dr Md Enamul Hoque

  33. Rapid Prototyping Technology in Bone Tissue Engineering

    Article • Journal of Applied Mechanical Engineering, January 2013, OMICS Publishing Group

    Prof Dr Md Enamul Hoque

  34. Electrospinning of Gelatin Nanofibre: Current Trends in Tissue Engineering Applications

    Article • Journal of Applied Mechanical Engineering, January 2013, OMICS Publishing Group

    Prof Dr Md Enamul Hoque

  35. Biodiesel from Plant Resources—Sustainable Solution to Ever Increasing Fuel Oil Demands

    Article • Journal of Sustainable Bioenergy Systems, January 2013, Scientific Research Publishing, Inc,

    Prof Dr Md Enamul Hoque

  36. Sago Starch-Mixed Low-Density Polyethylene Biodegradable Polymer: Synthesis and Characterization

    Article • Journal of Materials, January 2013, Hindawi Publishing Corporation

    Prof Dr Md Enamul Hoque

  37. Processing and Characterization of Cockle Shell Calcium Carbonate (CaCO3) Bioceramic for Potential Application in Bone Tissue Engineering

    Article • Journal of Material Science & Engineering, January 2013, OMICS Publishing Group

    Prof Dr Md Enamul Hoque

  38. Extrusion based rapid prototyping technique: An advanced platform for tissue engineering scaffold fabrication

    Article • Biopolymers, November 2011, Wiley

    Prof Dr Md Enamul Hoque

  39. Rapid Prototyping Technology - Principles and Functional Requirements

    Article • September 2011, IntechOpen

    Prof Dr Md Enamul Hoque

  40. Advanced Applications of Rapid Prototyping Technology in Modern Engineering

    Article • September 2011, IntechOpen

    Prof Dr Md Enamul Hoque

  41. Biodiesel from low cost feedstocks: The effects of process parameters on the biodiesel yield

    Article • Biomass and Bioenergy, April 2011, Elsevier

    Prof Dr Md Enamul Hoque

  42. Processing of Polycaprolactone and Polycaprolactone-Based Copolymers into 3D Scaffolds, and Their Cellular Responses

    Article • Tissue Engineering Part A, October 2009, Mary Ann Liebert Inc

    Dr Ming-Hsi Huang, Prof Dr Md Enamul Hoque