All Stories

  1. Palladium-Catalyzed Borylation of Aryl Halides in Water Using Poly (Ethylene Glycol)-Based Surfactants
  2. Effect of cation side-chain structure on the physicochemical properties of pyrrolidinium-based electrolytes upon mixing with sodium salt
  3. Defect mitigation via fullerene-based functional additives for enhanced efficiency and stability in tin perovskite solar cells
  4. Enhanced ion-transport characteristics of pyrrolidinium-based electrolytes with Mg(FSA)2
  5. Mitigating low-dimensional phases and defects with methylammonium chloride in high-performance Dion–Jacobson quasi-2D tin perovskite solar cells with power conversion efficiency over 6%
  6. Palladium-catalysed reactions in water using catalysts covalently tethered on a thermo-responsive polymer
  7. A Simple Regeneration Process Using a CO2‐Switchable‐Polarity Solvent for Cellulose Hydrogels
  8. Phase transition and ionic conductivity of pyrrolidinium-based ionic plastic crystals with magnesium salts
  9. Ruthenium-catalyzed Olefin Metathesis in Water using Thermo-responsive Diblock Copolymer Micelles
  10. Multiblock-copolymerisation-derived sulfonated-poly(p-phenylene)-based polymer electrolyte membranes with simultaneously enhanced proton conductivity and mechanical strength
  11. Phase transitions and ionic conductivity of ionic plastic crystals based on pyrrolidinium cations and dihydrogen phosphate anion
  12. Ion Conductive Behavior of Oligoether/Zwitterion Diblock Copolymers Containing Magnesium Salt
  13. Palladium-Catalyzed Mizoroki–Heck and Copper-Free Sonogashira Coupling Reactions in Water Using Thermoresponsive Polymer Micelles
  14. Bioresorbable porous β-tricalcium phosphate chelate-setting cements with poly(lactic-co-glycolic acid) particles as pore-forming agent: fabrication, material properties, cytotoxicity, and in vivo evaluation
  15. Simple and Fast One-Pot Cellulose Gel Preparation in Aqueous Pyrrolidinium Hydroxide Solution–Cellulose Solvent and Antibacterial Agent
  16. Polyether-Based Supramolecular Electrolytes With Two-Dimensional Boroxine Skeleton
  17. Oligoether/Zwitterion Diblock Copolymers: Synthesis and Application as Cathode-Coating Material for Li Batteries
  18. Perpendicularly oriented 2D perovskite thin films prepared using the bar-coating method and DMSO additive
  19. Asymmetric Reactions in Water Catalyzed by L-Proline Tethered on Thermoresponsive Ionic Copolymers
  20. Synthesis and Characteristics of Pyrrolidinium‐Based Organic Ionic Plastic Crystals with Various Sulfonylamide Anions
  21. Development of a novel cellulose solvent based on pyrrolidinium hydroxide and reliable solubility analysis
  22. Synthesis and investigation of sulfonated poly(p-phenylene)-based ionomers with precisely controlled ion exchange capacity for use as polymer electrolyte membranes
  23. Novel Organic–Inorganic Perovskite Compounds Having Phosphonium Groups
  24. Esterification of Cellulose in Protic Ionic Liquids
  25. Erratum to: Hydrogen isotope replacement changes hydration and large scale structure, but not small scale structure, of agarose hydrogel networks
  26. Hydrogen isotope replacement changes hydration and large scale structure, but not small scale structure, of agarose hydrogel networks
  27. Pyrrolidinium-based organic ionic plastic crystals: Relationship between side chain length and properties
  28. Palladium-catalyzed Mizoroki-Heck reactions in water using thermoresponsive polymer micelles
  29. Effect of β-Cyclodextrin on Physicochemical Properties of an Ionic Liquid Electrolyte Composed of N-Methyl-N-Propylpyrrolidinium bis(trifluoromethylsulfonyl)amide
  30. Factors determining the vertical orientation of two-dimensional perovskites
  31. Synthesis of pyrrolidinium-based plastic crystals exhibiting high ionic conductivity at ambient temperature
  32. Tuning the Structures and Optical Properties of Perovskites by Varying the Alkylamine Type and Chain Length
  33. Nitrosylruthenium Complexes as Polymerization Catalysts for Acrylonitrile in DMF
  34. Effect of Alkyl Chain Length in Anions on the Physicochemical Properties of Cellulose-Dissolving Protic Ionic Liquids
  35. Solvent polarity effects on supramolecular chirality of a polyfluorene‐thiophene copolymer
  36. Brønsted acidic ionic liquids for cellulose hydrolysis in an aqueous medium: structural effects on acidity and glucose yield
  37. Cellulose-dissolving protic ionic liquids as low cost catalysts for direct transesterification reactions of cellulose
  38. Use of [C4mim]Cl for efficient extraction of caffeoylquinic acids from sweet potato leaves
  39. Synthesis and evaluation of a novel pyrrolidinium-based zwitterionic additive with an ether side chain for ionic liquid electrolytes in high-voltage lithium-ion batteries
  40. Orientation Control of Two-Dimensional Perovskites by Incorporating Carboxylic Acid Moieties
  41. Extraction of Essential Oils of Lemon Grass Using Ionic Liquid
  42. Formamidine and cesium-based quasi-two-dimensional perovskites as photovoltaic absorbers
  43. Hydrophilic–hydrophobic diblock copolymers based on polyphenylenes for cathode ionomers of fuel cells
  44. Synthesis and Evaluation of Polybetaine-Type Ion Gel Electrolytes
  45. Use of a High-Performance Poly(p-phenylene)-Based Aromatic Hydrocarbon Ionomer with Superacid Groups in Fuel Cells under Low Humidity Conditions
  46. Improved Extraction Yield of Citral from Lemon Myrtle Using a Cellulose-Dissolving Ionic Liquid
  47. Effect of a pyrrolidinium zwitterion on charge/discharge cycle properties of Li/LiCoO2 and graphite/Li cells containing an ionic liquid electrolyte
  48. Physicochemical and electrochemical properties of N-methyl-N-methoxymethylpyrrolidinium bis(fluorosulfonyl)amide and its lithium salt composites
  49. Asymmetric Aldol and Michael Reactions in Water Using Organocatalysts Immobilized on a Thermoresponsive “Linear” Block Copolymer
  50. First-Principles Molecular Dynamics Study of a Hydrocarbon Copolymer for Use in Polymer Electrolyte Membrane Fuel Cells
  51. Small angle neutron scattering data of polymer electrolyte membranes partially swollen in water
  52. Elucidation of the morphology of the hydrocarbon multi-block copolymer electrolyte membranes for proton exchange fuel cells
  53. Improvement of charge/discharge properties of oligoether electrolytes by zwitterions with an attached cyano group for use in lithium-ion secondary batteries
  54. Ionic Liquid-mediated Extraction of Bilobalide from Ginkgo biloba Leaves
  55. Erratum to ‘Effect of zwitterions on electrochemical properties of oligoether-based electrolytes’ [Electrochim. Acta 175 (2015) 209–213]
  56. Effect of zwitterions on electrochemical properties of oligoether-based electrolytes
  57. Synthesis of Random Copolymers Containing Zwitterions and Their Evaluation as Electrolyte Materials
  58. In situ preparation of poly(l-lactic acid-co-glycolic acid)/hydroxyapatite composites as artificial bone materials
  59. A Plastic Electrolyte Material in a Highly Desirable Temperature Range: N-Ethyl-N-methylpyrrolidinium Bis(fluorosulfonyl)amide
  60. Synthesis and properties of hydrophilic–hydrophobic diblock copolymer ionomers based on poly(p-phenylene)s
  61. Asymmetric Aldol Reaction on Water Using an Organocatalyst Tethered on a Thermoresponsive Block Copolymer
  62. Boronic Acid-containing Ionic Liquid: Synthesis, Thermal Properties, and Conductivity
  63. Synthesis of Optically Active Regioregular Polythiophenes and Their Self-Organization at the Air–Water Interface
  64. DNA-templated Fabrication of Biphasic Calcium Phosphate Ceramics with a Bimodal Pore Structure for Tissue Engineering
  65. PFG-NMR and SANS Studies in Cation Exchange Membranes Based on Sulfonated Polyphenylene Multiblock Copolymers
  66. Synthesis and Proton Exchange Membrane Application of Aromatic Diblock Copolymer Electrolytes
  67. Synthesis of Hydrocarbon Ionomer Materials and Evaluations of MEA
  68. In situ Preparation of Poly(L-lactic acid)/hydroxyapatite Composites as Artificial Bone Materials
  69. Synthesis and Properties of Sulfonated Poly(phenylene) Polymer Electrolytes with Various Side Chains
  70. Synthesis and Properties of Sulfonated Poly[(4-phenoxybenzoyl)-1,4-phenylene-co-anthraquinone]
  71. Construction of novel quantum-confined structure with lead halide/gemini surfactant hybrids
  72. Highly Efficient Circularly Polarized Light Emission in the Green Region from Chiral Polyfluorene–Thiophene Thin Films
  73. Synthesis of Hydrophilic–Hydrophobic Block Copolymer Ionomers Based on Polyphenylenes
  74. Synthesis and Fabrication of Aligned Conjugated Polymer Thin Films
  75. Considerations of polymerization method and molecular weight for proton-conducting poly(p-phenylene) derivatives
  76. Fabrication of Organic-Inorganic Nano-Hybrid Materials Containing Oligothiophene Derivatives
  77. Synthesis and Characterization of Organic-Inorganic Layered Perovskite Compounds Using Fullerene Derivatives
  78. Synthesis and Characterization of Polythiophenes Having Phosphonate Ester Groups
  79. Extraction and isolation of shikimic acid from Ginkgo biloba leaves utilizing an ionic liquid that dissolves cellulose
  80. Low-melting zwitterion: effect of oxyethylene units on thermal properties and conductivity
  81. Proton transport properties in an ionic liquid having a hydroxyl group
  82. Fabrication of biodegradable .BETA.-tricalcium phosphate/poly(L-lactic acid) hybrids and their in vitro biocompatibility
  83. Preparation and characterization of multilayer-type electrolyte membranes with hydrocarbon polymers
  84. Optical properties of polyfluorene–thiophene copolymers having chiral side chains
  85. Synthesis and optical properties of poly(thiophene-fluorene) copolymers with benzothiazole moiety
  86. Relationship between structure and optoelectrical properties of organic–inorganic hybrid materials containing fullerene derivatives
  87. Hydration behavior of perfluorinated and hydrocarbon-type proton exchange membranes: Relationship between morphology and proton conduction
  88. Lipase‐catalyzed polymerization of L‐lactide in ionic liquids
  89. Molecular recognition of Langmuir–Blodgett polymer films containing uracil groups
  90. Surface Morphology and Proton Conduction Imaging of Nafion Membrane
  91. Synthesis and Properties of Hydrocarbon Polymer Electrolytes
  92. Ring-opening Bulk Polymerization of l-Lactide in Porous Hydroxyapatite
  93. Systematic Studies on Chain Lengths, Halide Species, and Well Thicknesses for Lead Halide Layered Perovskite Thin Films
  94. Fabrication and evaluation of actuators based on polymer electrolyte membranes
  95. Self-assembled multilayer films based on functionalized poly(thiophene)s
  96. Spectral shape of photoluminescence in luminescent π conjugated polymers
  97. Synthesis and optical properties of poly(thiophene) derivatives with benzothiazole moiety
  98. Synthesis of optically active regioregular poly(thiophene)
  99. Fabrication and characterization of organic–inorganic perovskite films containing fullerene derivatives
  100. Fabrication of polycondensed multilayer thin films by a self-assembly method
  101. Proton conductivity of smart membranes based on hydrocarbon polymers having phosphoric acid groups
  102. Hydrothermal Synthesis and Structure of Zero-dimensional Organic–inorganic Perovskites
  103. Intercalated formation of two-dimensional and multi-layered perovskites in organic thin films
  104. Polymer Network Fabricated by Topochemical Polymerization of Self-assembly Films Composed of a Diacetylene Derivative
  105. Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines
  106. Synthesis of High-performance Composites of Poly(4-vinylpyridine-co-styrene) Copolymer (P4VPy–St) and Polyimides (PI) Having Carboxyl Pendant Groups by in-situ Polymerization and Their Mechanical Properties
  107. Molecular design of layered zirconium phosphonates for fuel cell applications
  108. Preparation and Optical Characterizations of Optically Active Quantum Well Films Consisting of Organic-Inorganic Layered Perovskite Compounds
  109. Coexistence of photoluminescence from two intrachain states in polythiophene films
  110. Architecture and optical properties of two-dimensional perovskite compounds containing fluoroamines
  111. Architecture and surface morphology of organic-inorganic hybrid compounds
  112. Enzymatic synthesis of poly(aniline) particles
  113. Fabrication and electrical properties of proton conducting polymer hybridized with apatite compounds
  114. Fabrication of polymeric thin films by a self-assembly method
  115. Regiocontrolled synthesis of poly(thiophene) derivatives with fluoroalkyl side chains
  116. Synthesis and evaluation of phosphonated poly(4-phenoxybenzoyl-1,4-phenylene)
  117. Synthesis of fullerene containing cyano group and formation of the metal complexes
  118. Synthesis of novel proton conducting polymer electrolytes containing phosphoric acid
  119. Thermochromic and solvatochromic properties of poly(thiophene) derivatives with liquid crystal moiety
  120. Fabrication of two-dimensional layered perovskite [NH3(CH2)12NH3]PbX4 thin films using a self-assembly method
  121. Properties of selected sulfonated polymers as proton-conducting electrolytes for polymer electrolyte fuel cells
  122. Photovoltaic Effect in Schottky Junction of Poly(3-alkylthiophene)/Al with Various Alkyl Chain Lengths and Regioregularities
  123. Crystal Structure and Optical Properties of C 10 H 10 N 2 PbBr 4 and C 10 H 22 N 2 PbBr 4
  124. Crystal Structure and Optical Properties of C 10 H 10 N 2 PbBr 4 and C 10 H 22 N 2 PbBr 4
  125. Novel Organic-Inorganic Hybrid Compounds Containing Alkyldiammonium Salts
  126. Novel Organic-Inorganic Hybrid Compounds Containing Alkyldiammonium Salts
  127. Preparation of Organic-Inorganic Hybridized Materials using Photopolymerization
  128. Synthesis of Novel Organic-Inorganic Self-Organized Compounds Containing Quaternary Ammonium Ions and its Structural Characterization
  129. Synthesis of Novel Organic-Inorganic Self-Organized Compounds Containing Quaternary Ammonium Ions and its Structural Characterization
  130. Incorporation of conjugated polydiacetylene systems into organic–inorganic quantum-well structures
  131. Photoluminescence from the Even-Parity State in Polythiophene Derivative
  132. Photocarrier Transport in Regioregular Poly(3-octadecylthiophene)
  133. Photocarrier transports related to the morphology of regioregular poly(3-hexylthiophene) films
  134. Crystal structure and optical properties of novel one-dimensional organic-inorganic hybrid compounds
  135. Dispersivity of carrier transport related with molecular arrangement in regioregular poly(3-alkylthiophene)
  136. Photocarrier transport in processable poly(3-alkylthiophene)
  137. Photovoltaic cell using high mobility poly(alkylthiophene)s and TiO2
  138. Poly(3-butylthiophene) : conjugated polymer with record high TOF mobility
  139. Regiocontrolled synthesis of poly(thiophene) derivatives: EL devices utilizing chiral poly(thiophene) derivatives
  140. Control of Poly(styrene) Particles Size by In-Situ Polymerization
  141. Effects of regioregularity on carrier transport in poly(alkylthiophene) films with various alkyl chain lengths
  142. Radiative transition from even-parity state in conjugated polymer
  143. Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers
  144. Synthesis and proton conductivity of sulfopropylated poly(benzimidazole) films
  145. Alkyl Chain Length Dependence of Field-Effect Mobilities in Regioregular Poly(3-Alkylthiophene) Films
  146. Preparation and characterization of natural lower dimensional layered perovskite-type compounds
  147. DISTRIBUTION OF THE EFFECTIVE CONJUGATION LENGTH OF POLYTHIOPHENE DETERMINED BY ITS ABSORPTION AND |χ(3)| SPECTRA
  148. Regioregularity vs Regiorandomness: Effect on Photocarrier Transport in Poly(3-hexylthiophene)
  149. Ion conductivity of poly(ethylene oxide)/ligand complexes with the hydrogen-bond interaction
  150. Relationship between absorbed water and proton conductivity in sulfopropylated poly(benzimidazole)
  151. Synthesis and proton conductivity of thermally stable polymer electrolyte: poly(benzimidazole) complexes with strong acid molecules
  152. Synthesis of Novel Self-Organized Organic/Inorganic Layered Compound Using a Quaternary Dialkylammonium.
  153. Synthesis of proton conducting polymer based on poly(silamine)
  154. Time-of-Flight Photocarrier Mobility in Langmuir-Blodgett Films of Regioregular Poly(3-hexylthiophene)
  155. Photocarrier Mobility in Regioregular Poly(3-hexylthiophene) Studied by the Time of Flight Method
  156. Scanning Tunneling Microscopy (STM) Study on Morphology of Regioregular Poly(3-alkylthiophene) Deposited on A(111) Surface
  157. Super-fine particles of poly(styrene-co-methyl methacrylate) by dispersion copolymerization
  158. Fullerene/phthalocyaninatometal complex and their LB films
  159. Self-organized properties of conductive Langmuir-Blodgett films
  160. Fabrication and properties of self-assembled films of poly(thiophene) derivatives
  161. Structure and properties of chiral poly(3-substituted thiophene) langmuir-blodgett films
  162. Self-Organization and Opto-Electrical Properties of Poly (3-Alkylthiophene) Langmuir-Blodgett Films
  163. Novel highly ordered Langmuir–Blodgett films of regioregular poly(3-substituted thiophene)
  164. Estimate of the effective conjugation length of polythiophene from its|χ(
  165. Fabrication of chiral poly(thiophene) Langmuir–Blodgett films
  166. Langmuir–Blodgett films manipulation of regioregular poly(3-alkylthiophene)s
  167. Self-assembling formation of a [2] catenane consisting of cyclobis (4,4″-azopyridinium-p-phenylene) and bis-p-phenylene-34-crown-10
  168. Ultrafast Excitonic Nonlinearity in Regioregular Head-to-Tail Coupled Poly(3-Hexylthiophene)
  169. Proton-conducting polymers derived from poly(ether-etherketone) and poly(4-phenoxybenzoyl-1,4-phenylene)
  170. Photochromic, Electrochemical, and Photoelectrochemical Properties of Novel Azopyridinium Derivatives
  171. Electrochemical and sensing properties of enzyme-polypyrrole multicomponent electrodes
  172. Charge transfer interactions of cyclobis(azopyridinium-phenylene) and hydroquinone derivatives
  173. Fabrication and electrical properties of fullerene/phthalocyaninatometal Langmuir-Blodgett films
  174. Formation of azopyridine/phthalocyaninatoiron complexes on the air-water interface and electrical properties of their Langmuir-Blodgett films
  175. Electrical properties of iodine-doped materials comprised of (phthalocyaninato)iron and azopyridines
  176. Self-organization and electrical properties of Head-to-Tail poly(3-hexyithiophene)
  177. Structure and electrical properties of multilayer thin films consisting of polypeptide and metal phthalocyanines
  178. Synthesis, electrochemical, and electrical properties of (phthalocyaninato)iron complexes with azopyridines
  179. Third-order optical nonlinearity in regioregular head-to-tail coupled poly(3-Hexylthiophene)
  180. Third-order optical nonlinearity in regioregular head-to-tail coupled poly(3-Hexylthiophene)
  181. Synthesis and charge transfer interactions of cyclobis(4,4′-azopyridinium-p-phenylene)
  182. Electrical properties of conductive Langmuir-Blodgett films comprised of head-to-tail poly (3-hexylthiophene)
  183. Micro-Composites of Poly(styrene) and Nylon 3 by in-situ Polymerization
  184. Synthesis of high-performance composites by in situ polycondensation and their mechanical properties
  185. High conducting Langmuir-Blodgett films comprising head-to-tail poly (3-hexylmiophene)
  186. NEW NLO POLYMERS FOR SECOND AND THIRD HARMONIC GENERATIONS
  187. Synthesis of poly[2-(N,N-dimethyl)aminoethyl methacrylate-co-acrylonitrile]
  188. Bisaxially coordinated (phthalocyaninato) metal compounds with azobispyridine
  189. Super ion conducting polymers for solid polymer electrolytes
  190. Synthesis of poly[2-(N,N-dimethyl)aminoethyl methacrylate-co-acrylonitrile]
  191. In-Situ Polycondensation for Synthesis of Composites of Elastomeric Polymers and Poly(γ-methyl L-glutamate)
  192. Fabrication of Langmuir-Blodgett films of poly(3-hexylthiophene) and metal-substituted phthalocyanines
  193. Vinyl functionalized Langmuir-Blodgett films fabricated from electrically conductive poly(bromooctylthiophene-co-vinylhexylthiophene)
  194. Control of Particle Size of Polystyrene Microspheres by Morphological Changes of Matrix Polymer.
  195. Polymers and Environment I. Enzymatic Degradations of Polyamides Containing L-Lysine.
  196. An FT-IR investigation of the influence of doping on the molecular organization of Langmuir-Blodgett thin films containing poly(3-hexylthiophene)
  197. Fabrication of electrically conductive Langmuir-Blodgett films comprised of poly(3-hexylthiophene) and nickel tetra-tert-butyl phthalocyanine
  198. New developments in the Langmuir-Blodgett manipulation of electroactive polymers
  199. Effects of polymer structure and incorporated salt species on ionic conductivity of polymer complexes formed by aliphatic polyester and alkali metal thiocyanate
  200. Evaluation of ionic mobility and transference number in a polymeric solid electrolyte by isothermal transient ionic current method
  201. Ionic conductivity of polymer complexes formed by poly(ethylene succinate) and lithium perchlorate
  202. Temperature dependence of even-parity and odd-parity states in luminescent conjugated polymers