All Stories

  1. Removal of Kerosene from Wastewater: Current Trends and Emerging Perspectives for Environmental Remediation
  2. Green CO2 Capture from Flue Gas Using Potassium Carbonate Solutions Promoted with Amino Acid Salts
  3. Innovation in the Use of Recycled and Heat-Treated Glass in Various Applications: Mechanical and Chemical Properties
  4. Copper Ion Removal by Adsorption Using Fly Ash-Based Geopolymers: Process Optimization Insights from Taguchi and ANOVA Statistical Methods
  5. Composite Materials with Glass Fiber Waste and Blast Furnace Slag
  6. Thermal energy storage performance evaluation of bio-based phase change material/apricot kernel shell derived activated carbon in lightweight mortar
  7. Applications of Recycled and Crushed Glass (RCG) as a Substitute for Natural Materials in Various Fields—A Review
  8. Capitalization of tires waste as derived fuel for sustainable cement production
  9. Accumulation of Heavy Metal Ions from Urban Soil in Spontaneous Flora
  10. Intensification of the photodegradation efficiency of an emergent water pollutant through process conditions optimization by means of response surface methodology
  11. Photocatalytic Removal of Antibiotics from Wastewater Using the CeO2/ZnO Heterojunction
  12. STUDY OF MICROALGAE INFLUENCE ON CARBON CAPTURE FROM GASEOUS STREAMS WITHIN THE BIOTRICKLING FILTRATION PROCESS
  13. Studies on the Removal of Congo Red Dye by an Adsorbent Based on Fly-Ash@Fe3O4 Mixture
  14. Development, characterization, and performance analysis of shape‐stabilized phase change material included‐geopolymer for passive thermal management of buildings
  15. Development and Characterization of a Novel Soil Amendment Based on Biomass Fly Ash Encapsulated in Calcium Alginate Microspheres
  16. Enhancing the TiO2-Ag Photocatalytic Efficiency by Acetone in the Dye Removal from Wastewater
  17. Biosorption Potential of Microbial and Residual Biomass of Saccharomyces pastorianus Immobilized in Calcium Alginate Matrix for Pharmaceuticals Removal from Aqueous Solutions
  18. Biosorptive Removal of Ethacridine Lactate from Aqueous Solutions by Saccharomyces pastorianus Residual Biomass/Calcium Alginate Composite Beads: Fixed-Bed Column Study
  19. Recent advances in removal of Congo Red dye by adsorption using an industrial waste
  20. Excellent ambient oxidation and mineralization of an emerging water pollutant using Pd-doped TiO 2 photocatalyst and UV-A irradiation
  21. Production and characterization of natural clay-free green building brick materials using water treatment sludge and oak wood ash
  22. Using Fly Ash Wastes for the Development of New Building Materials with Improved Compressive Strength
  23. Encapsulation of Saccharomyces pastorianus Residual Biomass in Calcium Alginate Matrix with Insights in Ethacridine Lactate Biosorption
  24. Removal of Toxic Copper Ion from Aqueous Media by Adsorption on Fly Ash-Derived Zeolites: Kinetic and Equilibrium Studies
  25. New construction materials synthesized from water treatment sludge and fired clay brick wastes
  26. Application of Saccharomyces cerevisiae/Calcium Alginate Composite Beads for Cephalexin Antibiotic Biosorption from Aqueous Solutions
  27. Performance assessment of five adsorbents based on fly ash for removal of cadmium ions
  28. ASYMMETRIC CELLULOSE ACETATE MEMBRANES USED IN SEPARATION APPLICATIONS
  29. FLY ASH MAGNETIC ADSORBENT FOR CADMIUM ION REMOVAL FROM AN AQUEOUS SOLUTION
  30. Adsorption Performance of Modified Fly Ash for Copper Ion Removal from Aqueous Solution
  31. Magnetic Solid-Phase Extraction of Cadmium Ions by Hybrid Self-Assembled Multicore Type Nanobeads
  32. TiO2/Fly Ash Nanocomposite for Photodegradation of Organic Pollutant
  33. Eco-friendly Nano-adsorbents for Pollutant Removal from Wastewaters
  34. Fly Ash Coated with Magnetic Materials: Improved Adsorbent for Cu (II) Removal from Wastewater
  35. TiO2 Doped with Noble Metals as an Efficient Solution for the Photodegradation of Hazardous Organic Water Pollutants at Ambient Conditions
  36. In-situ filler loading vs. conventional filler
  37. Zn/La Mixed Oxides Prepared by Coprecipitation: Synthesis, Characterization and Photocatalytic Studies
  38. Viscosity of potassium carbonate solutions promoted by new amines
  39. Eco-Friendly Materials Obtained by Fly Ash Sulphuric Activation for Cadmium Ions Removal
  40. Doping Titanium Dioxide with Palladiun for Enhancing thePhotocatalytic Decontamination and Mineralization of a Refractory Water Pollutant
  41. Eco-friendly Nano-adsorbents for Pollutant Removal from Wastewaters
  42. TiO2/Fly Ash Nanocomposite for Photodegradation of Organic Pollutant
  43. Analcime-bearing rocks as advanced sorbents
  44. TiO2/Fly Ash Nanocomposite for Photodegradation of Organic Pollutant
  45. Bismuth-Doped Nanohydroxyapatite Coatings on Titanium Implants for Improved Radiopacity and Antimicrobial Activity
  46. Biogeosorbents for solving ecological problems
  47. Preparation and Properties of Ceramic Materials from Coal Fly Ash
  48. New Approaches in Modeling and Simulation of CO2 Absorption Reactor by Activated Potassium Carbonate Solution
  49. Clay- and zeolite-based biogeosorbents: modelling and properties
  50. Efficiency Evaluation for Titanium Dioxide-Based Advanced Materials in Water Treatment
  51. NEW TiO2-Ag NANOPARTICLES USED FOR ORGANIC COMPOUNDS DEGRADATION
  52. Investigation on hydroxyapatite coatings formation on titanium surface
  53. Synthesis and characterisation of a binder cement replacement based on alkali activation of fly ash waste
  54. SYNTHESIS OF ZnO/CuO NANOCOMPOSITES WITH CNF AND Ag BY GEL SOL
  55. Studies on adsorption of oxytetracycline from aqueous solutions onto hydroxyapatite
  56. Cerium-doped hydroxyapatite/collagen coatings on titanium for bone implants
  57. PREPARATION AND CHARACTERIZATION OF NANOCOMPOSITE MATERIAL BASED ON TiO2-Ag FOR ENVIRONMENTAL APPLICATIONS
  58. EFFECTIVENESS FACTOR APPROACH FOR CHEMICAL ABSORPTION PROCESS
  59. NEW ADSORBENT MATERIALS ON THE BASE OF ASH AND LIME FOR LEAD REMOVAL
  60. Power plant wastes capitalization as geopolymeric building materials
  61. Removal of oxytetracycline from aqueous solutions by hydroxyapatite as a low-cost adsorbent
  62. ASSESSMENT OF GROUNDWATER AND SURFACE WATER CONTAMINATION BY LANDFILL LEACHATE: A CASE STUDY IN NEAMT COUNTY, ROMANIA
  63. New trends in the mechanisms of increasing productivity of mineral-based materials
  64. Influence of Tire Waste over Durability of Polymer Concrete
  65. Retention of barium and europium radionuclides from aqueous solutions on ash-based sorbents by application of radiochemical techniques
  66. Synthesis of Zeolite from Fly Ash and their Use as Soil Amendment
  67. Kinetic and equilibrium studies on adsorption of Reactive Blue 19 dye from aqueous solutions by nanohydroxyapatite adsorbent
  68. Removal of Zn(II) ions from aqueous media on thermal activated sawdust
  69. Retention of cesium from aqueous solutions using synthetic zeolites produced from power plant ash
  70. Use of the Information Concerning the Products Manufacturing in Innovative Learning and Education Programme for Health Care Sector
  71. Structure and Strength of Flocs of Precipitated Calcium Carbonate Induced by Various Polymers Used in Papermaking
  72. Removal of cadmium(II) from aqueous solution by adsorption onto modified algae and ash
  73. A NEW STRATEGY FOR PENTACHLOROPHENOL MONITORING IN WATER SAMPLES USING ULTRA-HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - MASS SPECTROMETRY TANDEM
  74. New materials synthesized from ash under moderate conditions for removal of toxic and radioactive metals
  75. An Overview on Assistive Technology Training Courses for Salespersons
  76. A low-cost sorbent for removal of copper ions from wastewaters based on sawdust/fly ash mixture
  77. Acid Black 172 dye adsorption from aqueous solution by hydroxyapatite as low-cost adsorbent
  78. Removal of Astrazone Blue from aqueous solutions onto brown peat. Equilibrium and kinetics studies
  79. Neuro-evolutionary optimization methodology applied to the synthesis process of ash based adsorbents
  80. Uranium removal from aqueous solutions by raw and modified thermal power plant ash
  81. Prediction of properties of polymer concrete composite with tire rubber using neural networks
  82. Obtaining and Utilizing Cellulose Fibers with in-Situ Loading as an Additive for Printing Paper
  83. Removal of Reactive Blue 204 Dye from Aqueous Solutions by Adsorption Onto Nanohydroxyapatite
  84. Behaviour of short polymer-high strength concrete columns under eccentric compression
  85. Influence of Different Additions on Frost-Thaw and Chemical Resistance of Polymer Concrete
  86. Removal of heavy metal ions from aqueous solutions using low-cost sorbents obtained from ash
  87. Low cost adsorbents obtained from ash for copper removal
  88. Using Neural Networks for Prediction of Properties of Polymer Concrete with Fly Ash
  89. HOMOGENEOUS AREAS DELIMITATION BY CONSIDERING THE ENERGY DEMAND FOR PLANTS GROWING IN COVERED SPACES
  90. IMPROVING SOIL QUALITY BY ADDING MODIFIED ASH
  91. SIMULTANEOUS REMOVAL OF ASTRAZONE BLUE AND LEAD ONTO LOW COST ADSORBENTS BASED ON POWER PLANT ASH
  92. Comparison of Mechanical Properties for Polymer Concrete with Different Types of Filler
  93. CaCO3 CONTROLLABLE SYNTHESIS BY DOUBLE EXCHANGE METHOD USING CaCl2 RESIDUAL SOLUTIONS
  94. Obtaining and Characterization of the Polymer Concrete with Fly Ash
  95. STUDY OF MORPHOLOGY FOR GEOPOLYMER MATERIALS OBTAINED FROM FLY ASH
  96. UTILIZATION OF COAL FLY ASH FROM POWER PLANTS
  97. WASTES USED IN OBTAINING POLYMER COMPOSITE
  98. UTILIZATION OF COAL FLY ASH FROM POWER PLANTS - I. ASH CHARACTERIZATION