All Stories

  1. Ogden and Mooney-Rivlin hyperelastic models comparison in porcine lobular tissue
  2. MOF-based composite for methylene blue removal in wastewater
  3. Electrochemical behaviour of the Al-20Mg alloy in synthetic seawater with alkaline pH
  4. Synthesis and characterization of Ag–ZrO2-BG/PMMA scaffolds for tissue engineering applications
  5. Friction Coefficient Dynamics of Tribological Coatings from Engine Lubricants: Analysis and Interpretation
  6. Synthesis and characterization of MCC–GO and MCC–rGO composites for methylthionine chloride remotion from wastewater
  7. Synthesis and characterization of nanostructured material based on cellulose acetate and nickel aluminate spinel from cigarette filters and aluminum foil
  8. Corrosion assessment of an Al–Li–Ni–Sb–Ag base alloy in aqueous solutions
  9. Characterization and Evaluation of Composite Biomaterial Bioactive Glass–Polylactic Acid for Bone Tissue Engineering Applications
  10. Development of Bioactive Glass-Collagen-Hyaluronic Acid-Polycaprolactone Scaffolds for Tissue Engineering Applications
  11. Óxido de grafeno en una matriz polimérico-cerámica: análisis de las propiedades mecánicas a compresión.
  12. Assessment of the adhesion and corrosion resistance of PMMA-SiO2 coatings in synthetic seawater
  13. Synthesis and characterization of polylactic/polycaprolactone/hydroxyapatite (PLA/PCL/HAp) scaffolds
  14. Effect of temperature on the corrosion behavior of a superplastic Zn–Al–Ag alloy in acid rain solution
  15. Chemical synthesis of Al2O3–Fe2O3 powders added to a PCL matrix
  16. Corrosion behaviour of Al–20Cu intermetallic alloy in synthetic sea water
  17. Corrosion Assessment of Fe-Ni-Al Based Alloy in Saline Solution
  18. Assessment of the Corrosion Behavior of FeAl Based Intermetallics in NaCl Solution
  19. Anticorrosive Effect of the Size of Silica Nanoparticles on PMMA-Based Hybrid Coatings
  20. Al-Mg Alloys prepared by Mechanically Alloying Reinforced with Carbon Nanotubes and their Corrosion Behavior in Bioethanol
  21. Evaluation of Corrosion of a Fe-40Al-2RE Intermetallic Alloy in NS4 Solution
  22. Evaluation of the electrochemical behavior of TiO2/Al2O3/PCL composite coatings in Hank's solution
  23. Wind speed variability study based on the Hurst coefficient and fractal dimensional analysis
  24. Proposed methodology for coating defect and location in buried pipelines from frequency signal data applied in field conditions
  25. Hyperelastic characterization of synthetic mesh for abdominal wall hernia repair
  26. Development of a hybrid metal-oxides (Li2O-Al2O3-Al3Fe-Al3Fe5O12) reinforced polycaprolactone composite
  27. Synthesis and characterization of nickel aluminate nanoparticles
  28. Electrochemical Evaluation of Nanostructured Thin Films Formed By Polycaprolactone-Fe2O3-Al2O3 Composites in Hank Solution
  29. Hot Corrosion Study of TiO2-ZrO2 Coating on Inconel 601 Alloy in NaVO3 Molten Salt
  30. Ag-Nb nanoscale multilayer study by global energy minimization
  31. Microstructural Evaluation of a Zn-Al-Ag Alloy
  32. Corrosion study of Al–Fe (20 wt-%) alloy in artificial sea water with NaOH additions
  33. Corrosion Behavior of Fe-40at.%Al-Based Intermetallic in 0.25 M H2SO4 Solution
  34. Effect of Chloride and Sulfate Ions on the SCC of API-X70 Pipeline Welds in Diluted Carbonated Solutions
  35. Oxidation behaviour of Fe–40 at.-% Al intermetallics with Li or Cu additions at high temperature
  36. Chemical Reduction Synthesis of Iron Aluminum Powders
  37. Corrosion Study of Al-Fe (20 wt%) Alloy in Seawater Alkaline Solutions
  38. Casting Fe–Al-based intermetallics alloyed with Li and Ag
  39. Evaluation of osteogenic markers in the differentiation of murine preosteoblasts during the interaction with polyurethane/nanohydroxyapatite biomaterials
  40. Transmission Line Modeling Applied to Hot Corrosion of Fe-40at.pctAl in Molten LiCl–KCl
  41. Insights Into Oxygen Adsorption on Ag–Cu Nanocluster as an Oxidation Catalyst by Ab Initio Atomistic Thermodynamics
  42. electrochemical behavior of hybrid coatings
  43. SCC of X-65 Weldment Assessment in Diluted NaHCO3 Solutions with Chloride and Sulfate Ions
  44. Design and construction of a brain-computer interface for applications in neuro-robotics
  45. Enhanced Corrosion Resistance in Artificial Saliva of Ti6Al4V with ZrO2Nanostructured Coating
  46. Characterisation of soil/pipe interface at a pipeline failure after 36 years of service under impressed current cathodic protection
  47. Synthesis of Synthetic Hematite with Substituted Aluminum by Sol-Gel Method
  48. Phase Evaluation and its Hydrogen Correlation of the FeAl3 and FeAl2 Intermetallic Alloys during Mechanical Ball-Milling with Water
  49. Hydrogen Binding on Small Pt—Au Bimetallic Clusters
  50. Removal of Graffiti from Morelia’s Quarry Stone by High Power Diode Laser
  51. High-Energy Ball-Milling of FeAl2 and Fe2Al5 Intermetallic Systems
  52. Effect of Li and Cu addition on corrosion of Fe–40at.% Al intermetallics in molten LiCl–KCl eutectic salt
  53. Evaluation of Sulfidation Resistance of Atomized Fe40Al Based Intermetallics
  54. Synthesis of Biodegradable Composite for Knee Cartilage Prosthesis Joint
  55. Effect of Minor Alloying Elements on the Corrosion Behavior of Fe40Al in NaCl-KCl Molten Salts
  56. Evaluation of SCC susceptibility of supermartensitic stainless steel using slow strain rate tests
  57. Assessment of pH and temperature effects on stress corrosion cracking of 1018 low carbon steel
  58. Structural Stability and Transformation of Pt-Ru Bimetallic Nano Clusters: A Study of Modified Embedded Atom Method
  59. Fracture Behavior on SCC of API X52 Pipeline Steel Under Cathodic Protection
  60. Modelling steel corrosion damage in soil environment
  61. Structural Segregation and Ordering of Trimetallic Cu–Ag–Au Nanoclusters
  62. Study of Ceramic and Hybrid Coatings Produced by the Sol-Gel Method for Corrosion Protection
  63. molten salt corrosion
  64. Comparative Study of Corrosion in Physiological Serum of Ceramic Coatings Applied on 316L Stainless Steel Substrate
  65. Film properties and stability influence on impedance distribution during the dissolution process of low-carbon steel exposed to modified alkaline sour environment
  66. Stress Corrosion Cracking Behavior of X60 Pipe Steel in Soil Environment
  67. Cathodic Protection Effect on the Assessment of SCC Susceptibility of X52 Pipeline Steel
  68. Structural characteristics and thermal stability of bimetallic Cu-Ru nanocluster
  69. Assessment of SCC Susceptibility of Supermartensitic Stainless Steel Through Slow Strain Rate Tests
  70. SCC of X-52 and X-60 weldements in diluted NaHCO3 solutions with chloride and sulfate ions
  71. A comparative study of the SSC resistance of a novel welding process IEA with SAW and MIG
  72. Structural evolution of derived species on FeAl surface exposed to a N2+SO2 atmosphere: Experimental and theoretical study
  73. Corrosion Behavior of Alloys Fe-Al Immersed in a Eutectic of KCl-LiCl
  74. Resistance Corrosion Test of Ceramic Thin Film Coating on Low Carbon Steel
  75. Impedance Distribution of Hydrogen Permeation in the Corrosion Process of Low-Carbon Steel into a Modified Alkaline Sour Environment
  76. Effect of Mo, Ga and Fe on the corrosion resistance of nanocrystalline NiAl alloy in acidic media
  77. Corrosion performance of NiAl intermetallic with Mo, Ga and Fe in neutral and alkaline media
  78. Electrochemical noise generated during the stress corrosion cracking of sensitized alloy 690
  79. Microstructural evolution of Alloy 690 during sensitization at 700 °C
  80. A modified Nafion membrane with in situ polymerized polypyrrole for the direct methanol fuel cell
  81. Molecular dynamics simulation on edge dislocation in the bulk and nanoparticles of iron
  82. High temperature corrosion performance of FeAl intermetallic alloys in molten salts
  83. Corrosion of atomized Fe40Al based intermetallics in molten Na2SO4
  84. Corrosion protection of 1008 carbon steel by hybrid coatings
  85. Hot corrosion of atomized iron aluminides doped with boron and reinforced with alumina
  86. Oxidation Behavior of Atomized Fe40Al Intermetallics Doped with Boron and Reinforced with Alumina Fibers
  87. Predicting Susceptibility to Intergranular Stress Corrosion Cracking of Alloy 690
  88. Structural characterization of the montmorillonite clay nanometric particles