Contact

All Stories

  1. A nonlinear entropy-based model for thermo-mechanical degradation in metallic solids

    Article • January 2026, Elsevier

    Ph.D. Marcello Antonio Lepore

  2. Cyclic thermo-mechanical damage assessment of a radiation-cooled thruster wall using an entropy-informed formulation

    Article • January 2026, Elsevier

    Ph.D. Marcello Antonio Lepore

  3. Assessing Structural Integrity of Small Thrusters Using Computational Methods

    Article • Aerospace Science and Technology, July 2025, Elsevier

    Ph.D. Marcello Antonio Lepore

  4. A Computational Multiphysics Study of a Satellite Thruster

    Article • February 2025, MDPI AG

    Ph.D. Marcello Antonio Lepore

  5. An experimental validation of unified mechanics theory for predicting stainless steel low and high cycle fatigue damage initiation.

    Article • Forces in Mechanics, February 2023, Elsevier

    Ph.D. Marcello Antonio Lepore

  6. An experimental assessment of fracture toughness in novel crimp‐free‐based composite materials for aerospace applications

    Article • Fatigue & Fracture of Engineering Materials & Structures, June 2022, Wiley

    Ph.D. Marcello Antonio Lepore

  7. A unified approach to simulate the creep-fatigue crack growth in P91 steel at elevated temperature under SSY and SSC conditions

    Article • Engineering Failure Analysis, September 2021, Elsevier

    Ph.D. Marcello Antonio Lepore

  8. A non‐crimp fabric mechanical characterization for the production of aerospace components

    Article • Material Design & Processing Communications, March 2021, Wiley

    Ph.D. Marcello Antonio Lepore

  9. Non‐linear fatigue propagation of multiple cracks in an aluminium metal matrix composite (AlMMC) with silicon‐carbide fibre reinforcement

    Article • Material Design & Processing Communications, December 2019, Wiley

    Ph.D. Marcello Antonio Lepore

  10. Crack closure in friction stir weldment using non‐linear model for fatigue crack propagation

    Article • Fatigue & Fracture of Engineering Materials & Structures, September 2019, Wiley

    Ph.D. Marcello Antonio Lepore

  11. A comparison between numerical and approximate methods for rapid calculation of NSIFs

    Article • Theoretical and Applied Fracture Mechanics, June 2019, Elsevier

    Ph.D. Marcello Antonio Lepore

  12. Nonlinear fatigue crack propagation in a baffle module of Wendelstein 7‐X under cyclic bending loads

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2019, Wiley

    Ph.D. Marcello Antonio Lepore

  13. Non-linear models for assessing the fatigue crack behaviour under cyclic biaxial loading in a cruciform specimen

    Article • Theoretical and Applied Fracture Mechanics, April 2019, Elsevier

    Ph.D. Marcello Antonio Lepore

  14. Modelling of the micro-bond test for mechanical analysis of the fibre/matrix interphase in fibre reinforced plastics

    Article • January 2019, American Institute of Physics

    Ph.D. Marcello Antonio Lepore

  15. On the fatigue propagation of multiple cracks in friction stir weldments using linear and non-linear models under cyclic tensile loading

    Article • Engineering Fracture Mechanics, December 2018, Elsevier

    Ph.D. Marcello Antonio Lepore

  16. A computational strategy for damage-tolerant design of hollow shafts under mixed-mode loading condition

    Article • Fatigue & Fracture of Engineering Materials & Structures, October 2018, Wiley

    Ph.D. Marcello Antonio Lepore

  17. Overview of fatigue life assessment of baffles in Wendelstein 7-X

    Article • Fusion Engineering and Design, February 2018, Elsevier

    Venanzio Giannella, Ph.D. Marcello Antonio Lepore

  18. A FEM based methodology to simulate multiple crack propagation in friction stir welds

    Article • Engineering Fracture Mechanics, October 2017, Elsevier

    Ph.D. Marcello Antonio Lepore

  19. Dual-BEM and FEM for mixed-mode crack propagation simulations in a cracked hollow shaft.

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2017, Wiley

    Ph.D. Marcello Antonio Lepore, roberto citarella, Venanzio Giannella

  20. FEM-DBEM approach to analyse crack scenarios in a baffle cooling pipe undergoing heat flux from the plasma

    Article • AIMS Biophysics, January 2017, American Institute of Mathematical Sciences (AIMS)

    Venanzio Giannella, Ph.D. Marcello Antonio Lepore

  21. From test data to FE code: a straightforward strategy for modelling the structural bonding interface

    Article • Fracture and Structural Integrity, December 2016, Gruppo Italiano Frattura

    Ph.D. Marcello Antonio Lepore

  22. DBEM crack propagation in friction stir welded aluminum joints

    Article • Advances in Engineering Software, November 2016, Elsevier

    Ph.D. Marcello Antonio Lepore

  23. Hybrid technique to assess the fatigue performance of multiple cracked FSW joints

    Article • Engineering Fracture Mechanics, August 2016, Elsevier

    Ph.D. Marcello Antonio Lepore

  24. Coupled FEM-DBEM approach on multiple crack growth in cryogenic magnet system of nuclear fusion experiment ‘Wendelstein 7-X’

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2016, Wiley

    roberto citarella, Ph.D. Marcello Antonio Lepore

  25. Coupled FEM-DBEM Simulation of 3D Crack Growth under Fatigue Load Spectrum

    Article • Procedia Structural Integrity, January 2016, Elsevier

    Ph.D. Marcello Antonio Lepore

  26. Multiple crack propagation by DBEM in a riveted lap-joint

    Article • AIMS Biophysics, January 2016, American Institute of Mathematical Sciences (AIMS)

    Ph.D. Marcello Antonio Lepore

  27. DBEM crack propagation for nonlinear fracture problems

    Article • Fracture and Structural Integrity, September 2015, Gruppo Italiano Frattura

    Ph.D. Marcello Antonio Lepore

  28. Numerical–experimental crack growth analysis in AA2024-T3 FSWed butt joints

    Article • Advances in Engineering Software, February 2015, Elsevier

    Ph.D. Marcello Antonio Lepore

  29. FEM simulation of a crack propagation in a round bar under combined tension and torsion fatigue loading

    Article • Fracture and Structural Integrity, December 2014, Gruppo Italiano Frattura

    Ph.D. Marcello Antonio Lepore

  30. Fatigue surface crack growth in cylindrical specimen under combined loading

    Article • Engineering Fracture Mechanics, November 2014, Elsevier

    Ph.D. Marcello Antonio Lepore

  31. A FEM-DBEM investigation of the influence of process parameters on crack growth in aluminum friction stir welded butt joints

    Article • International Journal of Material Forming, July 2014, Springer Science + Business Media

    Ph.D. Marcello Antonio Lepore

  32. Thermo-mechanical crack propagation in aircraft engine vane by coupled FEM–DBEM approach

    Article • Advances in Engineering Software, January 2014, Elsevier

    Ph.D. Marcello Antonio Lepore

  33. Coupled FEM-DBEM method to assess crack growth in magnet system of Wendelstein 7-X

    Article • Fracture and Structural Integrity, September 2013, Gruppo Italiano Frattura

    Ph.D. Marcello Antonio Lepore

  34. Assessment of Crack Growth from a Cold Worked Hole by Coupled FEM-DBEM Approach

    Article • Key Engineering Materials, September 2013, Trans Tech Publications

    Ph.D. Marcello Antonio Lepore

  35. A FEM-DBEM Investigation of the Influence of Process Parameters on Crack Growth in Aluminum Friction Stir Welded Butt Joints

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Ph.D. Marcello Antonio Lepore

  36. Mode-I cohesive fracture identification

    Article • Engineering Fracture Mechanics, May 2013, Elsevier

    Dr Salvatore Sessa, Ph.D. Marcello Antonio Lepore

  37. Analysis of Occlusal Stresses Transmitted to the Inferior Alveolar Nerve by Multiple Threaded Implants

    Article • The Journal of Periodontology, January 2013, Wiley

    Ph.D. Marcello Antonio Lepore

  38. Stress Analysis of an Endosseus Dental Implant by BEM and FEM

    Article • The Open Mechanical Engineering Journal, November 2012, Bentham Science Publishers

    Ph.D. Marcello Antonio Lepore

  39. DBEM and FEM Analysis of an Extrusion Press Fatigue Failure

    Article • January 2010, Springer Science + Business Media

    Ph.D. Marcello Antonio Lepore