All Stories

  1. Sensitivity analysis of a system with two closely spaced modes using structural dynamic modification
  2. An engineering interpretation of the complex modal mass in structural dynamics
  3. Short-term analysis of extreme wave-induced forces on the connections of a floating breakwater
  4. Cross-Length of Mode Shapes in Structural Dynamics: Concept and Applications
  5. A review on fatigue monitoring of structures
  6. A comparative review of time- and frequency-domain methods for fatigue damage assessment
  7. Response of laminated glass elements subject to dynamic loadings using a monolithic model and a stress effective Young’s modulus
  8. Time-domain numerical modelling of the connector forces in a modular pontoon floating breakwater under regular and irregular oblique waves
  9. Experimental study and comparison of different fully transparent laminated glass beam designs
  10. Corrigendum to “Modal Mass and Length of Mode Shapes in Structural Dynamics”
  11. Long-term loading and recovery of a laminated glass slab with three different interlayers
  12. Flexural fatigue behaviour of a heated ultra-high-performance fibre-reinforced concrete
  13. Robust Cross-Orthogonality Check Using the Principle of Local Correspondence
  14. Modal Mass and Length of Mode Shapes in Structural Dynamics
  15. Buckling of laminated glass plates using the effective thickness concept
  16. Cálculo simplificado de vidrio laminado: determinación de desplazamientos en vigas y placas ante cargas estáticas utilizando modelos monolíticos
  17. Modal Participation Estimated from the Response Correlation Matrix
  18. Mechanical characterization of polyvinil butyral from static and modal tests on laminated glass beams
  19. Static and dynamic effective thickness in five-layered glass plates
  20. One-Step FE Model Updating Using Local Correspondence and Mode Shape Orthogonality
  21. Dynamic Behavior of Supported Structures from Free-Free Modal Tests Using Structural Dynamic Modification
  22. Fatigue damage detection and prediction of fatigue life on a cantilever beam
  23. Study of the time-temperature-dependent behaviour of PVB: Application to laminated glass elements
  24. A new scenario-based approach to damage detection using operational modal parameter estimates
  25. Buckling of multilayered laminated glass beams: Validation of the effective thickness concept
  26. Natural frequencies and damping ratios of multi-layered laminated glass beams using a dynamic effective thickness
  27. Calculation of displacements and stresses in laminated glass beams under dynamic loadings using an effective Young modulus
  28. Buckling of laminated-glass beams using the effective-thickness concept
  29. A general procedure for estimating dynamic displacements using strain measurements and operational modal analysis
  30. Application of Modal Superposition Technique in the Fatigue Analysis Using Local Approaches
  31. An effective thickness to estimate stresses in laminated glass beams under dynamic loadings
  32. Modal Analysis Based Stress Estimation for Structural Elements Subjected to Operational Dynamic Loadings
  33. Cálculo de desplazamientos en placas de vidrio laminado sometidas a carga estática mediante el concepto de módulo de elasticidad efectivo
  34. Cross Orthogonality Check for Structures with Closely Spaced Modes
  35. Mode shape sensitivity of two closely spaced eigenvalues
  36. Dynamic effective thickness in laminated-glass beams and plates
  37. A local correspondence principle for mode shapes in structural dynamics
  38. Dynamic Behavior of Laminated Glass Beams
  39. Modal Scaling in OMA Using the Mass matrix of a Finite Element Model
  40. ProFatigue: A Software Program for Probabilistic Assessment of Experimental Fatigue Data Sets
  41. Modal scaling in operational modal analysis using a finite element model
  42. The effective-thickness concept in laminated-glass elements under static loading
  43. Detection of Mass Change on a Glass Plate
  44. Frequency Response of Laminated Glass Elements: Analytical Modeling and Effective Thickness
  45. Influence of the Support Conditions in the Modal Parameters of a Cantilever Beam
  46. Strain Estimation in a Glass Beam Using Operational Modal Analysis
  47. On exact and approximated formulations for scaling-mode shapes in operational modal analysis by mass and stiffness change
  48. Estimating the S–N Field From Strain–Lifetime Curves
  49. Erratum to “Scaling-factor estimation using an optimized mass-change strategy” [Mech. Syst. Signal Process. 24(5) (2010) 1260–1273]
  50. Erratum to: SCALING-FACTOR ESTIMATION USING AN OPTIMIZED MASS-CHANGE STRATEGY
  51. Scaling Mode Shapes in Output-Only Systems by a Consecutive Mass Change Method
  52. Scaling-factor estimation using an optimized mass-change strategy
  53. Using statistical compatibility to derive advanced probabilistic fatigue models
  54. A general regression model for statistical analysis of strain–life fatigue data
  55. A critical comparison of two models for assessment of fatigue data
  56. Some fatigue damage measures for longitudinal elements based on the Wohler field
  57. Fatigue behaviour of hot rolled reinforcing bars of austenitic and duplex stainless steels
  58. A fatigue model with local sensitivity analysis
  59. Specimen length effect on parameter estimation in modelling fatigue strength by Weibull distribution