All Stories

  1. Limit and Shakedown Analysis of Thin Plates under Random Strength by Probabilistic Constrained Programming
  2. The Primary Stability of Arthroscopic Subscapularis Tendon Repair Depends on the Suture Technique: A Biomechanical Evaluation of 4 Different Repair Techniques
  3. Discontinuous fracture behaviors and constitutive model of sandstone specimens containing non-parallel prefabricated fissures under uniaxial compression
  4. Collagen Fibril Reinforcement in Connective Tissue Extracellular Matrices
  5. FEM shakedown analysis of structures under random strength with chance constrained programming
  6. Layer-Specific Damage Modeling of Porcine Large Intestine under Biaxial Tension
  7. An element‐based formulation for ES‐FEM and FS‐FEM models for their implementation in standard solid mechanics finite element codes for 2D and ...
  8. Virgin Passive Colon Biomechanics and a Literature Review of Active Contraction Constitutive Models
  9. Dental strain on maxillary incisors during tracheal intubation with double-lumen tubes and different laryngoscopy techniques - a blinded manikin study
  10. Generalized shear lag theory for an elastic stress transfer between matrix and fibres having a variable radius
  11. Corrigendum to “Wind and fairness in ski jumping: A computer modelling analysis” [J. Biomech. 75 (2018) 147–153]
  12. An Extension Strain Type Mohr–Coulomb Criterion
  13. A “Comma Sign”–Directed Subscapularis Repair in Anterosuperior Rotator Cuff Tears Yields Biomechanical Advantages in a Cadaveric Model
  14. Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure
  15. FEM SHAKEDOWN ANALYSIS OF KIRCHOFF-LOVE PLATES UNDER UNCERTAINTY OF STRENGTH
  16. A higher-throughput approach to investigate cardiac contractility in vitro under physiological mechanical conditions
  17. Direct plastic structural design under random strength and random load by chance constrained programming
  18. Biomechanical in vitro examination of a standardized low-volume tubular femoroplasty
  19. Osteosynthesis of Phalangeal Fractures: Biomechanical Comparison of Kirschner Wires, Plates, and Compression Screws
  20. Modeling and simulation of human induced pluripotent stem cell‐derived cardiac tissue
  21. Pressure Distribution to the Distal Biceps Tendon at the Radial Tuberosity: A Biomechanical Study
  22. Combining Physiological Relevance and Throughput for in vitro Cardiac Contractility Measurement
  23. An open-source tool for the validation of finite element models using three-dimensional full-field measurements
  24. A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse
  25. Comparison of forces acting on maxillary incisors during tracheal intubation with different laryngoscopy techniques: a blinded manikin study
  26. Irreparable Rotator Cuff Tears: A Biomechanical Comparison of Superior Capsuloligamentous Complex Reconstruction Techniques and an Interpositional Graft Technique
  27. Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement
  28. Direct plastic structural design under lognormally distributed strength by chance constrained programming
  29. A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair
  30. Optimization of the flight technique in ski jumping: the influence of wind
  31. Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue
  32. Postural and metabolic benefits of using a forearm support walker in older adults with impairments
  33. Optical strain measurement for the modeling of surgical meshes and their porosity
  34. Comparison of different textile implants to correct apical prolapse
  35. A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions
  36. Surgical treatment of vaginal vault prolapse
  37. Calculation of muscle forces and joint reaction loads in the shoulder area via an OpenSim based computer model
  38. Wind and fairness in ski jumping: A computer modelling analysis
  39. Corrigendum to “Flight style optimization in ski jumping on normal, large, and ski flying hills” [J. Biomech 47 (2014) 716–722]
  40. Pathogenese, funktionelle und anatomische Aspekte der weiblichen Belastungsinkontinenz
  41. Computational Analysis of Pelvic Floor Dysfunction
  42. Modelling of Soft Connective Tissues to Investigate Female Pelvic Floor Dysfunctions
  43. Growth Modelling Promoting Mechanical Stimulation of Smooth Muscle Cells of Porcine Tubular Organs in a Fibrin-PVDF Scaffold
  44. Towards Patient-Specific Computational Modeling of hiPS-Derived Cardiomyocyte Function and Drug Action
  45. Mechanics of Soft Tissue Reactions to Textile Mesh Implants
  46. Shakedown Analysis Under Stochastic Uncertainty by Chance Constrained Programming
  47. Reply to the letter to the editor: shortening osteotomy of the proximal radius
  48. Plate Osteosynthesis of Proximal Ulna Fractures—A Biomechanical Micromotion Analysis
  49. Modelling of compressible and orthotropic surgical mesh implants based on optical deformation measurement
  50. Porosity and tissue integration of elastic mesh implants evaluatedin vitroandin vivo
  51. Radial shortening osteotomy reduces radiocapitellar contact pressures while preserving valgus stability of the elbow
  52. FEM Shakedown of uncertain structures by chance constrained programming
  53. Suture button reconstruction of the central band of the interosseous membrane in Essex-Lopresti lesions: a comparative biomechanical investigation
  54. Free papers
  55. Mechano-Pharmacological Characterization of Cardiomyocytes Derived from Human Induced Pluripotent Stem Cells
  56. Sample-specific adaption of an improved electro-mechanical model of in vitro cardiac tissue
  57. SHAKEDOWN ANALYSIS OF PLATE BENDING UNDER STOCHASTIC UNCERTAINTY BY CHANCE CONSTRAINED PROGRAMMING
  58. A 3D ELECTROMECHANICAL FEM-BASED MODEL FOR CARDIAC TISSUE
  59. Physical response of hyperelastic models for composite materials and soft tissues
  60. Computational Investigation of Drug Action on Human-Induced Stem Cell-Derived Cardiomyocytes
  61. Uncertainty Multimode Failure and Shakedown Analysis of Shells
  62. Why does storage change some organs but not liver?
  63. Simulation of Cardiac Cell-Seeded Membranes Using the Edge-Based Smoothed FEM
  64. LIMIT AND SHAKEDOWN ANALYSIS UNDER UNCERTAINTY
  65. FEM-based shakedown analysis of hardening structures
  66. Flight style optimization in ski jumping on normal, large, and ski flying hills
  67. Shakedown Analysis of Reissner-Mindlin Plates Using the Edge-Based Smoothed Finite Element Method
  68. Stresses produced by different textile mesh implants in a tissue equivalent
  69. Virtual Reality Bone Sawing Model for Sagittal Split Osteotomy Training
  70. An Edge-Based Smoothed Finite Element Method for Primal-Dual Shakedown Analysis of Structures Under Uncertainties
  71. An Upper Bound Algorithm for Limit and Shakedown Analysis of Bounded Linearly Kinematic Hardening Structures
  72. Limit analysis of flaws in pressurized pipes and cylindrical vessels. Part II: Circumferential defects
  73. Introducing a Method of In Vitro Testing of Different Anchoring Systems Used for Female Incontinence and Prolapse Surgery
  74. Finite element modelling of stapled colorectal end-to-end anastomosis: Advantages of variable height stapler design
  75. Influence of a freeze–thaw cycle on the stress–stretch curves of tissues of porcine abdominal organs
  76. New measurements to compare soft tissue anchoring systems in pelvic floor surgery
  77. Determination of the frictional coefficient of the implant-antler interface: experimental approach
  78. 2011 Scientific Session of the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) San Antonio, Texas, USA, 30 March–2 April 2011 Poster Presentations
  79. Hypothermic Machine Perfusion of Kidney Grafts: Which Pressure is Preferred?
  80. A New Model for Blunt Liver Injuries in the Swine
  81. Experiment and material model for soft tissue materials
  82. Constitutive Models for Rubber VI
  83. Experiment and material model for soft tissue materials
  84. Probabilistic limit and shakedown analysis of thin plates and shells
  85. Upper bound limit and shakedown analysis of shells using the exact Ilyushin yield surface
  86. Percutaneous Vertebroplasty: A Review of Two Intraoperative Complications
  87. Shakedown analysis of structures made of materials with temperature-dependent yield stress
  88. Limit analysis of flaws in pressurized pipes and cylindrical vessels. Part I: Axial defects
  89. Analysis of pressure equipment by application of the primal‐dual theory of shakedown
  90. Limit loads of circumferentially flawed pipes and cylindrical vessels under internal pressure
  91. Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels
  92. Direct finite element route for design-by-analysis of pressure components
  93. An algorithm for shakedown analysis of structures with temperature dependent yield stress
  94. A Two Phase Mixture Model based on Bone Observation
  95. Plastic collapse analysis of longitudinally flawed pipes and vessels
  96. Shakedown and ratchetting under tension–torsion loadings: analysis and experiments
  97. Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis
  98. LISA — a European project for FEM-based limit and shakedown analysis
  99. Cyclic plastic deformation tests to verify FEM-based shakedown analyses
  100. Reliability Analysis of Elasto-Plastic Structures under Variable Loads
  101. FEM-computation of load carrying capacity of highly loaded passive components by direct methods
  102. Probabilistic assessment of the fracture mechanics behaviour of an HTR-module primary circuit pressure boundary
  103. Reliability of an HTR-module primary circuit pressure boundary Influences, sensitivity, and comparison with a PWR
  104. Failure probabilities of the primary circuit pressure boundary of an HTR-Module for process heat generation under accident conditions for different failure modes
  105. Zur Problematik tensorieller Verallgemeinerungen einachsiger nichtlinearer Materialgesetze
  106. Zur Problematik tensorieller Verallgemeinerungen einachsiger nichtlinearer Materialgesetze
  107. Fundamental Aspects of Numerical Methods for the Propagation of Multi-Dimensional Nonlinear Waves in Solids
  108. Computation of Impacts on Elastic Solids by Methods of Bicharacteristics
  109. ZAMM - Journal of Applied Mathematics and Mechanics
  110. High Stress Intensities in Focussing Zones of Waves
  111. Soft Materials in Technology and Biology – Characteristics, Properties, and Parameter Identification
  112. Reliability Analysis of Inelastic Shell Structures Under Variable Loads