All Stories

  1. Microstructure–properties relationships in martensitic stainless steel resistance spot welds

    Article • Science and Technology of Welding & Joining, July 2014, Taylor & Francis

    Dr Majid Pouranvari

  2. Dissimilar spot welding of dual phase steel/ferritic stainless steel: phase transformations

    Article • Science and Technology of Welding & Joining, June 2014, Taylor & Francis

    Dr Majid Pouranvari, Hassanen L. Jaber

  3. Resistance spot welding of AISI 430 ferritic stainless steel: Phase transformations and mechanical properties

    Article • Materials & Design (1980-2015), April 2014, Elsevier

    Dr Majid Pouranvari

  4. Laser spot welding of AISI 304L: metallurgical and mechanical properties

    Article • Ironmaking & Steelmaking, December 2013, Taylor & Francis

    Dr Majid Pouranvari

  5. Diffusion brazing of cast INCONEL 718 superalloy utilising standard heat treatment cycle

    Article • Materials Science and Technology, December 2013, Taylor & Francis

    Dr Majid Pouranvari

  6. Aging response of transient liquid phase bonded wrought IN718 superalloy: influence of post-bond heat treatment

    Article • Science and Technology of Welding & Joining, December 2013, Taylor & Francis

    Dr Majid Pouranvari

  7. Diffusion induced isothermal solidification during transient liquid phase bonding of cast IN718 superalloy

    Article • Canadian Metallurgical Quarterly, December 2013, Taylor & Francis

    Dr Majid Pouranvari

  8. Transient liquid phase bonding of wrought IN718 nickel based superalloy using standard heat treatment cycles: Microstructure and mechanical properties

    Article • Materials & Design (1980-2015), September 2013, Elsevier

    Dr Majid Pouranvari

  9. Microstructural characteristics of a cast IN718 superalloy bonded by isothermal solidification

    Article • Metals and Materials International, September 2013, Springer Science + Business Media

    Dr Majid Pouranvari

  10. Phase transformations during diffusion brazing of IN718/Ni–Cr–B/IN718

    Article • Materials Science and Technology, August 2013, Taylor & Francis

    Dr Majid Pouranvari

  11. Critical review of automotive steels spot welding: process, structure and properties

    Article • Science and Technology of Welding & Joining, July 2013, Taylor & Francis

    Dr Majid Pouranvari

  12. Solidification and solid state phenomena during TLP bonding of IN718 superalloy using Ni–Si–B ternary filler alloy

    Article • Journal of Alloys and Compounds, June 2013, Elsevier

    Dr Majid Pouranvari

  13. Failure mode of HSLA/DQSK dissimilar steel resistance spot welds

    Article • Ironmaking & Steelmaking, May 2013, Taylor & Francis

    Dr Majid Pouranvari

  14. TLP bonding of cast IN718 nickel based superalloy: Process–microstructure–strength characteristics

    Article • Materials Science and Engineering A, April 2013, Elsevier

    Dr Majid Pouranvari

  15. On the Failure Mode of Resistance Spot Welded Hsla 420 Steel / Tryb Uszkodzenia Zgrzewanych Spoin Stali Hsla 420

    Article • Archives of Metallurgy and Materials, March 2013, Polish Academy of Sciences Chancellery

    Dr Majid Pouranvari

  16. On failure mode of resistance spot welded DP980 advanced high strength steel

    Article • Canadian Metallurgical Quarterly, October 2012, Taylor & Francis

    Dr Majid Pouranvari

  17. Susceptibility to interfacial failure mode in similar and dissimilar resistance spot welds of DP600 dual phase steel and low carbon steel during cross-tension and tensile-shear loading conditions

    Article • Materials Science and Engineering A, June 2012, Elsevier

    Dr Majid Pouranvari

  18. Similar and dissimilar resistance spot welding of martensitic advanced high strength steel and low carbon steel: metallurgical characteristics and failure mode transition

    Article • Science and Technology of Welding & Joining, May 2012, Taylor & Francis

    Dr Majid Pouranvari

  19. Failure of resistance spot welds: tensile shear versus coach peel loading conditions

    Article • Ironmaking & Steelmaking, February 2012, Taylor & Francis

    Dr Majid Pouranvari

  20. Failure mode transition in similar and dissimilar resistance spot welds of HSLA and low carbon steels

    Article • Canadian Metallurgical Quarterly, January 2012, Taylor & Francis

    Dr Majid Pouranvari

  21. Weld nugget formation and mechanical properties of three-sheet resistance spot welded low carbon steel

    Article • Canadian Metallurgical Quarterly, January 2012, Taylor & Francis

    Dr Majid Pouranvari

  22. Failure Behavior of Three-Steel Sheets Resistance Spot Welds: Effect of Joint Design

    Article • Journal of Materials Engineering and Performance, December 2011, Springer Science + Business Media

    Dr Majid Pouranvari

  23. Failure mode transition in AHSS resistance spot welds. Part II: Experimental investigation and model validation

    Article • Materials Science and Engineering A, November 2011, Elsevier

    Dr Majid Pouranvari

  24. Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors

    Article • Materials Science and Engineering A, November 2011, Elsevier

    Dr Majid Pouranvari

  25. Influence of welding parameters on peak load and energy absorption of dissimilar resistance spot welds of DP600 and AISI 1008 steels

    Article • Canadian Metallurgical Quarterly, October 2011, Taylor & Francis

    Dr Majid Pouranvari

  26. Dissimilar resistance spot welding of DP600 dual phase and AISI 1008 low carbon steels: correlation between weld microstructure and mechanical properties

    Article • Ironmaking & Steelmaking, August 2011, Taylor & Francis

    ali mousavizadeh, Dr Majid Pouranvari

  27. Dissimilar Spot Welds of AISI 304/AISI 1008: Metallurgical and Mechanical Characterization

    Article • steel research international, July 2011, Wiley

    Dr Majid Pouranvari

  28. Investigation on Joint Strength of Dissimilar Resistance Spot Welds of Aluminum Alloy and Low Carbon Steel

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Dr Majid Pouranvari

  29. Influence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon steel and DP600 advanced high strength steel

    Article • Materials & Design (1980-2015), March 2011, Elsevier

    Dr Majid Pouranvari

  30. Critical sheet thickness for weld nugget growth during resistance spot welding of three‐steel sheets

    Article • Science and Technology of Welding & Joining, February 2011, Taylor & Francis

    Dr Majid Pouranvari

  31. Mechanical performance of three thickness resistance spot welded low carbon steel

    Article • Materials Science and Technology, January 2011, Taylor & Francis

    Dr Majid Pouranvari

  32. Metallurgical and Mechanical Characterization of Laser Spot Welded Low Carbon Steel Sheets

    Article • steel research international, December 2010, Wiley

    Dr Majid Pouranvari

  33. Failure mode transition and mechanical properties of similar and dissimilar resistance spot welds of DP600 and low carbon steels

    Article • Science and Technology of Welding & Joining, October 2010, Taylor & Francis

    ali mousavizadeh, Dr Majid Pouranvari

  34. Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test

    Article • Materials Science and Technology, October 2010, Taylor & Francis

    Dr Majid Pouranvari

  35. Factors affecting mechanical properties of resistance spot welds

    Article • Materials Science and Technology, September 2010, Taylor & Francis

    Dr Majid Pouranvari

  36. On the failure of low carbon steel resistance spot welds in quasi-static tensile–shear loading

    Article • Materials & Design (1980-2015), September 2010, Elsevier

    Dr Majid Pouranvari

  37. On the weldability of grey cast iron using nickel based filler metal

    Article • Materials & Design (1980-2015), August 2010, Elsevier

    Dr Majid Pouranvari

  38. Microstructure and failure behaviour of resistance spot welded DP980 dual phase steel

    Article • Materials Science and Technology, June 2010, Taylor & Francis

    Dr Majid Pouranvari

  39. Key factors influencing mechanical performance of dual phase steel resistance spot welds

    Article • Science and Technology of Welding & Joining, February 2010, Taylor & Francis

    Dr Majid Pouranvari

  40. Similar and dissimilar RSW of low carbon and austenitic stainless steels: effect of weld microstructure and hardness profile on failure mode

    Article • Materials Science and Technology, December 2009, Taylor & Francis

    Dr Majid Pouranvari

  41. The effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferrite–martensite dual phase steel sheets

    Article • Materials Science and Engineering A, August 2009, Elsevier

    Dr Majid Pouranvari

  42. Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel

    Article • Journal of Materials Processing Technology, May 2009, Elsevier

    Dr Majid Pouranvari

  43. Effect of casting process on microstructure and tribological behavior of LM13 alloy

    Article • Journal of Alloys and Compounds, May 2009, Elsevier

    Dr Majid Pouranvari, Mr Rouholah Ashiri

  44. Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy

    Article • Journal of Alloys and Compounds, February 2009, Elsevier

    Dr Majid Pouranvari

  45. On the relation of microstructure and impact toughness characteristics of DSAW steel of grade API X70

    Article • Fatigue & Fracture of Engineering Materials & Structures, January 2009, Wiley

    ali mousavizadeh, Dr Majid Pouranvari

  46. Relationship between failure behaviour and weld fusion zone attributes of austenitic stainless steel resistance spot welds

    Article • Materials Science and Technology, December 2008, Taylor & Francis

    Dr Majid Pouranvari

  47. Microstructure development during transient liquid phase bonding of GTD-111 nickel-based superalloy

    Article • Journal of Alloys and Compounds, August 2008, Elsevier

    Dr Majid Pouranvari

  48. Microstructure–properties relationship of TLP-bonded GTD-111 nickel-base superalloy

    Article • Materials Science and Engineering A, August 2008, Elsevier

    Dr Majid Pouranvari

  49. Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels

    Article • Materials Science and Engineering A, May 2008, Elsevier

    Dr Majid Pouranvari

  50. Effect of expulsion on peak load and energy absorption of low carbon steel resistance spot welds

    Article • Science and Technology of Welding & Joining, January 2008, Taylor & Francis

    Dr Majid Pouranvari

  51. Failure analysis of automatic coupler SA-3 in railway carriages

    Article • Engineering Failure Analysis, July 2007, Elsevier

    Dr Majid Pouranvari

  52. Effect of weld nugget size on overload failure mode of resistance spot welds

    Article • Science and Technology of Welding & Joining, April 2007, Taylor & Francis

    Dr Majid Pouranvari