All Stories

  1. Fusion neutron source and array of particle detectors for nondestructive interrogation of special nuclear materials
  2. Nondestructive and active interrogation system for special nuclear material: proof of principle and initial results
  3. Influence of the Hydrogen Isotope Affinity of the Cathode Coating Material on the Neutron Production Rate in the Glow Discharge–Type Fusion Neutron Source
  4. Influence of electrodes' geometrical properties on the neutron production rate of a discharge fusion neutron source
  5. Measurements of Thermal and Epithermal Neutron Spatial Distribution Using Activation Foils Inside a Fusion Blanket Mock-Up
  6. Effects of Metal Hydride Coatings at the Electrodes on Neutron Production Rate in a Discharge-Type Fusion Neutron Source
  7. Hydrogen permeation from F82H wall of ceramic breeder pebble bed: The effect of surface corrosion
  8. Employing of ZrCo as a fuel source in a discharge-type fusion neutron source operated in self-sufficient mode
  9. New thermally stimulated emission spectrometer for the detection of ultra-shallow low-density traps
  10. Characterization of an ultra-compact neutron source based on an IEC fusion device and its prospective applications in radiography
  11. Evaluation of tritium production rate in a blanket mock-up using a compact fusion neutron source
  12. Evaluation of 3D printed buckyball-shaped cathodes of titanium and stainless-steel for IEC fusion system
  13. Determination of Thermoluminescence Kinetic Parameters of La2O3 Doped with Dy3+ and Eu3+
  14. Monte Carlo Simulation of γ − γ Correlation Functions
  15. Potential Profile Measurements Inside a Gridded Cathode at High Potential in a Spherical Inertial Electrostatic Confinement Device
  16. Improvement of the Neutron Production Rate of IEC Fusion Device by the Fusion Reaction on the Inner Surface of the IEC Chamber
  17. Study on anomalous photoemission of LaB6 at high temperatures
  18. Fusion systems for energy generations are the future replacement of the fission systems
  19. Influence of the Cathode Material Properties in Reducing the Back-Bombardment Effect in Thermionic RF Gun
  20. Charge production studies from Cs2Te photocathodes in a normal conducting RF gun
  21. Transverse beam matching under the influence of space charge
  22. CeB6: Emission Performance and Uniformity Compared With LaB6for Thermionic RF Guns
  23. Emission properties and back-bombardment for CeB6 compared to LaB6
  24. Analysis of nuclear resonance fluorescence excitation measured with LaBr3(Ce) detectors near 2MeV
  25. Improvement of trapped field in DyBaCuO bulk by proton irradiation
  26. Low-Temperature Operation of a Bulk HTSC Staggered Array Undulator
  27. Current Status of the Non-destructive Assay for 235U and 239Pu Toward More Secure Nuclear Power
  28. Simulation of Electron Trajectory in Bulk HTSC Staggered Array Undulator
  29. Conceptual design of a novel insertion device using bulk superconducting magnet
  30. Assessment of LaBr3(Ce) scintillators system for measuring nuclear resonance fluorescence excitations near 2 MeV
  31. Back bombardment for dispenser and lanthanum hexaboride cathodes
  32. Community acceptance of nuclear power generation in Japan and relevant influencing factors
  33. Short bunch effect on tabletop THz FEL amplification
  34. Analysis of Transient Response of RF Gun Cavity Due to Back-Bombardment Effect in KU-FEL
  35. Beam Stabilization by Using BPM in KU-FEL
  36. Material Analysis Laboratory in KU-FEL, Kyoto University
  37. ? Research Activities on MIR-FEL and table top THz Generation inKyoto University
  38. Comparison Between the Hexaboride Materials as Thermionic Cathode in the RF Guns for a Compact MIR-FEL Driver
  39. FEL Beamline for Wide Tunable Range and Beam Sharing System at Kyoto University
  40. New Material Processing and Evaluation for TiO2 by Microwave and Mid-Infrared Light Techniques
  41. Proposal of a Bulk HTSC Staggered Array Undulator
  42. Concept of a novel tabletop THz FEL amplifier
  43. Numerical evaluation of THz light by using tabletop FEL amplifier
  44. Determination of the trapping parameters of thermoluminescent glow peaks of K2YF5:Ce by three points method
  45. Applications of the three points analysis method for obtaining the trap parameters and the separation of thermoluminescence glow curve into its components