All Stories

  1. Emissivity of post-corrosion stainless steel 316 exposed to FLiBe molten salt in a non-isothermal flow loop

    Article • Journal of Nuclear Materials, October 2025, Elsevier

    Professor M ZAHABUL ISLAM

  2. Heat Treatment of Additively Manufactured Nickel-Based Superalloy Haynes 282

    Article • Metallurgical and Materials Transactions A, June 2025, Springer Science + Business Media

    Professor M ZAHABUL ISLAM

  3. Topological Design and Modeling of 3D-Printed Grippers for Combined Precision and Coarse Robotics Assembly

    Article • Actuators, April 2025, MDPI AG

    Professor M ZAHABUL ISLAM

  4. Reinforcing Role of Graphene in High Entropy Alloy Matrix Composites

    Article • April 2025, Springer Science + Business Media

    Professor M ZAHABUL ISLAM

  5. Thermo-Mechanical Characterization of 2d Hexagonal Boron Phosphide (H-Bp)

    Article • January 2025, Elsevier

    Professor M ZAHABUL ISLAM

  6. Role of mechanical stress localizations on the radiation hardness of AlGaN/GaN high electron mobility transistors

    Article • Journal of Physics D Applied Physics, November 2024, Institute of Physics Publishing

    Professor M ZAHABUL ISLAM

  7. Tensile and compressive response of tungsten g-TPMS lattice structures

    Article • Materials Today Communications, August 2024, Elsevier

    Professor M ZAHABUL ISLAM

  8. Swish-ResNet Method for Faulty Weld Detection

    Article • June 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Professor M ZAHABUL ISLAM

  9. Process optimization and scaling of molybdenum and tungsten in additive manufacturing techniques

    Article • International Journal of Refractory Metals and Hard Materials, June 2024, Elsevier

    Professor M ZAHABUL ISLAM

  10. Mechanical Response of Tungsten g-TPMS Lattice Structures

    Article • January 2024, Elsevier

    Professor M ZAHABUL ISLAM

  11. Process Optimization and Scaling of Molybdenum and Tungsten in Additive Manufacturing Techniques

    Article • January 2024, Elsevier

    Professor M ZAHABUL ISLAM

  12. Reactive Synthesis in Additive Manufacturing of an Ultrahigh Temperature MoSiB Alloy

    Article • JOM, October 2023, Springer Science + Business Media

    Professor M ZAHABUL ISLAM

  13. The performance of additively manufactured Haynes 282 in supercritical CO2

    Article • Materials Science and Engineering A, April 2022, Elsevier

    Professor M ZAHABUL ISLAM

  14. Characterization of multi-material 316L-Hastelloy X fabricated via laser powder-bed fusion

    Article • Materials Science and Engineering A, March 2022, Elsevier

    Professor M ZAHABUL ISLAM

  15. A dimensionless number for high-throughput design of multi-principal element alloys in directed energy deposition

    Article • Applied Physics Letters, December 2021, American Institute of Physics

    Professor M ZAHABUL ISLAM

  16. A High-Throughput Method to Define Additive Manufacturing Process Parameters: Application to Haynes 282

    Article • Metallurgical and Materials Transactions A, November 2021, Springer Science + Business Media

    Professor M ZAHABUL ISLAM

  17. (Invited) Total Dose Effects and Single Event Upsets During Radiation Damage of GaN and SiC

    Article • ECS Transactions, October 2021, The Electrochemical Society

    Professor M ZAHABUL ISLAM

  18. Microstructural processing of steel at ambient surface temperature

    Article • Materials Science and Engineering A, May 2021, Elsevier

    Professor M ZAHABUL ISLAM

  19. Review—Radiation Damage in Wide and Ultra-Wide Bandgap Semiconductors

    Article • ECS Journal of Solid State Science and Technology, May 2021, The Electrochemical Society

    Professor M ZAHABUL ISLAM

  20. Defect annihilation in heavy ion irradiated polycrystalline gold

    Article • Materials Letters, January 2021, Elsevier

    Professor M ZAHABUL ISLAM

  21. Defects and grain boundary effects in MoS2: A molecular dynamics study

    Article • Journal of Physics and Chemistry of Solids, January 2021, Elsevier

    Professor M ZAHABUL ISLAM

  22. Electro-strengthening of the additively manufactured Ti–6Al–4V alloy

    Article • Materials Science and Engineering A, November 2020, Elsevier

    Professor M ZAHABUL ISLAM

  23. Electro-thermal co-design of β-(AlxGa1-x)2O3/Ga2O3 modulation doped field effect transistors

    Article • Applied Physics Letters, October 2020, American Institute of Physics

    Professor M ZAHABUL ISLAM

  24. In Situ Transmission Electron Microscopy Observations of Forward Bias Degradation of Vertical Geometry β-Ga2O3 Rectifiers

    Article • ECS Journal of Solid State Science and Technology, June 2020, The Electrochemical Society

    Professor M ZAHABUL ISLAM

  25. Recrystallization mechanisms of Zircaloy-4 alloy annealed by electric current

    Article • Journal of Alloys and Compounds, April 2020, Elsevier

    Professor M ZAHABUL ISLAM

  26. Enhancement of WSe2 FET Performance Using Low-Temperature Annealing

    Article • Journal of Electronic Materials, March 2020, Springer Science + Business Media

    Professor M ZAHABUL ISLAM

  27. Asymmetrical Contact Geometry to Reduce Forward-Bias Degradation in β-Ga2O3 Rectifiers

    Article • ECS Journal of Solid State Science and Technology, March 2020, The Electrochemical Society

    Professor M ZAHABUL ISLAM

  28. High-voltage high-current vertical geometry Ga2O3 rectifiers

    Article • March 2020, SPIE

    Professor M ZAHABUL ISLAM

  29. In Situ Observation of $β-Ga₂O₃ Schottky Diode Failure Under Forward Biasing Condition

    Article • IEEE Transactions on Electron Devices, January 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Professor M ZAHABUL ISLAM

  30. Heavy ion irradiation effects on GaN/AlGaN high electron mobility transistor failure at off-state

    Article • Microelectronics Reliability, November 2019, Elsevier

    Professor M ZAHABUL ISLAM

  31. Quality enhancement of low temperature metal organic chemical vapor deposited MoS2: an experimental and computational investigation

    Article • Nanotechnology, July 2019, Institute of Physics Publishing

    Professor M ZAHABUL ISLAM

  32. Synergy of elastic strain energy and electron wind force on thin film grain growth at room temperature

    Article • Materials Characterization, June 2019, Elsevier

    Professor M ZAHABUL ISLAM

  33. Low temperature annealing of metals with electrical wind force effects

    Article • Journal of Material Science and Technology, April 2019, Elsevier

    Professor M ZAHABUL ISLAM

  34. Effect of Annealing on the Band Alignment of ALD SiO2 on (AlxGa1-x)2O3 for x = 0.2 - 0.65

    Article • ECS Journal of Solid State Science and Technology, January 2019, The Electrochemical Society

    Professor M ZAHABUL ISLAM

  35. Departing from the mutual exclusiveness of strength and ductility in nanocrystalline metals with vacancy induced plasticity

    Article • Scripta Materialia, December 2018, Elsevier

    Professor M ZAHABUL ISLAM

  36. Real-time visualization of GaN/AlGaN high electron mobility transistor failure at off-state

    Article • Applied Physics Letters, October 2018, American Institute of Physics

    Professor M ZAHABUL ISLAM

  37. In-situ Transmission Electron Microscopy of Transistor Operation and Failure

    Article • Nanotechnology, May 2018, Institute of Physics Publishing

    Professor M ZAHABUL ISLAM

  38. Current density effects on the microstructure of zirconium thin films

    Article • Scripta Materialia, February 2018, Elsevier

    Professor M ZAHABUL ISLAM

  39. Strain induced phase transformation in zirconium thin films

    Article • Computational Materials Science, February 2018, Elsevier

    Professor M ZAHABUL ISLAM

  40. Role of sulphur atoms on stress relaxation and crack propagation in monolayer MoS2

    Article • Nanotechnology, August 2017, Institute of Physics Publishing

    Professor M ZAHABUL ISLAM

  41. Effect of temperature and geometric parameters on elastic properties of tungsten nanowire: A molecular dynamics study

    Article • January 2016, American Institute of Physics

    Professor M ZAHABUL ISLAM

  42. Mechanical Properties of Graphene Nano Ribbon and Their Nanocomposites

    Article • Journal of Computational and Theoretical Nanoscience, March 2015, American Scientific Publishers

    Professor M ZAHABUL ISLAM

  43. Corrigendum: Characterization of the thermal expansion properties of graphene using molecular dynamics simulations (2013 J. Phys. D: Appl. Phys. 46 435302)

    Article • Journal of Physics D Applied Physics, September 2014, Institute of Physics Publishing

    Professor M ZAHABUL ISLAM

  44. Mechanical properties of defective carbon nanotube/polyethylene nanocomposites: A molecular dynamics simulation study

    Article • Polymer Composites, August 2014, Wiley

    Professor M ZAHABUL ISLAM

  45. Effect of Vacancy and Stone-Wales Defects on the Shear Strength of Carbon Nanotube-Polymer Interfaces

    Article • Advanced Materials Research, June 2014, Trans Tech Publications

    Professor M ZAHABUL ISLAM

  46. Molecular dynamics simulations of defective CNT-polyethylene composite systems

    Article • Computational Materials Science, November 2013, Elsevier

    Professor M ZAHABUL ISLAM

  47. Characterization of the thermal expansion properties of graphene using molecular dynamics simulations

    Article • Journal of Physics D Applied Physics, October 2013, Institute of Physics Publishing

    Professor M ZAHABUL ISLAM

  48. Molecular Dynamics and Atomistic Finite Element Simulation Studies of the Effect of Stone-Wales Defects on the Mechanical Properties of Carbon Nanotubes

    Article • Nanoscience and Nanotechnology Letters, September 2013, American Scientific Publishers

    Professor M ZAHABUL ISLAM