All Stories

  1. Simulation of Billet Shapes Using Multiple Atomizers
  2. Radial Heterogeneity of Microstructure and Mechanical Properties in a Resin Sand-Cast Mg-Gd-Y-Zn-Zr Alloy
  3. Universal topological magnetoresistance probed in Fe3GeTe2 at skyrmion state
  4. Effects of Different Aging Treatment on the Microstructure and Mechanical Properties of Spray Formed Al-Zn-Mg-Cu-Zr Alloys
  5. Effect of Y Content on the Microstructure and Mechanical Properties of Mg–xY–2.2Nd–1.0Gd–0.5Zr Alloys
  6. Melting Behavior and Phase Transition Characteristics of Superalloy FGH96 Powder and Bulk Material During Vacuum Induction Melting
  7. A novel Mg-Zr-Ti grain refiner for rare earth-containing magnesium alloys and its refinement mechanism
  8. Corrigendum to “A novel Mg-Zr-Ti grain refiner for rare earth-containing magnesium alloys and its refinement mechanism” [J. Alloys Compd. 1057 (2026) 186929]
  9. Effect of grain size on fatigue behaviors of Mg-2.6Nd-0.35Zn-xZr alloys
  10. Formation and control of fluorescent linear defects in Mg-RE alloy casings
  11. Realizing casting formation of 100 mm complex structure Vit1 metallic glass component over hundreds of grams
  12. Effect of Pressure on Microstructure and Mechanical Properties of Mg–Gd–Ag Alloy during Solution Heat Treatment
  13. Investigation on Mechanical Properties and Linear Separation Validation of a Cast Mg–Gd–Ag Rare-Earth Alloy under High-Speed Impact
  14. Grain Refinement Behaviors of Mg-Nd-Zn Alloy by Zirconium
  15. Additive manufacturing of cryogenic chemically complex alloys with sponge bone-like reticular nanoscale superstructure
  16. Thermodynamic and kinetic mechanism of interfacial reactions between several industrial oxide refractory ceramics and Vit 105 amorphous alloy melt
  17. A quadruple-functional photo-electrocatalyst for monitorable PCB-12 dechlorination during alkaline water splitting
  18. Controlling mechanical performance and structural homogeneity of large-sized Zr-based bulk metallic glasses via mold temperature regulation
  19. Effect of Y on oxide film formation and ignition behavior of magnesium-rare earth alloy
  20. Unexpected Ignition Mode of EV31 Magnesium Alloys Starting from Melt
  21. The key to high-quality metallic glass casting: Interfacial reaction associated with vacuum induction melting process procedures
  22. Tensile strength reliability analysis of GdDyCoAl-based high entropy amorphous microwires
  23. Catalytic Mechanism of Nanocrystalline and Amorphous Matrix in Fe‐Based Microwires for Advanced Oxidation
  24. Manipulation of magnetic domains in LaMn2Ge2
  25. Melt fluidity and microstructure of bulk metallic glass under different cooling conditions
  26. Selectively Suppressed Double Channel Electronic Transport in the Sm Doping Semiconductor Layer Oxide Bi2O2Se
  27. Biomimetic (Co, Ni, W)O N /WO3 photoelectrocatalyst for robust seawater oxidation
  28. Magnetic properties and magnetocaloric effects of rare-earth based high-entropy amorphous microwires
  29. Microstructure and magnetocaloric behavior of GdDyCoAl-based high-entropy metallic glass microwires
  30. Optimization of pressurization process in low-pressure casting of a 5.4-ton gigantic C95800 copper alloy casting
  31. Ultra‐stable metallic glass generated by modulation of melt state
  32. Optimization of the Synchronous Pressurization Process for the Elimination of Double-Layer Oxide Film Defects
  33. The effect of metal/non-metal ratio on the microstructure and magnetic properties of (MnFe) (P0.5Si0.5) microwires
  34. Effect of Fe on the microstructure and magnetic transition of Mn-Fe-P-Si Microwires
  35. A novel nonlinear pressurization method for counter-gravity casting of cross-sectional mutation structures
  36. Giant magnetocaloric effect and hysteresis loss in Mn Fe2-P0.5Si0.5 (0.7 ≤ x ≤ 1.2) microwires at ambient temperatures
  37. Investigating the influence of pressure on the ignition and oxidation behavior of EV33 alloy
  38. Revealing the Relationship between Critical Inlet Velocity and a Double-Layer Oxide Film Combined with Low-Pressure Casting Technology
  39. Magnetocaloric Properties of Melt-Extracted Medium Entropy Gd33Co33Al34 Microfibers
  40. Topological magnetoresistance of magnetic skyrmionic bubbles
  41. Novel mechanism of Fe4+/Ni3+ synergistic effect via exchange energy gain for boosting water oxidation
  42. Optimizing energy efficiency in induction skull melting process: investigating the crucial impact of melting system structure
  43. Effect of mold temperature on the solidification process and microstructure of Zr-based metallic glasses during casting
  44. Fully coupled numerical analysis for induction skull melting technology applied for metallic glass component alloy
  45. Microstructure and magnetocaloric properties of melt‐extracted SmGdDyCoAl high‐entropy amorphous microwires
  46. Research on the formation mechanism and fracture behavior of bifilm defects
  47. Effect of Surface Damage on pH Sensitivity of LaAlO3/SrTiO3 Heterostructure Device
  48. In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy
  49. Break the superheat temperature limitation of induction skull melting technology
  50. Significant Structure Modulation in Polar Antiferromagnet FeCoMo3O8
  51. Effect of casting temperature on the solidification process and (micro)structure of Zr-based metallic glasses
  52. Liquid-liquid transition and inherited signatures in Zr-Cu-Ni-Al metallic glasses
  53. Enhanced corrosion resistance of a ZrCuNiAl bulk metallic glass in simulated groundwater by minor crystallization
  54. Large Linear Giant Magneto-Impedance Response of Microwire Annealed under Liquid Medium for Potential Sensor Applications
  55. Heat-Induced Magnetic Transition for Water Electrolysis on NiFeN@NiFeOOH Core–Shell Assembly
  56. Cavity Etching Behavior on the M‐Plane of Sapphire Crystal
  57. The Magnetocaloric Behaviors of Gd-based Microwire Arrays with Different Curie Temperatures
  58. Tensile Properties of Melt-Extracted and Annealed Ni/Fe-Based Amorphous Metallic Fibers
  59. Heat‐Triggered Ferri‐to‐Paramagnetic Transition Accelerates Redox Couple‐Mediated Electrocatalytic Water Oxidation
  60. Intermediate-Temperature Tensile Behavior of a Hot-Rolled Mg-Li-Al-Cd-Zn Alloy
  61. Stable pH sensitivity of LaAlO3/SrTiO3 interfacial electronic gas
  62. Floc-like CNTs jointed with BixFe1−xVO4 nanoparticles for high efficient and stable photoelectrochemical seawater splitting
  63. Shrinked bifilms in Mg-Gd-Y-Zr alloy
  64. Creep behaviors of a Mg–Li based alloy at elevated temperatures
  65. Hot Deformation Behavior of a Co-Spray-Formed Al-Si/7075 Bimetallic Gradient Alloy
  66. Tunable Linear Dependence of Giant Magnetoimpedance Response of Microwires Annealed under Fluid Oil for Sensor Applications
  67. Preliminary study on deformation behaviors of spray droplet impacting on nonrigid deposited layer
  68. Thermal Expansion Behavior of Co-Spray Formed Al-20Si/7075 Bimetallic Gradient Alloy
  69. Biocompatibility of a micro-arc oxidized ZrCuAlAg bulk metallic glass
  70. Evolution of topological defects at two sequential phase transitions of Nd2SrFe
  71. Dislocation Etching Morphology on the A Plane of Sapphire Crystal
  72. Surface microstructural design to improve mechanical and giant magneto-impedance properties of melt-extracted CoFe-based amorphous wires
  73. Etching Behaviors of Sapphire's C- Plane Cavity
  74. Heat-induced magnetic transition accelerates redox couple mediated electrocatalytic water oxidation in alkaline media
  75. In situ study on the bending strain field of a Zr-based bulk metallic glass with notch
  76. Structure of oxide bifilms in nickel-aluminium bronze alloys
  77. Electrically tunable inverse spin Hall effect in SrIrO3/Pb(Mg1/3Nb2/3)0.7 Ti0.3O3 heterostructures through interface strain coupling
  78. Oxide bifilm defects in aluminum alloy castings
  79. Morphology and fracture of oxide bifilm defects in nickel-aluminium bronze
  80. Three-dimensional reconstruction of bifilm defects
  81. Cavity etching evolution on the A-plane of sapphire crystal in molten KOH etchant
  82. New DyHoCo medium entropy amorphous microwires of large magnetic entropy change
  83. Imitation of spin density wave order in Cu3Nb2
  84. Magnetic phase transitions and spin density distribution in the molecular multiferroic system GaV4
  85. Easy-cone magnetic structure in (Cr0.9B0.1)Te
  86. Origin of Ising magnetism in Ca3Co2O6 unveiled by orbital imaging
  87. Polar and phase domain walls with conducting interfacial states in a Weyl semimetal MoTe2
  88. Emergent Topological Hall Effect in La0.7Sr0.3MnO3/SrIrO3 Heterostructures
  89. Efficient Photoconversion and Charge Separation of a (Mn2+-Fe2O3)/Reduced Graphene Oxide/(Fe3+-WO3) Photoelectrochemical Anode via Band-Structure Modulation
  90. Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
  91. Preparation, Structure Evolution, and Metal–Insulator Transition of NaxRhO2 Crystals (0.25 ≤ x ≤ 1)
  92. Temperature-driven topological transition in 1T'-MoTe2
  93. Orphan Spins in the S=52 Antiferromagnet CaFe2O4
  94. Quasiparticle interference of surface states in the type-II Weyl semimetal WTe2
  95. Review of Spin–Orbit Coupled Semimetal SrIrO3 in Thin Film Form
  96. Effects of substrate temperature and oxygen pressure on microstructures and conductivity of Ba0.95La0.05PbO3 thin films
  97. Spin-Glass-Like Behavior and Topological Hall Effect in SrRuO3/SrIrO3 Superlattices for Oxide Spintronics Applications
  98. Multiplex magnetic field annealing evoked remarkable GMI improvement in co-based amorphous wires
  99. Microstructure of Ni–Al powder and Ni–Al composite coatings prepared by twin-wire arc spraying
  100. Depotassiation of K0.62RhO2 and electronic property of the end-product K0.32RhO2 single crystal
  101. Domain Transformation and MI of Melt-extracted Co68.15Fe4.35Si12.25B13.25Nb1Cu1 Microwires by Cryogenic Joule Annealing
  102. Isothermal kinetics approach to investigate the structure relaxation of amorphous alloys
  103. Erratum: Tunable semimetallic state in compressive-strainedSrIrO3films revealed by transport behavior [Phys. Rev. B 91, 035110 (2015)]
  104. Tunable semimetallic state in compressive-strainedSrIrO3films revealed by transport behavior
  105. Exploring multiferroic materials based on artificial superlattice LaFeO3-YMnO3 and natural superlattice n-LaFeO3-Bi4Ti3O12 thin films
  106. Metal-semiconductor-transition observed in Bi2Ca(Sr, Ba)2Co2O8+δ single crystals
  107. Growth, structure and physical properties of gadolinium doped Sr2IrO4 single crystal
  108. Sensitively Temperature-Dependent Spin–Orbit Coupling in SrIrO3Thin Films
  109. Microstructure and mechanical properties of twin-wire arc sprayed Ni-Al composite coatings on 6061-T6 aluminum alloy sheet
  110. TEM study of SrIrO3 thin films with various thicknesses grown on (001) SrTiO3 substrates synthesized by pulsed laser deposition
  111. The microstructure and magnetic property of TiO2-terminated SrTiO3substrate selected growth cubic phase CaRuO3film
  112. Metal–insulator transition in SrIrO 3 with strong spin–orbit interaction
  113. High temperature solution growth, chemical depotassiation and growth mechanism of KxRhO2 crystals
  114. Crystallisation surface microtopography of [1120]- direction growth sapphire crystal
  115. Enhancing GMI properties of melt-extracted Co-based amorphous wires by twin-zone Joule annealing
  116. Tridimensional morphology and kinetics of etch pit on the {0001} plane of sapphire crystal
  117. Process design for the shape control of crystals grown by Kyropoulos or SAPMAC method
  118. Bonding Layer Microstructures and Mechanical Behavior of Sapphire/Sapphire Joints Diffusion-bonded using MgO-Al2O3-SiO2 Interlayer
  119. Theoretical analysis of the shape evolution of crystals grown by pulling
  120. Haze in sapphire crystals grown by SAPMAC method
  121. Quantitative process design of 1-D crystallization for pure melt
  122. Calculating activation energy of amorphous phase with the Lambert W function
  123. Investigation of precipitation phases in as-cast wedge ingot of bulk amorphous Zr56.6Cu17.3Ni12.5Al9.6Ti4 alloy
  124. Evolution of the primary crystals and the amorphous matrix following annealing of a bulk Zr56.6Cu17.3Ni12.5Al9.6Ti4 metallic glass