All Stories

  1. Experimental Assessment on the Combustion Speed and Stabilization Limits of Ammonia-Methane Premixed Flames in an Industrial Counter Combustor
  2. The Impact of Engine Speed on Performance and Emission Characteristics of Engine Fueled with Diesel-Water Emulsion
  3. Energy and exergy analysis for VCRS of a water dispenser
  4. The effect of Tio2 nanofluid cooling on solar panels’ electrical and thermal efficiencies under outdoor conditions
  5. Performance Improvement and Emissions Reduction with Environmentally Friendly Water-Diesel Emulsion Fuel
  6. Using froude and weber numbers to represent the changes in the flow pattern from stratified to stratified-wavy or plug for wire-on-tube condenser
  7. Entropy Generation analysis for vertical flat and corrugated surface by Natural Convection and Radiation at constant heat flux
  8. Experimental and numerical analyses of water droplet condensation on photovoltaic surfaces under clean and dusty conditions
  9. Flow Patterns in Wire-on-Tube Heat Exchangers Based on Various Low Refrigerant Mass Flow Rates
  10. The Change of Flow Pattern from Stratified to Stratified-Wavy for Condensation in Wire on Tube Heat Exchangers
  11. Thermal Analysis of Wire on Tube Condenser by Exergy and Penalty Factor Methods
  12. Analytical Study of Intake Air Temperature Effect on SI Engine Performance and Emissions
  13. Characterization of the Thermophysical Properties of Paraffin-Based Nanocomposite Containing Alumina and Iron Oxide Nanoparticles
  14. Chest Freezer Performance with Non-Condensable Gases
  15. Study the Behaviour of Chest Freezer Working with R134a and R600a Under Pull Down and Loading States
  16. Enhancement of PV/T Solar Collector Efficiency Using Alumina Nanoparticles Additives
  17. Theoretical Entropy Generation Analysis for Forced Convection Flow Around a Horizontal Cylinder
  18. Exergy Analysis of Chest Freezer Working with R-134a and R-600a at Steady State Conditions
  19. Analysis of Entropy Generation for Horizontal Heated Cylinder by Natural Convection and Radiation
  20. In Tube Condensation: Changing the Pressure Drop into a Temperature Difference for a Wire-on-Tube Heat Exchanger
  21. Study the Thermal Efficiencies for Household Compressors
  22. Emissions Characteristics and Engine Performance from the Interaction Effect of EGR and Diesel-Ethanol Blends in Diesel Engine
  23. Modeling of Heat Transfer and Steam Condensation Inside a Horizontal Flattened Tube
  24. Prediction of Heat Transfer Coefficient and Pressure Drop in Wire Heat Exchanger Working with R-134a and R-600a
  25. Exergy Analysis of a Domestic Refrigerator
  26. Entropy Generation Minimization Theoretical Analysis for External Flow Around Horizontal Cylinder at low Reynold Number
  27. Prediction of Performance Equations for Household Compressors Depending on Manufacturing Data for Refrigerators and Freezers