All Stories

  1. Studies on energy recovery from microalgae and plants wastes
  2. Tailoring thermal, structural, and photocatalytic properties of electrospun poly(ether ether ketone) nanocomposite membranes through TiO2 integration
  3. Advanced Polyethersulfone Membranes with Silver-Loaded Zeolite for Simultaneous Heavy Metal Removal and Antibacterial Protection
  4. Experimental Valorization of Recycled Palm Oil in Topical Formulations: Preparation, Characterization, and Antimicrobial Assessment
  5. Study on the Structure, Thermal Properties and Antibacterial Properties of Phosphorus-Modified PVA/TiO2 Composite Films
  6. Valorisation of Recycled Cotton as Reinforcement in Recycled Polypropylene Composites
  7. Thermal degradation mechanism and isothermal sublimation kinetics of DDMEBT: Structure–property correlations for process optimization
  8. Alternative energy sources from wastes and microalgae Chlorella vulgaris used for the capture of atmospheric CO2 in the production of cement
  9. Multifaceted Nanocomposites Combining Phosphorylated PVA, MXene, and Cholesteric Liquid Crystal: Design and Application Insights
  10. Long-Term Physical and Chemical Stability and Energy Recovery Potential Assessment of a New Chelating Resin Used in Brine Treatment for Chlor-Alkali Plants
  11. Lignin as a Bioactive Additive in Chlorzoxazone-Loaded Pharmaceutical Tablets
  12. Effects of the Central Unit Structure, Lateral Substitution and Symmetry on the Mesomorphic Behavior of Some Bent‐Core Azoester Derivatives
  13. Effects of biofiltration on the physical-chemical-biological profile of the aerial plants used for toluene removal from waste air, revealing new opportunities for circular economy
  14. Influence of Lignin Type on the Properties of Hemp Fiber-Reinforced Polypropylene Composites
  15. Thermodynamic properties of binary, ternary and quaternary mixtures: N‑butyl acetate- n-hexanol - n,n-dimethylacetamide-water. Modeling using regression algorithms and optimization using socially-inspired evolutionary algorithms
  16. Composite Materials Based on Spent Coffee Grounds and Paper Pulp
  17. Evaluation of natural ageing of alkyd paints used for wood protection
  18. Tailoring the Structure and Physico-Chemical Features of Cellulose-Based Hydrogels Using Multi-Epoxy Crosslinking Agents
  19. Experimental Study on the Reaction of Magnesium in Carbon Dioxide and Nitrogen Atmosphere
  20. Exploring innovative synthetic solutions for advanced polymer-based electrochromic energy storage devices: Phenoxazine as a promising chromophore
  21. Thermal stability and degradation mechanism of C60 fullerene‐based polymers
  22. Development of Solid Lipid Nanoparticles for Controlled Amiodarone Delivery
  23. Simultaneous Enhancement of Flame Resistance and Antimicrobial Activity in Epoxy Nanocomposites Containing Phosphorus and Silver-Based Additives
  24. Flame-Resistant Poly(vinyl alcohol) Composites with Improved Ionic Conductivity
  25. Organophosphorus Reinforced Poly(vinyl alcohol) Nanocomposites Doped with Silver-Loaded Zeolite L Nanoparticles as Sustainable Materials for Packaging Applications
  26. Organophosphorus Reinforced Poly(vinyl alcohol) Nanocomposites Doped with Silver-loaded Zeolite L Nanoparticles as Sustainable Materials for Packaging Applications
  27. Polyimide-Derived Supramolecular Systems Containing Various Amounts of Azochromophore for Optical Storage Uses
  28. Recycling of Nonwoven Waste Resulting from the Manufacturing Process of Hemp Fiber-Reinforced Recycled Polypropylene Composites for Upholstered Furniture Products
  29. Cobalt Ferrite/Polyetherimide Composites as Thermally Stable Materials for Electromagnetic Interference Shielding Uses
  30. Electrospun Nanofibers Based on Polymer Blends with Tunable High-Performance Properties for Innovative Fire-Resistant Materials
  31. Thermal Properties and Flammability Characteristics of a Series of DGEBA-Based Thermosets Loaded with a Novel Bisphenol Containing DOPO and Phenylphosphonate Units
  32. Tailoring Thermal and Electrical Properties of Jeffamine Segmented Polyetherimide Composite Films Containing BaTiO3 particles
  33. Optical and Flame-Retardant Properties of a Series of Polyimides Containing Side Chained Bulky Phosphaphenanthrene Units
  34. Evaluation of the Sublimation Process of Some Purine Derivatives: Sublimation Rate, Activation Energy, Mass Transfer Coefficients and Phenomenological Models
  35. Effects of Phosphorus and Boron Compounds on Thermal Stability and Flame Retardancy Properties of Epoxy Composites
  36. Thermal and Mechanical Characterization of Coir Fibre–Reinforced Polypropylene Biocomposites
  37. Moving towards Valorization of Biowastes Issued from Biotrickling Filtration of Contaminated Gaseous Streams: A Thermochemical Analysis-Based Perspective
  38. Viscosity Deviation Modeling for Binary and Ternary Mixtures of Benzyl Alcohol-N-Hexanol-Water
  39. Eco‐friendly flame retardant epoxy nanocomposites based on polyphosphonate and halloysite nanotubes
  40. Phosphorylated Poly(vinyl alcohol) Electrospun Mats for Protective Equipment Applications
  41. Isothermal Drying Kinetic Study of Spent Coffee Grounds Using Thermogravimetric Analysis
  42. Characterisation of Hemp Fibres Reinforced Composites Using Thermoplastic Polymers as Matrices
  43. Physicochemical characterization and energy recovery of spent coffee grounds
  44. Mesomorphic and Thermal Behavior of Symmetric Bent-Core Liquid Crystal Compounds Derived from Resorcinol and Isophthalic Acid
  45. Nanocomposite Biopolymer Arboblend V2 Nature AgNPs
  46. Thermal characterization and rheological behavior of some varnishes and paints used for wood protection
  47. Tailoring poly(ether-imide) films features towards high performance flexible substrates
  48. New fire-resistant epoxy thermosets: nonisothermal kinetic study and flammability behavior
  49. Kinetics of drying of certain lacquers and paints in isothermal conditions using a thermogravimetric analyser
  50. New electromagnetic shielding materials based on viscose‐carbon nanotubes composites
  51. Elucidating the thermal degradation of carbazole‐containing platinum–polyyne polymers
  52. Metal content and crude polysaccharide characterization of selected mushrooms growing in Romania
  53. MULTIPLE LINEAR REGRESSION (MLR) MODELS USED TO PREDICT THE THERMAL STABILITY OF SOME POLYIMIDES
  54. Mesoporous aluminosilicate macrospheres obtained by spray gelling technique
  55. Structure-property relationship of sodium deoxycholate based poly(ester ether)urethane ionomers for biomedical applications
  56. Thermal behavior of hydrophobically modified hydrogels using TGA/FTIR/MS analysis technique
  57. Thermal and thermo-oxidative degradation of some heterocyclic aromatic polyethers containing phenylquinoxaline and/or 1,3,4-oxadiazole rings
  58. Unsymmetrical banana-shaped liquid crystalline compounds 1 derived from 2,7-dihydroxynaphtalene
  59. Tinctorial Response of Recycled PET Fibers to Chemical Modifications during Saponification and Aminolysis Reactions
  60. Sorption and thermal properties of strongly basic cross-linked ionic polymer modified with Cr(III) compounds
  61. Gamma irradiation of protein-based textiles for historical collections decontamination
  62. Fluorinated poly(1,3,4-oxadiazole-ether)s. Thermooxidative stability and kinetic studies
  63. Thermal Degradation and Kinetic Studies of New Flame-Retardant Phosphorus-Containing Polymers with Liquid Crystalline Properties
  64. Study of thermal behavior of polyimides containing pendent-substituted azobenzene units
  65. A straightforward, eco-friendly and cost-effective approach towards flame retardant epoxy resins
  66. Symmetric Bent-core Liquid Crystals of Some Schiff Bases Containing Azo Linkage
  67. The behavior of the AV-17(Cr) sorbent in various media
  68. Evaluation of the thermal stability and set recovery of thermo-hydro-mechanically treated lime (Tilia cordata) wood
  69. Study of thermal behaviour of some edible mushrooms
  70. New cholesteryl containing bent core liquid crystals
  71. Preparation and phase behavior of blends of polysulfone‐based polymers with phosphorous‐containing smectic‐A liquid crystals
  72. Core–shell magnetic chitosan particles functionalized by grafting: Synthesis and characterization
  73. New highly thermostable aromatic polyamides with pendant phthalonitrile groups
  74. Spectroscopic, thermal and antimicrobial properties of the copper(II) complex of Schiff base derived from 2-(salicylidene) aminopyridine
  75. New hydrogels based on maleilated collagen with potential applications in tissue engineering
  76. Synthesis and Thermal Analysis of a Magnetic Composite by Thermogravimetry Coupled to Fourier Transform Infrared Spectroscopy and Mass Spectrometry
  77. New iron-cobalt clusters with silicon-containing dicarboxylic acids
  78. The Seashell Wastes as Biosorbent for Reactive Dye Removal from Textile Effluents
  79. Some metal compounds in the phase of crosslinked ionic polymer-precursors for new sorbents and catalysts
  80. Ultra dispersed particles of Fe(III) compounds in the strongly basic crosslinked ionic polymer-precursors for new sorbents and catalysts
  81. Poly(ether imide)s containing cyano substituents and thin films made from them
  82. Crosslinked polysulfone obtained by Wittig-Horner reaction in biphase system
  83. Thermal degradation of some [1,3,4]oxadiazole derivatives with liquid crystalline properties
  84. Ferrocene derivatives thermostability prediction using neural networks and genetic algorithms
  85. New hybrid materials based on layered double hydroxides and antioxidant compounds. Preparation, characterization and release kinetic studies
  86. Hockey Stick Liquid Crystals Based on a 2,5-Asymmetric Disubstituted [1,3,4]Oxadiazole Core
  87. Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods
  88. Effect of thermal curing on the properties of thin films based on benzophenonetetracarboxylic dianhydride and 4,4′-diamino-3,3′-dimethyldiphenylmethane
  89. Thermal degradation and pyrolysis study of phosphorus-containing polysulfones
  90. On the correlation between thermal analysis results and corrosion behaviour of some metallic religious artefacts
  91. Experimental densities of binary mixtures: Acetic acid with benzene at several temperatures
  92. Experimental densities of binary mixtures: Acetic acid with benzene at several temperatures
  93. Preparation, characterization and applicability of cellulose acetate–polyurethane blend membrane in separation techniques
  94. Thin films based on benzophenontetracarboxylic dianhydride and 4,4'-diamino-3,3'-dimethyldiphenylmethane
  95. Investigation of thermal degradation of some ferrocene liquid crystals
  96. Thermal behavior of biodegraded lime wood
  97. Comparative study of aromatic polyimides containing methylene units
  98. Thermogravimetric analysis of fungus-degraded lime wood
  99. Synthesis and characterization of phosphorus-containing polystyrene
  100. N-methylimidazolium functionalized strongly basic anion exchanger: Synthesis, chemical and thermal stability
  101. ARTIFICIAL NEURAL NETWORK FOR PREDICTION OF EXCESS REFRACTIVE INDICES OF SOME BINARY MIXTURES
  102. Compared properties of azopolyimides
  103. Study on metal complexes of chelating resins bearing iminodiacetate groups
  104. Tannic acid incorporation in chitosan-based microparticles and in vitro controlled release
  105. Characterization by Dynamic Thermal Methods of Some Bis-Azopolyethers with Flexible Spacer
  106. Thermogravimetric characterization of chitosan/alginate microparticles loaded with different drugs
  107. Thermogravimetric analysis of layered double hydroxides with chloramphenicol and salicylate in the interlayer space
  108. Synthesis and photochromic behavior of new polyimides containing azobenzene side groups
  109. Synthesis and characterization of new aromatic polyesters and poly(ester-imide)s containing phosphorous cyclic bulky groups
  110. REFRACTIVE INDICES OF THE BINARY SYSTEMS ISO-PROPANOL - WATER AND ISO-PROPANOL - TOLUENE
  111. The Non-isothermal Degradation Process of some Polyethers and Azo-polyethers
  112. Polyimide‐Polydimethylsiloxane Copolymers. Evaluation of the Thermal and Electrical Properties
  113. Thermal stability of some ferrocene containing schiff bases
  114. Kinetics of thermal degradation in non-isothermal conditions of some phosphorus-containing polyesters and polyesterimides
  115. Thermal Behavior of Aromatic Polysulfones with Pendent Viologen Groups
  116. Thermal behavior of some cholesteric esters
  117. Interaction of chitosan with natural or synthetic anionic polyelectrolytes. 1. The chitosan–carboxymethylcellulose complex
  118. Thermotropic properties of ferrocene derivatives bearing a cholesteryl unit: structure-properties correlations
  119. Synthesis and un-isotherm kinetic study of some ferrocene acids
  120. Physico-chemical properties of Chitosan films
  121. Mass transfer resistance in liquid–liquid extraction with individual phase mixing
  122. The determination of individual mass transfer coefficients in liquid-liquid extraction
  123. Thermal behaviour of polystyrene, polysulfone and their substituted derivatives
  124. Mass transfer coefficients in liquid–liquid extraction