All Stories

  1. Investigation of high frequency loss in electrical machine lamination considering skin effect and hysteresis

    Article • International Journal of Applied Electromagnetics and Mechanics, January 2021, IOS Press

    Krzysztof Komeza

  2. Architecture choices for high-temperature synchronous machines

    Article • Open Physics, October 2020, De Gruyter

    Ewa Napieralska Juszczak, Krzysztof Komeza, Piotr Napieralski, Danil ROGER

  3. High Temperature Permanent Magnet Synchronous Machine Analysis of Thermal Field

    Article • Open Physics, January 2019, De Gruyter

    Krzysztof Komeza

  4. High temperature machines: topologies and preliminary design

    Article • Open Physics, January 2019, De Gruyter

    Krzysztof Komeza

  5. Influence of massive ferromagnetic shaft on the distribution of electromagnetic field and magnetising current for two- and four-pole induction motors at frequencies of 50 and 200 Hz

    Article • IET Electric Power Applications, August 2018, the Institution of Engineering and Technology (the IET)

    Krzysztof Komeza

  6. Selected papers from ISEF-2017 Conference

    Article • International Journal of Applied Electromagnetics and Mechanics, April 2018, IOS Press

    Krzysztof Komeza

  7. Methods for increasing the efficiency of an asynchronous motor with increased speed fed from the PWM inverter

    Article • International Journal of Applied Electromagnetics and Mechanics, April 2018, IOS Press

    Krzysztof Komeza

  8. PWM AC drives: Use of carriers of different frequencies to control the magnetic noise

    Article • International Journal of Applied Electromagnetics and Mechanics, April 2018, IOS Press

    Krzysztof Komeza

  9. Numerical analysis of thermal and mechanical field in the high temperature permanent magnet synchronous Machine

    Article • December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  10. Measurement of contact resistance for copper and aluminium conductors

    Article • International Journal of Applied Electromagnetics and Mechanics, April 2017, IOS Press

    Ewa Napieralska Juszczak, Krzysztof Komeza

  11. The Influence of Electrical Sheet on the Core Losses at No-Load and Full-Load of Small Power Induction Motors

    Article • IEEE Transactions on Industrial Electronics, March 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  12. Variation of additional losses at no-load and full-load for a wide range of rated power induction motors

    Article • Electric Power Systems Research, February 2017, Elsevier

    Krzysztof Komeza

  13. Analysis of the impact of the design of HT machines on the cogging torque and losses in permanent magnets

    Article • December 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  14. Distribution of electrical conductivity in the stranded CD cable

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, November 2016, Emerald

    Ewa Napieralska Juszczak, Krzysztof Komeza

  15. Effect of the shaft on the distribution of the magnetic field for two and four-pole induction motors

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  16. Analysis of influence of rotor design on high speed small power induction motors parameters

    Article • International Journal of Applied Electromagnetics and Mechanics, April 2016, IOS Press

    Krzysztof Komeza

  17. Influence of the closing rotor slots on the additional losses in the induction motor

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, March 2015, Emerald

    Krzysztof Komeza

  18. Comparison of no-load and load core losses for a wide range of nominal power induction motors

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  19. Dependence of the Contact Resistance on the Design of Stranded Conductors

    Article • Sensors, July 2014, MDPI AG

    Krzysztof Komeza

  20. Performance Characteristics of a High-Speed Energy-Saving Induction Motor With an Amorphous Stator Core

    Article • IEEE Transactions on Industrial Electronics, June 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  21. Identification of current flow depending on the mechanical deformation in a stranded cable

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, July 2013, Emerald

    Krzysztof Komeza

  22. Cryptorhychinae de France (Coleoptera Curculionidae). -1 . Analyse générique à l'échelle paléarctique occidentale

    Article • Bulletin mensuel de la Société linnéenne de Lyon, January 2013, PERSEE Program

    Krzysztof Komeza

  23. 3D harmonic model of the end region for turbogenerators

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, September 2012, Emerald

    Krzysztof Komeza

  24. Coupling of the evolution strategy algorithm and genetic algorithm with finite element mesh adaptation

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, September 2012, Emerald

    Ewa Napieralska Juszczak, Piotr Napieralski, Krzysztof Komeza

  25. Performance characteristics of a high-speed energy-saving induction motor with an amorphous stator core

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  26. Finite-Element and Analytical Calculations of No-Load Core Losses in Energy-Saving Induction Motors

    Article • IEEE Transactions on Industrial Electronics, July 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  27. Using the FEM Meshes Adaption and Genetic Algorithms for Identification of Permeability in Normal Direction of Anisotropic Sheets

    Article • IEEE Transactions on Magnetics, February 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  28. Automated B–H curve identification algorithm combining field simulation with optimisation methods and exploiting parallel computation

    Article • IET Science Measurement & Technology, January 2012, the Institution of Engineering and Technology (the IET)

    Krzysztof Komeza

  29. Experimental and Numerical Characterization of Magnetically Anisotropic Laminations in the Direction Normal to Their Surface

    Article • IEEE Transactions on Magnetics, November 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  30. Coupling field analysis and non-deterministic optimization by means of multiprocessor parallel computation for characterizing magnetic anisotropy

    Article • January 2011, the Institution of Engineering and Technology (the IET)

    Krzysztof Komeza

  31. Determination of performance parameters of a small-size high-speed induction motor using the field-circuit method

    Article • January 2011, the Institution of Engineering and Technology (the IET)

    Krzysztof Komeza

  32. Equivalent Permeability of Step-Lap Joints of Transformer Cores: Computational and Experimental Considerations

    Article • IEEE Transactions on Magnetics, January 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  33. Field and circuit calculation of the core losses in the energy-saving small-size induction motor

    Article • September 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  34. Computer modelling of 3D transient thermal field coupled with electromagnetic field in three‐phase induction motor on load

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, July 2010, Emerald

    Krzysztof Komeza

  35. Simplified models including eddy currents for laminated structures

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, July 2010, Emerald

    Krzysztof Komeza

  36. Computer modelling of 3D transient thermal field coupled with electromagnetic field in one‐phase induction motor with locked rotor

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, July 2008, Emerald

    Krzysztof Komeza

  37. Computer Modelling of Energy-Saving Small Size Induction Electromechanical Converter

    Article • January 2008, Springer Science + Business Media

    Krzysztof Komeza

  38. EMI of large power systems: magnetic field calculation by substituting surface quantities for complex sources

    Article • The European Physical Journal Applied Physics, June 2007, EDP Sciences

    Krzysztof Komeza

  39. Application of circuit and field‐circuit methods in designing process of small induction motors with stator cores made from amorphous iron

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, April 2006, Emerald

    Krzysztof Komeza

  40. The highly efficient three‐phase small induction motors with stator cores made from amorphous iron

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, September 2004, Emerald

    Krzysztof Komeza

  41. Computer simulation of dynamic states of the silicon micromotor

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 1998, Emerald

    Krzysztof Komeza

  42. Numerical modeling of transient heating of solid plate 3D structure

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 1998, Emerald

    Krzysztof Komeza

  43. Transient states analysis of 3D transformer structure

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 1998, Emerald

    Krzysztof Komeza

  44. COMPUTATION OF ROTOR WINDINGS POWER LOSSES IN SQUIRREL‐CAGE INDUCTION MOTOR

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, April 1995, Emerald

    Krzysztof Komeza

  45. Comparative computation of forces and torques of electromagnetic devices by means of different formulae

    Article • IEEE Transactions on Magnetics, September 1994, Institute of Electrical & Electronics Engineers (IEEE)

    Krzysztof Komeza

  46. ELECTROMAGNETIC FIELD CALCULATION OF A LEAKAGE TRANSFORMER BY MEANS OF FINITE ELEMENT METHOD WITH HERMITIAN ELEMENTS

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 1994, Emerald

    Krzysztof Komeza

  47. FIELD AND FORCE CALCULATION OF ELECTROMAGNET WITH HIGH FREQUENCY OPERATION

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 1992, Emerald

    Krzysztof Komeza

  48. EXPERIMENTAL VERIFICATION OF FIELD-CIRCUIT FINITE ELEMENTS MODELS OF INDUCTION MOTORS FEED FROM INVERTER

    Article • Springer Science + Business Media

    Krzysztof Komeza

  49. The 3D-Analysis of the Field Distribution of Fractional Power Induction Motor

    Article • Springer Science + Business Media

    Krzysztof Komeza