All Stories

  1. Immersive Intelligent Aesthetics for Visualising Extreme Fires
  2. Experimental and numerical investigation of burning characteristics of Australian pine trees for wildfire modelling
  3. Insight into laboratory-scale junction-fire dynamics using 3-D physics-based numerical simulations
  4. An experimental study on the suppression of shielded fires by water mist sprays in a compartment
  5. Effect of bio-fillers on the mechanical, thermal, and fire properties of gypsum composites
  6. Experimental study of pinewood samples incorporating multiple flame-retardant additives under varied heat fluxes in a cone calorimeter
  7. An experimental investigation of the pyrolysis behaviour of pine wood with different fire-retardant additives
  8. Mixing of a cylindrical gravity current in a stratified ambient
  9. Evaluation of exterior wall cavity fires using an intermediate scale test method
  10. Experimental study of pinewood samples incorporating multiple flame-retardant additives under varied heat fluxes in a cone calorimeter
  11. Thermal and calorimetric investigations of some vegetative fuels
  12. Effect of stratification on the propagation of a cylindrical gravity current
  13. Experimental and Numerical Studies on the Efficacy of Water Mist to Suppress Hydrocarbon Fires in Enclosures
  14. On the propagation of planar gravity currents into a stratified ambient
  15. Fire control and self-extinguishment by blocking smoke flow with water spray in a tunnel fire
  16. Physics-based modelling of wind-driven junction fires
  17. Quantifying Firebrand and Radiative Heat Flux Risk on Structures in Mallee/Mulga-Dominated Wildland–Urban Interface: A Physics-Based Approach
  18. Penumbra2.0
  19. A preliminary study on the fire suppression efficacy of a prototype system on hydrocarbon-based diffusion flames
  20. Field-Scale Physical Modelling of Grassfire Propagation on Sloped Terrain under Low-Speed Driving Wind
  21. Numerical simulation of two parallel merging wildfires
  22. Physics-based modelling for mapping firebrand flux and heat load on structures in the wildland–urban interface
  23. Physics-based modelling of junction fires: Effects of some topographical parameters in intersecting fires
  24. Validation of FDS for simulating merging fires
  25. Boron-glycerol complexes make epoxies fire retardant
  26. Implementation of spatially-varying wind adjustment factor for wildfire simulations
  27. Physics-based modelling of junction fires: parametric study
  28. Simulated behaviour of wildland fire spreading through idealised heterogeneous fuels
  29. THE EFFECTS OF VARIATION IN SHAPE OF SMOKE RESERVOIRS AND NUMBERS AND DISTRIBUTION OF SMOKE EXTRACTION POINTS ON THE TENABILITY WITHIN A COMPARTMENT
  30. Physics-based simulations of grassfire propagation on sloped terrain at field scale: flame dynamics, mode of fire propagation and heat fluxes†
  31. Physics-based simulations of grassfire propagation on sloped terrain at field scale: motivations, model reliability, rate of spread and fire intensity†
  32. The Ignition Frequency of Structural Fires in Australia from 2012 to 2019
  33. A review of firebrand studies on generation and transport
  34. Numerical Study of Junction Fires on Sloped Terrain for Grassland Vegetation
  35. The Behaviour of Water-Mists in Hot Air Induced by a Room Fire: Effect of the Initial Size of Droplets
  36. Firebrand transport from a novel firebrand generator: numerical simulation of laboratory experiments
  37. An Approach to Determine the Median Diameter of Droplets in a Water-Mist Spray
  38. Determining Firebrand Generation Rate Using Physics-Based Modelling from Experimental Studies through Inverse Analysis
  39. The Role of Heat Flux in an Idealised Firebreak Built in Surface and Crown Fires
  40. LITHIUM-ION BATTERY FIRE SUPPRESSION USING WATER MIST SYSTEMS
  41. Numerical study on effect of relative humidity (and fuel moisture) on modes of grassfire propagation
  42. Featured Cover
  43. Reconstruction of a Multi-item Room Fire in an ISO 9705 Room
  44. Fire Safety Risk Analysis of Conventional Submarines
  45. Sensitivity and Uncertainty Analyses of Human and Organizational Risks in Fire Safety Systems for High-Rise Residential Buildings with Probabilistic T-H-O-Risk Methodology
  46. Combustion efficiency during fires in tunnels with natural ventilation by vitiated air including descending smoke
  47. Passive fire protection of wood using some bio-derived fire retardants
  48. A Review of Experimental and Numerical Studies of Lithium Ion Battery Fires
  49. A response to comments of Cruz et al. on: ‘Simulation study of grass fire using a physics-based model: striving towards numerical rigour and the effect of grass height on the rate of spread'
  50. Impact of Technical, Human, and Organizational Risks on Reliability of Fire Safety Systems in High-Rise Residential Buildings—Applications of an Integrated Probabilistic Risk Assessment Model
  51. A Review of Lithium-Ion Battery Fire Suppression
  52. Numerical Simulation of Coupled Pyrolysis and Combustion Reactions with Directly Measured Fire Properties
  53. A Kinetic Analysis of the Thermal Degradation Behaviours of Some Bio-Based Substrates
  54. Mechanistic Aspects of Condensed- and Gaseous-Phase Activities of Some Phosphorus-Containing Fire Retardants
  55. Reliability of fire (point) detection system in office buildings in Australia – A fault tree analysis
  56. Physics-Based Simulations of Flow and Fire Development Downstream of a Canopy
  57. Incorporation of technical, human and organizational risks in a dynamic probabilistic fire risk model for high‐rise residential buildings
  58. Thermal and Calorimetric Evaluations of Some Chemically Modified Carbohydrate-Based Substrates with Phosphorus-Containing Groups
  59. Fire cooling performance by water sprays using medium and small-scale model experiments with scaling relaxation
  60. A response to comments of Cruz et al. on: 'The effect of ignition protocol on the spread rate of grass fires'
  61. The effect of ignition protocol on grassfire development
  62. Measurements of specific heat capacity of common building materials at elevated temperatures: a comparison of DSC and HDA
  63. Correction to: Characterisation of pyrolysis and combustion parameters of charring materials most frequently found in buildings
  64. A Study of the Thermal Degradation and Combustion Characteristics of Some Materials Commonly Used in the Construction Sector
  65. Characterisation of pyrolysis and combustion parameters of charring materials most frequently found in buildings
  66. Systematic review of human and organizational risks for probabilistic risk analysis in high-rise buildings
  67. Physics-Based Simulation of Heat Load on Structures for Improving Construction Standards for Bushfire Prone Areas
  68. Modelling of tree fires and fires transitioning from the forest floor to the canopy with a physics-based model
  69. Probabilistic Risk Assessment of Life Safety for a Six-Storey Commercial Building with an Open Stair Interconnecting Four Storeys: A Case Study
  70. Effect of residual air bubbles on diesel spray structure at the start of injection
  71. Reliability of sprinkler system in Australian shopping centres –A fault tree analysis
  72. Development of a technique for establishing a pseudo tunnel length
  73. Experimental investigation of effects of variation in heating rate, temperature and heat flux on fire properties of a non-charring polymer
  74. Effects of scale ratio and aspect ratio in predicting the longitudinal smoke-temperature distribution during a fire in a road tunnel with vertical shafts
  75. Critical velocity and backlayering distance in tunnel fires with longitudinal ventilation taking thermal properties of wall materials into consideration
  76. Simulation study of grass fire using a physics-based model: striving towards numerical rigour and the effect of grass height on the rate of spread
  77. An experimental study on timely activation of smoke alarms and their effective notification in typical residential buildings
  78. Method of identifying burning material from its smoke using attenuation of light
  79. Modeling for predicting the temperature distribution of smoke during a fire in an underground road tunnel with vertical shafts
  80. Verification of a Lagrangian particle model for short-range firebrand transport
  81. Kinetics of pyrolysis of litter materials from pine and eucalyptus forests
  82. On linking the filter width to the boundary layer thickness in explicitly filtered large eddy simulations of wall bounded flows
  83. Designing an experimental rig for developing a fire severity model using numerical simulation
  84. Experimental and numerical study of high-pressure water-mist nozzle sprays
  85. Study of water-mist behaviour in hot air induced by a room fire: Model development, validation and verification
  86. Reliability of sprinkler system in Australian high rise office buildings
  87. Use of nanoclay to improve the fire performance of glass fibre composites
  88. Rise in structural steel temperatures during ISO 9705 room fires
  89. Numerical simulation for turbulence-driven secondary motion over a streamwise external corner
  90. The effect of changing the fuel of the LASTFIRE test
  91. An experimental study of fire development in deep enclosures and a new HRR-time-position model for a deep enclosure based on ventilation factor
  92. Evaluation of the Impact of Potential Fire Scenarios on Structural Elements of a Cable-Stayed Bridge
  93. Some comments on CFD simulation based on BRE fire tests
  94. Estimating the Reliability of Sprinkler Systems in Australian High-rise Office Buildings
  95. Sprinklered office fire tests
  96. Similarity solution of mean streamwise flow along an external corner bisector
  97. The Effect of Fuel Quantity and Location on Small Enclosure Fires
  98. Testing and factors relevant to the evaluation of the structural adequacy of steel members within fire-resistant elevator shafts
  99. Experimental investigation of turbulence-driven secondary motion over a streamwise external corner
  100. Experimental investigation of turbulent boundary layer developing along a streamwise external corner (chine)
  101. Turbulence Intensity Distribution for Flow Along a Streamwise External Corner