All Stories

  1. Experimental and numerical investigation of an innovative non-combustion impulse gas turbine for micro-scale electricity generation

    Article • Energy, March 2023, Elsevier

    Dr Jundika Candra Kurnia

  2. Numerical Investigation of Boiling Flow in Oval Tube with Different Ellipticity

    Article • ECS Transactions, April 2022, The Electrochemical Society

    Dr Jundika Candra Kurnia

  3. Pore-Scale Modeling in Metal Foam Heat Exchanger

    Article • ECS Transactions, April 2022, The Electrochemical Society

    Dr Jundika Candra Kurnia

  4. Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond

    Article • ECS Transactions, April 2022, The Electrochemical Society

    Dr Jundika Candra Kurnia

  5. Thermal and hydraulic analysis of a novel double-pipe geothermal heat exchanger with a controlled fractured zone at the well bottom

    Article • Applied Energy, March 2022, Elsevier

    Dr Jundika Candra Kurnia

  6. Convective Heat Transfer Enhancement of Laminar Herschel–Bulkley Non-Newtonian Fluid in Straight and Helical Heat Exchangers with Twisted Tape Inserts

    Article • Industrial & Engineering Chemistry Research, December 2021, American Chemical Society (ACS)

    Dr Jundika Candra Kurnia

  7. Catalyst Special Issue on Catalytic Reactors Design for Industrial Applications

    Article • Catalysts, March 2021, MDPI AG

    Dr Jundika Candra Kurnia

  8. Geothermal energy extraction using abandoned oil and gas wells:Techno‐economicand policy review

    Article • International Journal of Energy Research, January 2021, Hindawi Publishing Corporation

    Dr Jundika Candra Kurnia

  9. Numerical Investigation of Electronic Cooling with Phase Change Material

    Article • January 2021, Springer Science + Business Media

    Dr Jundika Candra Kurnia

  10. Application of Phase Change Material-Based Thermal Capacitor in Double Tube Heat Exchanger—A Numerical Investigation

    Article • Energies, August 2020, MDPI AG

    Dr Jundika Candra Kurnia

  11. Numerical Investigation of Ventilation Air Methane Catalytic Combustion in Circular Straight and Helical Coil Channels with Twisted Tape Insert in Catalytic-Monolith Reactors

    Article • Catalysts, July 2020, MDPI AG

    Dr Jundika Candra Kurnia

  12. Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method

    Article • Energy, December 2019, Elsevier

    Dr Jundika Candra Kurnia

  13. Performance Evaluation of Liquid Mixing in a T-Junction Passive Micromixer with a Twisted Tape Insert

    Article • Industrial & Engineering Chemistry Research, November 2019, American Chemical Society (ACS)

    Dr Jundika Candra Kurnia

  14. Hydrogen Fuel Cell in Vehicle Propulsion: Performance, Efficiency, and Challenge

    Article • October 2019, Springer Science + Business Media

    Dr Jundika Candra Kurnia

  15. Advances in proton exchange membrane fuel cell with dead-end anode operation: A review

    Article • Applied Energy, October 2019, Elsevier

    Dr Jundika Candra Kurnia

  16. Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: Parametric optimization via Box Behnken Design

    Article • August 2019, Elsevier

    Dr Jundika Candra Kurnia

  17. Thermal Drying Utilizing Intermittent and Pulsating Impinging Jet

    Article • July 2019, Taylor & Francis

    Dr Jundika Candra Kurnia

  18. Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review

    Article • Renewable and Sustainable Energy Reviews, May 2019, Elsevier

    Dr Jundika Candra Kurnia

  19. Numerical Evaluation of Potential Catalyst Savings for Ventilation Air Methane Catalytic Combustion in Helical Coil Reactors with Selective Wall Coating

    Article • Catalysts, April 2019, MDPI AG

    Dr Jundika Candra Kurnia

  20. Entropy Generation and Heat Transfer Performance in Microchannel Cooling

    Article • Entropy, February 2019, MDPI AG

    Dr Jundika Candra Kurnia

  21. Latent Heat Thermal Capacitor in Heat Exchangers- a Computational Investigation

    Article • Energy Procedia, February 2019, Elsevier

    Dr Jundika Candra Kurnia

  22. Catalytic and noncatalytic gasification of wood–coconut shell blend under different operating conditions

    Article • Environmental Progress & Sustainable Energy, October 2018, Wiley

    Dr Jundika Candra Kurnia

  23. Numerical investigation of heat transfer performance of a rotating latent heat thermal energy storage

    Article • Applied Energy, October 2018, Elsevier

    Dr Jundika Candra Kurnia

  24. Thermal Comfort Assessment of an Office Building in Tropical Climate Condition

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr Jundika Candra Kurnia

  25. The Influence of Temperature on Stability of Aluminum Foam Cell Wall during Foaming Process

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr Jundika Candra Kurnia

  26. The Need of Computer Modelling and Simulation (CMS) Competency among Employers in Malaysia

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr Jundika Candra Kurnia

  27. Numerical Evaluation of Heat Transfer and Entropy Generation of Helical Tubes with Various Cross-sections under Constant Heat Flux Condition

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Dr Jundika Candra Kurnia

  28. Comparison of different turbulence models in pipe flow of various Reynolds numbers

    Article • January 2018, American Institute of Physics

    Dr Jundika Candra Kurnia

  29. Numerical investigation on the heat transfer of wellbore heat extractor

    Article • January 2018, American Institute of Physics

    Dr Jundika Candra Kurnia

  30. Heat transfer performance and entropy generation of helical square tubes with various curvature radiuses

    Article • Energy Procedia, December 2017, Elsevier

    Dr Jundika Candra Kurnia

  31. Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions

    Article • Applied Energy, November 2017, Elsevier

    Dr Jundika Candra Kurnia

  32. Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face

    Article • International Journal of Mining Science and Technology, July 2017, Elsevier

    Dr Jundika Candra Kurnia

  33. Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage

    Article • Energy Procedia, May 2017, Elsevier

    Dr Jundika Candra Kurnia

  34. Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications

    Article • Applied Energy, April 2017, Elsevier

    Dr Jundika Candra Kurnia

  35. Performance and potential energy saving of thermal dryer with intermittent impinging jet

    Article • Applied Thermal Engineering, February 2017, Elsevier

    Dr Jundika Candra Kurnia

  36. Numerical investigation of phase change materials thermal capacitor for pipe flow

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Dr Jundika Candra Kurnia

  37. Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Dr Jundika Candra Kurnia

  38. Silicon carbide- from synthesis to application: a review

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Dr Jundika Candra Kurnia

  39. Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method

    Article • Applied Energy, January 2017, Elsevier

    Dr Jundika Candra Kurnia

  40. Heat transfer performance of non-circular coiled tubes - Research summary, challenges and directions

    Article • International Journal of Automotive and Mechanical Engineering, December 2016, Universiti Malaysia Pahang Publisher

    Dr Jundika Candra Kurnia

  41. A novel concept of enhanced gas recovery strategy from ventilation air methane in underground coal mines – A computational investigation

    Article • Journal of Natural Gas Science and Engineering, September 2016, Elsevier

    Dr Jundika Candra Kurnia

  42. Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections

    Article • Applied Thermal Engineering, June 2016, Elsevier

    Dr Jundika Candra Kurnia

  43. Potential catalyst savings in heterogeneous gaseous spiral coiled reactor utilizing selective wall coating – A computational study

    Article • Computers & Chemical Engineering, May 2016, Elsevier

    Dr Jundika Candra Kurnia

  44. Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application

    Article • Heat Transfer Engineering, April 2016, Taylor & Francis

    Dr Jundika Candra Kurnia

  45. Advances in biofuel production from oil palm and palm oil processing wastes: A review

    Article • Biofuel Research Journal, March 2016, Greenwave Publishing of Canada

    Dr Jundika Candra Kurnia

  46. Computational evaluation of thermal management strategies in an underground mine

    Article • Applied Thermal Engineering, November 2015, Elsevier

    Dr Jundika Candra Kurnia

  47. A three-dimensional computational model of H2–air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application

    Article • Applied Energy, August 2015, Elsevier

    Dr Jundika Candra Kurnia

  48. Numerical Investigation of H2-air Premixed Combustion in a Curved Micro-combustor for Thermo-photovoltaic (TPV) Applications

    Article • Energy Procedia, August 2015, Elsevier

    Dr Jundika Candra Kurnia

  49. Numerical Investigation of Heat Transfer Performance of Various Coiled Square Tubes for Heat Exchanger Application

    Article • Energy Procedia, August 2015, Elsevier

    Dr Jundika Candra Kurnia

  50. Optimization of Design Parameters for an Open-cathode Polymer Electrolyte Fuel Cells Stack Utilizing Taguchi Method

    Article • Energy Procedia, August 2015, Elsevier

    Dr Jundika Candra Kurnia

  51. Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study

    Article • International Journal of Mining Science and Technology, July 2015, Elsevier

    Dr Jundika Candra Kurnia

  52. A three-dimensional computational model of H2-air premixed combustion in a circular micro-channel for thermo-photovoltaic (TPV) application

    Article • January 2015, American Institute of Physics

    Dr Jundika Candra Kurnia

  53. Laminar heat transfer performance of power law fluids in coiled square tube with various configurations

    Article • International Communications in Heat and Mass Transfer, October 2014, Elsevier

    Dr Jundika Candra Kurnia

  54. Evaluation of mass transport performance in heterogeneous gaseous in-plane spiral reactors with various cross-section geometries at fixed cross-section area

    Article • Chemical Engineering and Processing - Process Intensification, August 2014, Elsevier

    Dr Jundika Candra Kurnia

  55. CFD simulation of methane dispersion and innovative methane management in underground mining faces

    Article • Applied Mathematical Modelling, July 2014, Elsevier

    Dr Jundika Candra Kurnia

  56. Energy-Efficient Novel Heterogeneous Gaseous T-Junction Microreactor Design Utilizing Inlet Flow Pulsation

    Article • Industrial & Engineering Chemistry Research, May 2014, American Chemical Society (ACS)

    Dr Jundika Candra Kurnia, Puqing Jiang

  57. Prediction and innovative control strategies for oxygen and hazardous gases from diesel emission in underground mines

    Article • The Science of The Total Environment, May 2014, Elsevier

    Dr Jundika Candra Kurnia, Professor Agus P Sasmito

  58. Simulation of a novel intermittent ventilation system for underground mines

    Article • Tunnelling and Underground Space Technology, May 2014, Elsevier

    Dr Jundika Candra Kurnia

  59. Dust dispersion and management in underground mining faces

    Article • International Journal of Mining Science and Technology, January 2014, Elsevier

    Dr Jundika Candra Kurnia

  60. Heat Transfer in Coiled Square Tubes for Laminar Flow of Slurry of Microencapsulated Phase Change Material

    Article • Heat Transfer Engineering, September 2013, Taylor & Francis

    Dr Jundika Candra Kurnia

  61. Energy-efficient thermal drying using impinging-jets with time-varying heat input – A computational study

    Article • Journal of Food Engineering, January 2013, Elsevier

    Dr Jundika Candra Kurnia

  62. Improved design for heat transfer performance of a novel phase change material (PCM) thermal energy storage (TES)

    Article • Applied Thermal Engineering, January 2013, Elsevier

    Dr Jundika Candra Kurnia

  63. Numerical analysis of laminar heat transfer performance of in-plane spiral ducts with various cross-sections at fixed cross-section area

    Article • International Journal of Heat and Mass Transfer, October 2012, Elsevier

    Dr Jundika Candra Kurnia

  64. Numerical evaluation of various gas and coolant channel designs for high performance liquid-cooled proton exchange membrane fuel cell stacks

    Article • Energy, August 2012, Elsevier

    Dr Jundika Candra Kurnia

  65. Computational fluid dynamics (CFD) analysis of micro-reactor performance: Effect of various configurations

    Article • Chemical Engineering Science, June 2012, Elsevier

    Dr Jundika Candra Kurnia

  66. Finite deformation of fast-response thermo-sensitive hydrogels – A computational study

    Article • Polymer, May 2012, Elsevier

    Dr Jundika Candra Kurnia

  67. Numerical investigation of laminar mass transport enhancement in heterogeneous gaseous microreactors

    Article • Chemical Engineering and Processing - Process Intensification, April 2012, Elsevier

    Dr Jundika Candra Kurnia

  68. A PHENOMENOLOGICAL MODEL FOR HYDROGELS WITH RIGID SKIN FORMATION

    Article • International Journal of Applied Mechanics, March 2012, World Scientific Pub Co Pte Lt

    Dr Jundika Candra Kurnia

  69. Analysis of a model for pH-sensitive hydrogels

    Article • Polymer, January 2012, Elsevier

    Dr Jundika Candra Kurnia

  70. Laminar convective heat transfer for in-plane spiral coils of noncircular cross sections ducts: A computational fluid dynamics study

    Article • Thermal Science, January 2012, National Library of Serbia

    Dr Jundika Candra Kurnia

  71. Computational Study of pH-sensitive Hydrogel-based Microfluidic Flow Controllers

    Article • Journal of Functional Biomaterials, August 2011, MDPI AG

    Dr Jundika Candra Kurnia

  72. Numerical Evaluation of Transport Phenomena in a T-junction Microreactor with Coils of Different Configurations

    Article • Industrial & Engineering Chemistry Research, June 2011, American Chemical Society (ACS)

    Dr Jundika Candra Kurnia

  73. PHENOMENOLOGICAL MODEL FOR COUPLED ALCOHOL AND TEMPERATURE SENSITIVE HYDROGELS

    Article • International Journal of Applied Mechanics, June 2011, World Scientific Pub Co Pte Lt

    Dr Jundika Candra Kurnia

  74. Numerical evaluation of laminar heat transfer enhancement in nanofluid flow in coiled square tubes

    Article • Nanoscale Research Letters, May 2011, Springer Science + Business Media

    Dr Jundika Candra Kurnia

  75. Numerical investigation of laminar heat transfer performance of various cooling channel designs

    Article • Applied Thermal Engineering, May 2011, Elsevier

    Dr Jundika Candra Kurnia

  76. Evaluation of the heat transfer performance of helical coils of non-circular tubes

    Article • Journal of Zhejiang University SCIENCE A, January 2011, Journal of Zhejiang University SCIENCE

    Dr Jundika Candra Kurnia

  77. Numerical Evaluation of Heat Transfer Performance of Helical Coils of Non-Circular Tubes

    Article • January 2010, Research Publishing Services

    Dr Jundika Candra Kurnia

  78. Study of Thermosensitive Hydrogels for Microfluidic Flow Control

    Article • ECS Meeting Abstracts, July 2009, The Electrochemical Society

    Dr Jundika Candra Kurnia

  79. Mathematical Modeling of Hydrogels for Microfluidic Flow Control

    Article • Advanced Materials Research, June 2009, Trans Tech Publications

    Dr Jundika Candra Kurnia