All Stories

  1. Effect of annealing temperature on the microstructure and mechanical properties of an as-rolled Mg-9wt.%Li-3wt.%Al-1wt.%Zn alloy sheet

    Article • Frontiers of Materials Science, July 2014, Springer Science + Business Media

    Professor Jun-Yen Uan

  2. Converting waste magnesium scrap into anion-sorptionable nanomaterials: synthesis and characterization of an Mg–Al–Cl hydrotalcite-like compound by hydrolysis and chemical conversion treatment in aqueous chloride solutions

    Article • RSC Advances, January 2014, Royal Society of Chemistry

    Professor Jun-Yen Uan

  3. Preparation of a novel Pd/layered double hydroxide composite membrane for hydrogen filtration and characterization by thermal cycling

    Article • International Journal of Hydrogen Energy, October 2013, Elsevier

    Professor Jun-Yen Uan

  4. Production of an Mg/Mg2Ni lamellar composite for generating H2 and the recycling of the post-H2 generation residue to nickel powder

    Article • International Journal of Hydrogen Energy, October 2013, Elsevier

    Professor Jun-Yen Uan

  5. Optically transparent Li–Al–CO3 layered double hydroxide thin films on an AZ31 Mg alloy formed by electrochemical deposition and their corrosion resistance in a dilute chloride environment

    Article • Corrosion Science, March 2013, Elsevier

    Professor Jun-Yen Uan

  6. Aqueous Li+/Al3+ alkaline solution for CO2 capture and the massive Li–Al–CO3 hydrotalcite precipitation during the interaction between CO2 gas and the Li+/Al3+ aqueous solution

    Article • Journal of Materials Chemistry A, January 2013, Royal Society of Chemistry

    Professor Jun-Yen Uan

  7. Fabrication of AlLi and Al2Li3/Al4Li9 intermetallic compounds by molten salt electrolysis and their application for hydrogen generation from water

    Article • International Journal of Hydrogen Energy, September 2012, Elsevier

    Professor Jun-Yen Uan

  8. Solution-processed Li–Al layered-double-hydroxide platelet structures for high efficiency InGaN light emitting diodes

    Article • Optics Express, August 2012, Optical Society of America (OSA)

    Professor Jun-Yen Uan

  9. Tensile strength and deformation microstructure of Al–Mg–Si alloy sheet by through-width vibration rolling process

    Article • Materials Science and Engineering A, August 2012, Elsevier

    Professor Jun-Yen Uan

  10. Surface modification of 5083 Al alloy by electrical discharge alloying processing with a 75mass% Si–Fe alloy electrode

    Article • Applied Surface Science, March 2012, Elsevier

    Professor Jun-Yen Uan

  11. Effects of concentrations of NaCl and organic acid on generation of hydrogen from magnesium metal scrap

    Article • International Journal of Hydrogen Energy, February 2012, Elsevier

    Professor Jun-Yen Uan

  12. Microstructural and Corrosion Characteristics of Alloying Modified Layer on 5083 Al Alloy by Electrical Discharge Alloying Process with Pure Silicon Electrode

    Article • MATERIALS TRANSACTIONS, January 2012, Japan Institute of Metals

    Professor Jun-Yen Uan

  13. Crystallization of a chemical conversion layer that forms on AZ91D magnesium alloy in carbonic acid

    Article • Corrosion Science, November 2011, Elsevier

    Professor Jun-Yen Uan

  14. Rapid direct growth of Li–Al layered double hydroxide (LDH) film on glass, silicon wafer and carbon cloth and characterization of LDH film on substrates

    Article • Journal of Materials Chemistry, January 2011, Royal Society of Chemistry

    Professor Jun-Yen Uan

  15. Direct growth of oriented Mg–Fe layered double hydroxide (LDH) on pure Mg substrates and in vitro corrosion and cell adhesion testing of LDH-coated Mg samples

    Article • Journal of Materials Chemistry, January 2011, Royal Society of Chemistry

    Professor Jun-Yen Uan

  16. Microstructural and Corrosion Characteristics of Iron-Silicon Alloyed Layer on 5083 Al Alloy by Electrical Discharge Alloying Processing

    Article • MATERIALS TRANSACTIONS, January 2011, Japan Institute of Metals

    Professor Jun-Yen Uan

  17. Surface coatings for improving the corrosion resistance and cell adhesion of AZ91D magnesium alloy through environmentally clean methods

    Article • Thin Solid Films, October 2010, Elsevier

    Professor Jun-Yen Uan

  18. Applications of carbonic acid solution for developing conversion coatings on Mg alloy

    Article • Transactions of Nonferrous Metals Society of China, July 2010, Elsevier

    Professor Jun-Yen Uan

  19. Enhancement of corrosion resistance of Mg-9 wt.% Al-1 wt.% Zn alloy by a calcite (CaCO3) conversion hard coating

    Article • Corrosion Science, May 2010, Elsevier

    Professor Jun-Yen Uan

  20. Synthesis of Li–Al-carbonate layered double hydroxide in a metal salt-free system

    Article • Journal of Materials Chemistry, January 2010, Royal Society of Chemistry

    Professor Jun-Yen Uan

  21. Direct growth of oriented Mg–Al layered double hydroxide film on Mg alloy in aqueous HCO3−/CO32−solution

    Article • Journal of Materials Chemistry, January 2010, Royal Society of Chemistry

    Professor Jun-Yen Uan

  22. Electrochemical behaviour and corrosion performance of Mg–Li–Al–Zn anodes with high Al composition

    Article • Corrosion Science, October 2009, Elsevier

    Professor Jun-Yen Uan

  23. Evolution of hydrogen from magnesium alloy scraps in citric acid-added seawater without catalyst

    Article • International Journal of Hydrogen Energy, August 2009, Elsevier

    Professor Jun-Yen Uan

  24. Formation of Mg,Al-hydrotalcite conversion coating on Mg alloy in aqueous HCO3−/CO32− and corresponding protection against corrosion by the coating

    Article • Corrosion Science, May 2009, Elsevier

    Professor Jun-Yen Uan

  25. Producing hydrogen in an aqueous NaCl solution by the hydrolysis of metallic couples of low-grade magnesium scrap and noble metal net

    Article • International Journal of Hydrogen Energy, February 2009, Elsevier

    Professor Jun-Yen Uan

  26. Preparation of bcc Mg-Li-Al-Zn Alloy by Electrolysis in Molten Salt LiCl-KCl and the Alloy's Electrochemical Performance as Anode Material for Magnesium Batteries

    Article • Electrochemistry, January 2009, The Electrochemical Society of Japan

    Professor Jun-Yen Uan

  27. Morphological and Microstructural Characterization of the Aragonitic CaCO3/Mg,Al-Hydrotalcite Coating on Mg-9 Wt Pct Al-1 Wt Pct Zn Alloy to Protect against Corrosion

    Article • Metallurgical and Materials Transactions A, October 2008, Springer Science + Business Media

    Professor Jun-Yen Uan

  28. Ductile-to-brittle transition for the aluminum alloy contacting to liquid gallium metal

    Article • Journal of Alloys and Compounds, September 2008, Elsevier

    Professor Jun-Yen Uan

  29. Characterization and Improvement in the Corrosion Performance of a Hot-Chamber Diecast Mg Alloy Thin Plate by the Removal of Interdendritic Phases at the Die Chill Layer

    Article • Metallurgical and Materials Transactions A, January 2008, Springer Science + Business Media

    Professor Jun-Yen Uan

  30. Generation of hydrogen from magnesium alloy scraps catalyzed by platinum-coated titanium net in NaCl aqueous solution

    Article • International Journal of Hydrogen Energy, September 2007, Elsevier

    Professor Jun-Yen Uan

  31. Characterization of Mg,Al-hydrotalcite conversion film on Mg alloy and Cl− and CO32- anion-exchangeability of the film in a corrosive environment

    Article • Scripta Materialia, June 2007, Elsevier

    Professor Jun-Yen Uan

  32. Converting hcp Mg–Al–Zn alloy into bcc Mg–Li–Al–Zn alloy by electrolytic deposition and diffusion of reduced lithium atoms in a molten salt electrolyte LiCl–KCl

    Article • Scripta Materialia, April 2007, Elsevier

    Professor Jun-Yen Uan

  33. Uniform Equiaxed Grain Structure throughout Thickness of a Hot-Rolled 5083 Al-Mg-Mn Alloy Thick Plate after a Tempering Treatment at 350°C

    Article • MATERIALS TRANSACTIONS, January 2007, Japan Institute of Metals

    Professor Jun-Yen Uan

  34. Gallium-induced magnesium enrichment on grain boundary and the gallium effect on degradation of tensile properties of aluminum alloys

    Article • Metallurgical and Materials Transactions A, July 2006, Springer Science + Business Media

    Professor Jun-Yen Uan

  35. Sacrificial Mg film anode for cathodic protection of die cast Mg–9wt.%Al–1wt.%Zn alloy in NaCl aqueous solution

    Article • Scripta Materialia, April 2006, Elsevier

    Professor Jun-Yen Uan

  36. Precipitate evolution in underaged Al–Mg–Si alloy during thermal cycling between 25°C and 65°C

    Article • Materials Science and Engineering A, March 2006, Elsevier

    Professor Jun-Yen Uan

  37. Effect of Cooling Rate on Mg17Al12 Volume Fraction and Compositional Inhomogeneity in a Sand-Cast AZ91D Magnesium Plate

    Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

    Professor Jun-Yen Uan

  38. Correlating the microstructure of the die-chill skin and the corrosion properties for a hot-chamber die-cast AZ91D magnesium alloy

    Article • Metallurgical and Materials Transactions A, August 2005, Springer Science + Business Media

    Professor Jun-Yen Uan

  39. Surface compositional inhomogeneity and subsurface microstructures in a thin-walled AZ91D plate formed by hot-chamber die casting

    Article • Materials Science and Engineering A, August 2005, Elsevier

    Professor Jun-Yen Uan

  40. Preparation of Mg–Li–Al–Zn Master Alloy in Air by Electrolytic Diffusing Method

    Article • MATERIALS TRANSACTIONS, January 2005, Japan Institute of Metals

    Professor Jun-Yen Uan

  41. Evaluation of a New Hydrogen Generating System: Ni-Rich Magnesium Alloy Catalyzed by Platinum Wire in Sodium Chloride Solution

    Article • MATERIALS TRANSACTIONS, January 2005, Japan Institute of Metals

    Professor Jun-Yen Uan

  42. Characterization of Gallium-induced Intergranular Fracture Surface and the Auger Electron Spectroscopic Analysis for Mg Grain Boundary Segregation in AA6061 T4 Al-Mg-Si Alloy

    Article • MATERIALS TRANSACTIONS, January 2004, Japan Institute of Metals

    Professor Jun-Yen Uan

  43. Examination on the aging and tensile properties of Al-Zn-Mg/Al3Ni eutectic composite

    Article • Metallurgical and Materials Transactions A, March 2002, Springer Science + Business Media

    Professor Jun-Yen Uan

  44. Microstructural evolution in the superplastic-like deformation of Al-Al3Ni eutectic alloy with [111] fiber texture

    Article • Metallurgical and Materials Transactions A, March 2001, Springer Science + Business Media

    Professor Jun-Yen Uan

  45. On the extrusion microstructural evolution of Al–Al3Ni in situ composite

    Article • Acta Materialia, January 2001, Elsevier

    Professor Jun-Yen Uan

  46. Influence of calcium addition on the superplastic-like behavior of extruded Al-Al3Ni eutectic alloy

    Article • Metallurgical and Materials Transactions A, August 1999, Springer Science + Business Media

    Professor Jun-Yen Uan

  47. A study of the texture hardening of pure aluminum and AlAl33Ni eutectic alloy with [111] fiber texture

    Article • Scripta Materialia, June 1997, Elsevier

    Professor Jun-Yen Uan

  48. Plastic inhomogeneity and easy glide of aluminum and AlAl3Ni eutectic alloy with [111] fiber texture

    Article • Acta Materialia, February 1997, Elsevier

    Professor Jun-Yen Uan

  49. A study on the subgrain superplasticity of extruded Al-Al3Ni eutectic alloy

    Article • Metallurgical and Materials Transactions A, February 1997, Springer Science + Business Media

    Professor Jun-Yen Uan

  50. Superplasticity-like behavior of Al-Al3Ni eutectic alloy

    Article • Materials Chemistry and Physics, March 1996, Elsevier

    Professor Jun-Yen Uan