All Stories

  1. Anemometric Field Measurements and Surface Mapping for Enhanced Ventilation Network Assessments
  2. From waste to solution: Valorisation of a dolomite by-product for degraded soil rehabilitation
  3. Longitudinal Calculation of Water Poverty Index in the Middle East: Potential to Expedite Progress
  4. Phytoremediation strategies for the reclamation of tailings and mining soils in an active open-pit site
  5. A Comprehensive Action Plan Towards Sustainability in Small-Scale Gold Mining in Northeastern Antioquia, Colombia
  6. Proposal of a Method for Calculating the Bond Work Index for Samples with Non-Standard Feed Particle Size Distribution
  7. Utilisation of Zinc Processing Tailings (ZPTs) in Fired Clay Bricks Manufacturing: Case Study
  8. Enhanced remediation of organotin compounds and metal(loid)s in polluted sediments: Chemical stabilization with mining-wastes and nZVI versus physical soil washing
  9. Potential of using zinc processing tailings (ZPT's) in the production of burnt clay bricks
  10. Methods for Estimating the Bond Work Index for Ball Mills
  11. Generalized mathematical model applied to a silica sand laboratory-controlled mill: Derivation of simplified ceramic ball entrance flux, ball wear consumption, and mass distribution functions
  12. Evaluation of Socioeconomic Dynamics and Their Impact on Life Expectancy in Coal Mining Communities in Colombia
  13. Water Poverty Index over the Past Two Decades: A Comprehensive Review and Future Prospects—The Middle East as a Case Study
  14. Editorial for Special Issue “Envisioning the Future of Mining”
  15. Alkaline Leaching for Arsenic Removal in Gold-Bearing Ore from Miraflores Mine, El Oro, Ecuador
  16. Magnetic separation for arsenic and metal recovery from polluted sediments within a circular economy
  17. Nanoscale zero-valent iron mitigates arsenic mobilization and accumulation in Sinapis alba grown on a metal(loid)-polluted soil treated with a dunite mining waste-compost amendment
  18. Wet High Intensity Magnetic Separation (WHIMS) of Algerian Kaolin: a Potential Application
  19. Recycling of Waste Toner Powder as Adsorbent to Remove Aqueous Heavy Metals
  20. Grinding and Concentration Technology of Critical Metals
  21. Study of Comminution Kinetics in an Electrofragmentation Lab-Scale Device
  22. Study of steel ball recharge and consumption in a wet cement industrial mill via a population balance model
  23. Variability of the Ball Mill Bond’s Standard Test in a Ta Ore Due to the Lack of Standardization
  24. Particle Size Distribution Models for Metallurgical Coke Grinding Products
  25. Study on alumina ball size distribution in white cement grinding
  26. A Review of Alternative Procedures to the Bond Ball Mill Standard Grindability Test
  27. Unveiling the Link between the Third Law of Comminution and the Grinding Kinetics Behaviour of Several Ores
  28. Variability Study of Bond Work Index and Grindability Index on Various Critical Metal Ores
  29. A Comparative Study of Energy Efficiency in Tumbling Mills with the Use of Relo Grinding Media
  30. As sorption onto Fe-based nanoparticles and recovery from soils by means of wet high intensity magnetic separation
  31. Characterization, Classification, Dry High-Intensity Magnetic Separation (DHIMS), and Re-Grinding Techniques to Improve the Mineral Performance of a Sn-Ta-Nb Mineral Concentrate
  32. A Comparative Study of Mining Control in Latin America
  33. Grinding Kinetics Study of Tungsten Ore
  34. Kinetics of Dry-Batch Grinding in a Laboratory-Scale Ball Mill of Sn–Ta–Nb Minerals from the Penouta Mine (Spain)
  35. Application of the Cumulative Kinetic Model in the Comminution of Critical Metal Ores
  36. A multi-faceted, environmental forensic characterization of a paradigmatic brownfield polluted by hazardous waste containing Hg, As, PAHs and dioxins
  37. Application of dry high-intensity magnetic separation in upgrading low-grade iron ore of Rouina deposit, Algeria
  38. A Study of the Effect of Medium Viscosity on Breakage Parameters for Wet Grinding
  39. Use of the Swebrec Function to Model Particle Size Distribution in an Industrial-Scale Ni-Co Ore Grinding Circuit
  40. Reuse of Dunite Mining Waste and Subproducts for the Stabilization of Metal(oid)s in Polluted Soils
  41. Recycled Mineral Raw Materials from Quarry Waste Using Hydrocyclones
  42. Fractal analysis of CO2 and N2 adsorption data to assess textural changes during char gasification
  43. Comparison of alumina ball size distribution in two white cement grinding units using Swebrec function
  44. A Multi-Index Analysis Approach to Heavy Metal Pollution Assessment in River Sediments in the Ponce Enríquez Area, Ecuador
  45. Mineral Processing Technologies for the Remediation of Soils Polluted by Trace Elements
  46. Nanoscale zero-valent iron-assisted soil washing for the removal of potentially toxic elements
  47. Frequency domain characterization of torque in tumbling ball mills using DEM modelling: Application to filling level monitoring
  48. Modeling of the Specific Breakage Rate Based on the Viscosity for Wet Grinding
  49. Erratum to: Particle size distribution fitting of surface detrital sediment using the Swrebec function
  50. Heat generation model in the ball-milling process of a tantalum ore
  51. Soil washing optimization by means of attributive analysis: Case study for the removal of potentially toxic elements from soil contaminated with pyrite ash
  52. Product size distribution function influence on interpolation calculations in the Bond ball mill grindability test
  53. GEOSTATISTICAL APPROACH TO THE 3D-DISTRIBUTION OF HAZARDOUS WASTE AND POLLUTED SOIL IN A BROWNFIELD
  54. Environmental study of gold mining tailings in the Ponce Enriquez mining area (Ecuador)
  55. Comprehensive waste characterization and organic pollution co-occurrence in a Hg and As mining and metallurgy brownfield
  56. Energy efficiency in the zeolite impact crushing plant of San Andrés (Holguín, Cuba)
  57. Particle size distribution fitting of surface detrital sediment using the Swrebec function
  58. Ceramic ball wear prediction in tumbling mills as a grinding media selection tool
  59. Tannins: the organic depressants alternative in selective flotation of sulfides
  60. Fine grinding size distribution analysis using the Swrebec function
  61. CO2 activation of chars: Effect of burn-off on texture and fractal properties
  62. High intensity magnetic separation for the clean-up of a site polluted by lead metallurgy
  63. Recuperación de iones cobre por flotación con amilxantato de potasio
  64. Feasibility study on the use of soil washing to remediate the As–Hg contamination at an ancient mining and metallurgy area
  65. Toward determining the behavior of fragmentation functions during the impact crushing of minerals
  66. Transient state analysis by simulation in a closed grinding circuit
  67. Analysis of soil washing effectiveness to remediate a brownfield polluted with pyrite ashes
  68. The preg-robbing of gold and silver by clays during cyanidation under agitation and heap leaching conditions
  69. Study of the resistance to simple compression from adobe produced with various soils from rescencio valdés, Villa Clara, Cuba
  70. Grindability of lateritic nickel ores in Cuba
  71. Implementation of energy sustainability concepts during the comminution process of the Punta Gorda nickel ore plant (Cuba)
  72. Process models for simulation of Bond tests
  73. Environmental engineering in mining engineering education
  74. Determination of work index in a common laboratory mill
  75. Estudio del comportamiento de las colas de una planta de beneficio de mineral de fluorita frente a procesos floculación-coagulación