All Stories

  1. Evaluation of torque output for twisted blade Savonius turbine using several turbulence models
  2. Numerical Investigation of Wet Steam Condensation in Low-Pressure Turbine Blades
  3. Integrating Solar Energy into Fossil Fuel Power Plant with CO2 Capture and Storage: A Bibliographic Survey
  4. Influence of Superhydrophobic Coatings on Turbulence and Vortical Structures in a Submerged Impinging Jet
  5. Influence of profile geometry on the self-starting capability of an H-Darrieus turbine
  6. Mechanical analysis of fiber-reinforced composite running-specific prosthesis using a matrix of TPU or PLA
  7. Design and construction of a uniaxial accelerometer by using SMS fiber
  8. ENHANCED FILM COOLING EFFECTIVENESS USING TURBULENCE PROMOTER IN COOLING HOLE
  9. Analysis of Gas Turbine Combustor Exhaust Emissions: Effects of Transient Inlet Air Pressure
  10. Corrosion Fatigue Analysis in Power Steam Turbine Blade
  11. Instabilities of Flow and Temperature Distribution in Can Combustor Due to Perturbed Pressure of Air Inlet
  12. Application of CFD to the Design of Manifolds Employed in the Thermodynamic Method to Obtain Efficiency in a Hydraulic Turbine
  13. Analytical method for determining maximum shear stresses in laminated composite metal bars subjected to torsion
  14. Enhanced thermal efficiency organic Rankine cycle for renewable power generation
  15. Reduction of Stresses and Mass of an Engine Rubber Mount Subject to Mechanical Vibrations
  16. Shape effect of thickness of the NREL S815 profile on the performance of the H-rotor Darrieus turbine
  17. Effect of Thermal Barrier Coating on the Thermal Stress of Gas Microturbine Blades and Nozzles
  18. Reconstruction methodology of a Francis runner blade using numerical tools
  19. Evaluating CO₂ Corrosion in Steel Using Rotating Cage and CFD Modeling
  20. Fatigue of steam turbine blades at resonance conditions
  21. Radial Inflow Turbine Geometry Generation Method Using Third Order Bezier Curves for Blade Design
  22. Detection of damage in steam turbine blades caused by low cycle and strain cycling fatigue
  23. NEW METHODOLOGY FOR THE ANALYSIS OF MECHANICAL SYSTEMS USING SCALE MODELS AND SIMILARITY LAWS
  24. Experimental measurements of the flow field around a film-cooled blade leading edge using particle image velocimetry
  25. Prediction of Film Cooling Effectiveness on a Gas Turbine Blade Leading Edge Using ANN and CFD
  26. Film cooling optimization on leading edge gas turbine blade using differential evolution
  27. Small Organic Rankine Cycle Coupled to Parabolic Trough Solar Concentrator
  28. Experimental data and numerical predictions of a single-phase flow in a batch square stirred tank reactor with a rotating cylinder agitator
  29. VARIACIÓN DE LA POTENCIA EN UNA MICROTURBINA HIDRÁULICA DE FLUJO AXIAL CON RESPECTO AL NÚMERO DE ÁLABES
  30. Effect of Rotor Diameter on the Thermal Stresses of a Turbine Rotor Model
  31. Effect of the Modification of the Start-Up Sequence on the Thermal Stresses for a Microgas Turbine
  32. Computational fluid dynamics simulation and geometric design of hydraulic turbine draft tube
  33. Failure probability estimation of steam turbine blades by enhanced Monte Carlo Method
  34. Improvement of the performance of an absorption heat transformer through a single effect process to obtain freshwater
  35. Parametric Study of Showerhead Film Cooling Performance on a Gas Turbine Blade
  36. Failure analysis of a hydraulic Kaplan turbine shaft
  37. Failure Analysis to Blades of Steam Turbines at Normal Conditions of Operations and Resonance
  38. The use of artificial neural network (ANN) for modeling the useful life of the failure assessment in blades of steam turbines
  39. Fiber Optic Pressure Sensor of 0–0.36 psi by Multimode Interference Technique
  40. Numerical Simulation of Mixed Convection in a Rotating Cylindrical Cavity: Influence of Prandtl Number
  41. Instabilities on Nozzle-Wake Loads due to Axial Clearance and Throat Variations in a First Stage Turbine
  42. Vibration failure in admission pipe of a steam turbine due to flow instability
  43. Optical characterization of LiBr-H 2 O using MMI in optical fiber
  44. Reliability Assessment and Useful Life of Turbine Blades Using Probabilistic Methods
  45. Failure analysis of the 350MW steam turbine blade root
  46. Failure analysis of steam turbine last stage blade tenon and shroud
  47. Numerical Analysis of Crack Propagation and Life Estimation of Curtis Stage Blade of a Steam Turbine
  48. Numerical Analysis of the Blade Forces Caused by Wake/Blade Interaction in the Last Stage of a Steam Turbine
  49. Evaluation of the Last Stage Blades of 37.5 and 110 MW Geothermal Turbines
  50. Numerical Analysis of Unstable Flow in Last-Stage Blades of Steam Turbines
  51. Failure of last-stage turbine blades in a geothermal power plant
  52. Air Flow Turbulent Fluctuations in a Centrifugal Fan
  53. Rotating Effects on Heat Transfer Rate in a Cooling Air Passage of a Gas Turbine Blade