All Stories

  1. Metal injection moulding (MIM) as an alternative fabrication process for the production of TWIP steel

    Article • Powder Metallurgy, May 2019, Taylor & Francis

    Professor Jose-Maria Cabrera

  2. Grain growth behaviour of an AISI 422 martensitic stainless steel after hot deformation process

    Article • Canadian Metallurgical Quarterly, April 2018, Taylor & Francis

    Professor Jose-Maria Cabrera

  3. Deformation Heterogeneity Study of a 6061-T6 Aluminum Alloy Processed by Equal Channel Angular Pressing

    Article • Materials Science Forum, August 2017, Trans Tech Publications

    Professor Jose-Maria Cabrera

  4. Dislocation study of ARMCO iron processed by ECAP

    Article • MRS Proceedings, January 2016, Cambridge University Press

    Professor Jose-Maria Cabrera

  5. Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe–21Mn–1.3Al–1.5Si–0.5C TWIP steel

    Article • Materials Science and Engineering A, October 2014, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  6. Alternative methods to attach components in printed circuit boards to improve their recyclability

    Article • DYNA, August 2014, Universidad Nacional de Colombia

    Professor Jose-Maria Cabrera

  7. Strain hardening behavior of ARMCO iron processed by ECAP

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Professor Jose-Maria Cabrera

  8. Influence of composition, grain size, and oxide particles on the strength of consolidated ball-milled iron

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Professor Jose-Maria Cabrera

  9. Hot ductility behavior of high-Mn austenitic Fe–22Mn–1.5Al–1.5Si–0.45C TWIP steels microalloyed with Ti and V

    Article • Materials Science and Engineering A, August 2014, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  10. Texture and fatigue behavior of ultrafine grained copper produced by ECAP

    Article • Materials Science and Engineering A, July 2014, Elsevier

    Professor Jose-Maria Cabrera

  11. Modeling of the hot flow behavior of advanced ultra-high strength steels (A-UHSS) microalloyed with boron

    Article • Materials Science and Engineering A, July 2014, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  12. Analysis of Recrystallization and Strain-Induced Precipitation on High Nb- and N-Bearing Austenitic Stainless Steel

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Professor Jose-Maria Cabrera, Prof Juno Gallego

  13. ZK60 alloy processed by ECAP: Microstructural, physical and mechanical characterization

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Professor Jose-Maria Cabrera

  14. Microstructure influencing physical and mechanical properties of electrolytic tough pitch copper produced by equal channel angular pressing

    Article • Mechanics of Materials, December 2013, Elsevier

    Professor Jose-Maria Cabrera

  15. Printed circuit boards: A review on the perspective of sustainability

    Article • Journal of Environmental Management, December 2013, Elsevier

    Professor Jose-Maria Cabrera

  16. A review of the recycling of non-metallic fractions of printed circuit boards

    Article • SpringerPlus, October 2013, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  17. Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: Influence of strain rate and temperature

    Article • Materials Science and Engineering A, October 2013, Elsevier

    Professor Jose-Maria Cabrera

  18. Effect of Boron on the Hot Ductility Behavior of a Low Carbon Advanced Ultra-High Strength Steel (A-UHSS)

    Article • Metallurgical and Materials Transactions A, July 2013, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  19. Mechanical, microstructural and electrical evolution of commercially pure copper processed by equal channel angular extrusion

    Article • Materials Science and Engineering A, June 2013, Elsevier

    Professor Jose-Maria Cabrera

  20. Microstructural and Calorimetric Analysis of ZK60 Alloy Processed by ECAP

    Article • Advanced Materials Research, April 2013, Trans Tech Publications

    Professor Jose-Maria Cabrera

  21. Hot deformation activation energy (QHW) of austenitic Fe–22Mn–1.5Al–1.5Si–0.4C TWIP steels microalloyed with Nb, V, and Ti

    Article • Materials Science and Engineering A, February 2013, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  22. Effect of microalloying elements (Nb, V and Ti) on the hot flow behavior of high-Mn austenitic twinning induced plasticity (TWIP) steel

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  23. Effect of V on Hot Deformation Characteristics of TWIP Steels

    Article • steel research international, March 2012, Wiley

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  24. EBSD study of a hot deformed austenitic stainless steel

    Article • Materials Science and Engineering A, March 2012, Elsevier

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  25. Prediction of hot flow curves of construction steels by physically-based constitutive equations

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  26. Effect of boron on the continuous cooling transformation kinetics in a low carbon advanced ultra-high strength steel (A-UHSS)

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  27. Dynamically recrystallized austenitic grain in a low carbon advanced ultra-high strength steel (A-UHSS) microalloyed with boron under hot deformation conditions

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  28. Characterization of Precipitation Kinetics of Inconel 718 Superalloy by the Stress Relaxation Technique

    Article • Materials Science Forum, January 2012, Trans Tech Publications

    Professor Jose-Maria Cabrera

  29. Mechanical properties and microstructure of low carbon ultra-high strength steels (UHSS) microalloyed with boron

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  30. Effect of Microalloying Elements (B, Nb, V and Ti) on the Strain Hardening Behavior of High-Manganese TWIP Steels.

    Article • MRS Proceedings, January 2012, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  31. On the Onset of Dynamic Recrystallization in Steels

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Professor Jose-Maria Cabrera

  32. Constitutive relationships for hot deformation of austenite

    Article • Acta Materialia, September 2011, Elsevier

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  33. Modeling and Prediction of Hot Deformation Flow Curves

    Article • Metallurgical and Materials Transactions A, July 2011, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  34. Hot ductility behavior of a low carbon advanced high strength steel (AHSS) microalloyed with boron

    Article • Materials Science and Engineering A, May 2011, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  35. Determination of the critical conditions for the initiation of dynamic recrystallization in boron microalloyed steels

    Article • Materials Science and Engineering A, May 2011, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  36. Hot deformation behavior of a medium carbon microalloyed steel

    Article • Materials Science and Engineering A, April 2011, Elsevier

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  37. Shear banding phenomenon during severe plastic deformation of an AZ31 magnesium alloy

    Article • Journal of Alloys and Compounds, March 2011, Elsevier

    Professor Jose-Maria Cabrera

  38. Thermal Stability and Microstructural Behavior of ECAP Processed Copper

    Article • January 2011, American Institute of Physics

    Professor Jose-Maria Cabrera

  39. Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy Processed by Accumulative Back Extrusion (ABE)

    Article • Materials Science Forum, December 2010, Trans Tech Publications

    Professor Jose-Maria Cabrera

  40. Enhancing Ductility of ECAP Processed Metals

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Jose-Maria Cabrera

  41. Tensile and compressive test in nanocrystalline and ultrafine carbon steel

    Article • Journal of Materials Science, May 2010, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  42. Thermal stability of ultrafine grains size of pure copper obtained by equal-channel angular pressing

    Article • Journal of Materials Science, January 2010, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  43. Hot Deformation and Ductility Analysis of Continuous Cast C40 Steel by Means of Tensile and Compression Tests

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Jose-Maria Cabrera

  44. Laser assisted conical spin forming of dual phase automotive steel. Experimental demonstration of work hardening reduction and forming limit extension

    Article • Physics Procedia, January 2010, Elsevier

    Professor Jose-Maria Cabrera

  45. Influence of Manganese on the Hot Working Behaviour of Construction Steels

    Article • Advanced Materials Research, January 2010, Trans Tech Publications

    Professor Jose-Maria Cabrera

  46. Analysis of Hot Tensile and Compression Curves to Assess the Hot Ductility of C-Mn Steels

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Professor Jose-Maria Cabrera

  47. Ductility of Bulk Nanocrystalline and Ultrafine Grain Iron and Steel

    Article • Materials Science Forum, November 2009, Trans Tech Publications

    Professor Jose-Maria Cabrera

  48. Hot deformation behavior of low carbon advanced high strength steel (AHSS) microalloyed with boron

    Article • MRS Proceedings, January 2009, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  49. Modeling of the hot deformation behavior of boron microalloyed steels under uniaxial hot-compression conditions

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), December 2008, Carl Hanser Verlag

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  50. Microstructural evolution and mechanical response of nanocrystalline and ultrafine-grained steel obtained by mechanical milling

    Article • Materials Science and Engineering A, October 2008, Elsevier

    Professor Jose-Maria Cabrera

  51. Influence of the carbon content on the strain rate sensitivity of nanocrystalline steels

    Article • Scripta Materialia, September 2008, Elsevier

    Professor Jose-Maria Cabrera

  52. Role of Cu2O during hot compression of 99.9% pure copper

    Article • Materials Science and Engineering A, August 2008, Elsevier

    Professor Jose-Maria Cabrera

  53. Strain rate sensitivity of nanocrystalline and ultrafine-grained steel obtained by mechanical attrition

    Article • Materials Science and Engineering A, June 2008, Elsevier

    Professor Jose-Maria Cabrera

  54. Grain Refinement of Pure Copper by ECAP

    Article • Materials Science Forum, June 2008, Trans Tech Publications

    Professor Jose-Maria Cabrera

  55. Study of the Plastic Deformation in Nanocrystalline and Ultrafine Iron and Carbon Steels

    Article • Materials Science Forum, June 2008, Trans Tech Publications

    Professor Jose-Maria Cabrera

  56. Hot flow behavior of boron microalloyed steels

    Article • Materials Science and Engineering A, May 2008, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  57. Effect of initial microstructure, frequency and temperature on the low cycle fatigue behaviour of the soldering alloys 96.5Sn–3.5Ag and 63Sn–37Pb

    Article • Engineering Failure Analysis, April 2008, Elsevier

    Professor Jose-Maria Cabrera

  58. Plastic deformation of a nanostructured and ultra-fine grained Fe-1%Cr with a bimodal grain size distribution

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  59. Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion

    Article • Materials Science and Engineering A, March 2008, Elsevier

    Professor Jose-Maria Cabrera

  60. Thixotropic Behaviour of a Cu – Eutectic Sn-Pb Slurry

    Article • November 2007, CrossRef Test Account

    Professor Jose-Maria Cabrera

  61. Thixotropic Behaviour of a Cu – Eutectic Sn-Pb Slurry

    Article • Materials Science Forum, November 2007, Trans Tech Publications

    Professor Jose-Maria Cabrera

  62. Effects of Precipitation during Dynamic Recrystallization of Copper with Different Oxygen Levels

    Article • October 2007, CrossRef Test Account

    Professor Jose-Maria Cabrera

  63. Effects of Precipitation during Dynamic Recrystallization of Copper with Different Oxygen Levels

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Jose-Maria Cabrera

  64. A Model for Multi Peak Dynamic Recrystallization in Copper

    Article • July 2007, CrossRef Test Account

    Professor Jose-Maria Cabrera

  65. A Model for Multi Peak Dynamic Recrystallization in Copper

    Article • Materials Science Forum, July 2007, Trans Tech Publications

    Professor Jose-Maria Cabrera

  66. Hot ductility behavior of boron microalloyed steels

    Article • Materials Science and Engineering A, July 2007, Elsevier

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  67. Effect of the thermal cycle on the hot ductility and fracture mechanisms of a C–Mn steel

    Article • Engineering Failure Analysis, March 2007, Elsevier

    Professor Jose-Maria Cabrera

  68. Evaluation of the Hot Ductility of a C–Mn Steel Produced from Scrap Recycling

    Article • ISIJ International, January 2007, Iron and Steel Institute of Japan

    Professor Jose-Maria Cabrera

  69. Mechanical response of nanocrystalline steel obtained by mechanical attrition

    Article • Journal of Materials Science, December 2006, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  70. High temperature deformation of Inconel 718

    Article • Journal of Materials Processing Technology, July 2006, Elsevier

    Professor Jose-Maria Cabrera

  71. Approach to the microstructural control of two medium carbon microalloyed steels under hot forming conditions

    Article • Revista de Metalurgia, April 2006, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  72. Microstructural Evolution of a Commercial 0.04%C Steel During Batch Annealing

    Article • March 2006, CrossRef Test Account

    Professor Jose-Maria Cabrera

  73. Microstructural Evolution of a Commercial 0.04%C Steel During Batch Annealing

    Article • Materials Science Forum, March 2006, Trans Tech Publications

    Professor Jose-Maria Cabrera

  74. Ductilidad en caliente y mecanismos de fractura de un acero de construcción

    Article • Revista de Metalurgia, February 2006, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  75. Study of the Nanometric Grain Size Distribution in Iron Compacts Obtained by Mechanical Milling

    Article • January 2006, CrossRef Test Account

    Professor Jose-Maria Cabrera

  76. Study of the Nanometric Grain Size Distribution in Iron Compacts Obtained by Mechanical Milling

    Article • Materials Science Forum, January 2006, Trans Tech Publications

    Professor Jose-Maria Cabrera

  77. Obtención de materiales con comportamiento tixotrópico mediante "compocasting"

    Article • Revista de Metalurgia, December 2005, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  78. Microstructural Evolution of Two Medium Carbon Microalloyed Steels during Hot Forging Process

    Article • November 2005, CrossRef Test Account

    Professor Jose-Maria Cabrera

  79. Microstructural Evolution of Two Medium Carbon Microalloyed Steels during Hot Forging Process

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Professor Jose-Maria Cabrera

  80. Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels

    Article • Acta Materialia, October 2005, Elsevier

    Professor Jose-Maria Cabrera

  81. Influence of carbon content on high temperature response of plain carbon steels

    Article • Ironmaking & Steelmaking, August 2005, Taylor & Francis

    Professor Jose-Maria Cabrera

  82. EBSD study of purity effects during hot working in austenitic stainless steels

    Article • Materials Science and Engineering A, February 2005, Elsevier

    Professor Jose-Maria Cabrera

  83. Predicting Multiple Peak Dynamic Recrystallization of Copper

    Article • Materials Science Forum, October 2004, Trans Tech Publications

    Professor Jose-Maria Cabrera

  84. Effect of clustering of precipitates on grain growth

    Article • Metallurgical and Materials Transactions A, March 2004, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  85. Effect of clustering of precipitates on grain growth

    Article • Metallurgical and Materials Transactions A, March 2004, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  86. Study of the Hot Ductility and Fracture Mechanisms of a Medium Carbon Steel

    Article • Materials Science Forum, December 2003, Trans Tech Publications

    Professor Jose-Maria Cabrera

  87. Modeling thermomechanical processing of austenite

    Article • Journal of Materials Processing Technology, December 2003, Elsevier

    Professor Jose-Maria Cabrera

  88. High Temperature Behavior of Eutectic Sn-Pb and Sn-Ag Soldering Alloys

    Article • Materials Science Forum, December 2003, Trans Tech Publications

    Professor Jose-Maria Cabrera

  89. Modeling the Hot Flow Stress of Commercial Purity Coppers with Different Oxygen Levels

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Professor Jose-Maria Cabrera

  90. Deformation Behaviour of 7075Al/SiCp Composite during Multi-Pass Deformation at High Temperatures

    Article • Materials Science Forum, August 2003, Trans Tech Publications

    Professor Jose-Maria Cabrera

  91. Effect of carbon content on plastic flow behaviour of plain carbon steels at elevated temperature

    Article • Materials Science and Technology, August 2003, Taylor & Francis

    Professor Jose-Maria Cabrera

  92. Hot working of two AISI 304 steels: a comparative study

    Article • Materials Science and Engineering A, February 2003, Elsevier

    Professor Jose-Maria Cabrera

  93. Effect of rare-earth metals on the hot strength of HSLA steels

    Article • Zeitschrift für Metallkunde, November 2002, Carl Hanser Verlag

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  94. Rare Earth Additions in a Ferritic Steel: A Mössbauer Study

    Article • January 2002, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Dr Ignacio Mejìa

  95. Mechanical Behaviour of Sn-Pb and Sn-Ag Soldering Alloys for Printed Circuit Boards of the Automotive Industry

    Article • October 2001, SAE International

    Professor Jose-Maria Cabrera

  96. Comportamiento termomecánico de aceros AISI 304

    Article • Revista de Metalurgia, April 2001, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  97. Modelización de la deformación en caliente de un cobre puro comercial

    Article • Revista de Metalurgia, April 2001, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  98. La recristalización dinámica durante la deformación en caliente de un acero calidad armco

    Article • Revista de Metalurgia, April 2001, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  99. Effect of the Chemical Composition on the Work Hardening and Dynamic Recovery of Some Metallic Alloys

    Article • April 2000, Wiley

    Professor Jose-Maria Cabrera

  100. Application of the EBSD Technique to the Study of Dynamic Recrystallization

    Article • April 2000, Wiley

    Professor Jose-Maria Cabrera

  101. Hot Flow Description of ARMCO Iron

    Article • April 2000, Wiley

    Professor Jose-Maria Cabrera

  102. Effect of strain on recrystallisation–precipitation interaction in low vanadium microalloyed steel

    Article • Materials Science and Technology, June 1999, Taylor & Francis

    Professor Jose-Maria Cabrera

  103. Effect of the Chemical Composition on the Peak and Steady Stresses of Plain Carbon and Microalloyed Steels Deformed under Hot Working Conditions

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Jose-Maria Cabrera

  104. Modelling the Hot Working of Simple Geometries Employing Physical-Based Constitutive Equations and the Finite Element Method

    Article • Materials Science Forum, June 1998, Trans Tech Publications

    Professor Jose-Maria Cabrera

  105. Ecuaciones constitutivas de la fluencia en caliente de aceros microaleados

    Article • Revista de Metalurgia, May 1998, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  106. Estudio de la interacción precipitación-recristalización de un acero microaleado al vanadio con 0,35 % C

    Article • Revista de Metalurgia, May 1998, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  107. Macro-Micro Modeling of the Dendritic Microstructure of Steel Billets Processed by Continuous Casting.

    Article • ISIJ International, January 1998, Iron and Steel Institute of Japan

    Professor Jose-Maria Cabrera

  108. Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditions

    Article • Metallurgical and Materials Transactions A, November 1997, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  109. Simulación de la fluencia en caliente de un acero microaleado con un contenido medio de carbono. III parte. Ecuaciones constitutivas

    Article • Revista de Metalurgia, August 1997, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  110. Simulación de la fluencia en caliente de un acero microaleado con un contenido medio de carbono. II parte. Recristalización dinámica: inicio y cinética

    Article • Revista de Metalurgia, June 1997, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  111. Aplicación de los mapas de procesado en la optimización de los parámetros de un proceso de conformado en caliente. II parte. Mapas de procesado de un acero microaleado con un contenido medio de carbono

    Article • Revista de Metalurgia, June 1997, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  112. Simulación de la fluencia en caliente de un acero microaleado con un contenido medio de carbono. I parte. Aproximación teórica

    Article • Revista de Metalurgia, April 1997, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  113. Flow behaviour of medium carbon microalloyed steel under hot working conditions

    Article • Materials Science and Technology, July 1996, Taylor & Francis

    Professor Jose-Maria Cabrera

  114. Characterization of the hot deformation in a microalloyed medium carbon steel using processing maps

    Article • Scripta Materialia, April 1996, Elsevier

    Professor Jose-Maria Cabrera

  115. Abnormal grain growth in a medium-carbon microalloyed steel

    Article • Journal of Materials Science, March 1996, Springer Science + Business Media

    Professor Jose-Maria Cabrera

  116. Influencia del nitruro de aluminio en el crecimiento anormal de grano de aceros microaleados

    Article • Revista de Metalurgia, February 1995, Departmento de Publicaciones del CSIC

    Professor Jose-Maria Cabrera

  117. Application of Recrystallization, Grain Growth and Precipitation to Model Hot Forging of Microalloyed Steels for Automotive Components

    Article • Materials Science Forum, January 1993, Trans Tech Publications

    Professor Jose-Maria Cabrera