All Stories

  1. Layer-engineered CrSeTe saturable absorbers for high-performance mode-locked fiber lasers at 1 μm and 1.5 μm
  2. Flat and Fabulous: Squeezing Elemental Metals into the 2D Realm
  3. Correlation of Energy-Band Structure and Slow-Saturable-Absorption Characteristics for 2D or Bulk TeSe2
  4. Carrier dynamics analysis of self-powered Sb2Se3 heterojunction photovoltaic detectors with a broad spectral response
  5. Two-Dimensional Metals Over, Inside, or Beneath Templates
  6. Boosting conversion efficiency by bandgap engineering of ecofriendly antimony trisulfide indoor photovoltaics via a modeling approach
  7. Monolayer water shepherding supertight MXene/graphene composite films
  8. Van Der Waals Vertical GaSe/MoS2 Heterojunctions for High-responsivity Photodetectors and Sensitive Photovoltaic Devices
  9. Modulating p-type doping of two dimensional material palladium diselenide
  10. Recent advances in technologies toward the development of 2D materials-based electronic noses
  11. Large-area growth of high-quality transition metal dichalcogenides for optoelectronics and electronics
  12. Selective preferred orientation for high-performance antimony selenide thin-film solar cells via substrate surface modulation
  13. Applications of Graphene in Five Senses, Nervous System, and Artificial Muscles
  14. Evolving MXene species
  15. Single “Swiss-roll” microelectrode elucidates the critical role of iron substitution in conversion-type oxides
  16. Toward Smart Sensing by MXene
  17. Applications of MXenes in human-like sensors and actuators
  18. Gradient bandgap modification for highly efficient carrier transport in antimony sulfide-selenide tandem solar cells
  19. Epitaxial Growth of Vertically Aligned Antimony Selenide Nanorod Arrays for Heterostructure Based Self‐Powered Photodetector
  20. Enhanced charge carrier transport via efficient grain conduction mode for Sb2Se3 solar cell applications
  21. Unraveling the Evolution of Transition Metals during Li Alloying–Dealloying by In-Operando Magnetometry
  22. A Digital–Analog Integrated Memristor Based on a ZnO NPs/CuO NWs Heterostructure for Neuromorphic Computing
  23. Regulation of Neural Differentiation of ADMSCs using Graphene‐Mediated Wireless‐Localized Electrical Signals Driven by Electromagnetic Induction
  24. An effective formaldehyde gas sensor based on oxygen-rich three-dimensional graphene
  25. Emerging Internet of Things driven carbon nanotubes-based devices
  26. A wafer-scale two-dimensional platinum monosulfide ultrathin film via metal sulfurization for high performance photoelectronics
  27. Inside front cover
  28. Operation characteristics of mid-infrared optical parametric oscillation pumped by layered WS<sub>2</sub> modulated laser
  29. Applications of nanogenerators for biomedical engineering and healthcare systems
  30. Potential of MXene-Based Heterostructures for Energy Conversion and Storage
  31. Large area uniform PtSx synthesis on sapphire substrate for performance improved photodetectors
  32. Front Cover Image
  33. High‐performance electronics and optoelectronics of monolayer tungsten diselenide full film from pre‐seeding strategy
  34. Graphene Biodevices for Early Disease Diagnosis Based on Biomarker Detection
  35. Applications of Carbon Nanotubes in the Internet of Things Era
  36. Micro‐Nano Processing of Active Layers in Flexible Tactile Sensors via Template Methods: A Review
  37. Applications of 2D-Layered Palladium Diselenide and Its van der Waals Heterostructures in Electronics and Optoelectronics
  38. Wafer-scale two-dimensional WSe2 materials for optics, optoelectronics and electronics
  39. Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: Morphology, carrier transport and photovoltaic performance
  40. Synthesis of Wafer‐Scale Graphene with Chemical Vapor Deposition for Electronic Device Applications
  41. Theoretical Insight into High‐Efficiency Triple‐Junction Tandem Solar Cells via the Band Engineering of Antimony Chalcogenides
  42. Biomedical applications: general discussion
  43. Operation characteristics of Mid-infrared optical parametric oscillation pumped by layered WS2 modulated laser
  44. Gradient Bandgap Modification for Highly Efficient Carrier Transport in Antimony Sulfide-Selenide Tandem Solar Cells
  45. Experimental optimization and dynamics solution of active-passive Q-switched intracavity optical parametric oscillator based on EO modulator and layered-WSe2 SA
  46. Microstructure and domain engineering of lithium niobate crystal films for integrated photonic applications
  47. Integrated energy storage system based on triboelectric nanogenerator in electronic devices
  48. State of Charge (SOC) Estimation of Lithium-ion Battery Based on Adaptive Square Root Unscented Kalman Filter
  49. Low Lattice Mismatch InSe–Se Vertical Van der Waals Heterostructure for High‐performance Transistors via Strong Fermi‐Level Depinning (Small Methods 8/2020)
  50. Construction of High Field-Effect Mobility Multilayer MoS2 Field-Effect Transistors with Excellent Stability through Interface Engineering
  51. Unsymmetrical Alveolate PMMA/MWCNT Film as a Piezoresistive E-Skin with Four-Dimensional Resolution and Application for Detecting Motion Direction and Airflow Rate
  52. Assembling Sn3O4 nanostructures on a hydrophobic PVDF film through metal-F coordination to construct a piezotronic effect-enhanced Sn3O4/PVDF hybrid photocatalyst
  53. Low Lattice Mismatch InSe–Se Vertical Van der Waals Heterostructure for High‐performance Transistors via Strong Fermi‐Level Depinning
  54. Research Progress and Prospect of Triboelectric Nanogenerators as Self-Powered Human Body Sensors
  55. Ultrasensitive label-free miRNA sensing based on flexible graphene field-effect transistor without functionalization
  56. Threshold decrease and output-power improvement in dual-loss Q-switched laser based on few-layer WTe2 saturable absorber
  57. Energy Band Alignment in Molybdenum Oxide/Cu(In,Ga)Se2 Interface for High-Efficiency Ultrathin Cu(In,Ga)Se2 Solar Cells from Low-Temperature Growth
  58. WSe 2 2D p‐type semiconductor‐based electronic devices for information technology: Design, preparation, and applications
  59. Rotational design of charge carrier transport layers for optimal antimony trisulfide solar cells and its integration in tandem devices
  60. A thermally flexible and multi-site tactile sensor for remote 3D dynamic sensing imaging
  61. Ultrathin microcrystalline hydrogenated Si/Ge alloyed tandem solar cells towards full solar spectrum conversion
  62. Hybrid genetic algorithm method for efficient and robust evaluation of remaining useful life of supercapacitors
  63. An active and passive dual-loss Q-switched intracavity OPO based on few-layer WS2 saturable absorber
  64. Experimental and dynamical study of a dual Q-switched intracavity OPO based on few-layer MoSe2 SA
  65. Remaining Useful Life Prediction for Supercapacitor Based on Long Short-Term Memory Neural Network
  66. Fabrication of a uniform Au nanodot array/monolayer graphene hybrid structure for high-performance surface-enhanced Raman spectroscopy
  67. Towards high efficiency inverted Sb2Se3 thin film solar cells
  68. Oxygen-incorporated MoX (X: S, Se or P) nanosheets via universal and controlled electrochemical anodic activation for enhanced hydrogen evolution activity
  69. MnSe2/Se Composite Nanobelts as an Improved Performance Anode for Lithium Storage
  70. Effect of Milling and Annealing on Carbon–Silver System
  71. Graphene-activated Optoplasmonic Nanomembrane Cavities for Photodegradation Detection
  72. Ni-Co-N hybrid porous nanosheets on graphene paper for flexible and editable asymmetric all-solid-state supercapacitors
  73. Electron-Driven In Situ Transmission Electron Microscopy of 2D Transition Metal Dichalcogenides and Their 2D Heterostructures
  74. Applications of 2D MXenes in energy conversion and storage systems
  75. Inside front cover
  76. A free-standing superhydrophobic film for highly efficient removal of water from turbine oil
  77. Facile graphitization of silicon nano-particles with ethanol based chemical vapor deposition
  78. Synthesis of hydrophobic carbon nanotubes/reduced graphene oxide composite films by flash light irradiation
  79. Boosting the Photoluminescence of Monolayer MoS2 on High-Density Nanodimer Arrays with Sub-10 nm Gap
  80. 2D material phosphorene usage in lithium ion batteries, supercapacitors and solar cells and so on
  81. Three-dimensional nanostructured graphene: Synthesis and energy, environmental and biomedical applications
  82. Self-Terminating Confinement Approach for Large-Area Uniform Monolayer Graphene Directly over Si/SiOxby Chemical Vapor Deposition
  83. Graphene-Like ZnO: A Mini Review
  84. CVD growth of 1D and 2D sp2 carbon nanomaterials
  85. Confirming the Dual Role of Etchants during the Enrichment of Semiconducting Single Wall Carbon Nanotubes by Chemical Vapor Deposition
  86. Oxidation as A Means to Remove Surface Contaminants on Cu Foil Prior to Graphene Growth by Chemical Vapor Deposition
  87. Direct synthesis of graphene from adsorbed organic solvent molecules over copper
  88. On the Role of Vapor Trapping for Chemical Vapor Deposition (CVD) Grown Graphene over Copper
  89. Effect of Na on lower open circuit voltage of flexible CIGS thin-film solar cells prepared by the low-temperature process
  90. Preparation and Characteristics of MoSe2 Interlayer in Bifacial Cu(In,Ga)Se2 Solar Cells
  91. Accurate Line Detection by Adjusting Hough Transform Threshold Adaptively
  92. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process