All Stories

  1. A constitutive model for the mechanical behaviour of saturated frozen soils considering the dual effects of confining pressure
  2. Saturation Hysteresis During Cyclic Injections of Immiscible Fluids in Porous Media: An Invasion Percolation Study
  3. A study of pore properties in reconstituted Lucera clay at states of the critical state framework
  4. Investigating the local heterogeneity of compacted bentonite/sand mixtures
  5. Exploring crystallization pressure limits via molecular simulation
  6. Long-term thermo-mechanical behaviour of an energy pile installed in clay: Field experiments and numerical simulations
  7. Accelerating the Energy Transition with Energy Geotechnics: editorial
  8. Magnetic Resonance Imaging as a tool for investigating frost heave dynamics: a new experimental setup and application
  9. Microscopic swelling behaviors and structural responses of aggregate system: A coarse-grained molecular dynamics study
  10. Apprentissage automatique en géotechnique : étude de cas dans le domaine des tunnels
  11. PoroFluidics: Deterministic fluid control in porous microfluidics
  12. Experimental study on the microscopic swelling–shrinking mechanisms of clay-sand mixtures from wetting to drying
  13. Combining magnetic resonance imaging and X-ray microtomography to analyse water transfer in unsaturated expansive clay
  14. Controlled Haines jumps in a dual-channel multiphase system: inferring fluid properties from the dynamics of interface motion
  15. Thermally-induced long-term behavior of energy piles under inclined load in saturated clay
  16. Identifying ice lens initiation of frozen soils using particle image velocimetry method
  17. Ouvrages emblématiques des années 1980-1990
  18. Impact of alkalis and shrinkage-reducing admixtures on hydration and pore structure of hardened cement pastes
  19. Structural build-up of 3D printed earth by drying
  20. Experimental study on the freezing/thawing characteristic curves of sand/clay mixtures
  21. In memoriam of Patrick Selvadurai
  22. An open-source numerical laboratory to assess the poromechanical behavior of fractured rocks
  23. Exploring two regimes of water mobility in unsaturated expansive clay using NMR relaxometry
  24. Pore changes in an illitic clay during one-dimensional compression
  25. Application of the Akaike Information Criterion to the interpretation of bender element tests
  26. PoroFluidics: deterministic fluid control in porous microfluidics
  27. PoroFluidics: Deterministic fluid control in porous microfluidics
  28. Effect of supercritical carbonation on porous structure and mechanical strength of cementitious materials modified with bacterial nanocellulose
  29. Analysis of biopolymer modified oil cement under supercritical CO2
  30. Studying water infiltration on bentonite/sand blocks with MRI and X-Ray μCT techniques
  31. Lightweight cement pastes with hollow glass microspheres: Analytical estimation of elastic parameters
  32. Pore changes in an illitic clay during one-dimensional compression
  33. Thermally induced long-term behavior of energy piles under vertical-horizontal combined mechanical loads
  34. Experimental study on the microscopic swelling-shrinking mechanisms of clay-sand mixtures from wetting to drying
  35. A Comparative Study of Ensemble Methods for Prediction of Surface Settlement Induced by TBM Tunneling
  36. Solubility of NaCl under anisotropic stress state
  37. A simple load transfer method for energy pile groups
  38. Effect of clay content on the thermal conductivity of unfrozen and frozen sandy soils
  39. Mechanical and creep properties of granitic minerals of albite, biotite, and quartz at elevated temperature
  40. Hydraulic and mechanical behaviour of volcanic soils and implications for evaluating slope stability
  41. Wettability impacts residual trapping of immiscible fluids during cyclic injection
  42. Cyclically thermally-activated pile under combined axial/horizontal loads in clay
  43. Small-scale cyclically thermally-activated pile under inclined mechanical loads
  44. Effects of microstructure on THM behaviour of geomaterials
  45. Impact of sand on the water retention properties of a bentonite/sand mixture by NMR characterization
  46. Mechanical Behavior of Well Cement Slurries Lightened with Hollow Microspheres of Different Strength
  47. Relating wave frequency and pore fluid homogeneity in quasi-saturated sands
  48. Water retention curve of clayey sands determined from pore structure by using various methods
  49. Pore-scale modeling of multiphase flow in porous media using a conditional generative adversarial network (cGAN)
  50. Effect of fines content on soil freezing characteristic curve of sandy soils
  51. Poromechanical analysis of oil well cements in CO2-rich environments
  52. Coupled Hydro-Mechanical Modeling of Swelling Processes in Clay–Sulfate Rocks
  53. CO2 plume and pressure monitoring through pressure sensors above the caprock
  54. Cement with bacterial nanocellulose cured at reservoir temperature: Mechanical performance in the context of CO
  55. Emergence of unstable invasion during imbibition in regular porous media
  56. A pore-resolved interface tracking algorithm for simulating multiphase flow in arbitrarily structured porous media
  57. The Influence of Cyclic Thermal Loading on the Response of Energy Piles Subjected to Combined Axial/Horizontal Loading
  58. Influence of multiscale surface roughness on permeability in fractures
  59. Influence of heterogeneities of density on the hydromechanical behaviour of pellet-based bentonite materials in imbibition experiments
  60. Performance of lightweight cement pastes under CO2 storage conditions
  61. Undrained cylindrical cavity expansion/contraction in stiff clays using a two‐surface plasticity model
  62. Towards the End of Drying of Granular Materials: Enhanced Evaporation and Drying‐Induced Collapse
  63. Impact of an SRA (hexylene glycol) on irreversible drying shrinkage and pore solution properties of cement pastes
  64. Towards the end of drying of granular materials: enhanced evaporation and drying-induced collapse
  65. Effect of Grain Shape on Quasi‐Static Fluid‐Fluid Displacement in Porous Media
  66. Effect of bacterial nanocellulose on the fresh and hardened states of oil well cement
  67. Permeability of Uniformly Graded 3D Printed Granular Media
  68. Determining Bishop's parameter χ based on pore size distribution
  69. General Statistics-Based Methodology for the Determination of the Geometrical and Mechanical Representative Elementary Volumes of Fractured Media
  70. Packing of wet monodisperse spheres
  71. Modélisation physique du comportement thermo-mécanique d’un pieu géothermique
  72. Droplet Transport: Enhancing Spontaneous Droplet Motion on Structured Surfaces with Tailored Wedge Design (Adv. Mater. Interfaces 2/2021)
  73. Effect of grain shape on quasi-static fluid-fluid displacement in porous media
  74. A finite difference model for undefined end boundary to analyse the heat transfer in dry sands
  75. Modelling the behaviour of bentonite pellet-powder mixtures upon hydration from dry granular state to saturated homogeneous state
  76. New triaxial device for unsaturated soils with local measurements
  77. Thermo-elasto-plastic modeling of saturated clays under undrained conditions
  78. Investigating the hydromechanical behaviour of bentonite pellets by swelling pressure tests and discrete element modelling
  79. Contactless probing of polycrystalline methane hydrate at pore scale suggests weaker tensile properties than thought
  80. Long-term thermo-mechanical behaviour of energy piles in clay
  81. A two-surface thermomechanical plasticity model considering thermal cyclic behavior
  82. Fast Fourier transform-based homogenisation of gas hydrate bearing sediments
  83. Enhancing Spontaneous Droplet Motion on Structured Surfaces with Tailored Wedge Design
  84. Bishop coefficients in elastic and plastic regimes of unsaturated soils
  85. Effect of Wetting Transition during Multiphase Displacement in Porous Media
  86. Effects of the initial granular structure of clay sealing materials on their swelling properties: experiments and DEM simulations
  87. Modelling the hydromechanical behaviour of expansive granular mixtures upon hydration
  88. CO2 geological storage: Microstructure and mechanical behavior of cement modified with a biopolymer after carbonation
  89. Numerical homogenization method in the modeling of gas hydrate bearing sediments
  90. Modelling the hydromechanical behaviour of a granular expansive clayey soil upon hydration using discrete element method
  91. A Fast Testing Method for Discriminating Hardened Cement Paste Reactivity with External Sulphate
  92. Experimental investigation on the grain-scale compression behavior of loose wet granular material
  93. Disorder characterization of porous media and its effect on fluid displacement
  94. Thermo-mechanical behavior of energy diaphragm wall: Physical and numerical modelling
  95. Hydro-mechanical behaviour of high-density bentonite pellet on partial hydration
  96. Permeability changes in coal seams: The role of anisotropy
  97. Analysis of Modified Cement Paste in the Context of CO2 Geological Storage
  98. Fabric characterisation in transitional soils
  99. Evaluation de la première fréquence propre d’un modèle réduit d’éolienne offshore fondé sur monopieu
  100. Book reviewThermo-poroelasticity and Geomechanics. A. P. S. Selvadurai and A. P. Suvorov. Cambridge, UK: Cambridge University Press, 2017. 268 pp. ISBN 978-1-107-14289-3, £69·99
  101. Water retention and thermal conductivity of a natural unsaturated loess
  102. Conductive Heat Transfer Analysis of Energy Pile
  103. Elastic and Filtration Properties of Coal by Adsorption Test Data Based on Inverse Problem Solution
  104. Poromechanics VI
  105. Experimental Evaluation of the Natural Frequency of an Offshore Wind Turbine’s Scaled Model
  106. Estimation of the deformation and filtration properties of coal by adsorption test data based on solution of the inverse problem
  107. Three-dimensional numerical and analytical study of horizontal group of square anchor plates in sand
  108. Direct and inverse problems of gas emission and the sorptive deformation of coal beds
  109. Salient comments from an expert panel on energy geotechnics
  110. Long-term thermo-mechanical behavior of energy pile in dry sand
  111. Numerical study of one-dimensional compression of granular materials. I. Stress-strain behavior, microstructure, and irreversibility
  112. Numerical study of one-dimensional compression of granular materials. II. Elastic moduli, stresses, and microstructure
  113. Discrete Digital Projections Correlation: A Reconstruction-Free Method to Quantify Local Kinematics in Granular Media by X-ray Tomography
  114. Investigation into macroscopic and microscopic behaviors of wet granular soils using discrete element method and X-ray computed tomography
  115. A DEM study of oedometric compression of model granular materials Initial state influence, stress ratio, elasticity, irreversibility.
  116. A Suction- and Temperature-Controlled Oedometric Device
  117. Experimental Study on a Scaled Model of Offshore Wind Turbine on Monopile Foundation
  118. Mechanical behaviour of a small-scale energy pile in saturated clay
  119. Thermo-mechanical behavior of small-scale energy pile in dry sand
  120. Temperature effects on soil shear strength
  121. Adsorptive-mechanical properties of reconstituted granular coal: Experimental characterization and poromechanical modeling
  122. Basic Mechanical Properties of Wet Granular Materials: A DEM Study
  123. Macro-microscopic one-dimensional compression of wet granular soils by experimental investigation
  124. Investigation into the isotropic compression of wet granular soils using discrete element method
  125. A two-surface thermomechanical model for saturated clays
  126. Stress from NaCl crystallisation by carbon dioxide injection in aquifers
  127. Effects of Humidity on the Time-Dependent Behaviour of Geomaterials
  128. A two-surface plasticity model for stiff clay
  129. Impact of excavation damage on the thermo-hydro-mechanical properties of natural Boom Clay
  130. Benchmarking selection of parameter values for the Barcelona basic model
  131. Experimental investigation of the influence of supercritical state on the relative permeability of Vosges sandstone
  132. Desorption-induced shear failure of coal bed seams during gas depletion
  133. Panel Session on Energy Geo-Engineering
  134. Assessment of exit hydraulic gradients at the toe of levees in water drawdown conditions
  135. Anisotropic thermal conductivity of natural Boom Clay
  136. Measurement and modeling of adsorptive–poromechanical properties of bituminous coal cores exposed to CO2: Adsorption, swelling strains, swelling stresses and impact on fracture permeability
  137. An elastoplastic model with combined isotropic–kinematic hardening to predict the cyclic behavior of stiff clays
  138. Design tools for thermoactive geotechnical systems
  139. A μCT investigation of the collapse of a loose unsaturated sand specimen: Comparison between macroscopic and mesoscopic scale
  140. Time effects in geomaterials
  141. Experimental and modelling issues in unsaturated soils mechanics: Role of microstructure
  142. New triaxial device for unsaturated soils with local measurements
  143. A Thermodynamic Approach to Effective Stresses in Unsaturated Soils Incorporating the Concept of Partial Pore Deformations
  144. A simple method for numerical modelling of mechanical behaviour of an energy pile
  145. Editorial: Energy geostorage
  146. Investigating the anisotropy of the shear modulus of natural Boom Clay
  147. Experimental study on the mechanical behaviour of a heat exchanger pile using physical modelling
  148. Combined effects of structure and partial saturation in natural soils
  149. A transverse isotropic model for microporous solids: Application to coal matrix adsorption and swelling
  150. Dependence on injection temperature and on aquifer’s petrophysical properties of the local stress applying on the pore wall of a crystallized pore in the context of CO2storage in deep saline aquifers
  151. Full 3D investigation and characterisation of capillary collapse of a loose unsaturated sand using X-ray CT
  152. A viscoplastic constitutive model for unsaturated geomaterials
  153. Behavior of Heat-Exchanger Piles from Physical Modeling
  154. A Chemo-Poromechanical Model for Well/Caprock Interface in Presence of CO2
  155. Measurement of Adsorptive-Mechanical Properties of Fractured Coal Cores
  156. Poromechanics of Salt Nucleation within an Unsaturated Reservoir Rock
  157. Rock Stiffness and Permeability During Crack Opening and Closure: A Planar Transverse Isotropic (PTI) Model Using Pore Size Distributions (PSD)
  158. Effects of the Presence of CO2 at the Well/Caprock Interface: Crystallization Damage
  159. Editorial: Experimental micro-mechanics for geomaterials
  160. X-ray microtomography characterisation of the changes in statistical homogeneity of an unsaturated sand during imbibition
  161. Numerical modelling of the hydro-chemo-mechanical behaviour of geomaterials in the context of CO2injection
  162. Retention and permeability properties of damaged porous rocks
  163. On some advanced thermo-mechanical models for saturated clays
  164. Chemo-Poromechanical Study of Wellbore Cement Integrity
  165. Geomechanics in CO2Storage Facilities
  166. Aging and Integrity
  167. Fracture, Deformation and Coupled Effects
  168. Collapse behaviour of a natural loess from Northern France
  169. Stress Induced by Precipitation of Salts under CO2 Injection in Deep Saline Aquifers
  170. Explicit integration of a thermo-mechanical model for clays
  171. Preliminary study on the mechanical behaviour of heat exchanger pile in physical model
  172. A thermodynamically consistent framework for saturated viscoplastic rock-materials subject to damage
  173. Strain-rate effects in deep marine clays from the Gulf of Guinea
  174. On-sample water content measurement for a complete local monitoring in triaxial testing of unsaturated soils
  175. The water retention properties of a natural unsaturated loess from northern France
  176. Influence of damage on pore size distribution and permeability of rocks
  177. The Influence of Changes in Water Content on the Electrical Resistivity of a Natural Unsaturated Loess
  178. A Local Monitoring of Water Content in Unsaturated Soil Triaxial Testing
  179. Some aspects of the compression and collapse behaviour of an unsaturated natural loess
  180. Benchmark of experimental techniques for measuring and controlling suction
  181. Benchmark of constitutive models for unsaturated soils
  182. A microstructurally based effective stress for unsaturated soils
  183. Modelling the unsaturated behaviour of structured soils
  184. On the time-dependent behaviour of unsaturated geomaterials
  185. Revisiting the thermodynamics of hardening plasticity for unsaturated soils
  186. A constitutive model for unsaturated cemented soils under cyclic loading
  187. A damage model for unsaturated natural loess submitted to cyclic loading
  188. Sedimentation–consolidation of a double porosity material
  189. Unsaturated behaviour of soils
  190. Adaptation of existing behaviour models to unsaturated states: application to CJS model
  191. A general framework for constitutive models adaptation to unsaturated states
  192. Geology, Paleoecology, and Palynology of some Oligocene Rocks in the Rocky Mountain Trench of British Columbia