All Stories

  1. Mathematical Design Framework for a Wheelchair-Mounted Door-Pushing Obstacle-Gliding Accessory

    Article • November 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Javeed Shaikh Mohammed

  2. End-user reported outcomes of a customizable manual wheelchair

    Article • Assistive Technology, August 2025, Taylor & Francis

    Javeed Shaikh Mohammed

  3. Recent progress in the integrating of smartphone-based biosensors with nanozymes for biomedical analysis

    Article • Microchemical Journal, April 2025, Elsevier

    Javeed Shaikh Mohammed

  4. A Novel Partitioned Random Forest Method-Based Facial Emotion Recognition

    Article • IEEE Access, January 2025, Institute of Electrical & Electronics Engineers (IEEE)

    Javeed Shaikh Mohammed

  5. Long-term community integration study of an affordable manual standing wheelchair

    Article • Disability and Rehabilitation Assistive Technology, February 2024, Taylor & Francis

    Javeed Shaikh Mohammed

  6. Door-Opening Technologies: Search for Affordable Assistive Technology

    Article • Technologies, December 2023, MDPI AG

    Javeed Shaikh Mohammed

  7. 3D-printed design iteration of a low-tech positive obstacle pushing/gliding wheelchair accessory

    Article • Disability and Rehabilitation Assistive Technology, October 2023, Taylor & Francis

    Javeed Shaikh Mohammed

  8. Emotion Recognition from Spatio-Temporal Representation of EEG Signals via 3D-CNN with Ensemble Learning Techniques

    Article • Brain Sciences, April 2023, MDPI AG

    Javeed Shaikh Mohammed

  9. User experience study of an affordable manual standing wheelchair

    Article • Disability and Rehabilitation Assistive Technology, April 2022, Taylor & Francis

    Javeed Shaikh Mohammed

  10. Validation of wearable inertial sensor-based gait analysis system for measurement of spatiotemporal parameters and lower extremity joint kinematics in sagittal plane

    Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, January 2022, SAGE Publications

    Javeed Shaikh Mohammed

  11. Design of a low-cost, reconfigurable, standing wheelchair with easy and stable sit-stand-sit transition capability

    Article • Disability and Rehabilitation Assistive Technology, October 2021, Taylor & Francis

    Javeed Shaikh Mohammed

  12. Design journey of an affordable manual standing wheelchair

    Article • Disability and Rehabilitation Assistive Technology, March 2021, Taylor & Francis

    Javeed Shaikh Mohammed

  13. A self-aligning end-effector robot for individual joint training of the human arm

    Article • Journal of Rehabilitation and Assistive Technologies Engineering, January 2021, SAGE Publications

    Javeed Shaikh Mohammed

  14. Proof-of-concept of a stair-climbing add-on device for wheelchairs

    Article • Medical Engineering & Physics, November 2020, Elsevier

    Javeed Shaikh Mohammed

  15. A self-aligning end-effector robot for individual joint training of the human arm

    Article • July 2020, Cold Spring Harbor Laboratory Press

    Javeed Shaikh Mohammed

  16. Antibacterial evaluation of activated carbon cloth with Ag+ impregnated with ZnO nanoparticles

    Article • Research Journal of Textile and Apparel, June 2019, Emerald

    Javeed Shaikh Mohammed

  17. obstacle pushing/gliding wheelchair accessory

    Article • Disability and Rehabilitation Assistive Technology, December 2018, Taylor & Francis

    Mr soran jalal abdullah, Javeed Shaikh Mohammed

  18. Bioinspired dynamic microcapsules

    Article • Soft Matter, January 2018, Royal Society of Chemistry

    Javeed Shaikh Mohammed

  19. Modeling and Simulation of Door Pushing Wheelchair Accessories

    Article • Assistive Technology, March 2017, Taylor & Francis

    Mr soran jalal abdullah, Javeed Shaikh Mohammed

  20. FACTORS INFLUENCING FACE MASK SELECTION AND DESIGN SPECIFICATIONS: RESULTS FROM PILOT STUDY AMONGST MALAYSIAN UMRAH PILGRIMS

    Article • Jurnal Teknologi (Sciences & Engineering), February 2017, Penerbit UTM Press

    Javeed Shaikh Mohammed

  21. Applications of 3D printing technologies in oceanography

    Article • Methods in Oceanography, December 2016, Elsevier

    Javeed Shaikh Mohammed

  22. CHARACTERIZATION OF CaCO3 MICROSPHERES FABRICATED USING DISTILLED WATER

    Article • Malaysian Journal of Analytical Science, April 2016, Penerbit Universiti Kebangsaan Malaysia (UKM Press)

    Javeed Shaikh Mohammed

  23. Micro- and nanotechnologies in plankton research

    Article • Progress In Oceanography, May 2015, Elsevier

    Javeed Shaikh Mohammed

  24. BEHAVIOR OF ARTICULAR CHONDROCYTES ON NANOENGINEERED SURFACES

    Article • Nano LIFE, September 2013, World Scientific Pub Co Pte Lt

    Dr David K Mills, Javeed Shaikh Mohammed

  25. Chondrocyte Behavior on Micropatterns Fabricated Using Layer-by-Layer Lift-Off: Morphological Analysis

    Article • Journal of Medical Engineering, January 2013, Hindawi Publishing Corporation

    Dr David K Mills, Javeed Shaikh Mohammed

  26. In vitro evaluation of chondrosarcoma cells and canine chondrocytes on layer-by-layer (LbL) self-assembled multilayer nanofilms

    Article • Biofabrication, December 2012, Institute of Physics Publishing

    Javeed Shaikh Mohammed

  27. Growth and behaviour of bovine articular chondrocytes on nanoengineered surfaces: Part I

    Article • International Journal of Nanotechnology, January 2011, Inderscience Publishers

    Dr David K Mills, Javeed Shaikh Mohammed

  28. Microfluidic perifusion and imaging device for multi-parametric islet function assessment

    Article • Biomedical Microdevices, March 2010, Springer Science + Business Media

    Javeed Shaikh Mohammed

  29. Bioinspired Design of Dynamic Materials

    Article • Advanced Materials, June 2009, Wiley

    Javeed Shaikh Mohammed

  30. Supported Nanocomposite Membranes: Bridging Microtechnology with Nanotechnology

    Article • Journal of Nanoscience and Nanotechnology, May 2009, American Scientific Publishers

    Javeed Shaikh Mohammed

  31. Modulating growth factor release from hydrogels via a protein conformational change

    Article • Soft Matter, January 2009, Royal Society of Chemistry

    Javeed Shaikh Mohammed

  32. Microfluidic device for multimodal characterization of pancreatic islets

    Article • Lab on a Chip, January 2009, Royal Society of Chemistry

    Javeed Shaikh Mohammed

  33. Polymer/Colloid Surface Micromachining: Micropatterning of Hybrid Multilayers

    Article • Langmuir, November 2008, American Chemical Society (ACS)

    Javeed Shaikh Mohammed

  34. REAL-TIME COMPREHENSIVE HUMAN ISLET ASSESSMENT IN VITRO USING FLUORESCENCE IMAGING AND MICROFLUIDIC PERIFUSION SYSTEM

    Article • Transplantation, July 2008, Wolters Kluwer Health

    Javeed Shaikh Mohammed

  35. Rapid prototyping for neuroscience and neural engineering

    Article • Journal of Neuroscience Methods, July 2008, Elsevier

    Javeed Shaikh Mohammed

  36. Microfluidic add-on for standard electrophysiology chambers

    Article • Lab on a Chip, January 2008, Royal Society of Chemistry

    Javeed Shaikh Mohammed

  37. Quantification of Hydrophobic Recovery and Temporal Bonding in Polydimethylsiloxane

    Article • The Journal of Undergraduate Research at the University of Illinois at Chicago, December 2007, University of Illinois Libraries

    Javeed Shaikh Mohammed

  38. Brain Slice Stimulation Using a Microfluidic Network and Standard Perfusion Chamber

    Article • Journal of Visualized Experiments, October 2007, MyJove Corporation

    Javeed Shaikh Mohammed

  39. Fabrication of Interdigitated Micropatterns of Self-Assembled Polymer Nanofilms Containing Cell-Adhesive Materials

    Article • Langmuir, February 2006, American Chemical Society (ACS)

    Javeed Shaikh Mohammed

  40. Bulk micromachining of a MEMS tunable Fabry-Perot interferometer: effect of residual silicon on device performance

    Article • Journal of Micro/Nanolithography MEMS and MOEMS, October 2004, SPIE

    Javeed Shaikh Mohammed

  41. Micropatterning of Nanoengineered Surfaces to Study Neuronal Cell Attachment in Vitro

    Article • Biomacromolecules, July 2004, American Chemical Society (ACS)

    Javeed Shaikh Mohammed

  42. Integrated micro-/nanofabrication of cell culture scaffolds with selective cell adhesion and fluorescent indicators

    Article • January 2004, SPIE

    Javeed Shaikh Mohammed

  43. Lithography Combined with Multilayer Nanoassembly: Versatile Approach to Fabricate Nanocomposite Micropatterns for Biointerfaces

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Javeed Shaikh Mohammed

  44. Cell adhesion testing using novel testbeds containing micropatterns of complex nanoengineered multilayer films

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Javeed Shaikh Mohammed