Contact

All Stories

  1. Novel merging and redividing microchannel heat sink system for enhanced heat transfer and reduced flow resistance

    Article • International Journal of Thermal Sciences, December 2025, Elsevier

    Dr Javad Abolfazli Esfahani

  2. The analytical model of flame characteristics of hydrogen–air through wall and gas interaction analysis

    Article • Heat Transfer, October 2024, Wiley

    Dr Javad Abolfazli Esfahani

  3. Predicting the physics of turbulent fluid flow passing through nature-inspired dolphin turbulator by artificial neural network

    Article • Journal of Thermal Analysis and Calorimetry, September 2024, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  4. Improving the photovoltaic thermal system efficiency with nature-inspired dolphin turbulators from energy and exergy viewpoints

    Article • Renewable Energy, July 2024, Elsevier

    Dr Javad Abolfazli Esfahani

  5. Effect of hydrogen concentration on the stabilization of premixed ammonia/hydrogen flames in a heated micro-combustor: numerical investigation

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, May 2023, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  6. Multi-objective optimization of a tubular heat exchanger enhanced with delta winglet vortex generator and nanofluid using a hybrid CFD-SVR method

    Article • International Journal of Thermal Sciences, April 2023, Elsevier

    Dr Javad Abolfazli Esfahani

  7. Hybrid CFD-ANN approach for evaluation of bio-inspired dolphins dorsal fin turbulators of heat exchanger in turbulent flow

    Article • Applied Thermal Engineering, January 2023, Elsevier

    Dr Javad Abolfazli Esfahani

  8. Parameter study of a porous solar-based propane steam reformer using computational fluid dynamics and response surface methodology

    Article • International Journal of Hydrogen Energy, September 2022, Elsevier

    Dr Javad Abolfazli Esfahani

  9. Numerical analysis of wind turbines blade in deep dynamic stall

    Article • Renewable Energy, August 2022, Elsevier

    Dr Javad Abolfazli Esfahani

  10. Performance analysis of a micro-scale integrated hydrogen production system by analytical approach, machine learning, and response surface methodology

    Article • Energy, June 2022, Elsevier

    Dr Javad Abolfazli Esfahani

  11. Integrated Vapor Compression Chiller with Bottoming Organic Rankine Cycle and Onsite Low-Grade Renewable Energy

    Article • Energies, October 2021, MDPI AG

    Dr Javad Abolfazli Esfahani, Michael Ekwonu, Dr Michael Chukwuemeka Ekwonu

  12. Multi-purpose prediction of the various edge cut twisted tape insert characteristics: multilayer perceptron network modeling

    Article • June 2021, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  13. Analysis of entropy generation and thermal–hydraulic of various plate-pin fin-splitter heat recovery systems using Al2O3/H2O nanofluid

    Article • The European Physical Journal Plus, May 2021, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  14. Assessment of a District Trigeneration Biomass Powered Double Organic Rankine Cycle as Primed Mover and Supported Cooling

    Article • Energies, February 2021, MDPI AG

    Dr Javad Abolfazli Esfahani, Michael Ekwonu, Dr Michael Chukwuemeka Ekwonu

  15. Assessment of a cylindrical porous radiant burner with internal combustion regime for sustainable energy: Numerical analysis of the radiant efficiency and NO production

    Article • Sustainable Energy Technologies and Assessments, February 2021, Elsevier

    Dr Javad Abolfazli Esfahani

  16. Effects of pore geometry on the natural convective heat transmission in a porous cavity: a lattice Boltzmann simulation

    Article • Journal of Thermal Analysis and Calorimetry, October 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  17. Sudden contraction effects in nanochannel cross section on the rarefied gas flow characteristics: LBM analysis

    Article • The European Physical Journal Plus, October 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  18. Effect of condensing cavity on the performance of a passive solar desalination system: an experimental study

    Article • Environmental Science and Pollution Research, September 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani, Dr. Hashim Sahar Mohaisen

  19. Cylindrical porous radiant burner with internal combustion regime: Energy saving analysis using response surface method

    Article • Energy, September 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  20. Improving the melting performance of PCM thermal energy storage with novel stepped fins

    Article • Journal of Energy Storage, August 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  21. Simulation of Combustion Flowfield in Porous Media with Lattice Boltzmann Method

    Article • Journal of Thermophysics and Heat Transfer, July 2020, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani, S. A. Fanaee

  22. Numerical investigation of turbulent CuO–water nanofluid inside heat exchanger enhanced with double V-cut twisted tapes

    Article • Journal of Thermal Analysis and Calorimetry, May 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  23. CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert

    Article • Powder Technology, May 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  24. Condensation in the presence of non-condensable gases in a convergent 3D channel

    Article • International Journal of Heat and Mass Transfer, May 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  25. Effects of perforated anchors on heat transfer intensification of turbulence nanofluid flow in a pipe

    Article • Journal of Thermal Analysis and Calorimetry, April 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  26. Developing mathematical modeling of the heat and mass transfer in a planar micro-combustor with detailed reaction mechanisms

    Article • Journal of Thermal Analysis and Calorimetry, April 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  27. Effect of hydrogen addition on conjugate heat transfer in a planar micro-combustor with the detailed reaction mechanism: An analytical approach

    Article • International Journal of Hydrogen Energy, April 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  28. An experimental design of the solid oxide fuel cell performance by using partially oxidation reforming of natural gas

    Article • Renewable Energy, March 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  29. Lattice Boltzmann simulation of diluted gas flow inside irregular shape microchannel by two relaxation times on the basis of wall function approach

    Article • Vacuum, March 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  30. A numerical investigation on the Magnetophoretic-guided stem cells delivery in a bend blood vessel

    Article • Journal of Magnetism and Magnetic Materials, March 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  31. Pinch-off location and time during 2D droplet impact onto a wetted stationary cylinder using the lattice Boltzmann method

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, February 2020, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  32. Effects of flexibility of conductive plate on efficiency of an induced-charge electrokinetic micro-mixer under constant and time-varying electric fields-A comprehensive parametric study

    Article • Chemical Engineering Science, February 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  33. Numerical study of turbulent flow inside heat exchangers using perforated louvered strip inserts

    Article • International Journal of Heat and Mass Transfer, February 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  34. Corrigendum to “Experimental investigation on thermal performance and economic analysis of cosine wave tube structure in a shell and tube heat exchanger” [J. Energy Convers. Manage. 175 (2018) 86–98]

    Article • Energy Conversion and Management, February 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  35. Numerical investigation of heat transfer enhancement inside heat exchanger tubes fitted with perforated hollow cylinders

    Article • International Journal of Thermal Sciences, January 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  36. A comprehensive geometrical study on an induced-charge electrokinetic micromixer equipped with electrically conductive plates

    Article • International Journal of Heat and Mass Transfer, January 2020, Elsevier

    Dr Javad Abolfazli Esfahani

  37. An experimental investigation on flow-rate effects of internal CPOX reforming in SOFCs

    Article • Applied Thermal Engineering, December 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  38. A review on potentials of coupling PCM storage modules to heat pipes and heat pumps

    Article • Journal of Thermal Analysis and Calorimetry, November 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  39. Mixing process and mass transfer in a novel design of induced-charge electrokinetic micromixer with a conductive mixing-chamber

    Article • International Communications in Heat and Mass Transfer, November 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  40. Effects of grains shapes of porous media on combustion onset—A numerical simulation using Lattice Boltzmann method

    Article • Computers & Mathematics with Applications, October 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  41. ε-NTU analysis of turbulent flow in a corrugated double pipe heat exchanger: A numerical investigation

    Article • Applied Thermal Engineering, August 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  42. Numerical investigation of turbulent Cu-water nanofluid in heat exchanger tube equipped with perforated conical rings

    Article • Advanced Powder Technology, July 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  43. A numerical investigation of magnetic field effect on blood flow as biomagnetic fluid in a bend vessel

    Article • Journal of Magnetism and Magnetic Materials, July 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  44. Performance intensification of turbulent flow through heat exchanger tube using double V-cut twisted tape inserts

    Article • Chemical Engineering and Processing - Process Intensification, July 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  45. Simulation of rarefied gas flow in a microchannel with backward facing step by two relaxation times using Lattice Boltzmann method – Slip and transient flow regimes

    Article • International Journal of Mechanical Sciences, July 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  46. Attenuation of radiative heat transfer in natural convection from a heated plate by scattering properties of Al2O3 nanofluid: LBM simulation

    Article • International Journal of Mechanical Sciences, June 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  47. Numerical investigation of different geometrical parameters of perforated conical rings on flow structure and heat transfer in heat exchangers

    Article • Applied Thermal Engineering, June 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  48. Lattice Boltzmann simulation of combined volumetric radiation/natural convection to consider optical properties of nanoparticles

    Article • Radiation Physics and Chemistry, June 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  49. Experimental study on thermal analysis of a novel shell and tube heat exchanger with corrugated tubes

    Article • Journal of Thermal Analysis and Calorimetry, May 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  50. Two-dimensional analytical investigation of conjugate heat transfer in a finite-length planar micro-combustor for a hydrogen-air mixture

    Article • International Journal of Hydrogen Energy, May 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  51. Evacuating liquid coatings from a diffusive oblique fin in micro-/mini-channels

    Article • Journal of Thermal Analysis and Calorimetry, April 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  52. Numerical investigation of rectangular-cut twisted tape insert on performance improvement of heat exchangers

    Article • International Journal of Thermal Sciences, April 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  53. Potential of gear-ring turbulator in three-dimensional heat exchanger tube from second law of thermodynamic viewpoint

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, April 2019, Emerald

    Dr Javad Abolfazli Esfahani

  54. Entropy generation of turbulent Cu–water nanofluid flow in a heat exchanger tube fitted with perforated conical rings

    Article • Journal of Thermal Analysis and Calorimetry, March 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  55. Sensitivity Analysis of a Heat Exchanger Tube Fitted With Cross-Cut Twisted Tape With Alternate Axis

    Article • Journal of Heat Transfer, February 2019, ASME International

    Dr Javad Abolfazli Esfahani

  56. A 3-D numerical simulation of non-Newtonian blood flow through femoral artery bifurcation with a moderate arteriosclerosis: investigating Newtonian/non-Newtonian flow and its effects on elastic vessel walls

    Article • Heat and Mass Transfer, February 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  57. A lattice Boltzmann study on dripping process during 2D droplet impact onto a wetted rotating cylinder

    Article • Journal of Molecular Liquids, February 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  58. Simulation of conjugate radiation–forced convection heat transfer in a porous medium using the lattice Boltzmann method

    Article • Meccanica, February 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  59. Performance enhancement of heat exchangers using eccentric tape inserts and nanofluids

    Article • Journal of Thermal Analysis and Calorimetry, January 2019, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  60. Optimization of convective drying by response surface methodology

    Article • Computers and Electronics in Agriculture, January 2019, Elsevier

    Dr Javad Abolfazli Esfahani

  61. Targeting a channel coating by using magnetic field and magnetic nanofluids

    Article • Journal of Thermal Analysis and Calorimetry, December 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  62. Enhancing the convergence speed of numerical solution using the flow rate control in a novel lattice Boltzmann method

    Article • The European Physical Journal Plus, December 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  63. Cu-water nanofluid flow and heat transfer in a heat exchanger tube equipped with cross-cut twisted tape

    Article • Powder Technology, November 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  64. Experimental investigation on thermal performance and economic analysis of cosine wave tube structure in a shell and tube heat exchanger

    Article • Energy Conversion and Management, November 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  65. Taguchi optimization of combined radiation/natural convection of participating medium in a cavity with a horizontal fin using LBM

    Article • Physica A Statistical Mechanics and its Applications, November 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  66. Heat transfer in an eight-pass oscillating loop heat pipe equipped with cooling tower

    Article • Journal of Thermal Analysis and Calorimetry, October 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  67. Volume-of-Fluid Model for Simulating Vapor–Liquid Phase Change in a Solar Still

    Article • Journal of Thermophysics and Heat Transfer, October 2018, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  68. Exactness of measured/predicted temperature distributions for heat generation in arbitrary non-variable cross-section bar using entropy generation method

    Article • Applied Mathematical Modelling, October 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  69. Energy and drying time optimization of convective drying: Taguchi and LBM methods

    Article • Drying Technology, September 2018, Taylor & Francis

    Dr Javad Abolfazli Esfahani

  70. Investigation of energy consumption and renewable energy resources in top ten countries with most energy consumption

    Article • IOP Conference Series Materials Science and Engineering, August 2018, Institute of Physics Publishing

    Dr Javad Abolfazli Esfahani

  71. 2D lattice Boltzmann investigation of saturated pool boiling using a tunable surface tension model: Prandtl number effects on film boiling

    Article • Meccanica, August 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  72. Theoretical study of nanofluids behavior at critical Rayleigh numbers

    Article • Journal of Thermal Analysis and Calorimetry, August 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  73. Porous materials in building energy technologies—A review of the applications, modelling and experiments

    Article • Renewable and Sustainable Energy Reviews, August 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  74. Simulating phase change during the droplet deformation and impact on a wet surface in a square microchannel: An application of oil drops collision

    Article • The European Physical Journal Plus, August 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  75. A concise review on the role of nanoparticles upon the productivity of solar desalination systems

    Article • Journal of Thermal Analysis and Calorimetry, July 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  76. Effects of Rib Shapes on the Entropy Generation in a Ribbed Duct

    Article • Journal of Thermophysics and Heat Transfer, July 2018, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  77. Energy Consumption and Drying Time Optimization of Convective Drying for Performance Improvement: Response Surface Methodology and Lattice Boltzmann Method

    Article • Journal of Heat Transfer, June 2018, ASME International

    Dr Javad Abolfazli Esfahani

  78. Entropy generation analysis for nanofluid flow inside a duct equipped with porous baffles

    Article • Journal of Thermal Analysis and Calorimetry, May 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  79. A review on the application, simulation, and experiment of the electrokinetic mixers

    Article • Chemical Engineering and Processing - Process Intensification, April 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  80. Steps optimization and productivity enhancement in a nanofluid cascade solar still

    Article • Renewable Energy, April 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  81. Second law of thermodynamics analysis for nanofluid turbulent flow inside a solar heater with the ribbed absorber plate

    Article • Journal of Thermal Analysis and Calorimetry, March 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  82. Enhancement of solar still by reticular porous media: Experimental investigation with exergy and economic analysis

    Article • Applied Thermal Engineering, February 2018, Elsevier

    Dr Javad Abolfazli Esfahani

  83. Effect of volumetric radiation on natural convection in a cavity with a horizontal fin using the lattice Boltzmann method

    Article • The European Physical Journal Plus, January 2018, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  84. Second law of thermodynamic analysis for nanofluid turbulent flow around a rotating cylinder

    Article • Journal of Thermal Analysis and Calorimetry, December 2017, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  85. Effect of flap installation on improving the homogeneity of the mixture in an induced-charge electrokinetic micro-mixer

    Article • Chemical Engineering and Processing - Process Intensification, November 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  86. Simulation of liquid reaction and droplet formation on a moving micro-object by lattice Boltzmann method

    Article • Meccanica, October 2017, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  87. Flow and Heat Management Around Obstacle by Nanofluid and Incidence Angle

    Article • Journal of Thermophysics and Heat Transfer, October 2017, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  88. Lattice Boltzmann Simulation of Turbulent Natural Convection: Enclosure Heated from Below

    Article • Journal of Thermophysics and Heat Transfer, October 2017, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  89. Applications of magnetohydrodynamics in biological systems-a review on the numerical studies

    Article • Journal of Magnetism and Magnetic Materials, October 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  90. Enhancement of propulsive performance of flapping foil by fish-like motion pattern

    Article • Computers & Fluids, October 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  91. Flutter, limit cycle oscillation, bifurcation and stability regions of an airfoil with discontinuous freeplay nonlinearity

    Article • Nonlinear Dynamics, September 2017, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  92. Partitioning of solar still for performance recovery: Experimental and numerical investigations with cost analysis

    Article • Solar Energy, September 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  93. Thermo-hydraulic analysis for a novel eccentric helical screw tape insert in a three dimensional tube

    Article • Applied Thermal Engineering, September 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  94. Spatial entropy generation analysis for the design improvement of a single slope solar still

    Article • Environmental Progress & Sustainable Energy, August 2017, Wiley

    Dr Javad Abolfazli Esfahani

  95. Comparison of experimental data, modelling and non-linear regression on transport properties of mineral oil based nanofluids

    Article • Powder Technology, July 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  96. Thermo-fluid performance and entropy generation analysis for a new eccentric helical screw tape insert in a 3D tube

    Article • Chemical Engineering and Processing - Process Intensification, July 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  97. A lattice Boltzmann method to simulate combined radiation–force convection heat transfer mode

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, June 2017, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  98. A review on the applications of porous materials in solar energy systems

    Article • Renewable and Sustainable Energy Reviews, June 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  99. Influences of wavy wall and nanoparticles on entropy generation over heat exchanger plat

    Article • International Journal of Heat and Mass Transfer, June 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  100. Appropriate position of porous insert in a heat exchanger by thermohydraulic analysis

    Article • Heat Transfer-Asian Research, May 2017, Wiley

    Dr Javad Abolfazli Esfahani

  101. A two-way couple of Eulerian-Lagrangian model for particle transport with different sizes in an obstructed channel

    Article • Powder Technology, May 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  102. Experimental investigation of wet flue gas condensation using twisted tape insert

    Article • International Journal of Heat and Mass Transfer, May 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  103. Convective Heat Transfer and Particle Motion in an Obstructed Duct with Two Side by Side Obstacles by Means of DPM Model

    Article • Applied Sciences, April 2017, MDPI AG

    Dr Javad Abolfazli Esfahani

  104. Influences of corrugation profiles on entropy generation, heat transfer, pressure drop, and performance in a wavy channel

    Article • Applied Thermal Engineering, April 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  105. Effect of nanoparticles on condensation of humid air in vertical channels

    Article • International Journal of Thermal Sciences, February 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  106. Combined Radiation/Natural Convection in a Participating Medium Using Novel Lattice Boltzmann Method

    Article • Journal of Thermophysics and Heat Transfer, January 2017, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  107. Optimum Interaction Between Magnetohydrodynamics and Nanofluid for Thermal and Drag Management

    Article • Journal of Thermophysics and Heat Transfer, January 2017, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  108. Exergy analysis for a plate-fin triangular duct enhanced by a porous material

    Article • Applied Thermal Engineering, January 2017, Elsevier

    Dr Javad Abolfazli Esfahani

  109. Lattice Boltzmann simulation of 3-dimensional natural convection heat transfer of CuO/water nanofluids

    Article • Thermophysics and Aeromechanics, January 2017, Pleiades Publishing Ltd

    Dr Javad Abolfazli Esfahani

  110. Application of magnetohydrodynamics for suppressing the fluctuations in the unsteady flow around two side-by-side circular obstacles

    Article • The European Physical Journal Plus, December 2016, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  111. Condensation process and phase-change in the presence of obstacles inside a minichannel

    Article • Meccanica, November 2016, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  112. Vortex shedding suppression and wake control: A review

    Article • Ocean Engineering, November 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  113. Sensitivity Analysis for Entropy Generation in Porous Solar Heat Exchangers by RSM

    Article • Journal of Thermophysics and Heat Transfer, October 2016, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  114. A salient reduction of energy consumption and drying time in a novel PV-solar collector-assisted intermittent infrared dryer

    Article • Solar Energy, October 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  115. Green's function method (GFM) and mathematical solution for coupled equations of transport problem during convective drying

    Article • Journal of Food Engineering, October 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  116. Optimization of partitioning inside a single slope solar still for performance improvement

    Article • Desalination, October 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  117. Effects of trap and reflect particle boundary conditions on particle transport and convective heat transfer for duct flow - A two-way coupling of Eulerian-Lagrangian model

    Article • Applied Thermal Engineering, September 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  118. Minimization of exergy losses in a trapezoidal duct with turbulator, roughness and beveled corners

    Article • Applied Thermal Engineering, August 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  119. Recovery of drop in heat transfer rate for a rotating system by nanofluids

    Article • Journal of Molecular Liquids, August 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  120. New Design of Ranque–Hilsch Vortex Tube: Helical Multi-Intake Vortex Generator

    Article • Journal of Thermophysics and Heat Transfer, July 2016, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  121. Large eddy simulation of the flameless oxidation in the IFRF furnace with varying inlet conditions

    Article • International Journal of Spray and Combustion Dynamics, June 2016, SAGE Publications

    Reza Kamali, Dr Javad Abolfazli Esfahani

  122. Erratum to: Taguchi design of three dimensional simulations for optimization of turbulent mixed convection in a cavity

    Article • Meccanica, June 2016, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  123. Magnetohydrodynamic effects on flow structures and heat transfer over two cylinders wrapped with a porous layer in side

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, June 2016, Emerald

    Dr Javad Abolfazli Esfahani

  124. An experimental investigation on productivity and performance of a new improved design portable asymmetrical solar still utilizing thermoelectric modules

    Article • Energy Conversion and Management, June 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  125. Control of wake destructive behavior for different bluff bodies in channel flow by magnetohydrodynamics

    Article • The European Physical Journal Plus, June 2016, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  126. Discrete particle model for convective AL 2 O 3 –water nanofluid around a triangular obstacle

    Article • Applied Thermal Engineering, May 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  127. Taguchi design of three dimensional simulations for optimization of turbulent mixed convection in a cavity

    Article • Meccanica, April 2016, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  128. The power extraction by flapping foil hydrokinetic turbine in swing arm mode

    Article • Renewable Energy, April 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  129. Control of flow around a circular cylinder wrapped with a porous layer by magnetohydrodynamic

    Article • Journal of Magnetism and Magnetic Materials, March 2016, Elsevier

    Professor YuanTong GU, Dr Javad Abolfazli Esfahani, Dr Suvash C. Saha

  130. Experimental investigation of nanofluid free convection over the vertical and horizontal flat plates with uniform heat flux by PIV

    Article • Advanced Powder Technology, March 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  131. Opposition of Magnetohydrodynamic and AL2O3–water nanofluid flow around a vertex facing triangular obstacle

    Article • Journal of Molecular Liquids, March 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  132. Sensitivity Analysis of Entropy Generation in Nanofluid Flow inside a Channel by Response Surface Methodology

    Article • Entropy, February 2016, MDPI AG

    Dr Javad Abolfazli Esfahani

  133. Numerical Stabilization of Three-Dimensional Turbulent Natural Convection Around Isothermal Cylinder

    Article • Journal of Thermophysics and Heat Transfer, January 2016, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  134. Entropy generation analysis of free convection from a constant temperature vertical plate using similarity solution

    Article • Thermal Science, January 2016, National Library of Serbia

    Dr Javad Abolfazli Esfahani

  135. Heat transfer enhancement and pressure drop penalty in porous solar heaters: Numerical simulations

    Article • Solar Energy, January 2016, Elsevier

    Dr Javad Abolfazli Esfahani

  136. Capturing Non-equilibrium Effects of Micro/Nano Scale Gaseous Flow Using a Novel Lattice Boltzmann Model

    Article • Journal of Statistical Physics, December 2015, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  137. Erratum to: Analytical two-dimensional modeling of hydrogen–air mixture in catalytic micro-combustor

    Article • Meccanica, October 2015, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  138. Effect of recess length on the flame parameters and combustion performance of a low swirl burner

    Article • Applied Thermal Engineering, October 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  139. Heat transfer enhancement and pressure drop penalty in porous solar heat exchangers: A sensitivity analysis

    Article • Energy Conversion and Management, October 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  140. The effect of magnetic field on instabilities of heat transfer from an obstacle in a channel

    Article • Journal of Magnetism and Magnetic Materials, October 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  141. fluid-porous interface conditions

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, September 2015, Emerald

    Dr Javad Abolfazli Esfahani

  142. Simulation of power extraction from tidal currents by flapping foil hydrokinetic turbines in tandem formation

    Article • Renewable Energy, September 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  143. Proposed kinematic model for fish-like swimming with two pitch motions

    Article • Ocean Engineering, August 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  144. Structural optimization of nanofluid flow around an equilateral triangular obstacle

    Article • Energy, August 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  145. Control of wake and vortex shedding behind a porous circular obstacle by exerting an external magnetic field

    Article • Journal of Magnetism and Magnetic Materials, July 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  146. CONTROL OF WAKE AND VORTEX SHEDDING BEHIND SOLID CIRCULAR OBSTACLE BY MAGNETOHYDRODYNAMICS

    Article • Journal of Thermal Engineering, July 2015, Journal of Thermal Engineering

    Dr Javad Abolfazli Esfahani

  147. Control of Wake Structure Behind a Square Cylinder by Magnetohydrodynamics

    Article • Journal of Fluids Engineering, June 2015, ASME International

    Dr Javad Abolfazli Esfahani

  148. Enhancement of heat transfer by nanofluids and orientations of the equilateral triangular obstacle

    Article • Energy Conversion and Management, June 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  149. Three-dimensional analytical solution for transport problem during convection drying using Green's function method (GFM)

    Article • Applied Thermal Engineering, June 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  150. Analytical Modeling of Hydrogen–Air Mixture in a Catalytic Microchannel

    Article • Journal of Thermophysics and Heat Transfer, April 2015, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  151. Estimation of convective heat transfer coefficient and water-productivity in a tubular solar still – CFD simulation and theoretical analysis

    Article • Solar Energy, March 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  152. Analytical two-dimensional modeling of hydrogen–air mixture in catalytic micro-combustor

    Article • Meccanica, February 2015, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  153. Fluid structures of flapping airfoil with elliptical motion trajectory

    Article • Computers & Fluids, February 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  154. Entropy generation analysis of squeeze film air damping in torsional micromirrors

    Article • Optik, January 2015, Elsevier

    Dr Javad Abolfazli Esfahani

  155. Numerical Study of Entropy Generation in the Flameless Oxidation Using Large Eddy Simulation Model and OpenFOAM Software

    Article • International Journal of Thermodynamics, December 2014, International Centre for Applied Thermodynamics (ICAT)

    Dr Javad Abolfazli Esfahani

  156. Numerical Investigation of the Flameless Oxidation of Natural Gas in the IFRF Furnace Using Large Eddy Simulation

    Article • International Journal of Spray and Combustion Dynamics, December 2014, SAGE Publications

    Dr Javad Abolfazli Esfahani

  157. Numerical Investigation of MILD Combustion Using Multi-Environment Eulerian Probability Density Function Modeling

    Article • International Journal of Spray and Combustion Dynamics, December 2014, SAGE Publications

    Dr Javad Abolfazli Esfahani

  158. Effect of acceleration on dynamic stall of airfoil in unsteady operating conditions

    Article • Wind Energy, November 2014, Wiley

    Dr Javad Abolfazli Esfahani

  159. Heat transfer and fluid characteristics of rarefied flow in thermal cavities

    Article • Vacuum, November 2014, Elsevier

    Dr Javad Abolfazli Esfahani

  160. Modeling of gas release following pipeline rupture: Proposing non-dimensional correlation

    Article • Journal of Loss Prevention in the Process Industries, November 2014, Elsevier

    Dr Javad Abolfazli Esfahani

  161. Two relaxation time lattice Boltzmann equation for high Knudsen number flows using wall function approach

    Article • Microfluidics and Nanofluidics, June 2014, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  162. The analytical modeling of propane-oxygen mixture at catalytic micro-channel

    Article • Heat and Mass Transfer, April 2014, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  163. Two-dimensional analytical model of flame characteristic in catalytic micro-combustors for a hydrogen–air mixture

    Article • International Journal of Hydrogen Energy, March 2014, Elsevier

    Dr Javad Abolfazli Esfahani

  164. Analytical two-dimensional analysis of the transport phenomena occurring during convective drying: Apple slices

    Article • Journal of Food Engineering, February 2014, Elsevier

    Dr Javad Abolfazli Esfahani

  165. Extension of the SBT-TAS algorithm to curved boundary geometries

    Article • January 2014, American Institute of Physics

    Dr Javad Abolfazli Esfahani

  166. Exergetic performance of a cylindrical methane-air microcombustor under various inlet conditions

    Article • International Journal of Exergy, January 2014, Inderscience Publishers

    Dr Javad Abolfazli Esfahani

  167. Two relaxation time lattice Boltzmann model for rarefied gas flows

    Article • Physica A Statistical Mechanics and its Applications, January 2014, Elsevier

    Dr Javad Abolfazli Esfahani

  168. Comparative investigations on the effect of angle of attack profile in performance of bio-inspired propulsion (flapping foil)

    Article • Journal of Naval Architecture and Marine Engineering, December 2013, Bangladesh Journals Online (BanglaJOL)

    Dr Javad Abolfazli Esfahani

  169. Lattice Boltzmann simulation of viscous-fluid flow and conjugate heat transfer in a rectangular cavity with a heated moving wall

    Article • Thermophysics and Aeromechanics, October 2013, Pleiades Publishing Ltd

    Dr Javad Abolfazli Esfahani

  170. Effect of caudal on hydrodynamic performance of flapping foil in fish-like swimming

    Article • Applied Ocean Research, August 2013, Elsevier

    Dr Javad Abolfazli Esfahani

  171. Accuracy analysis of predicted velocity profiles of laminar duct flow with entropy generation method

    Article • Applied Mathematics and Mechanics, July 2013, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  172. Entropy Generation of Conjugate Natural Convection in Enclusures: The Lattice Boltzmann Method

    Article • Journal of Thermophysics and Heat Transfer, July 2013, American Institute of Aeronautics and Astronautics (AIAA)

    Dr Javad Abolfazli Esfahani

  173. Lattice-Boltzmann simulation of forced convection over an electronic board with multiple obstacles

    Article • Heat Transfer Research, January 2013, Begell House

    Dr Javad Abolfazli Esfahani

  174. A novel approach to evaluate the temperature during drying of food products with negligible external resistance to mass transfer

    Article • Journal of Food Engineering, January 2013, Elsevier

    Dr Javad Abolfazli Esfahani

  175. A numerical study on shear layer behaviour in flow over a square unit of four cylinders at Reynolds number of 200 using the LB method

    Article • Progress in Computational Fluid Dynamics An International Journal, January 2013, Inderscience Publishers

    Dr Javad Abolfazli Esfahani

  176. Productivity estimation of a single-slope solar still: Theoretical and numerical analysis

    Article • Energy, January 2013, Elsevier

    Dr Javad Abolfazli Esfahani

  177. Second law analysis of micro/nano Couette flow using direct simulation Monte Carlo method

    Article • International Journal of Exergy, January 2013, Inderscience Publishers

    Dr Javad Abolfazli Esfahani

  178. Optimizing the Shape of Rotor Blades for Maximum Power Extraction in Marine Current Turbines

    Article • International Journal of Automotive and Mechanical Engineering, December 2012, Universiti Malaysia Pahang Publisher

    Dr Javad Abolfazli Esfahani

  179. Estimation of convective heat transfer coefficient in a single-slope solar still: a numerical study

    Article • Desalination and Water Treatment, December 2012, Taylor & Francis

    Dr Javad Abolfazli Esfahani

  180. The Normalized Analysis of a Surface Heterogeneous Reaction of a Propane/Air Mixture into a Micro-Channel

    Article • Chinese Physics Letters, December 2012, Institute of Physics Publishing

    Dr Javad Abolfazli Esfahani

  181. Similarity Solution for Unsteady Free Convection From a Vertical Plate at Constant Temperature to Power Law Fluids

    Article • Journal of Heat Transfer, August 2012, ASME International

    Dr Javad Abolfazli Esfahani

  182. Entropy generation of forced convection film condensation on a horizontal elliptical tube

    Article • Comptes Rendus Mécanique, July 2012, Elsevier

    Dr Javad Abolfazli Esfahani

  183. LB simulation of heat transfer in flow past a square unit of four isothermal cylinders

    Article • Comptes Rendus Mécanique, July 2012, Elsevier

    Dr Javad Abolfazli Esfahani

  184. Mathematical simulation of convective drying: Spatially distributed temperature and moisture in carrot slab

    Article • International Journal of Thermal Sciences, June 2012, Elsevier

    Dr Javad Abolfazli Esfahani

  185. Compressibility and rarefaction effects on entropy and entropy generation in micro/nano Couette flow using DSMC

    Article • Journal of Physics Conference Series, May 2012, Institute of Physics Publishing

    Dr Javad Abolfazli Esfahani

  186. Investigation of basic molecular gas structural effects on hydrodynamics and thermal behaviors of rarefied shear driven micro/nano flow using DSMC

    Article • International Communications in Heat and Mass Transfer, March 2012, Elsevier

    Dr Javad Abolfazli Esfahani

  187. Laminar Film Condensation on a Nanosphere

    Article • Journal of Nanotechnology in Engineering and Medicine, February 2012, ASME International

    Dr Javad Abolfazli Esfahani

  188. Experimental study of a novel portable solar still by utilizing the heatpipe and thermoelectric module

    Article • Desalination, January 2012, Elsevier

    Dr Javad Abolfazli Esfahani

  189. Double Diffusive Natural Convection Heat Transfer Enhancement in a Square Enclosure Using Nanofluids

    Article • Journal of Nanotechnology in Engineering and Medicine, May 2011, ASME International

    Dr Javad Abolfazli Esfahani

  190. Mathematical modeling of convective drying: Lumped temperature and spatially distributed moisture in slab

    Article • Energy, April 2011, Elsevier

    Dr Javad Abolfazli Esfahani

  191. The Investigation of Semi-Three-Dimensional Heat Transfer Modeling in Microcombustors

    Article • Journal of Thermal Science and Engineering Applications, March 2011, ASME International

    Dr Javad Abolfazli Esfahani

  192. Utilization of thermoelectric cooling in a portable active solar still — An experimental study on winter days

    Article • Desalination, March 2011, Elsevier

    Dr Javad Abolfazli Esfahani

  193. A new solution approach for simultaneous heat and mass transfer during convective drying of mango

    Article • Journal of Food Engineering, February 2011, Elsevier

    Dr Javad Abolfazli Esfahani

  194. Effect of non-uniform heating on entropy generation for the laminar developing pipe flow of a high Prandtl number fluid

    Article • Energy Conversion and Management, November 2010, Elsevier

    Dr Javad Abolfazli Esfahani

  195. SU-GG-T-378: A Monte Carlo Simulation Method for Treatment Planning Optimization of Eye Plaques Using MCNP4C Code

    Article • Medical Physics, June 2010, Wiley

    Dr Javad Abolfazli Esfahani

  196. A Lattice Boltzmann Simulation of Cross-Flow Around Four Cylinders in a Square Arrangement

    Article • January 2010, ASME International

    Dr Javad Abolfazli Esfahani

  197. The effects of rate of expansion and injection of water droplets on the entropy generation of nucleating steam flow in a Laval nozzle

    Article • Heat and Mass Transfer, May 2009, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  198. Entropy generation analysis in error estimation of an approximate solution: A constant surface temperature semi-infinite conductive problem

    Article • Thermal Science, January 2009, National Library of Serbia

    Dr Javad Abolfazli Esfahani

  199. Experimental and scale up study of the flame spread over the PMMA sheets

    Article • Thermal Science, January 2009, National Library of Serbia

    Dr Javad Abolfazli Esfahani

  200. Shape Optimization of a Nozzle with Specified Flow Field Including Viscosity Effect

    Article • Acta Applicandae Mathematicae, June 2008, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  201. Interactive effect of oxygen diffusion and volatiles advection on transient thermal degradation of poly methyl methacrylate (PMMA)

    Article • Heat and Mass Transfer, July 2007, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  202. On an optimal shape design problem to control a thermoelastic deformation under a prescribed thermal treatment

    Article • Applied Mathematical Modelling, April 2007, Elsevier

    Dr Javad Abolfazli Esfahani

  203. Effect of char layer on transient thermal oxidative degradation of polyethylene

    Article • Thermal Science, January 2007, National Library of Serbia

    Dr Javad Abolfazli Esfahani

  204. On the sensitivity of dimensional stability of high density polyethylene on heating rate

    Article • eXPRESS Polymer Letters, January 2007, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Dr Javad Abolfazli Esfahani

  205. The effect of surface regression on the downward flame spread over a solid fuel in a quiescent ambient

    Article • Thermal Science, January 2007, National Library of Serbia

    Dr Javad Abolfazli Esfahani

  206. Downward flame spread over PMMA sheets in quiescent air: Experimental and theoretical studies

    Article • Fire Safety Journal, March 2006, Elsevier

    Dr Javad Abolfazli Esfahani

  207. The effect of radiation on the laminar natural convection induced by a line heat source

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, January 2006, Emerald

    Dr Javad Abolfazli Esfahani

  208. Slot nozzle design with specified pressure in a given subregion by using embedding method

    Article • Applied Mathematics and Computation, September 2005, Elsevier

    Dr Javad Abolfazli Esfahani

  209. One-dimensional numerical model for degradation and combustion of polymethyl methacrylate

    Article • Heat and Mass Transfer, May 2005, Springer Science + Business Media

    Dr Javad Abolfazli Esfahani

  210. Existence of turbulent behavior for non-chaotic two dimensional jets

    Article • Journal of Mathematical Analysis and Applications, May 2004, Elsevier

    Dr Javad Abolfazli Esfahani

  211. Oxygen-sensitive thermal degradationof pmma: A numerical study

    Article • Combustion Science and Technology, October 2002, Taylor & Francis

    Dr Javad Abolfazli Esfahani

  212. Ignition of epoxy by a high radiation source. A numerical study

    Article • International Journal of Thermal Sciences, April 1999, Elsevier

    Dr Javad Abolfazli Esfahani