All Stories

  1. Tuning absorption bandwidth of single-phase Co–Zn–Ti ferrite via Fe3+ doping for microwave absorption
  2. The influence of Zr in the AlCrMoNbZr high-entropy alloy on the mechanical strength and corrosion resistance as a nuclear fuel cladding material
  3. Assessing the neutron shielding potential of coconut shell and zircon sand: showcasing the potential effectiveness of zircon sand
  4. Enhanced microwave absorption in Ba0.6Sr0.4Fe12−xZnxO19 hexaferrites via impedance matching optimization for X-band radar applications
  5. Dielectric-dominated microwave absorption in solvent-free SnO2/polyaniline composites prepared by dry manual mixing
  6. Tuning phase purity, magnetic softness, and microwave absorption in Co0.75Ni0.25Ti0.975Y0.025O3 via controlled milling and sintering
  7. Enhanced Microwave Absorption in Ba₀.₆Sr₀.₄Fe₁₂₋ₓZnₓO₁₉ Hexaferrites via Impedance Matching Optimization for X-Band Radar Applications
  8. Reducing power losses of solar panels by cooling with heatsink arrays and aloe vera plants as heat absorbers
  9. Magnetic-dielectric loss response and tunable magnetic properties influencing microwave absorption in single-phase zinc-doped Cobalt ferrite
  10. Enhanced thermoelectric performance in Fe₂CrAl1−2xNixSnx Heusler alloys through co-doping and electronic structure optimization
  11. Structural and synergistic effect of SnO₂-carbon interfaces for improved lithium-ion battery anode performance
  12. Synthesis and Characterization of Hybrid Teak Wood/Water Hyacinth Reinforced Polyester Composites for Eco-Friendly Motorcycle-Brake Pad Application
  13. Synthesis of SiC–SiO 2 nanocomposites using a simple mechanical milling and their microwave absorption performance
  14. Degradation of Crosslinked PVC/Titanium Oxide Nanocomposites Under Gamma Irradiation
  15. The High Dielectric Loss Tangent of Zinc-Doped Cobalt Titanate and Its Correlation with Microwave Absorption Performance in the S-Band Frequency
  16. The Addition of Yttrium Ions Doping to Increase the Stability of Particle Size and its Effect on the Magnetic Properties and Reflection Loss in the Co0.5Ni0.5Ti(1−x)YxO3
  17. Cationic distribution analysis of lanthanum doped Cobalt nickel titanate as microwave absorbing material and its correlation with weak ferromagnetic behavior
  18. Radar absorbing material of Co1-xCuxFe2O4: Structural, magnetic properties and absorption characteristic
  19. Structural, Dielectric, and Magnetic Characterization of Ba<sub>0.6</sub>Sr<sub>0.4</sub>Fe<sub>11.50</sub>Al<sub>0.50</sub>O<sub>19</sub>/MoS<sub>2</sub> Composite
  20. Hard-Soft Magnetic Composite as Microwave Absorber in S-Band and C-Band
  21. Effect of nickel doping in cobalt titanate on structural and magnetic properties for microwave-absorbing application
  22. Effect of gamma radiation on semi-crystalline polyvinyl chloride polymer for low-voltage cable insulator
  23. Design a body mass index monitoring with telegram notifications based on IoT
  24. Preparation, Synthesis, and Characterization of Hydroxyapatite from Bovine Bones Through Alkaline Hydrothermal Method
  25. Structure, Electrical, and Magnetic Properties of Hexaferrite/Molybdenum Disulfide Composite
  26. Synergistic Effects of Active Sites and Pore Structure in SnO₂@Carbon Composites for Enhanced Lithium-Ion Battery Anode Performance
  27. Synergistic Effects of Active Sites and Pore Structure in Sno₂@Carbon Composites for Enhanced Lithium-Ion Battery Anode Performance
  28. Microwave absorbing material of cobalt lanthanum ferrite: the contributions of intrinsic and extrinsic factors on the microwave absorption properties
  29. Improvement of microwave absorbing capability on the soft magnetic/hard magnetic/perovskite composites
  30. Study of Natural Herbal Dyes Photodegradation Effect to Optical Properties for Dye-Sensitized Solar Cells
  31. Non-destructive Analysis of Pamelo Citrus Fruit Maturity with Impedance Spectroscopy Method
  32. BAB 5 Peran Forensik Nuklir dalam ­Keamanan Nuklir
  33. Exploring the structural and magnetic properties of La-doped nickel ferrite for microwave absorbing application
  34. Preparation, synthesis and characterizations of La0.7Sr0.3Mn(1-y)Ni(y)O3 alloy
  35. Preparation, Synthesis and Characterization of La(1-x)Sr(x)MnO3 Alloy
  36. Implementation of Backpropagation Neural Network for Prediction Magnetocaloric Effect of Manganite
  37. Development of natural dye photosensitizers for dye-sensitized solar cells: a review
  38. Effect of porogen agent on the size, shape, and structure of porous hydroxyapatite scaffolds
  39. Properties and Evaluation of Functionalized Mixed Membrane Adsorbents for the Adsorption of Vanillic Acid from Palm Oil Waste
  40. The Impact of Al3+ ion substitution on microwave absorption of hexaferrite compound Ba0.6Sr0.4Fe12−xAlxO19 (x = 0.25, 0.50, 0.75, and 1.00)
  41. Mechanical characterization of SS304 as TRIGA reactor fuel cladding after cyclic oxidation at low temperatures
  42. Exploring the heat-treated ammonium diuranate fingerprint for nuclear forensics
  43. Phase formation prediction and analysis of multicomponent alloys AlCrFeNiM (M=Mo and Zr)
  44. Analysis of mechanical properties of short pin PWR dummy post irradiation
  45. Determination of crystallite size in synthetic hydroxyapatite using various methods based on x-ray diffraction
  46. Milling effect of hydroxyapatite bioceramic extracted from fish bone waste
  47. Nanocrystalline Sic–Sio2 Composites Synthesized Using a Simple Mechanical Milling Without Heat Treatment and Their Microwave Absorbing Performance
  48. Selection of Material and Manufacturing Technology for Batik Canting Stamps Based on Multi-Criteria Decision-Making Methods
  49. Structural and Electrochemical Analysis of SmBa0.8Sr0.2Co2O5+δ Cathode Oxide for IT-SOFCs
  50. Magnetic and Microwave Absorbing Properties of Cerium Substituted Zinc Ferrite Synthesized Using Milling Technique
  51. Enhanced Magnetic and Microwave Absorbing Properties of Nd3+ Ion Doped CoFe2O4 by Solid‐State Reaction Method
  52. Modified Pacitan bentonite with acid and thermal activation as a potential adsorbent for radionuclides: Characterization
  53. DESIGN OF PLC BASED TEMPERATURE CONTROL SYSTEM FOR FOOD STABILITY TEST CHAMBER
  54. Role of neodymium substitution on the structural, magnetic and microwave absorbing properties of nickel ferrites
  55. Using Android-Based E-Module to Improve Students’ Digital Literacy on Chemical Bonding
  56. Phase Composition of Sintered AlCrFeNi
  57. Approach toward strengthening strategy for nuclear fuel development in Indonesia
  58. Morphology and phase analysis of nitride layer on pure iron
  59. Progress and Evaluation of PWR Fuel Program in Indonesia
  60. Role of Neodymium Substitution on the Structural, Magnetic and Microwave Absorbing Properties of Nickel Ferrites
  61. Capability of Indonesian Hot cell Towards Pebble Bed Post Irradiation Examination
  62. Characteristics of surface roughness and microhardness of nitrided pure iron
  63. Antibacterial activities of synthesised Zno nanoparticles applied on reactive dyed batik fabrics
  64. Structural analysis on in situ high-temperature XRD of corundum
  65. Synthesis and characterization of electrospun fiber chitosan/polyvinyl alcohol/polyvinylpyrrolidone
  66. Synthesis and electrical conductivity of silicon carbide fiber as electronic semiconductor
  67. Influence of pyrolyzed temperature on the formation of silicon carbide fiber from polycarbosilane in electrospinning method
  68. Structural analysis of Al alloys for nuclear fuel cladding
  69. Analysis of Irradiated Pebble Bed Fuel Transfer System in Hot Cell 101 Radiometallurgy Installation
  70. Purification of Indonesian Natural Graphite by Acid Leaching Method as Nuclear Fuel Matrix: Physical Characterization
  71. Synthesis of Silicon Carbide Fiber as semiconductor substrate for Betavoltaic cell
  72. PLGA-Collagen Composite Synthesis with the Antibacterial Addition of Jatropha curcas L. Leaf Extract as Absorbable Surgical Suture Candidate
  73. Space and Time Distribution of Pu Isotopes inside The First Experimental Fuel Pin Designed for PWR and Manufactured in Indonesia
  74. Influence of intermetallic Fe and Co on crystal structure disorder and magnetic property of Ni50Mn32Al18 Heusler alloy
  75. Magnetic hysterysis evolution of Ni-Al alloy with Fe and Mn substitution by vacuum arc melting to produce the room temperature magnetocaloric effect material
  76. morphology SiOC fiber
  77. Study on Carbon-Coated LiMn0.7Fe0.3-xNixPO4 (0 ≤ x ≤ 0.15) as Cathode Material for Lithium Ion Batteries
  78. Synthesis and Characterization of Carbon-Coated LiFePO4 with Various Carbon Sources as Cathode Material for Lithium Ion Batteries through a Solid-State Process
  79. Characterization of Electrospinning Polycarbosilane Fiber with the Concentration of N,N-Dimethylformamide 22%, 24%, 26%, 28% and 30%
  80. Study on Polycarbosilane Fibers Cured by Thermal Process and Electron Beam Irradiation